Before using your new product, please read these instructions to prevent any damage.
WARNING: Unroll before use. Never plug in the LED lights when rolled up, as this can result in product damage or a fire.

Package contents

• LED tape light
• USB power supply
• Double-sided tape
• Quick Setup Guide

Features

• Produces custom lighting with 20 color options
• Attaches to TVs, cabinets, and other objects
• Adjust the brightness level with a multi-step dimmer
• Cuts to whatever length is needed
• Reduces eye strain from TVs and monitors
• Powered by USB or AC adapter
• Built and backed by Best Buy

Using your tape light

Shortening your tape light
• Use a pair of scissors to cut on a cut line. Cut lines are about 1.3 in. (3.3 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the center of the copper-colored pads, as shown.

Attaching your lights

1. Peel the adhesive backing off the lights, then adhere the lights where you want them.
2. Optional: Attach the double-sided tape to the back of the light control, then adhere it where you want it.
Notes:
• Make sure that the tape light is unrolled, otherwise, it can damage the tape light or cause a fire.
• Every surface is different, and additional adhesive may be used if the LED tape detaches from the surface. Small pieces of clear tape can be used.

Connecting to power

• Connect the USB connector to your USB power supply, then plug the USB power supply into a power outlet.

OR
• Connect the USB connector to your TV, computer, or other USB power source.

Adjusting the lights

If you turn off or unplug your tape light, it will remember your last brightness and color settings.
• Press (POWER) to turn the tape light on and off.
• Press (COLOR) repeatedly to change the color combination. There are 20 selectable colors, including white.
• Press (BRIGHT) repeatedly to adjust the brightness.
There are eight brightness levels.

Specifications

• USB power supply (included): 5V DC, 2A
• Power input: 5V DC, 0.5A minimum (2A recommended)
• Tape light length: 8 ft. (2.4 m)

Troubleshooting

LEDs will not turn on.

• Press the power button to make sure that your lights are turned on, then press (BRIGHT) to increase the brightness.
• Make sure that your lights are connected to a working USB port or power outlet. If connected to a computer, turn on your computer.
• Make sure that your lights are plugged into the USB power supply, then make sure that the USB power supply is plugged into a working power outlet.
• If your lights are plugged into a USB port on a TV, computer, or other devices and they are not working, use the included USB power supply.
• If you are trying to reach full brightness, especially with white light, use a 2A power supply. Your tape light will still function with lower-output power supplies, just at reduced brightness. Using the included USB power supply will ensure the best performance.
• LEDs flicker or turn on and off.
• Make sure that your lights are plugged into a working power outlet or USB port. Try plugging into a different power source.
• Use the included USB power supply for best performance.
• Make sure that the cable is not damaged.

Safety information

• To avoid damage to the light strip, do not sharply twist or bend the light strip 90°or more.
• Do not cut the silver solder markings. Only cut in the center of the copper-colored pads.
• Do not plug in your lights when they are coiled. This can generate excess heat which can damage the product or connected device.

Legal notices

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ICES statement:
CAN ICES-3 B/NMB-3 B

One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.

Contact Best Buy Essentials
For customer service, call 866-597-8427 (U.S. and Canada)
www.bestbuy.com/bestbuyessentials

Best Buy Essentials is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.

Compatibility

• Compatible with most mobile devices, including iPhones.
• Use with a standard USB-A to Lightning cable for Apple devices or a standard USB-A to USB-C cable for Android devices.

Features

• 10,000 mAh capacity charges smartphones, tablets, and more
• Slim design conveniently fits a pocket or purse
• USB ports (18 W total) recharge two devices at the same time
• QC 3.0 port for fast charging of compatible devices
• LED power indicators show your remaining battery level

●●●● 4 LEDs = 75-100% power
○●●● 3 LEDs = 50-75% power
○○●● 2 LEDs = 25-50% power
○○○● 1 LED = 5-25% power
○○○ Blinking LED = < 5% power
○○○○ If none of the LEDs light, your battery needs to be recharged

Press and hold the LED status button for three seconds to enter small charging current mode (<100 mA) to charge small current charging devices such as a Bluetooth earphone. Four LEDs blink one by one during this mode.
●○○○→○●○○→○○●○→○○○●
Your battery shuts down after two hours automatically. To exit this charging mode during the two hours, press and hold the button for three seconds.

