Boat – ItsManual https://itsmanual.com Owner's manuals for all sorts of products Fri, 14 Feb 2025 19:24:22 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://itsmanual.com/wp-content/uploads/2021/09/favicon.ico Boat – ItsManual https://itsmanual.com 32 32 boAt Stone 170 Manual https://itsmanual.com/boat/stone-170/ Mon, 08 May 2023 12:04:50 +0000 https://itsmanual.com/?p=102432 Read More...

]]>
 

User Manual

Specifications

Troubleshooting FAQs

Charging

What to do if the speaker is not charging / battery life is low?

  1. Check if restarting the device resolves the issue.
  2. Check if the charging cable connected to the speaker is not broken, use other charging cables to charge the speaker and also ensure that the charger being used is not of 9V or 12V as that will damage the speaker. The Red LED light located on the speaker would indicate if the charging is happening or not.
  3. Check if the Type-C port on the case is damaged or not
  4. Check if the charger being used is functional.
  5. Check if there is any dust or obstruction clogging the charging port of the speaker. (If so, try cleaning it with a piece of cloth and try plugging it again).
  6. Try factory-resetting the device.
Poor Sound Quality

What to do if the sound is distorted/low volume/low bass/low quality?

  1. Check if connected device does not have any equalizer settings applied.
  2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
  3. Check if the distortion or quality lowers at all volumes or only at high volumes.
  4. Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.
  5. Check if the problem occurs at all levels of charging or only at low charging levels.
  6. Check if the speaker does not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.

What to do if the speaker is occasionally keeps disconnecting the Speaker?

  1. Check if restarting the speaker resolves the issue.
  2. Check if the same problem happens for different devices and media players.
  3. Check if there are any obstructions between the speaker and the device, move the device at a closer range to the speaker and see if it still affects it.
  4. Try factory-resetting the device.

What to do if there is no sound from the speaker?

  1. Check if restarting the device resolves the issue.
  2. Fully let the speaker discharge and then charge it fully again before use.
  3. Check to see if the device has been properly connected, i.e., the jack is properly inserted into the device for AUX, SD card is properly functioning for SD mode, properly paired for Bluetooth mode with light solid blue.
  4. Try connecting through a different connection mode or media device.
  5. Check if the device was not subject to any mishandling, or exposed to direct sunlight or hazards like fire.
​Connectivity

How to pair the speaker via Bluetooth mode?

  1. The speaker will enter auto pairing mode when switched on, the LED light will flash blue to indicate this.
  2. Turn on the Bluetooth function on your smartphone or any other compatible device.
    Search for “boAt Stone 170” from the available list of Bluetooth devices and connect the two. Enter the passkey “0000” if one is asked for during connection.
  3. After successfully pairing, the speaker is now ready to play music from your smartphone.
  4. The successfully paired device can be automatically connected when switched on the next time.

Note: Within 10s after entering Bluetooth mode, the Bluetooth will automatically seek out previously connected devices to pair with. The speaker will need to be connected manually through the above process.

How to connect via Aux Mode?

  1. You can switch to AUX mode by using the AUX cable to connect the phone and the speaker, and then short pressing the Power button.
  2. In the AUX mode, you can control the audio playback via the media device/ phone.

What to do if device not connecting via Bluetooth?

  1. Check to see if the device is in pairing mode, after powering it on the LED indicator will blink white.
  2. Check if the speaker is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.
  3. Check if the device being connected to supports Bluetooth connections or not
  4. Check if it is a passcode issue and if so enter 0000 / 1234
  5. Check if the speaker being connected to does have any software issues or not – Check to forget the device on Bluetooth, update the mobile software, if it still does not work try factory resetting the device.

What to do if the Aux mode is not working?

  1. Check if restarting the device resolves the issue and if the speaker is in Aux mode by short pressing the ‘Mode’ button.
  2. Check if you have connected the aux cable properly and in the correct orientation on both ends.
  3. Check if the problem persists even after using a different cable or different device to connect to the speaker.

​What to do if device not working in TWS mode?

  1. Ensure that both the devices are Stone 170.
  2. Check if the power is on and both the devices are in Bluetooth mode.
  3. Check if both the devices are charged (White LED lights indicate how much battery has been consumed).
  4. If the issue persists, try switching both the devices off and then on and try pairing again.
  5. Try factory-resetting the devices.

How to disconnect the Bluetooth speaker?
Press and hold the play and pause button to disconnect the Bluetooth.

Dysfunctional Voice Assistant

What to do if the voice assistant does not wake up?
Ensure that you short press the “ ” button to turn on voice assistant.

Microphone Functionality

What to do if microphone of the device is not working?

  1. Check to see the microphone is not being blocked by any dust or obstruction.
  2. Check to see if the microphone is being held at the adequate distance for it to be able to pick up the voice.
  3. Check if the microphone was not exposed to any hazards like direct sunlight or fire.
  4. Check if the microphone was not exposed to water above the resistance or dipped in any other liquid or not.
  5. The microphone is not functional using the aux mode, check if the device is not in aux mode.
  6. Try factory-resetting the device.
Other Functional Issues

What to do if device does not turn on / not working?

  1. Check to see if the device has been properly charged first or not. Red LED light on the speaker will indicate they are still being charged at different levels.
  2. Check if the voltage of the charger is correct for the speaker or not.
  3. Check by switching the speaker on manually, press and hold the power on button for at least 3 seconds.
  4. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.

What to do if the in-built controls of the speaker is not working?

  1. Check if the controls do not work while connected to another device
  2. Check if the device is in aux mode because the buttons will not work in aux mode
  3. Check if the media player being used supports such controls and if the controls do not function on call or other media players
  4. Check if the controls have been physically damaged or exposed to any hazards

What to do if there are any other functional issues with Stone speaker?

  1. Check if restarting the device resolves the issue.
  2. Fully let the speaker discharge and then charge it fully again before use.
  3. Try connecting through a different connection mode or media device.

​General FAQs

Technology

What is TWS?

  1. Stone 170 can connect with two Stone 170 and virtually forge them into one speaker for a greater impact. For TWS connection:
  2. Turn the speakers on that you require to be forged into one, both under Bluetooth mode. Only need to set one of the two units.
  3. Long press TWS “ “ button till you hear a sound prompt, then start to pair.
  4. A tone will be audible again with the white light turning steady, it may take a few seconds before the two speakers connect.
  5. Activate the phone’s Bluetooth function and search for “Stone 170” to establish pairing

Note:

  1. Once the two units execute TWS function, they will be automatically paired again if next time they are turned on within effective range.
  2. Disconnecting TWS – Short press TWS “ ” button for stopping the TWS function & Long press TWS “ ” button for disconnecting both TWS and Bluetooth connectivity

Does this speaker support wireless playback?
Yes, the speakerphone will work and, in this case, the primary speaker will be the speakerphone.

Does the speaker have Aux port/ USB port/ SD card slot?
The speaker has an AUX, USB port which supports 3.5mm. Other than that, it supports Bluetooth connectivity.

Does the speaker support call feature/ speaker phone?
Yes, one can accept calls on the speakers.

Does the speakerphone work when using True Wireless Mode?
Yes, the speakerphone will work and, in this case, the primary speaker will be the speakerphone.

Can the speaker be used for gaming?
Yes, it can be. However, it is advised to only do so using an aux connection as Bluetooth mode might have latency issues.​

Device Controls

How to Power ON/OFF?
​Power ON: Long press the power button for 3 seconds and Blue LED flashes.
Power OFF: Long press the power button for 3 seconds and Blue LED turns off.

How to adjust Volume?
Volume Up: Short press the “ + ” button in steps for increasing the volume.
Volume Down: Short press the “ – ” button in steps for decreasing the volume

​How to change music tracks?
Previous Track: Long press the “ – ” button for returning to the previous track.
Next Track: Long press the “ + ” button for skipping to the next track.

How to play and pause the music?
Short press the Play/Pause button

How to answer/end calls?
Short press the play/pause button to answer/end calls.

How to reject calls?
Long press the play/pause button for rejecting incoming calls.

How to activate voice assistant?
Short press the “Voice Assistant” button to activate the voice assistant.

How to switch calls between speaker and the phone?
Long press the play/pause button for 2 seconds.

How to switch modes?
Tap the pairing button to switch the current mode that the speaker is in.

What to do if the voice assistant doesn’t get activated even though my phone supports it?
To activate voice assistant, ensure that you have it enabled on your media device (Google on android & Siri on apple devices).

Can I connect more than 2 speakers in True Wireless Mode?
Only 2 speakers of the same model can be connected in True Wireless Mode.

Can I activate assistance by voice?
Ensure that you short press the “ ” button to turn on voice assistant.

Device Charging

How can I charge the speakers?
To charge the earphone, plug one end of the Type-C charging cable with the speaker and connect the other end to a computer or wall adapter.

What are the Battery indications?
Charging: During charging, you could check charging status from the 4 LED white colour charging indicators:
0%-25%: 1st LED keeps solid, second light flickers, and 3rd and 4th light stay off.
26%-50%: 1st and the 2nd LED keep solid; 3rd LED flickers and 4th stays off.
51%-75%: 1st, 2nd and 3rd LED keep solid, 4th light flickers
100%: At charging 100% all 4 LEDs stay solid
Fully Charged: Once the earphones are fully charged, it is indicated by all the 4 LEDs stay solid.

