Model:T Share
Welcome to your new Bluedio speaker
We appreciate your choice of Bluedio speaker. Before use, please read this user manual carefully and keep for future reference.
Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed ta the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome ta visit our official website: www.bluedio.com; Or to email us at [email protected]; Or ta call us at 400-B89–0123.
Speaker Overview
In the box
Charge and battery
- Charging cable: Use the included charging cable or the speaker may be damaged.
- Charger: If you use a charger for charging, its output DC voltage should be 5V±0.3V, and its output current should exceed 1 OOOmA
Charge the speaker:
The built-in battery of the speaker is rechargeable and non-detachable. Do not replace the battery.
- Tum off the speaker before charging.
- Connect the Type-C plug(lhe smaller plug) of the charging cable to the charging socket of the speaker; Connect the other plug to the USB socket of your computer or other charging device. When charging, you will see the red LED stays on.
- When fully charged(takes about 2-3 hours), you will see Iha blue LED stays on or the rad LED goes out.
Operation
Power on
Press and hold the MF Button until you hear”Power on” or you see the blue light blinks.
Power off
Press and hold the MF Button until you hear”Power off”.
Enter pairing mode
When the speaker is off, press and hold the M FBuntil you hear “Pairing”.
Pair the speaker with your mobile phone
- Keep the distance between the speaker and your mobile phone (or other device) within 1 meter.The closer, the better.
- Make sure the speaker enters pairing mode.(See instruction “Enter pairing mode”)
- Switch on the Bluetooth of your mobile phone,add/search devices.
- When ‘Bluedio T Share” appears, select it. (If asked for a pass code: Enter “OOOO’)
- Finish.
Using the speaker to talk (In Bluetoothmode)
Answer a call
When there is an incoming call, press the MF button once to answer it. Or use your mobile phone to answer it.
End a call
When you are on call, press the MF button once to end ii. Or use your mobile phone to end it.
Reject a call
When there is an incoming call, press and hold the MF button for 2 seconds to reject it. Or use your mobile phone to reject it.
Track/ Volume control (in Bluetooth mode)
Pause/Play: Press the MF button once
Previous track: Press and hold the Volume- button for about 3 seconds
Next track: Press and hold the Volume+ button for about 3 seconds
Volume Up: Press the Volume+ button
Volume Down: Press the Volume- button
Cloud function
The speaker supports Alibaba Cloud Computing and other cloud platform. Users can download the app by scanning the QR code on page 61 .
Wake up the cloud (have installed the cloud app on your phone)
Connect the speaker with your phone via Bluetooth; double-click the MF button.
Specifications
Bluetooth version: 5.0
Bluetooth transmission frequency: 2.4GHz lo 2.48GHz
Bluetooth operating range: up to 33 feet (free space)
Bluetooth profiles: A2DP, AVRCP, HSP, HFP
Frequency response: 50Hz-18,000Hz
Audio output power: 4W
Audio input: VRMSs1V
Standby time: 1000 hours
Music/talk time: 5 hours
Charging time: 2-3 hours for full charge
Operating temperature range: -10 “C to 50°C only
Please be noted specifications are subject to change without notice .
Bluedio T Share User ManualDownload
Questions about your Manual ? Post in the comments!
References
]]>Model: T7
Headphone Overview
Notes on usage and operation:
Power on / off
Toggle the power-on key of Bluetooth to control the power-on / power-off of the headset.
Bluetooth Pairing:
- The earphone will automatically enter the pairing mode after starting up.
- Start the Bluetooth of the mobile phone, search / add Bluetooth devices, and select ” T7″ among Bluetooth devices that founded( some devices need to enter the password ” 0000″).
- Headphones that have been successfully paired will automatically enter the reconnection mode after being turned on, and will automatically connect with the device that was successfully paired last time.
Music Control:
Click the multifunctional key to control the pause/play of music Click the key of volume up to increase the volume, and press and hold to switch to the next song. Click the key of volume down to lower the volume and press and hold to switch to the previous song.
