Tip: A wrong operation can cause a inaccurate measurement result, the correct measured distance is 1-5 cm to forehead (between the eyebrows). July 2020 VER.1.0

Introduction

Your new non-contact forehead thermometer uses advanced infrared (IR) technology to measure temperature instantly and accurately on the forehead or object.
Easy to use and less measurement time. This thermometer does not need to contact body or object to ensure the safety and hygiene. Its ergonomic design makes this thermometer be simple and very easy to check the temperature. It only takes 1 second to take measurement and reading.
Body and object modes
This thermometer supports to measure temperature of body and object. Measuring range of object mode is 0.0 to 100.0 °C(32.0 °F~212.0 °F).That mean s except to take body temperature, it also supports to take the surface temperature of object as below, .Surface temperature of milk in the bottle .Surface temperature of baby bath .Environment temperature
Alarm sounds when body temperature is over 38.5 °C, an alarm sounds for 3 times.
Memory function
It stores up to 1 sets recent measurement data.
Auto power off
Automatically power off if left idle for 30 seconds .
Measurement
Measurement time interval in 15s and the measurement distance is within 1-5 cm.

Please read the manual carefully before you use the unit, and keep for future reference

Safety Information

This thermometer is not intended to substitute for a consultation with your physician. The forehead scan temperature serves as a reference only. It cannot be a judgment on fever.
Basic safety precautions should always be observed,especially when the thermometer is used on or near children and disabled persons.
Please place the device unreachable by young.
Avoid direct sunlight.
Do not touch the lens.
No modification of this device is allowed.
The swallowing of small parks like packing bag, battery, battery cover and so on may cause the suffocation.
Please do not use a dilution agent, alcohol or petrol to clean the unit. Please treat is gently and prevent the falling from a high place.
Please do not immersed it in liquid.
Never leave battery in the battery compartment fora long time without use, as they may leak and cause damage to the unit.
Please take off the battery if you do not intend to use within 3 months. Replace with new batteries if the unit display a low battery symbol.
Do not mix the old and new batteries together.
This article is not for professional usage.

To ensure the correct use of the product, basic safety measures should always be followed including the warning and the caution symbols listed in the instruction manual :

Symbol descriptions
The following symbols may appear in this manual, on the label, on the device, or on its accessories. Some of the symbols represent standards and compliance associated with the device and its use.
	WARNING :This alert identifies hazards that may cause serious personal injury or death .
	CAUT ION :This alert identifies hazards that may cause minor personal injury, product damage, or property damage.
	Type BF applied part
	Manufacturer
	Specifies serial numbe
	DISPOSAL : Do not dispose this product as unsorted municipal waste. Collection of such wast e separately for special treatment is necessary.
	Direct current
	Operating instructions
	Consult accompanying documents

WARNING 
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Classification

1. Internally powered equipment;
2. Type BF applied part;
3. Protection against ingress of water: IPX0;
4. Not category AP/APG equipment ;
5. Mode of operation : Continuous operation ;

Note : the user must check that the equipment functions safely and ensure that it is in proper working condition before it being used.

Product structure

Body

1. Display screen
2. Mode switch
3. Sensor probe 1
4. Down (-) button
5. Up (+) button
6. Setting button
7. START/STOP button
8. Battery cover

Display

1. Object temperature indicator
2. Body temperature indicator
3. Temperature unit
4. Memory mode
5. Low battery indicator
6. Sound indicator
7. Temperature reading

Battery Installation

1. Remove the battery cover from the battery compartment as the arrow direction accordingly.
   
2. Insert 2 pcs 1.5 V AAA size alkaline batteries, and ensure each battery is in the proper direction.Close the battery cover.

Low battery and replacement
During power on, the low battery symbol will display once the unit starts to work, and you should replace with new batteries, otherwise the unit can not work.

Battery type and replacement
Please use 2 pcs of AAA identical 1.5V alkaline batteries. Do not use the batteries beyond their expiry date . Please remove the batteries if you do not need to use for long time .