How can I prolong my speaker’s battery life and usage?
To ensure maximum efficiency and battery life ensure that the speaker is not used at 100% volume at all times and that the battery is charged when it falls to 20% and below.

Does the speaker need to be charged and turned ON manually after connecting it with an AUX cable?
Yes, the speaker is not powered through the aux cable so please make sure that it is charged and powered on before using it through aux connection

Can the speaker be charged with Micro-USB cable?
No, you cannot charge it with Micro-USB cable. It can only be charged using the Type-C cable.

Water/Dust Protection

​Is the speaker waterproof?
Not completely, it has IPX6 certification which makes the speaker splash proof.

Can the speaker be submerged in water or used under water?
The speaker has IPX6 water protection which makes the speaker splash proof.


]]>
Boat Rockerz 295 / 255 Earbuds Manual https://itsmanual.com/boat/rockerz-295-255-earbuds/ Fri, 14 Feb 2025 19:24:22 +0000 https://itsmanual.com/?p=220104 Read More...

]]>
Boat Rockerz 295

Boat Rockerz 295 / 255 Earbuds Manual

BOAT SPORTS
THANK YOU
Thank you for purchasing the boAt Rockerz 295 Sports wireless earphones and welcome to the boAt Family!

NOTE: Before using this product, please read and follow the instructions carefully in the user’s guide. It will help you set up and operate your wireless earphones properly.. Please keep this user guide for future reference.

Boat

CAUTION
• Do not use abrasive cleaner to clean your boAt Rockez 295 because this could cause scratches and damage.
• Do not bring your boAt Rockers 295 in contact with any shags objects because this could cause scratches and damage.
• Do not inset anything into your boAt Rockerz 295 unless otherwise specified in the user Instructions. This may damage die internal components.
• Do not attempt to repair, modify, or disassemble your boAt Rockerz 295 yourself, it does not contain any user-serviceable compounds.
• Do not attempt to replace your boAt Rockers 295 battery, it Is built-In and is not changeable.
• Observe all signs and displays that require an electrical device or RF radio product to be switched in designated area.
• Dispose off the boAt Rockery 295 and the bolt Rocken 295’s battery in accordance with local regulations. Do not dispose of the battery with regular household waste.

Fire and electric shock hazard
• Do not expose your boAt Rockers 295 to extremely high or low temperatures.
• Do not leave your boAt Rockers 295 in direct sunlight for extended periods of time.
• Do not leave your boAt !lodes 295 near open flames such as cooking burners, candles, orfireplaces.
• Do not put water or any other liquid on boAt Rockers 295, the earphone is water resistant but not water proof.
• Do not block any ventilation openings.

Battery/charger hazard
• Do not dispose of your boAt Rockers 295 in afire. The battery could explode causing injury or death.
• Only charge the battery in accordance with the user instructions supplied with the boAt Rockers 295.
• Do not attempt to disassemble the boAt Rockers 295 charger of force open the built-in battery because this may result in electric shock.
• Do not clean the boAt Rockers 295 when it h being charged. Always unplug the charger first before cleaning the boAt Rockers 295.

SAFETY INFORMATION
WARNING
Please read these warnings and safety cautions carefully to insure your personal safety and prevent property damage.

IMPORTANT SAFETY INFORMATION
Listen Responsibly
To avoid hearing damage, make sure that the volume on your music player is tumed down before connecting your earphones. After placing earphones in/on your ears, gradually tum up the volume until you reach a comfortable listening level. Noise levels are measured in dedbels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it. The softer it is, the more time you can listen to it.

Use Responsibly
Do not use boAt Rocken 295 when its unsafe to do so- while operating a vehicle, crossing streets, or during any activity or in an environment where your full attention to your surroundings is required. Its dangerous to drive while wearing earphones. In many places it is illegal because it demeases your chance of hearing life-saving sounds outside of your vehicle such as another cars hom and emergency vehkle sirens. Please avoid wearing your earphones while driving.

Pairing 2 devices simultaneously
Multi point technology enables you to pair headset to two phones at the same time and take calls from either device. Pair the boat Rockerz 295 to first phone per usual pairing procedure,then switch off headset. Then switch on headset again and enter pairing mode, enable Bluetooth function in second phone, find headset’s Pairing Name “boat Rockers 295” and pair to second phone per usual procedure. Switch off headset one more time. Then simply switch on headset, without entering pairing mode (a short press until blue light comes on).The headset should automatically re-connect to the last connected phone (which is the second phone). Then find headset “boat Rakers 295′ in fist phone’s Bluetooth setting, select this to panto SW phone. Both phones should now be paired to the earphone.

Pairing 2 devices

 

SPECIFICATION
• Drivers: 2x8mm
• BT Version: V 4.1
• Chipset: C5118640
• Bluetooth Profile: HSP, HFP, AVCRP and A2DP
• Bluetooth Range: <10m, Class 2
• Battery: 2x40mAh
• Playback Time: Upto 8 hours
• Charging Time: 1.5 hours
• Standby Time: 180 hours
• Impedance: – 161)
• Sensitivity (dB): 105dB±3dB
• Frequency Response: 20Hz to 20,000Hz
• Water proof profile: – IPX4

Product Overview

Product Overview

1. Volume + / Track forward
2. LED indicator
3. Charging jack
4. Multi function button
5. Mic
6. Volume -/Track back

BASIC INSTRUCTIONS
Charging the earphones
Use the Micro USD cable and connect earphones to your computer or adapter device made for USD charging. A red LED indicator will tum on when the earphones are charging. The red LED light will start flashing blue once they are fully charged. Low battery is indicated when the LED starts blinking red.

 

Charging the earphonesPairing
1. Make sure your phone, computer or music device is turned on and within 1 meter of the earphone.
2. Hold down the multifunction button (play,pause,power) on the earphone until Blue and Red LED starts flashing alternately (About 5 seconds) and then release the button.
3. Activate the Bluetooth feature on your phone or device and set it to search for Bluetooth device (discoverable). 4. Select “boAt Rockerz 295” from the list of found devices.
5. Once successfully paired, the LED light will flash Blue once every few seconds.
6. If necessary,inter pass code “0000” to pair and connect the earphones to your device.

Power Off
1. To Power off, press and hold the multi functional button and LED will flash red and tum off.
2. If Bluetooth earphone is not connected to any device within 5 minutes, it will turn off automatically.

Playback/Controls
1. Press Multi function button (play,pause,power) once to play or pause audio.
2. Long Press (Volume +) button on the side of the earphone to skip forward to next track. Short Press the (Volume +) button to increase volume.
3. Long Press (Volume -) button on the side of the earphone to go back to previous track. Short Press the (Volume -) button to decrease volume.

NOTE: The controls will not function when charging.

Calls
1. To answer an incoming call, press the multi function button, with (play,pause,power) symbol on it.
2. To end a call, press the Multi function button during call, with (Play,Pause,power) symbol on it
3. To reject a call, press the Multi function button, with (play,pause,power) symbol on it for 2 seconds.
4. To dial to the last call number, double press the multi function button with (play,pause,power) symbol on it
5. To switch a call between your phone and earphone, hold down the Volume+ button for about 2 seconds. This can be done again to switch back to the previous setting.
6. To answer a new call and keep the current call on hold, press the Multi function button (play,pause,power) for about 2 seconds.

FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and

(2) this device most accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2AFL7-ROCKERZ295

Questions about your Boat Rockerz 295 / 255 Earbuds Manual? Post in the comments!
Boat Rockerz 295 / 255 Earbuds Manual [PDF]

 

References

]]>
Boat Rockerz 390 Over-The-Ear Headphones Manual https://itsmanual.com/boat/rockerz-390-over-the-ear-headphones/ Fri, 14 Feb 2025 19:02:43 +0000 https://itsmanual.com/?p=220094 Read More...

]]>

Boat Rockerz 390 Over-The-Ear Headphones Manual

Headphone Specifications:
Driver Unit Size: 40mm
Frequency Response: 20Hz to 20KHz
Impudence: 640 Sensitivity: 954+10%dB
Mic Sensitivity: 58dBi3dB

Battery Information:
Built-in Battery: Lithium
Input: DC 5V/300mA
Battery Capacity : 300mAH
Music playing time: Up to 6 hours.
Charging time: 1-2 Hours

‘Approximate playback Mos. Battery life depends on individual use and may be slightly more or less than the time specified.

Bluetooth Information:
Bluetooth Specification: V3.0 Operating
Distance: 10 Meters(Class 11)
System Requirements: Bluetooth-capable device

Additional Connection Sources:
Power Source: Built-in rechargeable battery or via USB cable

Technical Support:
Please do not attempt to fix the product by yourself. If you are experiencing any problems with the product, please do not return it to the store you bought it from. You can contact our technical support representatives and they will assist you with any questions you might have.

For assistance operating your product, please consult the User’s Manual first, then feel free to contact Imagine Marketing India for technical support:

Connect Us on:

Package Includes:
1 Bluetooth Headphone
1 Micro USB Cable

Features:
• Automatically reconnects with the last connected Bluetooth device.
• Rechargeable battery provides up to 6 hours of continuous playback.
• Built-in on-ear controls let you control your music,adjust the volume,and answer calls

Powering On/Off
Hold button to power on device and stop playback. Please ensure the headset is fully charged before use.