Incoming Call Control
When there is a coming call, click the multifunctional key to answer the call, and click again to hang up the call. You can also tap the right shell of the earphone twice with your finger to answer the incoming call when someone calls in, and tap the right shell of the earphone twice again to hang up the call. When there is a incoming call, you can press and hold the multifunctional key to reject the call.
ANC Active Nolse-cancelIng:
Toggle the ANC active noise-canceling switch, the green indicator light will turn on for a long time and it means that the noise reduction feature will turn on. When the ANC switch is toggled again, the green indicator close down automatically, and it means that the noise reduction feature is turned off.
ANC Shift Switch:
Double-click the ANC shift switch to change the ANC gear position. (Shift between High and Low ) Note: ANC shift feature is only effective both in Bluetooth mode and ANC turned on. The default degree of ANC is high-level.
Intelligent Playback:
Taking off the earphone when playing music,the music being played will automatically pause , and when you put on the earphone again, the music will play automatically.
Line-In Musk Playing:
Use a 3.5mm to Type-C audio cable to connect headphones with mobile phones. computers and other devices to play music. Note: The headset must be turned off when using this feature. ( This product does not give away audio cable, if necessary, please purchase audio cable through Bluedio official store)
Line-out Music Playing
First, connect the headphone No. 1 with the mobile phone via Bluetooth, then turn off ANC feature, and use the 3.5mm to Type-C audio cable to connect the headphone No. 1 with the headphone No. 2 to play music.
Note: ANC must be turned off when using the above feature. Headset No. 2 must support a 3.5 connector. ( This product does not give away audio cable, if necessary, please purchase audio cable through Bluedio official store )
Charge Headset
Turn off the headphones before charging, and use the standard charging cable to charge. When charging, the red indicator will be on all the time. It takes 2 hours for the headphone to be fully charged, and the blue indicator will be on after it is fully charged.
Web services
This product supports web-services. Users can turn to the last page of the manual and scan the QR code with their mobile phones to download APP.
Wake – up web services ( Mobile Phone Installed with APP )
When both the mobile phone and APP are connected to the headset is Bluetooth, double-click the multifunctional key of the headset or tap the right shell of the headset twice to wake-up the feature,and then use the web-services feature and enjoy intelligent services.
Product Anti-forgery
Scrape off the anti-forgery sticker coating on the packaging box to obtain the anti-counterfeiting number of the product, then log on to the official website of www.bluedio.com and type-in the anti-counterfeiting number to check the authenticity of the product.
Consultation and Assistance
Please log on to www.bluedio.com to inquire about the relevant information and technical support of the product. If necessary, please send an email to [email protected] or call the after-sales hotline 400 – 889 – 0123.
Technical specifications:
Bluetooth Version: Bluetooth 5.0
Working Range: up to 10 meters (free space )
Frequency Range: 2.4GHz-2.48GHz
Support profiles: A2DP, AVRCP, HSP, HFP
Driver Unit: 57mm
Noise-cancellation Sensitivity: -25dB
Impedance: 160
Frequency Response Range: 20Hz-20KHz
Sound pressure level(SPL): 115dB
Standby Time: about 1000 hours
Music / Talk Time: about 30 Hours
Working time( For Only Running the ANC): about 40 hours
Charging time: about 2 hours
Operating temperature range: – 10 °C – 50 °C
Input Voltage / Current: 5V /> 500mA
Output Power: 50mW*50mW
Bluedio HS Neckband Portable Bluetooth Speaker
SPECIFICATIONS
- Brand: Bluedio
- Model Name: HS
- Speaker Type: Outdoor
- Connectivity Technology: Bluetooth
- Special Feature: Multiple connection mode–Bluetooth/FM/SD, Lightweight Neckband wearable
- Product Dimensions: 9.13 x 6.92 x 0.98 inches
- Item Weight: 1.12 ounces
- Item model number: HS
- Batteries: 1 Lithium Ion batteries are required. (included)
WHAT’S IN THE BOX
DESCRIPTION
HS Bluedio
Wireless Wearable Personal Body Speaker Neckband
a speaker that can be worn and loaded with features for an exceptional listening experience. When watching films, live visuals, or playing games, it creates the sensation that you are there in the moment. You are immersed in clear, rich music while also remaining conscious of your surroundings.
