Blueair 411 Air Purifier

General safety instructions

Remember, the 411+ is an electrical appliance. Please read these safety instructions carefully before use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The 411+ warranty applies only if the unit is used according to these instructions.

WARNING:
Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

General

WARNING:
To avoid hazardous conditions, only the manufacturer, a service center authorized by Blueair or similarly qualified persons shall replace the power cord, if damaged.
CAUTIONS:

• Use the power cable provided with your 411+ unit to plug directly into an appropriate, electrical outlet. (Refer to the rating label on your unit).
• Do not alter the plug in any way.
• Remember to always disconnect the power supply before servicing the unit.
• Do not use the unit if the power cable or plug is damaged or malfunctions in any manner.
• Keep the power cable away from heated surfaces.
• Do not sit on, stand or climb onto the unit or use the unit either as a table or for storage.
• Do not place any objects on top of the unit, block air outlets or intakes,or allow foreign objects to enter the unit as this may cause an electric shock or damage the unit.

Intended Use

CAUTIONS:

• Supervise children to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
  use of the appliance by a person responsible for their safety.

SYSTEM OVERVIEW

Blueprint

1. Touch button
2. Air outlet
3. Ion chamber
4. Fan blades
5. Fan holder
6. Fan motor
7. PCB (Printed Circuit Board)
8. Metal Frame
9. Rubber foot
10. Bottom lid
11. Bayonet connection
12. Locking handle
13. Main filter (Particle + Carbon filter or Sandwich filter)

411+ package

Options

• Particle + Carbon filter (replacement filter)
• Sandwich filter (replacement filter)
• Choice of color and design for the fabric pre-filter

Placement

Place the 411+ in an upright position on the floor in your room. Be sure to place the unit where it won’t be knocked over by any person or pet in the household.

Using the unit in your bedroom?:
After 7 seconds the light automatically dims, and speed control goes into sleep mode. When the light is dimmed down, tap once to activate button and tap one more time to change speed.

Placing the unit:

• Place the unit in a location where air can circulate freely in, out and around the unit.
• Do not place the unit closer than 10 cm (4”) from another object.
• Do not place the unit directly on or against soft furnishings such as bedding or linen.
• Make sure that the unit is placed in an upright position, standing on its circular rubber foot.
• Do not place the unit near sources of heat, such as radiators, fireplaces or ovens.
• Do not place the unit near wet areas, such as bathrooms or laundry rooms where it may come into contact with water.
• Do not place the unit outdoors.

Getting started

1. Plug in your 411+ air purifier.
2. Press the top button to turn the unit on. Adjust the speed setting to the required level (see “On/off and speed control”).

On/off and speed control

1. On/Low
   Press once to turn the unit on and set it to the recommended energy-efficient speed 1.
2. Medium
   Press twice to set to medium speed 2.
3. High
   Press three times to set to high speed 3.
4. Off
   Press a fourth time to turn the unit off.

INFORMATION
The indicator light(s) on the touch button indicate the select-ed speed for a period of 7 seconds. After 7 seconds the light(s) dim down indicating a a non-active speed control mode.Press the touch button once to reactivate on/off and speed control. The indicator light(s) light up and you can adjust the speed setting again. Moreover, 411+ has an Autostart feature. This means that 411+ will automatically restart at the set speed if a power failure occurs, the unit is unplugged or a power switch timer is used.

Filters

General information
An additional colored pre-filter is delivered in the package to both enhance the unit´s appearance and to initially capture any dust particles.
The main filter removes:

IMPORTANT
Use only genuine Blueair filters to ensure proper function of your unit and to qualify for full warranty coverage.

Vacuum or wash the pre-filter
Occasionally vacuum the exterior of the fabric pre-filter to remove any dust that has collected. Always unplug the unit before removing the fabric pre-filter.

1. Remove the pre-filter from the unit´s metal frame.
2. Wash the pre-filter in the washing machine, according to instructions on the pre-filter´s label.
3. Refit the pre-filter back onto the unit´s metal frame by guiding the elastic edge into the slot between the top cylinder and the metal frame.
4. Attach the bottom edge of the pre-filter onto the edge of the bottom lid.