Bluetooth Pairing/Connection
Switch on the product. Bluetooth mode will be activated automatically. Enable BE function on your media device. Search the Bluetooth device named Rockers 390. Click or tap to connect (pair). After successful connection (pairing) you will hear a chime. Now you can play music, or use Bluetooth phone functions.

Music Playback Functions
• Connect your device to the BoAt Rockers 390 via Bluetooth (refer to the “Pair Connect. section)
• Open your favorite music spy and press play.
• Control the music & volume from the right side button on the BoAt Rockerz 390.
• Press the Power button once to play/pause music IS answer calls, press ft twice to redial the last number called on your phone, and press 8 hold it to reject an Incoming call.

Included Cable:
Micro USB

• To charge your device. Plug the small side of the micro USB cable into the USB charging port on your headset and plug the large end into the USB port on a computer, or AC adapter (Not Included).
• Solid red LED light will appear on the power button to indicate when the headphone is charging, even while headphone is turned off.
• When charging is complete, the LED light will turn blue.
• Charging time is approximately 1-2 hours. NOTE: If the boAt Rocker. 390 is not used within 5 minutes,the headphones will automatically turn off to save battery.

Press & Hold (3 Sec):Power On/Off
Press & Hold (3 Sec):Enter Pairing Mode
Click Once:Play/Pause,Answer/End Calls
Double Click: Re-dial Last Dialed Phone Number
Press & Hold (1-2 Sec):Reject Incoming Call

Changing Song Next Track : press A long goes to next track
Increasing Volume High : press A short can Increase volume.
Changing Sang Previous Track : press V long goes to previous track
Decreasing Volume : press V short can decrease volume

WARNING: To reduce the risk of ‘fire or electric shock, do not expose this apparatus to minor moisture.

CAUTION : Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s warranty.

WARNING: Do not place the unit on top of any rough or hard surfaces to avoid damaging the product. Use a protective barrier between the unit and surface to protect the product.

WARNING: Use of this unit near fluorescent lighting may cause interference. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

Important Safety Instructions:

1. Read the instructions carefully.
2. Do not lose the instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
8. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Follow applicable laws and regulations for transport, shipping, and disposal of batteries. For details on recycling lithium, lithium phosphate, and lithium ion batteries, pleases contacts a government recycling agency, or your waste disposal service.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use the attachment/accessories specified by the manufacturer.
11. Unplug this apparatus during lighting, storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power —supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13. Headphones am capable of produdng sound levels which can be harmful to your hearing. Do not listen at high volume for prolonged periods of time. Headphones may block out surrounding sounds. Never wear headphones while operating a vehicle. Use with caution. Users assume all risks associated with the use of this product

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protector against harmful interference in a residential installation. This equipment generates uses and can radiate frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired operation.

Questions about your Boat Rockerz 390 Over-The-Ear Headphones Manual? Post in the comments!
Boat Rockerz 390 Over-The-Ear Headphones Manual [PDF]

References

]]>
boat Airdopes 281 Twin Wireless Ear-buds Manual https://itsmanual.com/boat/airdopes-281-ear-buds/ Wed, 19 Jul 2023 05:38:30 +0000 https://itsmanual.com/?p=166687 Read More...

]]>
boat Airdopes 281 Twin Wireless Ear-buds User Guide

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 281. Please consider this manual as your guiding map towards the shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual; also, you may refer to the same at times when you face any sort of difficulty in future.

In the box

  • 1x Pair og Ear-buds
  • 1x Charging Case
  • 2x Pair of Ear Caps
  • 1x Charging Cable
  • 1x User Manual

Power On (First Time User)

Step 1: To automatically switch the earbuds on (Smart Power On) simply take them out from the charging case


OR
To manually switch the earbuds on (Manual Power On), long touch the Capacitive Touch Control (*CTC) for 3 seconds on both Left and Right earbuds for switching them on until the LED light begins to flash in blue


Step 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode, indicated by alternating blue and red LED flashes.

Connection Mode

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan
Step 4: Search for ‘Airdopes 281’ and pair accordingly. Enter ‘0000’as the passkey if asked.
Congratulations! Your earbuds are now connected successfully via Bluetooth

Note:

  •  Pairing mode lasts for 180 seconds. if the pairing time is missed then you will need to reconnect the earbuds and follow the above mentioned procedure
  • Airdopes 281 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices.

LED Indicators / Functionalities

  1. 2 Seconds
    Long Press CTC on either earbud for 2 Seconds to activate Voice Assistant. / Reject incoming Calls.
  2. 3 Seconds
    Manual Power ON: Blue/Red Lights will Blink.
  3. 5 Seconds
    Scan Mode: Manual Power OFF Red Lights will Blink.
  4. 5 Seconds
    Factory Reset: Put the earbuds inside (While Earbuds case and Long Press CTC for 5 second Inside Case) Blue/Red Lights will Blink on both Earbuds.

NOTE: Factory Reset will remove all device profiles saved on the Airdopes 281

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use either of the two options; Smart Power On or Manual Power On for switching on the desired earbud
Step 2: The selected earbud will automatically enter the connection mode indicated by alternating blue and red
LED flashes
Step 3: Turn on Bluetooth on your phone/media device and search for’Airdopes 281’to connect.

Notes:

  • To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
  • You cannot skip tracks or return to the previous tracks in Mono mode.

Charging The Earbuds

Step 1: Please insert the earbuds back inside the charging case in correct orientation.
Step 2: A red LED will indicate that the earbuds are being charged. Once fully charged the LED turns off. Step 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.

Charging The Case

Step 1:To charge the case, plug one end of the Type-C cable into the case and connect the other end to a computer or a wall adapter.
Step 2:The LED lights located on the charging case indicate the battery status of the case. The indicator in the case blinks red in colour during charge. When the case has been charged fully the red light gets steady.

Basic Functions

  • Voice Assistant: Long touch the CTC on either earbud for 2 seconds to activate the voice assistant
  • Answer/Hang Up Call: Single tap the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call
  • Reject Call: Long touch the CTC on either earbud for 2 seconds to reject incoming calls
  • Play/Pause Music: Single tap the left/right earbuds CTC once to play or pause a song
  • Next Track: When playing music, double tap the right earbuds CTC to skip to the next song
  • Previous Track: When playing music, double tap the left earbuds CTC to return to the previous song

Note: Volume cannot be controlled via earbuds and can only be adjusted via phone/media device

Voice Assistant

Step 1: Long Press the CTC on either earbud for 2 seconds to activate the voice assistant
Step 2:
The respective voice assistant screen pops up and you may place your commands at ease

Tips: You may try out the following commands,

“What id the weather?”
“Play a song”
“Where are Pyramids located?

Smart Power Off

Step 1: After usage, remove both the earbuds from your ears Step 2: Place the earbuds back into the charging case in correct orientation
Step 3:The earbuds will automatically switch off (and enter into charging mode)

Manual Power Off
Step 1: Long touch the CTC on either earbud for 5 seconds until the red indicator light blinks before earbuds getting turned off, in order to manually switch off the earbuds. Please note that this powers off both the earbuds
Step 2: Please keep the earbuds back into the charging case to charge the earbuds

Factory Reset

Perform the Factory Reset in case you face any difficulty while operating your Airdopes 281

  1. Put the earbuds back inside the charging case in correct orientation; the red LED gets steady indicating they are being charged
  2. Try to push the earbuds lightly inside the charging case and hold them in correct orientation to keep them steady and in place; then keeping them in place, triple tap the CTC on both the earbuds. LED flashes red twice and then red LED is steady.
  3. Take out both the earbuds from the case, LEDs start flashing in blue until both the earbuds’ LED flash blue & red.Then double tap the CTC on both earbuds, blue LED flashes twice then turns into steady blue. This indicates that the left and right earbuds are ready to pair with each other
  4. Once the right earbud’s LED flashes in blue & red, it indicates that both the earbuds have successfully paired with each other 5. Congratulations! Your Airdopes 281 has successfully been reset.

Common Problem with Solution

  •  If only one earbud is functioning: Simply insert the earbuds back into the case and take them out or perform the Factory Reset
  •  If earbuds are not in scan mode: Simply insert the earbuds back into the case and take them out or perform the Factory Reset

Troubleshooting

Potential Problem Solution
If one earbud is not working Perform the Factory Reset
If earbuds are not in connection/scan mode Perform the Factory Reset
If earbuds disconnect during phone call Charge the earbuds or perform the Factory Reset
If there are other exceptions in usage Place the earbuds back into the charging case and try using the gain or perform the Factory Reset

Specifications

Bluetooth Version V5.0
Water Resistance IPX5
Music Playtime Up to 5 Hours
Standby Time 150 Hours
Transmission Range 10m
Driver Size 6mm
Bluetooth Profile HFP, HSP, SPP, AVRCP, A2D
Frequency 20Hz-20kHz
Batter Earbuds 40mAh ‘2
Battery Charging Case 420mAh
Charging Time 1 Hour
Earbuds’Weight 442g
Charging Case Weight 41g

Warning

  • Please follow the instructions to operate
  • Please charge the ear-buds according to the charging norms as mentioed on the packing & manual.
  • Please don’t use the ear-buds in extreme temperature
  • Please don’t water   use the product near water
  • Please keep the product away form heat source as the heat may damage it
  • Don’t jam the ports such as charger port, LED port, etc. maximum volume in order to protect hearing and extend the ear-buds serviceslife

Advisable

The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switch on at first .This can be done by using the volume control on the phone/media device.