- Easily connect with Bluetooth 5.0
- FM mode with SD Card (max 32GB) support
- Durable & Transportable Design
- Integral Microphone for Hands-free Calling
- 2W*2 Speaker Stereo Output Built-In
- Your hands and ears must be free
If you wear this wearable Bluetooth speaker around your neck, you may listen to music as you cook or engage in outdoor activities like walking, cycling, or mountain climbing. You can keep in touch with the outside world while having your hands and ears free to listen to music and make calls. - Precise positioning when playing a game
TIPS: Bluedio HS can pair with your phone using Bluetooth, but not a gamepad. We only advise using it for playing games on your phone.
Are you frustrated that, when playing a game with an old-style speaker, you can never find the enemy’s location? Use the Bluedio HS wearable speaker to locate objects by using the left and right channels separately and the stereoscopic sound effect. - Create a Sound Zone for Yourself
When speakers are oriented upward and your ears are free, what you hear is amplified while the sounds around you are muted. While you are listening to music, you can maintain awareness of your surroundings. You can stay linked to your surroundings and your music with Bluedio HS. - Stable Bluetooth 5.0 Connection
With your Bluetooth devices, the newest Bluetooth 5.0 technology offers a solid connection range of up to 33 feet. Superior Bluetooth connectivity makes it simple to communicate hands-free. - Support for FM Mode and SD Cards
In addition to the most recent Bluetooth 5.0 technology, which links to smartphones, you can also utilize the TF/SD card (max 32G) slot to listen to your favorite music or the FM mode to stay current with the weather and other crucial information for your location. - Elegant Design and Ergonomics
A small stereo surround private music field is created by the ergonomic shape, which leans lightly on your shoulder to keep you comfortable while you listen all day.
FEATURES
- Bluetooth Speaker for the Neck
With this wearable Bluetooth speaker around your neck, you may enjoy music while cooking supper or engaging in outdoor activities like walking, cycling, mountain climbing, etc. without using your hands or ears. You can keep in touch with the outside world while having your hands and ears free to listen to music and make calls. - More Than Just Music in True Surround Sound
When speakers are oriented upward and your ears are free, what you hear is amplified while the sounds around you are muted. While you are listening to music, you can maintain awareness of your surroundings. You can stay linked to your surroundings and your music with Bluedio HS. - Multiple Connection Modes for Bluetooth Neckband Speaker
In addition to the most recent Bluetooth 5.0 technology, which links to smartphones, you can also utilize the TF/SD card (max 32G) slot to listen to your favorite music or the FM mode to stay current with the weather and other crucial information for your location. - Lightweight & Comfy Clothing
A small stereo surround private music field is created by the ergonomic shape, which leans lightly on your shoulder to keep you comfortable while you listen all day.
FREQUENTLY ASKED QUESTIONS
What is the connectivity technology of the Bluedio HS Neckband Portable Bluetooth Speaker?
The connectivity technology of the Bluedio HS Neckband Portable Bluetooth Speaker is Bluetooth.
What are the supporting protocols of the Bluedio HS Neckband Portable Bluetooth Speaker?
The supporting protocols of the Bluedio HS Neckband Portable Bluetooth Speaker are A2DP, AVRCP, HSP, and HFP.
What is the frequency response range of the Bluedio HS Neckband Portable Bluetooth Speaker?
The frequency response range of the Bluedio HS Neckband Portable Bluetooth Speaker is 20Hz-20KHz.
What is the standby/Bluetooth standby time of the Bluedio HS Neckband Portable Bluetooth Speaker?
The standby/Bluetooth standby time of the Bluedio HS Neckband Portable Bluetooth Speaker is about 1000 hours/300 hours.
What is the music/call time of the Bluedio HS Neckband Portable Bluetooth Speaker?
The music/call time of the Bluedio HS Neckband Portable Bluetooth Speaker is about 3-4 hours.
What is the input voltage/current of the Bluedio HS Neckband Portable Bluetooth Speaker?
The input voltage/current of the Bluedio HS Neckband Portable Bluetooth Speaker is 5V/≥500mA.