Changing the main filter

1. When the indicator lights turn red (after 6 months of operation) it is recommended to change the main filter.
2. Turn off the unit and unplug it.
3. Remove the pre-filter from the unit´s metal frame.
4. Carefully place the unit upside down on a flat surface and open the bottom lid by rotating counter-clockwise whilst holding the unit.
5. Remove the lid from the unit.
6. Grip the handles on the main filter and pull upwards to remove the main filter from the unit.
7. Position the new main filter into the metal frame. Ensure that the filter retains its cylindrical shape by pressing it against the metal frame from inside the unit.
8. Replace the bottom lid by gently pushing it down and simultaneously rotating it clockwise to secure it back into the bayonet lock,
9. Turn the unit back into its correct position and place on the floor (see section “Placement”).
10. Plug and turn on the 411+ unit.
11. Press the touch button for a duration of 5 seconds to reset the filter replacement timer. This lets 411+ know that you have changed the filter. The indicator light flashes 3 times, and then changes from red to white.

IMPORTANT
Use only genuine Blueair filters to ensure proper function of your unit and to qualify for full warranty coverage.

General care

Take good care of your 411+ to ensure that it delivers optimal performance.

• During use vacuum the pre-filter occasionally to remove dust, or wash it on a gentle, low-temperature cycle in the washing machine.
• Change the main filter every six months, depending on the operating conditions. Remember to unplug the unit before changing the main filter.
• Occasionally wipe the top of the unit with a dry dust cloth.

Specifications

Certified ratings as stated are based on models with Particle+Carbon Filter for JOY S. Ratings may be affected by use of other Blueair filter models.Air changes per hour are calculated on the recommended room size, assuming 8-foot (2.4-m) ceilings. For smaller rooms, the air changes per hour will increase.Depending on air quality in the area of use, the recommended six-month filter lifetime may be longer.

Blueair Blue Pure 211+ Auto

Blueair Blue Pure 211+ Auto

Please read this user manual carefully and keep it for future reference.
The latest version of this user manual can be found on www.blueair.com

Note: There may be local variations of these models.

• Product name: 211+ Auto
• Model number: 3631101000

Blue Pure 211+ Auto

The air purifier has a pre-filter and a HEPA Silent™ main filter to purify air. It has control functions and a built-in sensor.
The air purifier is mainly composed of a motor, a fan and filters. The air purifier removes contaminants from the air in a room to improve indoor air quality. You can change the air purifier settings at any time, using the control panel on the air purifier.
Recommendations for best performance

• Use the air purifier in a room that does not exceed the room size recommendation.
• Place the air purifier in a location where air can circulate freely in, out and around the air purifier.
• Do not place the air purifier closer than 4”/10cm to another object.
• During operation, keep doors and windows in the room with the air purifier closed.
• Only use genuine Blueair filters.
• Change the main filter when the filter replacement indicator appears on the control panel.
• Follow the maintenance instructions in this user manual.

Safety instructions

Blue Pure 211+ Auto air purifier is an electrical appliance for indoor use only, take the necessary precautions to reduce the risk of fire, electric shock or injury.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Supervise children to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Always disconnect the appliance from the power supply before maintenance.
• Do not attempt to open or service the appliance yourself. Service must be done by the manufacturer, service agent or similarly qualified personnel using only original Blueair spare parts.
• Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazard, a damaged power cable must always be replaced by the manufacturer, service agent or similarly
  qualified person.
• If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply and contact Blueair.
• The power plug must be firmly inserted in the power socket.
•  When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug.
• Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet
• Do not use an extension cord or a power strip. Refer to the rating label on your appliance.
• Do not alter the power plug in any way. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet.
• Do not use the included power cord for anything else but the appliance.
• Do not allow objects to enter or block the air inlets and air ou lets as this can cause electric shock or damage the appliance.
• Do not place any objects on top of or directly against the appliance.
• Do not sit on, stand, climb onto or hang from the appliance.
• Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fire.
• Keep the appliance and power plug away from water and other liquids.
• Keep the appliance and power plug away from chemicals such as pesticides and deodorants.
• Place the appliance on the floor. The appliance must be placed on a stable surface.
• Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms or pool areas.

Get started

Step 1
Plug the power cable into a wall outlet.

Step 2
Press the button to turn the air purifier on and adjust the fan speed mode.On/Off and fan speed controls

Available settings: Auto, Night, every day, Boost, and Off.
The indicator lights on the touch button indicate the selected fan speed. The lights automatically dim down completely 5 seconds after pressing the touch button, indicating a deactivated fan speed control mode. Press the touch button once to reactivate on/off and fan speed control. The indicator lights light up and you can adjust the fan speed mode again.
Autostart
The autostart feature automatically restarts the air purifier at the last set speed if it has been unplugged, used with a power switch timer, or if a power failure occurs.
Auto mode
In auto mode, the air purifier automatically controls the airflow based on air quality information from the sensor.