Charging norms & Precautionary Guidelines

  1. Charging /Brick/Adapter: 5V/2A
  2. Cable/Wire: Standard Cable (35 Stands @0.10 mm diameter/strand)

Any other accessory can be paired up with the product as long as the specifications are as per above norms.

]]>
boAt Airdopes 701 ANC True Wireless Earbuds Manual https://itsmanual.com/boat/airdopes-701-earbuds/ Tue, 18 Jul 2023 04:58:47 +0000 https://itsmanual.com/?p=164699 Read More...

]]>

User Manual

Airdopes 701 ANC comes with a BEAST™ Mode designed to significantly reduce latency for the gamer in you. Stay plugged in all day long, with playback of 28H with the charging case.

The 9mm drivers blast the unbeatable BOAT Signature Sound with a thumping bass that makes you immerse in music like never before.

Flip through your entire Netflix playlist with just 10 minutes of charge, which offers 60 minutes of playback with the ASAP Charge technology.

 

Specifications

Buttons and Indicators

Troubleshooting FAQs

Charging

How can I charge the case?
To charge the case, plug one end of the cable into the case and connect the other end to a computer or a wall adapter or a power bank.

How to charge the earbuds?

  1. To charge the earbuds, put the earbuds into the charging case in their correct orientation.
  2. A solid Green LED will indicate that the earbuds are being charged. Once fully charged, the LED indicator goes off.
  3. Once the earbuds are fully charged, the charging case automatically switches off to save power.​

Note: Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed. While charging and use a 5V/2A adaptor.

What to do if the charging case is not charging?

  1. Check if the stickers on the charging points of the ear pods are removed or not. If not then it is to be removed and the ear pods will start charging once put inside the charging case.
  2. Check if the charging cable connected to the case is not broken, use other charging cable and also ensure that the charger being used is not of 9V or 12V as that will damage the case. The LED lights located on the charging case indicate the battery status of the case.

What to do if the earbuds are not charging?

  1. Ensure that the earphone case is charged for charging the earbuds.
  2. Check to see if the earbuds have been put inside the case in the right orientation, and a white light on the earbuds will indicate they are still being charged. This light will go off once the earbud’s have been completely charged.
  3. lean the magnetic connector pins on the case and connector place on the earbuds with a clean cloth with mild alcohol and check the charging of the earbuds again
  4. After cleaning, put the left earbud into the case in desired orientation and close the lid.
  5. After cleaning, put the right earbud into the case in desired orientation and close the lid.
  6. Once both the earbuds are charged, the LED on the case will go off.

What to do if the earbuds not charging while inside the charging case even when the case is charged?

  1. Check if the charging pins of the case are clear and there is no obstruction.
  2. heck if the charging pin of the earbuds are clear and there is no obstruction.
  3. Check if the orientation of the earbuds inside the case is correct and they have been properly inserted inside the case.
  4. Check if the pogo pins are clean. You may do so by gently cleaning it cotton swabs with alcohol.
Device Controls

How to Power ON/OFF Airdopes 701 ANC?
1. Power ON:
Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enter into the connection mode. OR Long touch the CTC on both earbuds for 3 seconds to manually power on the earbuds.
Step 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode indicated by 3 flashes of Green LED.

2. Power OFF:
Smart Power Off:
Step1: After usage, remove both the earbuds from your ears.
Step2: Place the earbuds back into the charging case in correct orientation.
Step3: The earbuds will automatically switch off (and enter into charging mode).

Manual Power Off:


Step1: Long touch the CTC on both earbud for 8 seconds to manually power off the earbuds.
Step2: Once the earbuds get turned off, place them back inside the case and close the lid.

How to factory reset my earbud?
Step-1: Clear the pairing records from your phone or media device and forget the device. Place both the earbuds back into the charging case in correct orientation to switch them off.
Step-2: Take out the earbuds from the case and Long press the CTC on both earbuds for 8 seconds till the led turns red. Then blinks green 3 times and then red again.
Step-3: Keep the earbuds back in the case and shut the lid again.
Step-4: Open the case lid again and they automatically restart and you can pair using IWP technology.
Step-5: Airdopes 701 ANC has been Reset and ready to pair.

​Below are the cases where factory reset may be helpful

  • One earbud is not working
  • Earbuds are not getting connected or scanned
  • Earbuds gets disconnected during a phone call
  • If there are exceptions in usage

How can I activate Voice Assistant?
Long tap and hold the CTC on either earbud for 2 seconds to activate the voice assistant

How to Answer/Hang Up Call?
Single press the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call.

How do I Reject a call?
Long press the CTC for 2 seconds to reject incoming calls.

How to Play/Pause Music?
While playing music, double tap on the left earbud’s CTC would result in returning to the previous track.
While playing music, double tap on the right earbud’s CTC would result in jumping to the next track.

How to change music tracks?

  1. When playing music, double press the right earbud’s MFB in order to skip to the next song on the playlist.
  2. When playing music, double press the left earbud’s MFB in order to return to the previous song on the playlist.

Note: Volume cannot be controlled via earbuds and can only be adjusted via phone/media device.

How can I use a single earbud at a time?
Step 1: Please note that both the earbuds can be used in mono mode. Use either of the two options; Smart Power On or Manual Power On for switching on the desired earbud.
Step 2: The selected earbud will automatically enter the connection mode indicated by alternating Green and Red LED flashes.
Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 701 ANC’ to connect.

​Notes: To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.You cannot skip tracks or return to the previous tracks in Mono mode.

Poor Sound Quality

​What to do if the sound is distorted/low volume/low bass/low quality?

  1. Check if connected device does not have any equalizer settings applied.
  2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
  3. Check if the distortion or quality lowers at all volumes or only at high volumes.
  4. Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.
  5. Check if the problem occurs at all levels of charging or only at low charging levels.
  6. Check if the earbuds do not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.
  7. Check if the earbuds are clogged with ear wax, simply clear the earbuds to restore the original sound.

What to do if the sound output is muffled?

  1. Check if connected device does not have any equalizer settings applied.
  2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
  3. Check if the distortion or quality lowers at all volumes or only at high volumes.
  4. Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.
  5. Check if the problem occurs at all levels of charging or only at low charging levels.
  6. Check if the earbuds do not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.
  7. Check if the earbuds are clogged with ear wax, simply clear the earbuds to restore the original sound.
Bluetooth Connectivity

What to do if the device is not connecting via Bluetooth?

  1. Check if the device is in pairing mode and indicating that by alternating green and red LED flashes on either earbud.
  2. Check if the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.
  3. Check if the device being connected to supports Bluetooth connections or not.
  4. Check if it is a passcode issue and if so enter 0000 / 1234.
  5. Check if the device being connected to does have any software issues or not – Check to forget the device on Bluetooth, update the mobile software, if it still does not work try factory resetting the device.

What to do if the device is not entering stereo mode / is stuck in mono?

  1. Check when both the earbuds are taken out of the charging case, the earbuds will enter into the Connection Mode, indicated by light blue LED flashes.
  2. If one of them fails to smart power on, to manually switch the earbuds on (Manual Power On), long touch the CTC for 3 seconds on both Left and Right earbuds for switching them on until the LED light begins to flash in red and white colours.
  3. Place the earbuds in the charging case and then try using them again. Check if it connects automatically.
  4. Check and see if hard resetting the device work as desired or not.
  5. Check if the earbuds are charging or not. If not then clean the earbuds and the charging case specially the charging pins and connectors with mild alcohol swab and see if it goes in charging mode or not.

What to do if the device occasionally disconnects/ the right earbud keeps disconnecting?

  1. Check if restarting the device resolves the issue.
  2. Check if the same problem happens for different devices and media players.
  3. Check if there are any obstructions between the earbuds and the device and clear them, move the device at a closer range to the earbuds and see if it still affects it.
  4. Try factory-resetting the device.

Why is one side of my earbud not working?
​Simply the earbuds back in to the case and take them out or perform the factory reset.​

Dysfunctional Voice Assistant

What to do if the voice assistant does not wake up?

  1. Check if the pairing device has the feature enabled. Google Assistant or Siri should be enabled to use this feature from your device.
  2. Please follow the steps carefully, long touch the CTC for 2 seconds and release, this should allow Google
  3. Assistant or Siri to pop up on the media screen of the device. Though under some circumstance, this feature may or may not work on some devices which may be restricted by default.
Product Functionality

What to do if the device does not turn ON?

  1. Check to see if the device has been properly charged first or not. A blue light on the earbuds will indicate they are still being charged. This light will go off once the earbud’s have been completely charged.
  2. Check if the voltage of the charger is correct for the charging case and if the lights on the bottom are glowing to indicate the charge level.
  3. Check by switching the earbuds on manually, press and hold the capacitive touch control for 2 seconds until the LED begins to flash in blue.
  4. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.
  5. Check if the charging pins of the case and earbuds have some dirt accumulation or corrosion and clean them with alcohol swab and then put them back in the case for charge and the earbuds should start charging.