What is the output power of the Bluedio HS Neckband Portable Bluetooth Speaker?
The output power of the Bluedio HS Neckband Portable Bluetooth Speaker is 2*2W.
What are the dimensions and weight of the Bluedio HS Neckband Portable Bluetooth Speaker?
The dimensions of the Bluedio HS Neckband Portable Bluetooth Speaker are 9.13 x 6.92 x 0.98 inches and its weight is 1.12 ounces.
What is the Bluetooth version of the Bluedio HS Neckband Portable Bluetooth Speaker?
The Bluetooth version of the Bluedio HS Neckband Portable Bluetooth Speaker is 5.0.
What is included in the box with the Bluedio HS Neckband Portable Bluetooth Speaker?
The box includes the Bluedio HS Speaker, charge cable, and user manual.
Can the Bluedio HS Neckband Portable Bluetooth Speaker be used for gaming with a gamepad?
No, the Bluedio HS Neckband Portable Bluetooth Speaker cannot be used for gaming with a gamepad. It is only advised to use it for playing games on your phone.
What is the maximum capacity of the SD card that can be used with the Bluedio HS Neckband Portable Bluetooth Speaker?
The maximum capacity of the SD card that can be used with the Bluedio HS Neckband Portable Bluetooth Speaker is 32GB.
What is the Bluedio HS Neckband Portable Bluetooth Speaker?
The Bluedio HS is a portable Bluetooth speaker designed in a neckband style, allowing you to wear it comfortably around your neck and enjoy music or audio on the go.
What are the main features of the Bluedio HS speaker?
The main features of the Bluedio HS include Bluetooth connectivity, a neckband design, a built-in microphone for hands-free calls, extended battery life, and high-quality audio output.
How do I connect my device to the Bluedio HS speaker?
To connect your device, enable Bluetooth on your smartphone, tablet, or other compatible device. Then, search for available Bluetooth devices and select “Bluedio HS” to establish a connection.
What is the wireless range of the Bluedio HS speaker?
The wireless range of the Bluedio HS speaker is typically around 33 feet (10 meters), but it may vary depending on environmental factors.
]]>
Structural Sketch
Operational Instruction:
Tips Before Using:
Remove the earphone charging insulation sheet from the charging box, and then put the earphones back into the charging box and close it for charging.
Bluetooth pairing:
- Turn off Bluetooth on cellphone firstly.
- Open the charging box and you’ll see LED light on two earphones is flashing.
- Turn on Bluetooth on cellphone to search for “T Elf 2” and dick it to Connect.
Music control:
One dick touch button to control pause/play of music.
Double-dick the right earphone touch button to increase the volume, and three times click to switch to the next song.
Double-click the left earphone touch button to decrease the volume, and three times dick to switch to the previous song.
Call control:
One dick touch button to answer/ hangup the call, long press two seconds to reject the call.
Last redial:
Continuously dick four touch buttons and redial a call.
Voice assistant:
Press the touch button for a second and let go when you hear the prompt.
Face recognition:
When playing the music, remove earphones, then music will automatically stop playing. Put the earphones back on and the music will resume.
Solutions for the earphones’ malfunction:
Notice: Hearing sound in only one earphone or the other one cannot be connected, please do the following operations on both earphones.
- Turn off Bluetooth on cellphone.
- Long press touch button to turn on the left and right earphone separately, and then three times dick on both left earphone and right earphone so two earphones automatically shut down and pairing recording be removed.
3.Put two earphones back into the charging box and close cover. - Reopen the charging box and wait for LED light on two earphone to flash.
- The earphone restart and open Bluetooth on cellphone for pairing
Charging instructions:
Earphones Charging:
Put the earphones into the charging box and close cover. Blue light shows on charging case and it is always on when charging the case. LED light is off when fully charged.
Box Charging:
Green light shows on charging case and it is always on when charging the case. LED light is off when fully charged.
Charging Box Red Light Flashing:
Indicating low power, need to be charged.