On/Auto mode		Press once to turn the unit On and to set it to Auto mode.
Night mode		Press twice to set to Night mode (low fan speed). All lights on the unit dim down after 5 seconds.
Everyday mode		Press three times to set to Everyday mode (medium fan speed).
Boost mode		Press four times to set to Boost mode (high fan speed).
Off		Press five times to turn the unit Off.

Air quality information
The air quality levels for particulate matter (PM) are indicated using a color scale on the air quality indicator. The air quality indicator is completely dimmed in Night mode.
PM2.5, Particulate matter, particles with a diameter of size 2.5 micrometers or less.

Air quality level (PM 2.5)

Filters

The air purifier is delivered with a fabric pre-filter and the main filter. The filters purify the air from both particles and gases. For best performance, clean the pre-filter regularly and change the main filter when the air purifier indicates filter change.
To find the right main filter for your air purifier, use the Blueair app or visit www.blueair.com.  The model number of your air purifier can be found on the rating label on the air purifier.
Note: Using a fabric pre-filter is optional.
Important! Always turn off and disconnect the appliance from the power supply before
changing filters, cleaning or carrying out maintenance procedures.
Blueair filter subscription program
Use the Blueair app or visit www.blueair.com to sign up for the Blueair filter subscription program.

Button control functions

Change filter
When the indicator light turns red (after 6 months of operation) you should change the main filter.

Filter replacement indicator
Press the button down for 7 seconds to reset the filter replacement indicator.

Clean and change the pre-filter
For best performance, clean the pre-filter regularly. Vacuum the exterior of the fabric prefilter with a soft brush attachment to remove dust. If the pre-filter requires a deeper clean, wash it in the washing machine, according to instructions on the pre-filters label.
Important! Press the Velcro strips together on the pre-filter before machine wash.

Step 1
Turn the unit off and unplug it.

Step 2
Gently press the buttons on both sides of the unit simultaneously.

Step 3
Remove the top part from the unit.

Step 4
Open the pre-filter panel and remove the pre-filter.

Step 5
Wash the pre-filter in the washing machine, according to instructions on the pre-filters label.

Step 6
Place the pre-filter back onto the unit. Adjust the pre-filter and the panel to hide the power cord in the back.

Step 7
Place the top back onto the unit and press until you hear a click.

Step 8
Plugin the unit.
Change the main filter

When changing the filter, vacuum any dust that may have accumulated inside the unit.
Important! Use only genuine Blueair filters suitable for the model to ensure proper function and performance of the air purifier, and to qualify for full warranty coverage.

Step 1
When the indicator light glows red, it’s time to change the main filter.
Step 2
Turn the unit off and unplug it.
Step 3
Gently press the buttons on both sides of the unit simultaneously.
Step 4
Remove the top part from the unit.
Step 5
Remove the old main filter from the unit. Unfold the new main filter and insert into the unit.
Step 6
Place the top part onto the bottom part of the unit. Firmly press the top part onto the metal filter frame until you hear a click.

Step 7
Plugin the unit.
Step 8
Press the touch button for a duration of 7 seconds to reset the filter replacement timer. This lets the air purifier know that you have hanged the filter. The indicator light flashes  for 4 seconds, and then
changes from red to white.

Care and maintenance

General

• Disconnect the air purifier from the power supply before maintenance.
• Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric shock or damage the air purifier.
• Never clean with gasoline, chemical solvents or corrosive materials as these agents may
• Make sure the air purifier is completely dry before connecting it to power.
• Do not wash the main filter. The main filter is not washable or reusable.

Cleaning

• Wash the pre-filter according to the instructions on the pre-filters label or vacuum the pre-filter with a soft brush attachment.
• Wipe the exterior of the air purifier with a soft, clean, damp cloth.
• Clean and check the power cable and power plug for wear or damages.
• Clean the sensor when changing the main filter.

Clean the air quality sensor
The inlet for the air quality sensor is located at the back of the air purifier.
Important! Do not use fingers or any unrecommended objects to clean inside the sensor inlet.