What to do if the in-built controls (CTC) of the device are not working?

  1. Check if the controls do not work while connected to another device
  2. Check if the media player being used supports such controls and if the controls do not function on call or other media players
  3. Check if the controls have been physically damaged or exposed to any hazards.
  4. Check if the control area has some sweat and oil as that might interfere with the capacitive touch control and clean the control area to remove any oil or sweat and the touch control should start working.
Instant Pairing

What to do if Insta Wake & Pair (IWP) is not working for my Airdopes?

  1. Make sure that you have paired the Airdopes at least once to the device you are trying to use IWP with before.
  2. Check if Bluetooth is turned on for your media device and it has the Airdopes in the list of paired devices.
  3. Try factory-resetting the device.
  4. Check if your Airdopes battery case has battery in it to have IWP functioning.
Microphone Functionality

What to do if the voice is muffled during calls/ the microphone has muffled input?

  1. Check if restarting the device resolves the issue.
  2. Check if dust or ear wax as accumulated near or inside the microphone port, there is no blockage on the microphone.
  3. Check if sweat or water has gone inside the microphone.
  4. Check if there are any obstructions between the earbuds and the device and clear them, move the device at a closer range to the earbuds and see if it still affects it.

What to do if a problem related to any functionality occurs in Airdopes 701 ANC?

  1. Check if restarting the device resolves the issue.
  2. Place the earbud’s in the charging case and then try using them again.
  3. Try factory-resetting the device.

General FAQs

Product Functionality

What is Insta Wake N’ Pair (IWP) technology?

  1. Our IWP technology allows the earbuds to connect to your phone, if they have already been paired before instantaneously upon opening the case.
  2. Simply open the case and ensure that the Bluetooth is turned on for your media device, the buds will connect as soon as the case is opened without the need to take them out of the case first.

How to enable IWP for my earbuds?
There is no special process to enable IWP, simply follow the steps to pair your Airdopes to your media device first, then upon subsequent usage the IWP tech will be enabled automatically and the Airdopes will pair automatically to your previously paired media device if Bluetooth is turned on your media device.

Does the Airdopes 701 ANC support aptX codec by Qualcomm?
No. Airdopes 701 ANC does not support aptX codec by Qualcomm.

What is ANC Mode?
Airdopes 701 ANC offers ANC Mode for listening noiseless and disturbance less music. In this mode, through the earbuds only music/audio is sent to the user’s ears shutting all the outside environment sounds.

Can the volume of the earbuds be controlled through integrated controls?
No. The volume cannot be controlled via earbuds and can only be adjusted via phone/media device.

What is Beast Mode?
Beast mode is meant to use for entertainment purposes like gaming / streaming of video / movies etc. It controls the latency of the earbuds synced with your device to make it best suitable for entertainment use. It considerably lessens the lag between the device and earbuds.

How to activate Beast Mode?
Tap on the left earbud’s CTC four times to activate Beast Mode and again four times tap to turn it off.

What is Crystal Mode?
Airdopes 701 ANC offers Crystal Mode for listening to the ambient sound near the user. User can hear the ambient sound clearly even if he/she is listening to the music via the earbuds. In this mode, the microphones of the earbuds get activated to hear outside environment sound more clearly to be aware of the outside environment.

Water/Dust Protection

Are my Airdopes 701 ANC waterproof and sweat resistant?
Yes, Airdopes 701 ANC are IPX7 Dust and Water resistant. You can use it for your workouts or carry them along on long trips.

]]>
boAt Rockerz 450 Pro On Ear Wireless Headphone Manual https://itsmanual.com/boat/rockerz-450-headphone/ Tue, 11 Jul 2023 04:39:33 +0000 https://itsmanual.com/?p=153019 Read More...

]]>
boAt Rockerz 450 Pro On Ear Wireless Headphone User Manual

Introduction

Thank you for choosing the boAt Rockerz 450 Pro. This manual is meant to guide you through to the shores of Nirvana without much difficulty. Please think of this manual as your map. Knowledge of Bluetooth and device connection is essential for steering this boAt. Therefore, we strongly advise that this manual is thoroughly read before use, and referred to in times of difficulty.

Package Contents

  • 1 x boAt Rockerz 450 Pro
  • 1 x USB Type C charging cable
  • 1 x Audio (able
  • 1 x Manual
  • 1 x Warranty Card
  • 1 x Catalogue

Product Overview


Foldable and Portable design

Power On:

Press and hold the MFB (Multifunction Button) for 3 seconds. The blue and red LED light will blink alternatively accompanied by a voice prompt “power on”

Power Off:

Press and hold the MFB for 3 second. A voice prompt power off” accompanied by quick flashes of red LED will indicate the device getting switched off.

Bluetooth Connectivity

  1. Turn on the Bluetooth in your phone and switch on Rockerz 450 Pro by long pressing the MFB for 3 seconds
  2. In case if the headphone is not in pairing mode, then don’t release the button and keep on long pressing the Power button for turning on the Bluetooth pairing mode in the headphone, until the indicator starts blinking in blue and red colours alternatively.
  3. Then, click on the headphones’Rockerz 450 Pro’ from the list of available devices after search
  4. If asked fora passkey, confirm the passkey’0000′ on phone
  5. Once confirmed, the headphone and phone get connected via Bluetooth indicated by a slowly flashing blue indicator Note: If there’s a connection history between the phone and the headphone, then they will automatically get reconnected in a working range

Basic Function

Play Short press the (MFB) once to play
Pause Short press the (MFB) once to pause
Volume Up Press the button in steps to increase volume
Volume Down Press the  button in steps to decrease volume
Next Track Press and hold the button for skipping to next track
Previous Track Press and hold the button for returning to the previous track
Answer Incoming Calls Single press the button
Hang Up Ongoing Calls Single press the button
Reject Calls Press and hold the button for 1 second
Redial Double press the In button
Charging Connect the charger to the Type C port;
steady red indicator switches on while charging
Voice Assistant/Sin Double press the Button

Charging

  • Connect one end of the provided cable to the USB Type C port on the headset and the other end to a wall adapter or laptop
  • While charging the indicator light will turn into steady red
  • When the headphone is fully charged, the indicator switches off
  • Use only authorized/company chargers for the headset, as unauthorized ones may damage the same and invalidate the warranty on the headset as well

Other Functions

  • When Line In inserting is detected, switch to line in mode and disconnect Bluetooth. To connect again to the Bluetooth, pull out the line in and reboot
  • If there’s no connection established when the Bluetooth is switched on then the device powers off automatically after a while
  • If you receive an incoming call during playing music, the music automatically disconnects. When the call is done and disconnected, the music starts to play automatically from where it left.

ANOMALIES & Solutions 

A. Mobile can’t search the headset

  • Check if the Bluetooth headset is powered on or off ( When powered on, the LEDs blink with red and blue colours alternatively)
  • If it is powered on and the device still can’t connect, then please reboot the Bluetooth device and the phone B. After connecting the headset with the phone, disconnection or noise occurs
  • This may be due to the low power of the headset. Please charge the Bluetooth headset.
  • There might be obstruction between the headset and the phone or the distance between them exceeds the maximum range for signal reception.

Specification

Headphone Type On-Ear Bluetooth Headphones
Driver Size 40mm
HD Sound Yes
THD 5%
Frequency Range 2.4GHz-2.480GHz
SNR -79dB
Bluetooth Version V5.0
Bluetooth Profile A2DP, VARCP, HFP,HSPV
Bluetooth Range 10m
Battery Capacity 750mAh
Playing Time Up to 70 Hours (At 60% vol approx.)
Charging Time 2-3 hours
Standby Time 500-600H
Charge Interface USB Type C
Mic Sensitivity 38+/-3dB
Charging Voltage 5V 2A
AUX Connectivity Yes

Safety Precautions

  • This is not a toy. The children are advised to use this under adult supervision.
  • Avoid exposing the device to extremely hot or cold temperatures
  • Avoid using the headphone for listening to full volumes to protect from hearing damage.
  • Please do not use the device under thunder storms.
  • Don’t dismantle the product in any way.
  • Please don’t clean the product using oily volatile liquid.

 

]]>
boAt Stone 1000 Wireless Bluetooth Speaker Manual https://itsmanual.com/boat/stone-1000-speaker/ Wed, 05 Jul 2023 16:08:55 +0000 https://itsmanual.com/?p=143607 Read More...

]]>

boAt Stone 1000 Wireless Bluetooth Speaker

 

Accessories

  1. BT Speaker
  2. Micro USB Cable
  3. Aux in Cable
  4. User Manual
  5. Warranty Card

User Manual
Stone 1000 is IPX-5 water and dust resistant. To ensure your Stone 1000 is prepared for use in a wet environment, remove all cable connections and tightly close the lid. If the water lid is not properly closed, the speaker will not be water resistant.

CHARGING
Before using your Stone 1000, please charge it using the micro USB charging cable included in the package. Please note: Most USB chargers are compatible with Stone 1000. For optimal AC charging please use a 1.0A USB charger. Plug the small micro USB pin into the charger port on the side of the speaker and the other end of the cable (the standard USB 2.0 plug) into any standard USB port (such as a computer or USB charger). The LED light will automatically glow indicating charging mode. When it is fully charged, the LED indicator light will turn o. A full charge takes about 4 hours. The speaker can be charged while playing music. The battery of the speaker will be charged until the charging process completes.