Technical specifications Bluetooth version: 5.0
Frequency range: 2.4GHz-2.48GHz
Supporting protocols: A2DP, AVRCP, HSP, HFP
Frequency response range: 20Hz-20KHz
Standby time: about 1000 hours
Music / talk time: about 5-6 hours
Charging time: about 1 hour for headphones,about 2 hours for charging box
Input voltage / current: 5V/> 100mA
Output power: 7mW+7mW
Contact us
www.bluedio.com
[email protected]
020-36450093
Bluedio T-Elf 2 User ManualDownload
Questions about your Manual ? Post in the comments!
References
]]>Model: Bluedio Four
Line-in music playing:
You can listen to the music or chat on your device like phones or laptops through your headset by connecting the Type-C plug of the audio cable to the audio port of the headset and plugging The 3.5 mm jack into the audio port of your device.
Connecting to desktop PC with the audio cable:
- Plug the two 3.5 mm jacks of the Y-type converter
supplied wtth the audio coble respectively into the
audio port and MIC port of your desktop PC (the jack
with red ring plugged into the MIC port and the one
with green ring into the other port}. - Plug the 3.5 mm jack of lhe audio cable Into the
3.5 mm jack of the Y-type cooverter and the Type-C
plug into the audio port of your headset so as to
listen to the music or chart on your desktop PC with
the headset.
Purchase verification :
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome to visit our official website:
www.bluedio.com;
Or to email us at [email protected];
Or to cal us at 400-{!89-0123.
www. Bluedio .com
Bluedio Four – Section Audio with Microphone ManualDownload
Questions about your Manual ? Post in the comments!
References
]]>
Model: Bluedio V2
Victory 2nd Generation
Packing list
Schematic
Power on/off:
Switch the power key on/off to turn the headset on/off.
Bluetooth pairing:
- The headset will automatically enter the pairing mode on boot;
- Start Bluetooth of the mobile phone, search for/add the Bluetooth device, and select “V2” in the searched results (password “0000” is required for some device).
- The headset will automatically connect back to the last successfully connected device on boot.
Answer:
When getting a call, double-tap the right side of the headset to answer ii ; Or say “answer” to do it ; Or use your phone to answer/hang up.
Hang up:
When getting a call, say “ignore” to hang up the phone;
Or use your phone to hang up.
Music pause/play:
- When playing music, say “hello bluedio” to activate the voice control, and then say “pause” to stop playing.
- When the music is stopped, “hello bluedio” to activate the voice control, and then say “play music” to resume playing.
- You can also use your phone to stop/play the music.
Volume up & down:
- When playing music, say “hello bluedio” to activate voice control, and then say “volume up” to increase the volume.
- When playing music, say “hello bluedio” to activate voice control, and then say “volume down” to lower the volume.
- You can also use the phone to control the volume.
Switch up and down:
- Switch to the previous song via your phone.
- When playing music, say “hello bluedio” to activate voice control, and then say “next song” to switch to the next song.
Line-in music playback
Connect the headset to phones, computers and other device to play music via a 3.5mm to Type-C audio cable.
Note: Use the feature only if the headset is turned off. (The audio cable is not supplied with the headset. Please purchase it through the official channels of Bluedio if needed .)
Headset charging
Charge the headset with the standard charging cable after turning it off. The red indicator light is on during charging. The headset is fully charged within about 2.5 hours, after then the blue indicator light is on.
Note: A DC voltage of 5V-5.5V with the current higher than 500mA must be provided if charging via a charger.
Cloud function
This product supports cloud function, and you can go to the last page of the manual to scan the QR code to download the APP.
Triggering cloud (with cloud APP installed on the phone)
Say “hello bluedio” with your phone and APP both connected to the headset via Bluetooth to enter the cloud so as to enable the function and enjoy the intelligent service
Product security
Scratch off the anti-fake coating on the packaging box to obtain the anti-fake number of the product, and input it on the official website www.bluedio.com to verify the authenticity.
Consulting and assistance
Please visit www.bluedlo.com for product related information and technical support.
If necessary, please email to [email protected] or call the aftersales hotline at 400-889-0123.