Step 1
Turn the unit off and unplug it.
Step 2
Gently press the buttons on both sides of the unit simultaneously.
Step 3
Remove the top part from
Step 4
Press the button on the unit. the inside of the unit to  pen the lid covering the sensor and remove the lid.
Step 5
Using circular motions, gently clean the sensor with a cotton swab, and attach the sensor lid.
Step 6
Place the top part onto the bottom part of the unit. Firmly press the top   part onto the metal filter frame until you hear a click.

Step 7
Plugin the unit.

Disposal and recycling

This air purifier should be disposed or recycled as electrical waste and the filter may be recycled as plastic. If you have questions regarding the disposal and recycling of this air purifier, please contact  your local recycling facility for availability or Blueair dealer and ask for the correct method of recycling.

Help and support

If you have questions about your product, please visit www.blueair.com or contact your local Blueair retailer.
To contact Blueair for personalized support, please visit www.blueair.com/customer-support

Warranty information

The Blueair Limited Warranty applies only if the air purifier is installed,  used and maintained according to the instructions in this manual.
For warranty conditions, please visit www.blueair.com/warranty
Warranty and returns
If you purchased the air purifier at one of our authorized retailers, please contact the same store to request assistance.

Specifications

Blue Pure 211+ Auto

• ¹Sound pressure according to GB/T18801 and GB4214.1
• ²According to ANSI/AHAM AC-1-2019. Tested without pre-filter.

Regulatory information

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

• www.blueair.com
• ADDRESS: Blueair AB Karlavägen 108 115 26 Stockholm Sweden
• Tel: +46 8 679 45 00
• [email protected]

DOWNLOAD RESOURCES

• Blueair Blue Pure 211+ Auto [pdf] User Manual Blue Pure 211 Auto
• Read more: https://manuals.plus/blueair/blue-pure-211-auto-manual#ixzz7d7Jc50zm

FAQ’S

Can I use the air purifier in a room that is larger than the room size recommendation?

No. The air purifier will not be able to remove enough contaminants from the air to improve indoor air quality.

Can I place the air purifier closer than 4”/10cm to another object?

No. The air purifier will not be able to remove enough contaminants from the air to improve indoor air quality.

Can I use the air purifier in a location where there is little or no airflow?

No. The air purifier will not be able to remove enough contaminants from the air to improve indoor air quality.

Can I use the control panel on the back of the main unit?

Yes, but it may cause some inconvenience when using it. We recommend using the control panel on top of the main unit.

How do I turn on or off the control panel on top of the main unit?

Press and hold for 3 seconds. Release when you hear a beep and see “OFF” or “ON” on the display panel.

How do I change modes with a touch button?

Press and release until you hear a beep and see “AUTO”, “HEPA”, “COOL” or “FAN” on the display panel. Release when you hear a beep and see “OFF” or “ON” on the display panel. If you want to change modes without hearing a beep, press and hold for 3 seconds. Release when you hear a beep and see “OFF” or “ON” on the display panel.

What’s the difference between Blueair 211+ and 211+ auto?

The upgraded, Auto version of the Blue Pure 211+ model features an integrated particle sensor, intuitive Auto mode setting, and 3-color LED air quality indicator.

Where is the best place to put an air purifier?

Placing your purifier near a window or close to a doorway is typically your best bet. Another reason to place purifiers near areas with a lot of airflow is that moving air has enough energy to lift dust, mold, and many other particles, which it can then distribute around your house.

Does the Blueair 211 auto have a HEPA filter?

Blueair’s HEPASilent dual filtration technology filters 99.97% airborne particles, like viruses and bacteria, dust, pollen, dander, and mold down to 0.1 micron, delivering more clean air, with less noise and energy used than HEPA filtration alone.

Do air purifiers use a lot of electricity?

Air purifiers do not use a lot of electricity. However, if used for a substantial amount of time, they can consume a considerable amount of electricity. As mentioned, the most common air purifier consumes 334.49 kWh of electricity per year. This assumes 16 hours in active mode and 8 hours in standby mode per day.

Do air purifiers cause sinus problems?

Headaches, sore throat, coughing, Asthma attacks, and difficulty breathing are a few of the symptoms that can be brought on by some air purifiers. Yes, that’s right. Your air purifier may actually aggravate many of the health issues you hoped it would solve.

How does Blueair auto work?

This dual filtration technology pioneered by Blueair combines electrostatic charging of particles and mechanical filtration along with a unique filter designed to produce more² clean air, cleaning your air much faster and more quietly³ than traditional HEPA filtration alone.

VIDEO

Blueair Blue Pure 211+ Auto
www://blueair.com/