PAIRING
Turn your speaker on. The Bluetooth LED indicator on the control panel will flash blue. Enable your Bluetooth device such as cell phones, tablets or other Bluetooth media and make sure it is in searching mode. Select “boAt Stone 1000 speaker” in the list shown in the Bluetooth device.
Note: – if your Bluetooth device version is below V2.0. please enter password “0000” for a connection. The speaker will automatically reconnect to last connected Bluetooth enabled audio device.

HANDS-FREE SPEAKERPHONE
You can use Stone 1000 as a portable speakerphone for incoming calls when connected wirelessly and outgoing calls via Bluetooth. Take your calls by pressing the “>ll”. Press once again for ending the call, double press “>ll” button to reject an incoming call. Music will resume automatically. To make a call, simply dial your cell phone and talk through the speaker. Once your call is connected chose Stone 1000 in the headset options.

Controlling System

SPECIFICATION

  • Model : Stone 1000
  • Bluetooth speaker : Yes
  • Impedance : 4
  • Frequency range : 20Hz-20KHz (-10dB)
  • Output : 14W
  • Driver : 1.75”
  •  S/N : >60dB
  • BT Range : 10m
  • Playing Time : 8-9 hours
  • Charging Time : 4 hours
  • Talk time : 18 hours
  • Battery : 3000 mAh

NOTE: – Do not expose the built-in battery to excessive heat, including direct sunlight and fire. This speaker is in compliance with the specified BT version it does not guarantee compatibility of all functions on every BT enabled device. Please check with your mobile phone at the compatibility and functionality.

OPERATION INSTRUCTION

VOLUME ADJUSTMENT
At any time during a phone call or while playing music the volume can be changed with the “+” or “-” button. To raise the volume press and hold the “+” for 1 second. To lower the volume press and hold “-” button for 1 second there will be a tone from the speaker to indicate that the level has reached maximum or minimum volume.

CHANGING TRACKS
Simply press the “>” or “<” button for 1 second on the stone 1000 to change tracks.

PLAY AND PAUSE
Press the “>ll” on the speaker’s control board to play/pause the music.

MODE SWITCH BUTTON
Press the “M” button to disconnect or connect Bluetooth connection. Press the “M” button to switch modes. (BT, Aux In)

TROUBLESHOOTING

  • Unable to pair with a Bluetooth device: check that you do not have an audio cable connected to the Aux in socket. Ensure that you are within range of the wireless Speaker for wireless functionality, 10 meters or less (33 feet or less).
  • Check that the device you are attempting to pair with supports A2DP stereo audio transmission.

SAFETY INFORMATION

WARNING

Please read these safety warnings and cautions carefully to ensure your personal safety and prevent product damage.

Fire and Electric Shock Hazard

  • Do not expose your Stone 1000 to extremely high or low temperatures.
  • Do not leave your Stone 1000 in direct sunlight for extended periods of time.
  • Do not leave your Stone 1000 near open flames such as cooking burners, candles, or fireplaces.
  • Do not block any ventilation openings

Battery/Charger Hazard

  • Do not dispose of your Stone 1000 in a fire. The battery could explode causing injury or death.
  • Only charge the battery in accordance with the user instructions supplied with the Stone 1000.
  • Do not attempt to disassemble the Stone 1000 charger or force open the built-in battery because this may result in electric shock.
  • Do not clean the Stone 1000 when it is being charged. Always unplug the charger first before cleaning the Stone 1000.

Automobile Accident Hazard

  • Do not leave or store the Stone 1000 or any of its accessories near or over your automobile’s air bag because serious injury may result when an air bag deploys.

CAUTION

  • Do not use abrasive cleaners to clean your Stone 1000 because this could cause scratches and damage.
  • Do not bring your Stone 1000 into contact with any sharp objects because this could cause scratches and damage.
  • Do not insert anything into your Stone 1000 unless otherwise specified in the user instructions. This may damage the internal components.
  • Do not attempt to repair, modify, or disassemble your Stone 1000 yourself, it does not contain any user-serviceable components.
  • Do not attempt to replace your Stone 1000 battery, it is built-in and is not changeable.
  • Observe all signs and displays that require an electrical device or RF radio product to be switched in designated area.
  • Turn off your Stone 1000 prior to boarding an aircraft. Do not use Stone 1000 inside an aircraft unless allowed by your airline.
  • Dispose of the Stone 1000 and the Stone 1000’s battery in accordance with local regulations. Do not dispose of the battery with regular household waste.
]]>
boAt Rockerz 650 Manual https://itsmanual.com/boat/rockerz-650/ Wed, 05 Jul 2023 10:51:01 +0000 https://itsmanual.com/?p=142893 Read More...

]]>

 

User Manual

Troubleshooting FAQs

Charging

How to charge Rockerz 650?
Use a USB Type C charging cable to charge the earphone through either a laptop or an adaptor.

What to do if the headphone is not charging or if the battery life is low?

  1. Check to see if the Type C charging cable being used is working and are of specification mentioned in the manual.
  2. Check the charging of the headphone by using another Type C charging cable or try using the same Type C charging cable on another device to determine if the charging cable is faulty or not.
  3. Check if the specification (voltage/current) of the charger is correct for the device or not. A 5V, 2A charger should be used to charge the headphone.
  4. Check if the charging is done till the red LED turns completely green on the left earcup of the headphone.
  5. Check if the headphone/battery was not tampered with or exposed to any electrical damage.
  6. Check if the charging port is not clogged with dirt. If so, please clean it with a cotton swab or blow dry it to remove any clogged dirt.
  7. Check if the pin of the Type C charging port is tampered with or damaged or any liquid damage is present or not.
Poor Sound Quality

What to do if the sound is distorted/low volume/low bass/low quality?

  1. Check if connected device does not have any equalizer settings applied or not. If applied then change the equalizer setting to standard/normal and then check the sound of the headphone again.
  2. Check if the device is in the range of Bluetooth (10m) and if there are any obstructions in between the headphone and the media device or not.
  3. Check if the device has issues even after moving it closer to the connected device and removing any obstructions.
  4. Check if the distortion or quality lowers at all volumes or only at high volumes.
  5. Check the sound quality on different media players and different devices and if the distortion happens on all devices/media players or only on specific ones.
  6. Check to see if the earcups have ear wax accumulated or not. If so, please clean it with cotton swab and mild alcohol, after doing so gently blow dry it from a distance.

What to do if the volume of the headphone automatically changes?

  1. Check if connected media device is having any equalizer settings applied or not. If applied then change the equalizer setting to standard/normal and then check the sound of the headphone again.
  2. Check if the issue is occurring on different media players and in different devices or only in a single device or media player.
  3. Check if connected device does not have any equalizer settings applied.
  4. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.
  5. Check if the buttons are not stuck between the control board and port. Use a tooth pick to pick out the button to bring it back to position.
Bluetooth Connectivity

How to pair Rockerz 650 with other media devices?

  1. When switched OFF, press & hold the MFB (multifunction button) for 3 seconds to switch ON the earphones. The earphone will automatically enter the pairing mode with a prompt.
  2. Open Bluetooth on your device and search for “Rockerz 650” in the list of available devices.
  3. Choose “Rockerz 650” from the list and if asked then enter the pairing password ‘0000’ to establish Bluetooth connectivity. Once confirmed, the headphone and the phone are connected via Bluetooth.

Note: If there’s a connection history between the phone and the headphone, then they will automatically get reconnected in a working range.

How to activate dual pairing in Rockerz 650?

  1. To connect Rockerz 650 to two devices simultaneously, first connect the earphone to one of the devices. Then switch OFF both the earphone and the device.
  2. Now connect the earphone to the second device and again switch the first device ON. The earphone will get connected to both the devices.
  3. IF not connected, then connect the first device manually once again to activate dual pairing.

What to do if the headphone is not connecting via Bluetooth?

  1. Check if the issue is occurring on different media players and in different devices or only in a single device or media player.
  2. Check if connected device does not have any equalizer settings applied.
  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.
  4. Check if the buttons are not stuck between the control board and port. Use a tooth pick to pick out the button to bring it back to position.

What to do if the headphone is not able to dual pair?

  1. Check to pair the Rockerz 650 to first phone per usual pairing procedure, then switch it off. Then switch ON the earphone again and enter pairing mode, enable Bluetooth function in second phone, find earphone’s Pairing Name “Rockerz 650’” and pair to second phone per usual procedure.
    Switch off earphone one more time. Then simply switch on earphone, without entering pairing mode (a short press until white light comes on). The earphone should automatically re-connect to the last connected phone (which is the second phone). Then find headset “Rockerz 650″ in first phone’s Bluetooth setting, select this to pair to first phone. Both phones should now be paired to the earphone.
  2. Check to try dual pairing with other devices to see if it works with them.
Dysfunctional Voice Assistant

What to do if the voice assistant does not wake up?