WARNING
Dispose the battery in accordance with all federal, state and local laws .To avoid fire and explosion hazard, do not burn or incinerate the battery.

Setting

How to set

Use of the unit

Pre-measurement
About normal body temperature & fever the temperature in the forehead and temple area differs from the internal temperature, which is taken orally or rectally. Vasoconstriction, an effect which constricts the blood vessels and cools the skin, can occur during the early stages of a fever. In this case, the temperature measured by the non-contact thermometer may be unusually low. If the measurement therefore does not match the patients own perception or is unusually low, repeat the measurement every 15 minutes. As a reference, you can also measure the internal body temperature using a conventional oral or rectal thermometer.

Body temperature can vary from one individual/person to next. It also varies by location on the body and time of day. Below shows the statistical normal ranges from different sites.

Please keep in mind that temperatures measured from different
sites, even at the same time, should not be directly compared. Fever indicates that the body temperature is higher than normal. This
symptom may be caused by infection, overdressing or immunization. Some people may not experience fever even when they are ill.

These include, but are not limited to, infants younger than 3 months old, persons with compromised immune systems, persons taking antibiotics, steroids or antipyretics (aspirin, ibuprofen, acetaminophen), or persons with certain chronic illnesses. Please consult your physician when you feel ill even if you do not have fever.

Table* 1 Body Site Normal Temperature Range

Measuring procedure
As a body thermometer
1) Select body mode , the temperature unit will appear. (Picture at right)

2) Move the probe close to the forehead, make sure the probe is flat and take measurement with a distance within 1-5 cm.Press Start/Stop button.

3) The measurement will be finished in 1 seconds, when it has been completed, you can hear 3 short beeps, at the same time, the reading will appear on the display.

Note:

• If the reading is <37.5°C(99.5°F) and 32°C(89.6°F) the display
  will show with green backlight.
• If the reading is between value 37.5-38.5°C(99.5-101.3°F), the display will show together with 1 short beeps, the orange backlight lasts for alarm.
• If the reading is above value 38.5°C(109.4°F), the display will show together with 3 short beeps, the red backlight lasts for alarm.
• As the forehead measurement temperature is likely to be affected by sweat, oil and the surroundings, the reading shall be taken as a reference only.
• If the probe is placed at an angle close to the forehead measurement, the reading will be affected by surrounding temperature.
• Babies’ skin reacts very quickly in the ambient temperature. Therefore, do not take their temperature with the non-contact thermometer during/after breastfeeding, because the skin temperature maybe lower than the internal body temperature.
• The thermometer will automatically turn off if left idle for 30 seconds.

Measuring procedure

As a object thermometer

1. Select Object Mode, the temperature unit will appear. (Picture at right)
   
2. Move the probe close to the object, make sure the probe is flat and take measurement with a distance within 1-5cm. Press the Start/Stop button to take measurement
   
3. The measurement will be finished in 1 seconds, when it has been completed, you can hear 3 short beeps, at the same time, the reading will appear on the display
   

Note :

• As the object scan temperature is likely to be affected by the surroundings, the reading shall be taken as a reference only.
• If the probe is placed at an angle close the object scan, the reading will be affected by surrounding temperature.
• The thermometer will automatically turn off if left idle for 30 seconds.

Troubleshoot

Error indicators
The following symbols will appear on the display when measurement is abnormal

Symbol	Correction
	In body mode. Measured temperature is above measuring range of >43.0°C(109.4°F) It is shown on the LCD with red LED.
	In body mode. Measured temperature is bellow Measuring Range of <32°C/89,6°F It is shown on the LCD with red LED.
	In object mode. Measured temperature is above measuring range of >100°C/212°F or environmental temperature is above system operating range >40°C/104°F It is shown on the LCD with red LED.
	In object mode. Measured temperature is below measuring range of <0.0°C/32,0°F Or environmental temperature is below system operating range <5°C/41°F It is shown on the LCD with red LED.
	If low battery indicator appears, replace all batteries with new ones.
ERR	Thermometer sytem fails or affected by electric magnetic field.