Technical specifications:
Bluetooth version: 5.0
Scope: up to 10 m (accessible space)
Frequency range: 2.4GHz-2.48GHz
Driving unit: 50mmx2, 30mmx2, 20mrnx8
Transducing mode: moving-coil
Supported protocols: A2DP, AVRCP, HSP, HFP
Impedance: 500 (50mm), 320 (30mm), 320 (20mm)
Frequency response: 10-22000Hz
Sensitivity: 112dB
Bluetooth music time: about 18 hours
Call time: about 26 hours
Standby time: about 200 hours
Charging time: about 2.5 hours
Working environment: -10 • C -50 • C
Input voltage/current: 5V/500mA
Output power: 80mW+80mW
www. Bluedio .com
Bluedio V2 User ManualDownload
Questions about your Manual ? Post in the comments!
References
]]>
Headset Overview
Operation instructions
Power On: When the headset is off, press and hold the MF button until you hear “Power on”.
Power Off: When the headset is on, press and hold the MF button until you hear “Power off”.
Pairing mode: When the headset is off, press and hold the MF button until you hear “Ready to pair”
Bluatooth pairing: Maka the headset enter pairing mod& (sa11 instruction “Pairing mode”), and turn on the Bluetooth feature of your phone, select “T energy”.
Music control:
W’hen playing music, press the MF button once to pause: press once again to resume.
Press the Volume – once to reduce the volume; press and hold to skip to the previous track.
Press the Volume+ once to increase the volume; press and hold to skip lo the next track.
ANC Witch: Push the ANC switch to turn on/off the ANC function: when It’s on, tha LED remains red.
Language selection: Turn on the headset first, then press the MF button and the Volume- button once simultaneously to select Chinesa/E:nglish/Frenchl Spanis.h.
Charge the headset: Tum off the headset before charging and use the included charging cable. While charging, the red light stays on. Allow 1.5 hours for a full charge. Once fully charged, the blue light will stay on.
Specifications :
Bluetooth version: V4.2
Bluetooth operating range: up to 10m (free space)
Transmission frequency range: 2.4GHz-2.48GHz
Supported profiles: A2DP,AVRCP. HSP, HFP
Driver units: 13mm
Nominal impedance: 320
Frequency Responds: 20Hz-20KHz
Sound pressure level(SPL): 116dB
Standby time: up to 250 hours
Bluetooth music/call time: upto 12hours
Pure ANC time about: 9 hours
Fully charged time about: 1.5 hours
Operating environment: -101o50″C
Charging voltage/current: 5V/>500mA
Output power: 10mW+10mW
To verify the headset
Scrape the anti-fake label on the package fer verification code;
Visit our website : www.bluedio.com; Enter the verification code to verify
the headset.
Learn more and get support
Welcome to visit our website: www.bluedio.com;
Or lo email us at [email protected];
Or to call us at 400-889-0123.
Bluedio TN User ManualDownload
Questions about your Manual ? Post in the comments!
References
]]>Model:Bluedio TMS
Headphone Overview
Opearatlon lnatruetlon;
Power on/off:
Toggle the Bluetooth boot key to control the on/ off.
Bluetooth pairing:
- Headphones will automatically enter pairing mode after starting up.
- Start the Bluetooth function of the mobile phone, search / add Bluetooth devices, end select • T Monitor S’ from the searched Bluetooth devices ( some devices need to enter the password “0000” ).
- Headphones that have been successfully paired will automatically enter the re-connection mode after they are turned on, and will automatically connect with the devices that have been successfully paired last time.
Music control:
The user can control music pause/play, volume up/down and next song/last song music switching through the mobile phone.
Tum on ANC Active Noise Reduction:
Toggle the ANC active noise reduction switch, the green indicator lights up end the noise reduction function takes effect.
Smart Play;
When playing music, remove the Headphones end automatically pause the music, then put on the headphones and resume playing the music.
Calling control:
When calling, the finger taps the right shell of the earphone twice to answer the call.
Tap the right side of the headset twice again to hang up the call.Or use your phone to reject calls/ answer calls/ hang up calls.
Charging the headphone:
Switch off the headset before charging, and use standard charging cable to connect the headphone or wall charger, when it is charging, LED light remains red.