  1. Check if the pairing device has the feature enabled. Google Assistant or Siri should be enabled to use this feature from your device.
  2. Touch and hold on the touchpad of the right earcup until default Voice Assistant wakes up on the media device. This should allow Google Assistant or Siri to pop up on your media screen. Though under some circumstance, this feature may or may not work on some devices which may be restricted by default.
    Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.
Other Functional Issues

What to do if the headphones are not turn ON or if one side earcup is not working?

  1. Check to see if the device has been properly charged first till the red light turns off from steady.
  2. Check if the voltage of the charger is correct for the device, use only 5V 2A Chargers.
  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.
  4. Check if the earcups are inserted well into our ear canal and the volume is not at zero level
  5. Check if the cables are twisted/tangled, if so, untangle them to regain working condition.

What to do if the in-built controls of the device are not working?

  1. Check if the touch controls are working or not while connected to another media device.
  2. Check by forgetting the headphone in the Bluetooth settings of the media device and re-pair the headphone again with the media device.
  3. Check if the media player being used for music supports such controls present in the headphone.
  4. Check if the controls do not function on call or other media players or not.
  5. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.
Microphone Functionality

Does Rockerz 650 have a dedicated microphone?
Yes, Rockerz 650 headphones has a dedicated mic perfect for calls and recording.

What to do if the microphone of the headphone is not working?

  1. Check to see the microphone is not being blocked.
  2. Check to see if the microphone is being held at the adequate distance for it to be able to pick up the voice.
  3. Check if the microphone was not exposed to any hazards like direct sunlight or fire.
  4. Check if the microphone was not exposed to water above the resistance or dipped in any liquid.
  5. Check if the mic hole is not clogged with dirt of sweat. If so, use cotton swab or toothpick to clean out the port holes or a dryer to dry out any water that maybe collected.

General FAQs

Technology

Does the headphone support aptX?
No. Rockerz 650 does not support aptX.

Does the headphone support low latency?
No. Rockerz 650 does not support low latency but it can be used for casual gaming, entertainment, streaming etc

Does the device have cVc?
No. Rockerz 650 does not support cVc technology.

Device Controls

What is Signature Sound Mode & Balanced Mode? How to switch between both the Modes?

  1. Signature Sound Mode is boAt’s default Bass Mode while Balanced Mode is more suitable for podcasts, news and voice based media.
  2. You can switch between Signature Sound Mode (Bass Mode) and Balanced Mode by short pressing the EQ button.

How to Power ON/OFF Rockerz 650?

  1. When switched off, press and hold the Multifunction button for 3 seconds. A voice prompt “Power ON” will confirm the same.
  2. The Red & Blue LED flashes to indicate the same.

In any mode, press and hold the Multifunction button for 5 seconds. A voice prompt “Power OFF” will confirm the same.

How to adjust volume?
Tap the volume (+) button to increase the volume to your preference level.
Tap the volume (-) button to decrease the volume to your preference level.

How to play/pause?

Press the multifunction button to play/pause music.

How to answer/end calls?
Tap the Multifunction button once when answering or ending a call to complete the action.

How to reject calls?
Double tap the Multifunction button to reject an incoming call.

How to change tracks?
Next Track: Press and hold the ‘+’ button to play the next track.
Previous Track: Press and hold the ‘-’ button to return to the previous track

How to activate Voice Assistant?
Double tap to connect with Google & Siri and activate the voice assistant.

Can users change voice prompts or update the software of the headphone?

No, it is recommended that you do not perform such actions or it may void your warranty credentials and damage your product.

Device Charging

How long does it take to charge? Does it support fast charging?
Rockerz 650 takes 1H to charge. It does not support fast charging.

Can I charge my headphones with a mobile charger?
Yes, Rockerz 650 wireless headphones can be charged with a mobile charger.

Does Rockerz 650 have Aux support?
No, Rockerz 650 does not have AUX support

]]>
boAt Rockerz 205 Pro Manual https://itsmanual.com/boat/rockerz-205-pro/ Tue, 04 Jul 2023 09:45:46 +0000 https://itsmanual.com/?p=141002 Read More...

]]>

user manual

Specifications

Troubleshooting FAQs

Charging

How to charge Rockerz 205 Pro?
Use a USB Type C charging cable to charge the earphone through either a laptop or an adaptor.

What are the battery indications?
Low Battery: When the remaining talk time is less than 10 minutes, there is a “Low Battery” prompt and the Red LED flashes quickly to indicate the same.
Charging: Solid Red LED indicates that the earphone is being charged. (Note that the earphone cannot be turned ON while charging).
Fully charged: Solid Blue LED indicates the same.

What to do if the earphones are not charging or if the battery life is low?

  1. Check to see if the charging wire being used is working – check to use another charging wire or try using the wire on another device.
  2. Check if the voltage of the charger is correct for the device, use only 5V 2A chargers.
  3. Check if the charging is done till the red light turns completely blue.
  4. Check if the battery was not tampered with or exposed to any electrical damage.
  5. Check if the charging port is not clogged with dirt. If so, please clean it with a cotton swab.
  6. Please check if the adapter and charging cable support fast charging.
Poor Sound Quality

What to do if the sound is distorted/low volume/low bass/low quality?

  1. Check if connected device does not have any equalizer settings applied.
  2. Check if the device has issues even after moving it closer to the connected device and removing any obstructions.
  3. Check if the distortion or quality lowers at all volumes or only at high volumes.
  4. Check using different media players and different devices and if the distortion happens on all devices or only on specific ones.
  5. Check to see if the earbuds have ear wax accumulated. If so, please clean it with cotton swab and alcohol, after doing so gently blow dry it from a distance.

What to do if the volume of the earphone automatically changes?

  1. Check if connected device does not have any equalizer settings applied.
  2. Check using different media players and different devices and if the volume change happens on all devices or only on specific ones.

The sound is not very clear/the caller cannot hear my voice clearly. What should I do?
Please adjust the volume on your phone and earphones. Make sure there is no source of interference nearby and the smartphone is within range.

Bluetooth Connectivity

How to pair Rockerz 205 Pro with other media devices?

  1. When switched off, press and hold the multifunction button (MFB) for 3 seconds to switch the earphones on. The earphones will automatically enter in pairing mode with a prompt; the blue and red LEDs will flash alternatively to indicate the same.
  2. Open Bluetooth on your device and search for ‘Rockerz 205 Pro’ in the list of available devices.
  3. Choose ‘Rockerz 205 Pro’ from the list and if asked, enter the pairing password ‘0000’ / ‘1234’ to establish Bluetooth connectivity.
  4. Once successfully connected, the blue LED flashes twice in every 4 seconds to indicate the same.

Note: The neckband automatically turns off after 5 minutes if no connection is established within this time.

What to do if the earphone is not connecting via Bluetooth?

  1. Check to see if the device is in pairing mode – Hold the Multifunction button for 5 seconds until the red and blue LED light ON the device starts flashing alternately.
  2. Check if the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.
  3. Check if it works after clearing the pairing list on the device, Press and hold the volume “+” button and the volume “-” button for about 5 seconds in standby mode to clear paired list of devices.
  4. Check if the device being connected to supports Bluetooth connections.
  5. Check if it is a passcode issue and if so enter ‘0000’ or ‘1234’.
  6. Check to see if the device being connected to does not have any software issues – Check to forget the device on Bluetooth, update the mobile software.

How to establish dual pairing?

For connecting Rockerz 205 Pro to two devices simultaneously, first connect the earphones to one of the devices. Then switch OFF the earphones and the device both. Thereafter, connect the earphone to the second device and again switch ON the first device. The earphone will get connected to both the devices. If they don’t, connect the first device manually once again to activate dual pairing.

What to do if the earphone is not able to dual pair?

  1. Check to Pair the boAt Rockerz 205 Pro to first phone as per usual pairing procedure, then switch it off. Then switch on the earphone again and enter pairing mode, enable Bluetooth function in second phone, find earphone’s Pairing Name “boAt Rockerz 205 Pro” and pair to second phone per usual procedure. Switch off earphone one more time. Then simply switch ON earphone, without entering pairing mode (a short press until white light comes on). The earphone should automatically re-connect to the last connected phone (which is the second phone). Then find headset “boAt Rockerz 205 Pro” in first phone’s Bluetooth setting, select this to pair to first phone. Both phones should now be paired to the earphone.
  2. Check to try dual pairing with other devices to see if it works with them.

Why the connection is not stable and is breaking intermittently?
Please ensure that there are no objects between the earphones and your wireless device. Also, please ensure that there is no radio or Wi-Fi interference nearby.

How to reset/clear paired devices?
Long press both the volume buttons for 5 seconds at the same time. The red and blue lights flash thrice simultaneously. This will clear all the paired devices history from the device.

How is auto pairing status indicated?
Red and blue LEDs light up automatically and enter the pairing state after flashing thrice simultaneously.

Dysfunctional Voice Assistant

What to do if the voice assistant does not wake up?

  1. Check if the pairing device has the feature enabled. Google Assistant or Siri should be enabled to use this feature from your device.
  2. Please follow the steps carefully, long press for 2 seconds and release, this should allow Google Assistant or Siri to pop up on the media screen of the device. Though under some circumstance, this featuremay or may not work on some devices which may be restricted by default.
Other Functional Issues

What to do if the earphones do not turn ON or if one side earcup is not working?

  1. Check to see if the device has been properly charged first, till the red light turns blue.
  2. Check if the voltage of the charger is correct for the device, use only 5V 2A Chargers.
  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.