Charging your portable battery

Fully charge your portable battery before using it for the first time. Charging takes about six and a half hours.

1. Plug the small end of the included USB cable into your battery’s USB IN port.
2. Plug the other end into a standard USB port on your computer, car charger, or wall charger (not included). Your portable battery automatically begins charging and the LED turns on.
   Note: All four LEDs turn on when your portable battery is fully charged.
   

Charging your devices

Note: You can charge two devices simultaneously.

1. Plug the large end of your phone’s charging USB cable into one of your battery’s USB ports. (Cable not included)
   Note: For the best performance, connect your device to the (QC 3.0) port for faster charging (on compatible devices).
2. Plug the other end into your device. Your portable battery automatically begins charging your device.
   WARNING: Do not charge devices while your portable battery is recharging.
   Note: Use with a standard USB-A to Lightning cable for Apple devices or a standard USB-A to USB-C cable for Android devices.
   

Specifications

• Dimensions (H × W × D):
  5.5 × 2.8 × 0.6 in.
  (14 × 7 × 1.6 cm)
• Input: Micro USB 5 V/2 A
• Output:
  USB A-1: 5 V/2.4 A
  USB A-2: 5 V/3 A; 9 V/2 A;
  12 V/1.5 A (QC 3.0)
• Total output: 18 W
• Built-in cell capacity:
  10,000 mAh, 3.7 V (37 Wh)
• Power bank capacity:
  6,000 mAh (5 V/2.4 A)
  5,950 mAh (5 V/3 A)
  3,100 mAh (9 V/2 A)
  2,300 mAh (12 V/1.5 A)

Power bank capacity will be less than built-in cell capacity. Performance will vary based on settings and environmental conditions, and will decrease over time and with use.

Safety information

• Do not expose your portable battery to heat, fire, or water.
• Do not modify, disassemble, open, drop, crush, puncture, or shred the internal battery.
• This is not a toy. Young children should be supervised to make sure that they do not play with the portable battery.
• Do not charge devices while the portable battery is recharging.
• Recharge the portable battery if it has not been used for more than 90 days.
• Risk of fires and burns. Do not open, crush, heat above 140° F (60° C), or incinerate. Follow the manufacturer’s instructions.
• Operating environment temperatures: 32 ~ 104° F (0 ~ 40° C)

This product is safe for regular use under normal conditions. As with any device using electrical power, some situations may be unsafe and injuries or damages could result. To minimize or avoid unsafe conditions, read and follow the instructions before using.

Warning

When using this product, basic precautions should always be followed, including the following:

1. Read all the instructions before using the product.
2. To reduce the risk of injury, close supervision is necessary when the product is used near children.
3. Do not put fingers or hands into the product.
4. Do not expose the battery to liquids.
5. Do not use the battery in excess of its output rating.
   Overloaded outputs above that rating may result in a risk of fire or injury to persons.
6. Do not use a battery that is damaged or modified.
   Damaged or modified batteries may exhibit unpredictable behavior, resulting in fire, explosion, or risk of injury.
7. Do not disassemble the battery. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of injury to persons.
8. Do not expose a battery to fire or excessive temperature. Exposure to fire or temperature above 212° F (100° C) may cause an explosion.
9. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

Legal notices

Declaration of Conformity:
Brand name/model number:
Best Buy essentials BE-MMB10K22K
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Suppliers Name: Best Buy Purchasing, LLC. Suppliers Address (USA): 7601 Penn Ave South, Richfield, MN 55423 U.S.A. Suppliers phone number: 1-877-467-4289.

FCC Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Statement:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

ICES Statement
CAN ICES-3(B)/NMB-3(B)

One-year limited warranty

Visit www.bestbuy.com/bestbuyessentials for details.

Contact Best Buy essentials

For customer service, call 866-597-8427 (U.S. and Canada)
www.bestbuy.com/bestbuyessentials

Best Buy essentials is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.