Allow 2 hours for full charging, once fully charged, LED blue light stays on.
Line-In music playback:
Connect the headset with your mobiles phone and computers via 3.5mm Type-C audio cable to play music.
Note: Please turn off the headphone before using this function. (audio cable is not provided, if you need it, please order one from Bluedio official purchase channel.)
Line-out music playback:
Connect headphone 1 with phone via Bluetooth, then connect headphone 1 with the headphone 2 with 3.5 mm Type-C audio cable to play music.
Note: headphone 2 should support 3.5 mm audio connection. (audio cable Is not provided, If you need It, please order one from Bluedio official purchase channel.)
Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome to visit our official website: www.bluedio.com;
Or to email us at [email protected];
Or to call us at 400-889-0123.
Cloud function:
The heed phones support Cloud service. Users can download the APP by scanning the QR code on the last page.
Cloud Wake Up ( Cloud App Installed on Mobile Phone)
Both the mobile phone and app are connected to the headset in Bluetooth state. tapping the right shell of the headset twice with your finger can trigger the cloud, enabling the cloud function and enjoying intelligent service.
Technical Specifications:
Bluetooth version: 5.0
Frequency range: 2.4 GHz • 2.48 GHz
Bluetooth working range:
up to 1 Om ( barrier – free space )
Support agreements: A2DP. AVRCP. HSP. HFP
Frequency response range: 20Hz – 20kHz
Drive unit ca,57 mm x 2
Impedance: 160:
Distortion: 0.3 % – 3 % ( TH□ )
Sensitivity: 118 dB
Standby bme: about 1000 hours
Bluetooth Music Time I Talk Time: About 40 Hours
ANC working time: about 65 hours
Bluetooth 1- ANC working time: about 25 hours
Charging time: about 2 hours
Working environment -10 “C to 50 “C
Input voltage/ currenl: 5V/ > 400mA
Output power. 30MW + SOMW
Common issue and solution:
Bluedio TMS User ManualDownload
Questions about your Manual ? Post in the comments!
References
]]>Model: Bluedio T6 (could-based version)
Headphone Overview
Operation instruction:
Power on:
when headphone is off, press and hold MF button until! you hear “Power on”.
Power off :
When the headphone is on, press and hold MF button until! you hear “power off”.
Pairing mode:
When the headphone is off, press and hold the MF button until you hear “Ready to pair”.
Bluetooth Pairing:
Make sure the headphone enter pairing mode( see instruction “Pairing mode”), and turn on Bluetooth function of your phone, select “T6”.
Music control:
When playing music, press the MF button once to Pause/Play. (Users can increase/reduce volume, or skip to previous/next track via cellphone control.)
Answer/Reject a call:
Receiving an incoming call,press the MF button once to Answer/End; Press and hold it for 2 seconds to refuse.
ANC switch:
Push the ANC switch to turn on the ANC function, in about 3 seconds, ANC will be on, and LED light remains green.
Line-in music playback:
Connect the headset with your mobiles phone and computers via 3.5mm Type-C audio cable to play music. Note: Please turn off the headphone before using this function. (audio cable is not provided, if you need it, please order one from Bluedio official purchase channel.)
Line-out music playback:
Connect headphone 1 with phone via Bluetooth, then turn off ANC feature. Connect headphone 1 with the headphone 2with 3.5 mm Type-C audio cable to play music. Note: Please turn off ANC feature before using this function, and headphone 2 should support 3.5 mm audio connection. (audio cable is not provided, if you need it, please order one from Bluedio official purchase channel.)
Charging the headphone:
Switch off the headset before charging, and use standard charging cable to connect the headphone or wall charger, when it is charging, LED light remains red. Allow 1.5-2 hours for full charging, once fully charged, LED blue light stays on.
Cloud function:
The headphones support Cloud service. Users can download the APP by scanning the QR code on the last page.
Wake up the cloud( installed the Cloud APP on your phone)
Connect the headset with your phone, then double-click the MF button to wake up the Cloud. Cloud service is on, you can enjoy smart Cloud service.
