EEPROM – ItsManual https://itsmanual.com Owner's manuals for all sorts of products Tue, 04 Apr 2023 14:33:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://itsmanual.com/wp-content/uploads/2021/09/favicon.ico EEPROM – ItsManual https://itsmanual.com 32 32 EEPROM CH341A 24 25 Series Flash BIOS USB Programmer Manual https://itsmanual.com/eeprom/ch341a-24-flash-bios/ Tue, 04 Apr 2023 14:33:23 +0000 https://itsmanual.com/?p=58507 Read More...

]]>  

EEPROM CH341A 24 25 Series Flash BIOS USB Programmer

Features:

  • The main purpose of the CH341A Programmer is to back up, erase, program, calibrate, and other actions on various software.
  • Erase / programming speed is probably 2-3Mbit check every minute.
  • Supports EEPROM 24 series ST, WINB IND, AMIC, MXIC, SST, SPANSION, EON, PMC, etc. & 25 series chips.
  • Support most 24 / 25 Series EEPROM BIOS SOP8 SOP16 chips on the market. (Note: Due to the characteristics of the CH341A chip, the ESMT SST class 25 chip can only be read and cannot be written).
  • Support 3 power supply modes: 5V external power supply; 3.3V external power supply; external power supply (requires 3.3V-5V).
  • Original CH341A chip with stable performance. CH341A chip is used for USB communication which is faster than ordinary ATMEGA8.

Product Details:

Usage Instructions:

  • GND: Connect to GND
  • RXD: connect to MCU.TX (signal flow: MCU.TX >> FT232 >> PC.RX)
  • TXD: Connect to MCU.RX (signal flow: MCU.RX << FT232 << PC.TX)
  • 3V3/5V: output 3.3V or 5V (the module is powered by USB, the jumper must be jumped to 3.3V or 5V)
  • RTS: connect to MCU.CTS (signal flow: MCU.CTS << FT232 << PC.RTS)
  • CTS: connect to MCU.RTS (signal flow: MCU.RTS >> FT232 >> PC.CTS)

Dimensions:


]]>