What to do if the in-built controls of the device are not working?

  • Check if the controls do not work while connected to another device
  • Check to forget the device and re-pair it.
  • Check if the media player being used supports such controls.
  • Check if the controls do not function on call or other media players
  • Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.
​Microphone Functionality

Does Rockerz 205 Pro have a dedicated microphone?
Yes, Rockerz 205 Pro earphones has a dedicated mic perfect for calls and recording.

What to do if the microphone of the earphone is not working?

  1. Check to see the microphone is not being blocked by any particles.
  2. Check to see if the microphone is being held at the adequate distance for it to be able to pick up the voice.
  3. Check if the microphone was not exposed to any hazards like direct sunlight or fire.
  4. Check if the microphone was not exposed to water above the resistance or dipped in any liquid.

General FAQs

Technology

What is ASAP charge technology?
ASAP Charge is boAt’s very own patented technology. It lets your device charge at an incredible charging speed (may vary under some circumstance) where 10 mins of charging can give up to 10 hours of playback time.

How to activate BEAST Mode in Rockerz 205 Pro?
Single press the Beast Mode quick switch button to activate low latency BEAST Mode. To turn it off, single press the same.

What is ENx Tech? Does Rockerz 205 Pro support it?
ENx Tech algorithm cancels out the background noise so that you can hear a crystal clear sound via voice calls. One needs to activate ENx as the mic is equipped with the same and activated by default. Rockerz 205 pro does support ENx Tech.

Does the device support ENx Technology?
Yes. Rockerz 205 Pro supports ENx Technology.

Does Rockerz 205 Pro support low latency?
Yes. Rockerz 205 Pro does feature low latency for all the entertainment needs. While gaming is still subjective though because it all depends on the media device too. It is okay for casual gaming, but not professional gaming.

How to activate low latency?
This does not need any trigger for it to activate. Once connected with your device, the processors initiate internal run for low latency automatically.

Device Controls

How to Power ON/OFF Rockerz 205 Pro?

  1. When switched off, press and hold the Multifunction button for 3 seconds. A beep prompt will confirm the same.
  2. The Red & Blue LED flashes to indicate the same.
  1. In any mode, press and hold the Multifunction button for 5 seconds. A beep prompt will confirm the same.
  2. The Red & Blue LED flash for 1 second before the device turns OFF.

How to adjust volume?
Tap the volume (+) button in steps to increase the volume. A beep will indicate the maximum volume.
Tap the volume (-) button in steps to decrease the volume. A beep will indicate the minimum volume.

How to play/pause?
Single tap on the multifunction button to play/pause music.

How to answer/end calls?
Tap the Multifunction button once when answering or ending a call to complete the action.

How to change tracks?
Long press the (Volume +) button to skip forward to next track.
Long press the (Volume -) button to go back to previous track.

How to reject calls?
Press and hold the Multifunction button for 2 seconds during an incoming call to reject the call. A beep will indicate this.

How to redial?
Triple tap the Multifunction button for redialling the last contacted number.

How to activate Voice Assistant?
Long press the multifunction button for 2 seconds to activate Voice Assistant. (Make sure your phone’s Voice Assistant is enabled before use).

What can I do with the inline buttons?
You can change tracks, adjust volume, take and reject calls, redial, and access voice assistant with the inline buttons. For further information, please refer to the user manual.

How to switch between calls from multiple devices?
If the device is connected to multiple mobile phones and you are already taking a call on one of the devices when the second mobile phone begins to ring, press the MFB button to switch to the second call, placing the first one on hold. One can continuously switch between the two calls using the multifunction button.

How to transfer call between headset and the phone?
Press & hold the multifunction button to transfer the call from the earphone to the phone or vice versa.

Device Charging

How long does it take to charge? Does it support fast charging?
Yes, Rockerz 205 Pro supports ASAP Fast Charging Technology. One can get a full charge within 50 minutes.

How long does boAt Rockerz 205 Pro last on a single charge?
Rockerz 205 Pro wireless earbuds offer battery backup of up to 20 hours (at 100% volume) on a single charge.

Can I charge my earphones with a mobile charger?
Yes, Rockerz 205 Pro earphones can be charged with a mobile charger.

Water/Dust Protection

Is Rockerz 205 Pro Waterproof? Can I submerge my device in water?
Yes, Rockerz 205 Pro is IPX5 certified which means it can withstand up to low pressure water jet spray but it cannot withstand submerging it into the water. It is recommended not to use it during swimming sessions.

]]>
boAt Rockerz 245 V2 Wireless Bluetooth Headset Manual https://itsmanual.com/boat/rockerz-245-v2-headset/ Tue, 04 Jul 2023 09:08:18 +0000 https://itsmanual.com/?p=140273 Read More...

]]>
boAt Rockerz 245 V2 Wireless Bluetooth Headset Instruction Manual

That you for choosing the boAt Rockerz 245v2.11is manual is meant to guide you through to the shores of Noma without too much difficulty. Please think of this manual as your map. Knowledge of Bluetooth and device correction is essential for the steering of this boat. Therefore, we strongly advise that this manual is thoroughly read before beginning of use, and refened to when m times of difficulty. Air you ready to Plug into Nirvana?

Package contents

  • 1 x boAt Rocket’ 245v2
  • 1 x Micro USB charging cable
  • 2 x Pairs of additional earbuds ( Smal & large)
  • 1 x Manual
  • 1 x Warranty Card

Product Diagram

To Pair with Bluetooth

When switched off, press the multifunction button for 5 seconds to enter pairing mode. The earphones will automatically enter pairing mode with a prompt and the LED light will flash white and blue lights flash to indicate this.

  1. Open Bluetooth an you device and search for boAt Rixiterz 245v2tin the list of available devices,
  2. Choose “boAt Rrxkerz 245v7 from the list and enter the pairing password ‘0000” to establish Bluetooth connectivity.
  3. A yoke prompt-You’re now connected to boAt Rockers 245v2″wil be heard to confirm the connection. The blue LED light flashes twice every 4 seconds when connected.

Functions

  1. Power on: When switched off, press and hold the multifunction button for 3 seconds. A voice prompt ‘power cm’ will confirm the same. The red and glue LEDs wil flash.
  2. Power off In any mode, press and hold the mull multifunction button for 5 seconds. A voice tone ‘power off “will confirm the same. The red and blue LED’s will flash for 1 second before the device will turn off.
  3. Play/Pause:Tap the multifunction button nice to play/pause MUSK.
  4. Volume up: Tap the volume +”buttons in steps to increase the volume. A beep wil indicate maximum volume.
  5. Volume down: Tap the volume” “button in steps to decrease the volume. A beep will indicate minimum volume.
  6. Answer/Fed call’ Tap the multifunction button once when answering or ending a Call to complete the action.
  7. Reject call: Press and hold the multifunction button for 1 seconds when receiving a call to reject it. A beep will indicate this.
  8. Previous Track To go to the previous track, press and hold the “.” button for 2 seconds.
  9. Next Track To skip to the next track, press and hold the”÷” button for 2 seconds.
  10. Voice Assistant Click the Multi-function &Mon for 3 tines to activate Voice Assistant

To Charge: Use a micro U58 charging cable to charge the earphone through either a laptop or an adaptor

  1. low Battery The remaining talk time is less than 10 minutes. There wdl be a *tone and a reminder every minute.
  2. Charging: The red light is steady (please note that the earphone cannot be tum on when charging).
  3. Fully charged: the blue light is steady.

Specifications

Bluetooth version 5.0 Transmission distance about 10m
Speaker size 12m Battery Size Polymer lithium Battery 3.7v/100mAH
Frequency range 20-20000Hz Charging time about 1.5 hours
Impedance 322±15% play/take time about 18 hours
Sensitivity 105±3dB Standby time about 180 hours
Microphone Sensitivity 42±3 db Magnetic suction Basic suction

Troubleshooting

Problem Cause Problem Problem Solution
Not Loading Battery is exhausted Fully charge with the charger
Long press the power button for too short Press and hold the main button for 3 seconds to restart
Not Charging Charging plug is not plugged in Reinsert the charging plug
Not Shut down Misoperation caused the headset program to go wrong Charge reset with the charger
Unable to search pair failed The headset did not enter
paring status
Put the headset into the pairing state
reset
Mobile phone Bluetooth application error Turn off the phone and reboot

Safety Caution

  • Please don’t dismantle the product in any way or remove the product’s battery by yourself, as this can lead to a re or electrical breakdown. Any maintenance or servicing of the earphones should be done only through a qualied service provider/manufacturer
  • Please clean the earphones with the utmost of care with only a damp soft cloth, if cleaning is required. Please do not use any oily volatile liquid. In addition, ensure that the earphones are kept away from extremely hot or cold substances.
  • Any damage to the earphones that is NOT a manufacturing issue will make the products warranty null and void.
  • Do not use earphones when it is unsafe to be wearing them, such as while operating a vehicle, crossing a street, or during any activity where full awareness of your surroundings is required.
  • To avoid damage to your hearing, make sure that the volume on your music player is at an appropriate level when you are Plugging into Nirvana. Exposure to any noise levels at or above 85 dB can gradually lead to a loss of hearing.

]]>