Care and maintenance

Care for the main unit

• Keep the unit in the storage case when not in use.
• Clean the unit with a soft dry cloth. Do not use any abrasive or volatile cleaners.
• Never immerse the unit or any of its component in water.

Maintenance

Do not clean the unit with naphtha, thinner or gasoline etc.	Store the unit in a clean and dry location. Do not subject the unit to extreme hot or cold temperature, humidity and direct sunlight.
Remove the batteries if the unit will not be used in 3 months or longer.	Do not use the unit under the influence of electromagnetic interference (nearby cellphones, microwave etc.)

Note : We will not be responsible for any quality problem if you do not care and maintain the product as instructed.

Specification

Warranty information

The unit is guaranteed to be free of defects in work man ship and materials under normal use for a period of 1 year from the date of purchase.

For repair under this warranty. Our authorized service agent must be advised of the fault within the period of the warranty. This warranty only covers parts and labor service under normal operations. Any defect resulting from natural causes, eg. flood, hurricane etc, is not covered in this guarantee. This guarantee also does not cover damage incurred by use of the unit not in accordance with the instructions, accidental damage, or being tampered or serviced by unauthorized service agents.

The following will be excluded from this warranty-if the thermometer has been misused, abused, or neglect in following the manual’s instructions on purpose and unauthorized repair or modifications.
The device requires no calibration.
The device is not repairable and contains no user serviceable parts

ShenZhen Medek Bio-Medical Co.,Ltd.
ADD: No. 101 Wenhao Industrial Park No.13 Yuanxin Road Tongle Community, Baolong Street, Longgang District. 518116 Shenzhen P.R.China

Name:Shanghai International Holding Corp.GmbH(Europe)
Add: Eiffestrasse 80,20537 Hamburg,Germany

© copyright Edco Deutschland GmbH Siemensstr. 31 47533 Kleve
Deutschland. Made in P.R.C. www.grundigaccessories.com
® The Grundig trademark is used under license

www.grundigaccessories.com

AT A GLANCE

A Grundig Jam

1. Power on/off
2. Play/Pause
3. Volume Up
4. Volume Down
5. Bluetooth
6. Microphone
7. Led Indicator
8. AUX in
9. DC in
10. DC out

B USB Cable

GRUNDIG JAM SAFETY

Please note the following instructions:

• This device is designed for the playback of audio signals. Any other use is expressly prohibited.
• Make sure there is adequate ventilation when positioning the device.
  There must be a free space of at least 10 cm behind the device.
• Do not cover the device with newspapers, table cloths, curtains, etc.
• Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic, most of which contain chemical additives. These may cause corrosion to the feet of the device, thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove.
• If the device is exposed to sudden changes in temperature, for example when taken from the cold into a warm room, wait at least two hours before using it.
• The speaker is waterproof at depths of up to 1 m. according to IPX7. It can therefore be used in wet environments without any problem. Please note that all charging ports must be closed when the speaker comes into contact with water.
• Do not place any objects containing liquids (for example, vases) on the device.
• Do not place any objects such as burning candles on the device.
• Never open the device casing under any circumstances. No warranty claims are accepted for damage resulting from improper handling.
• Do not use any cleaning agent, as this may damage the casing. Clean the device with a clean, moist leather cloth.
• Attention should be drawn to environmental aspects of battery disposal.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.