Specifications:
Bluetooth version: Bluetooth5.0
Bluetooth range: up l0 10 m (free space)
Transmission frequency: 2.4GHz-2.48GHz
Bluetooth Profiles:A2DP, AVRCP, HSP, HFP
Driver units: 57mm
Noise cancelling sensitivity:- 25dB Impendence: 160
Frequency response: 15 Hz-25KHz
Sound pressure level(SPL):115dB
Standby time: about 1000 hours
Bluetooth music/talk time: about 32 hours
Working time( For Only Running the ANC): about 43 hours
Charging time: 1.5-2 hours for full charge
Operating temperature range: -10.0 to 50.0 only
Charging voltage/current: 5V/500rnA
Power Consumption: 50mW,50mW
Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome to visit our official website: www.bluedio.com;
Or to email us at [email protected];
Or to call us at 400-889-0123.
Common issues and solution:
Bluedio T6(could-based version) User ManualDownload
Questions about your Manual ? Post in the comments!
References
]]>Model: Bluedio T5 (could-based version)
Headphones Overview
Operating Instructions
Power on:
Press and hold the MF button until you hear “Power on”.
Power off:
Press and hold the MF button until you hear “Power off”.
Pairing mode:
When the headphones are all’, press and hold the MF button untll you hear “Ready to pair”.
Bluetooth pairing:
Make the headphones enter pairing mode (see instruction “Pairing mode”), and tum on the Bluetooth feature of your phone, select “T5”.
Music control:
When playing music, press the Pause/Play button once to Pause: press once again to resume.
Volume- button:
Press once to reduce the volume; press and hold to skip to the previous track.
Volume+ button:
Press once to Increase the volume; press and hold to skip to the next track.
Answer/Reject phone calls:
Receiving an incoming call, press the MF button once to Answer; press once again to End; Press and hold for 2 seconds to refuse.
Active noise cancelling:
Push the ANC switch to tum on/off the ANC function; when it’s on, the green light will stay on.
Language selection:
Tum on the headphones first, then press the MF button and the Volume- button once simultaneously to select Chinese/English/French/Spanish.
Line-In music playback:
Use the standard 3.5mm Type-C audio cable to connect the headphones with your mobile phone and computer.
Note: Tum off the headphones when using this feature.
Line-out music playback:
Connect headphones 1 with your mobile phone via Bluetooth first, then tum off the ANC function end use the 3.5mm Type-C audio cable to connect headphones 1 with headphones 2.
Note: Tum off the ANC function before using this feature. The headphones 2 must support 3.5mm audio jack.
Charge the headphones:
Turn off the headphones before charging.Use the included Type-C charging cable to connect the headphones with a computer or wall charger. While charging, the red light stays on. Allow 1.5-2 hours for a full charge. Once fully charged, the blue light will stay on.
Cloud function:
The headphones support Cloud service. Users can download the APP by scanning the QR code on the last page.
Wake up the cloud( Installed the Cloud APP on your phone)
Connect the headset with your phone, then double-click the MF button to wake up the Cloud. Cloud service is on, you can enjoy smart Cloud service.
Specifications
Bluetooth version: 5.0
Bluetooth operating range: up to 33 feet (free space)
Bluetooth transmission frequency: 2.4 GHz-2.48GHz
Bluetooth profiles: A2DP~ AVRCP, HSP~ HFP
Drivers: 57mm
Noise-reduction: -25dB
Impedance: 160.
Frequency response: 15Hz-25KHz
Sound Pressure Level (SPL): 115dB
Standby time about: 1000 hours
Bluetooth music/talk time about: 32 hours
Pure ANC time about: 43 hours
Charging time: 1.5-2 hours for full charge
Operating temperature range: -1 O”C to 50″C only
Charging voltage/current: 5V/>500mA
Output power: 50mW+50mW
Purchase Verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the coda on our official website: www.bluedio.com for purchase verification.
Learn more and get support
Welcome to visit our official website: www.bluedio.com; Orto email us at
[email protected]; Or to call us at 400-889-0123.
Bluedio T5(could-based versionDownload
Questions about your Manual ? Post in the comments!