Built-in Rechargeable Battery CAUTION:

• Risk of explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Compliance with the WEEE Directive and  Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used devices must be returned to official collection point or recycling of electrical and electronic devices. To find these collection systems please contact your local authorities or retailer where the product was purchased. Each household performs an important role in recovering and recycling old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive

The product you have purchased complies with the EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package Information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Technical Information

This device is noise-suppressed according to the applicable EU directives.
This product fulfills the European directives 2014/53/EU and 2011/65/EU.
You can find the CE declaration of conformity for the device in the form of a pdf file on the Grundig Homepage www.grundig.com/downloads/doc.
Output Power
RMS 3.5W, 1% THD
Bluetooth
Frequency Range 2.402 GHz-2.480GHz
Maximum transmitted power <5 dBm
Version 5.0
Firmware version 1.5
Hardware version 1.3
Open area operation range: 30m (BT); 20m (TWS)
Rechargeable Li-ion Battery
Build-in, 3.7V 2500 mAh, 9.25 Wh
Playback time: 30+ hours (50% volume)
Charge time 3-4 hours
Power Supply
USB Socket: Micro USB Charging DC IN 5V 1A
USB Socket: Power Bank DC OUT 5V 1A
Waterproof IPX7
Handsfree
AUX IN
Stereo 3.5 mm Jack
Frequency Response 100Hz-16kHz
Product Dimensions/Weight
97mm (W)x36 mm (D)x79 mm (H)
Net Weight: 0,24 kg
Accessory
Micro USB Cable (1)

55 Blanck Street, Ormeau Q 4208
P 0 Box 354, Ormeau Q 4208
p : 5549 3146 f : 5549 3546
ABN : 49 152 055 162
ORIGINAL MANUFACTURER’S WARRANTY ADVICE FROM
GRUNDIG BLUETOOTH SPEAKERS
12 months warranty, full parts, and labor warranty only
Congratulations on purchasing your new Grundig audio product. If you have any queries on the setup of your new product or would like some tips on how to get the best out of our product please visit the support section of our website grundig.com.au. We also recommend you register your new Grundig audio product. By registering we will be able to keep you up to date on your product, any new offers, and new products or relevant apps- just follow the links on our home page at grundig.com.au.

Grundig products come with a guarantee that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure. ‘Acceptable quality and ‘major failure’ have the same meaning as referred to in the Australian Consumer Law. This Grundig warranty is in addition to any other rights you may have under Australian Consumer Laws.
Grundig will repair or replace any part that becomes defective during the warranty period of 12 months after the original purchase of a new Grundig product at no extra charge. To be clear that means second-hand Grundig products are not covered by this warranty, and if a Grundig product is replaced the warranty period does not start over again.
The Grundig manufacturers warranty has the following conditions in order to make a claim:

1. Proof of purchase (typically your receipt).
2. Please contact Grundig Customer Care to request warranty support for your Grundig audio product. Grundig covers the expenses of labor and materials required for the repair or replacement of the product that is found to be defective, and a reasonable return shipping charge within Australia only. The original packaging should be retained; additional charges will be incurred for additional cartons/packaging.
3. Any product or part that is replaced by Grundig becomes Grundig’s property
4. Grundig may choose to use refurbished parts or supply a refurbished replacement (with similar specifications) at its sole discretion.
5. Component & consumable parts, the nature of which is to become worn or depleted with use (batteries, headphone earpads, or other accessories) are excluded.
6. Grundig products are designed for normal domestic/home use only.
7. If you incorrectly install, misuse, damage, neglect to maintain or clean your Grundig product in line with the user manual recommendations, then the damage caused by this is excluded
8. Damage caused by normal wear and tear, damage caused by accident, unreasonable use or neglect, vermin or insect infestation, or power surges, electrical storms, or incorrect power supplies are also excluded
9. If the Grundig product has been repaired or modified by an unauthorized person, or if the serial number has been removed, modified, or defaced, then the warranty is excluded
10. This Grundig manufacturer’s warranty only covers actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, setup or adjustments, claims based on misrepresentation by the seller, performance variations resulting from installation-related circumstances such as source quality or AC power or product modifications.

If you have a problem you can contact Grundig at: Grundig, 55 Blanck Street, Ormeau, Queensland 4208 telephone 1300 125 887 or email [email protected]. Make sure you have your Grundig model number, serial number, and proof of purchase to hand.

Beko Grundig Deutschland GmbH
Thomas-Edison-Platz 3
D-63263 Neu-Isenburg
www.grundig.com