AEA03 Truly Wireless Earbuds User Guide

For FAQs, detailed user manuals, and more information, please visit https://holyhigh.com or contact us via Email – .

Wearing: Choose the silicone eartips and wingtips that are most suitable for your ears.

Charging: Please tear off the protective films from earbuds first, and charge the charging case with a USB-C cable.

On/Off: If the charging case still has battery power, the earbuds will automatically turn on once you open the charging case and take them out of the case. If you need to turn off the earbuds, please put them back into the case correctly.
Note: The earbuds can be turned on manually by pressing and holding the touch buttons on earbuds for 2 seconds, or turned off manually by pressing and holding the buttons for 5 seconds in non-playing status.

Pairing: Open the charging case and take out the earbuds, the earbuds will automatically enter Bluetooth pairing mode. Select “HolyHigh AEA03” from the Bluetooth list of your device and click to connect.

Control:
x1: tap once
x2: double-tap
x3: triple-tap
2S: press and hold for 2 seconds
Notes:

1. In mono mode, press and hold L to skip to the next song.
2. In mono mode, volume adjustment is unavailable.

Reset :

1. If the earbuds cannot pair with other devices, please reset the earbuds. Delete “HolyHigh AEA03” from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status, triple-tap L/R and the LED indicator on the earbud flashes white light for 3 seconds then goes out. Put the earbuds into the charging case, and the earbuds have been reset successfully.
2. If the earbuds cannot pair with each other, please reset the earbuds. Delete “HolyHigh AEA03” from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and double-tap both earbuds simultaneously and the LED indicators on earbuds rapidly flash white light. Put the earbuds into the charging case, and the earbuds have been reset successfully.

Descriptions of LED Indicators:
: Red lights flash rapidly
: Flashing red lights
Ο: Red lights always on
•: Breathing white light
•: White light off

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This device complies with CAN ICES-3 (B)/NMB-3(B).
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• ­ Increase the separation between the equipment and receiver. ­
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Model: AEA03
FCC ID: 2ATWG-AEA03
Shenzhen Yuangu Technology Co., Ltd.

IC: 26891-AEA05 Made in China

ET6 Wireless Earbuds Bluetooth headphones
User Guide

Wireless Headphones ET6
User Guide

Package Accessories

• *HolyHigh Earbuds
• 1*Charging Case
• 1*Type-C Charging Cable
• 1*User Manual
• 4*Pairs of Ear Tips

Product Introduction

1. Multifunctional Button
2. LED Indicator of Earbud
3. Charging Pins on Earbud
4. Type-C Charging Port
5. LED Indicator of Charging Cas
6. Charging Pins on Charging Case

Usage Instructions

1. After you open the package for the first time use, please tear off the insulation film on the earbuds, then charge the earbuds and charging case via charging cable for at least 10 minutes; do not take out the earbuds during this period.
   
2. The earbuds are installed with a pair of medium-sized ear tips by default. Please select a suitable size for a secure fit.
3. How to pair
   a) Binaural mode instructions: Open the charging case and take out the earbuds or press and hold the Multifunctional Buttons (MFB) for 2 seconds in the power-off state to turn them on, the left and right earbuds will enter TWS pairing mode automatically.
   After the pairing is successful, the indicator of the main earbud will flash red and blue light alternately and the indicator of the secondary earbud will flash blue light every 3 seconds, and a voice prompt”Pairing” will follow from the main earbud. At this time, turn on the Bluetooth function of your phone, search”HolyHigh ET6″ and click to pair. After the pairing is successful, the earbuds will prompt you with”Connected”. When you take out the earbuds for use, the indicators of earbuds will go out.
   b) Mono mode instructions:
   Open the charging case and take out a single earbud or press and hold the MFB for 2 seconds in the power-off state to turn it on. At this time, please double click the MFB on the earbud, then a voice prompt”Pairing” will follow and the indicator of the earbud will flash red and blue light alternately. Turn on the Bluetooth function of your phone, search “HolyHigh ET6″ and click to pair. After the pairing is successful, the earbud will prompt you with”Connected”.
   Note: If you are using one earbud in mono mode but you need to switch to binaural mode, and the charging case still has battery power, please open the charging case and take out the other earbud for use.
4. How to reset
   1) Delete the pairing name”HolyHigh ET6″on your mobile phone and turn off the Bluetooth function.
   2) Turn off the earbuds then press and hold the MFB for 7 seconds in power-off state, release the MFB after the red and blue LED indicators rapidly flash three times at the same time, then let the earbuds stay still for 5 seconds.
   3) Put the earbuds back into the charging case and close the charging case.
   4) Take out the earbuds from the charging case and they enter pairing mode. That means the earbuds have been reset successfully. 5) If the reset fails, please repeat the above steps.
5. How to control

Product parameters

7. LED indicator

FAQ

1. The charging case still has battery power, but why the earbuds can not be charged?
   A. For the first time use, please confirm whether the insulation film of the earbuds is removed or not.
   B. Please confirm that the earbuds are correctly placed in the charging case. Otherwise, the earbuds can not be charged if the charging pins of the earbuds and charging case don’t contact fully.
   C. Wipe the pins (golden part) of the earbuds and the charging case with a clean cotton cloth to ensure that there are no foreign objects.
2. Why is there jamming when using the earbuds? Due to the characteristics of Bluetooth earbuds, the electromagnetic wave interference in the area may cause temporary jamming.
3. Can the left and right earbuds be connected separately to two different devices? No.

AFTER-SALE SERVICE
Our customer service is friendly and hassle-free, please contact us if you need our help as follows:
– Technical Support
– The package is Not in Perfect Condition.
– Orders beyond the deadline of the Amazon Return
Window are also accepted.
Email: [email protected]

EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

http://qr31.cn/AwW0LN	http://qr31.cn/EG4DLP

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Truly Wireless Earphones
User Guide

For FAQs, detailed user manuals, and more information, please visit https://holyhigh.com or contact us via Email – [email protected].

Wearing: Choose the silicone eartips and wingtips that are most suitable for your ears.

Charging: Please tear off the protective films from earbuds first, and charge the charging case with a USB-C cable.

On/Off: Open the charging case, the earbuds will automatically turn on. If you need to turn them off, please put them back into the charging case and close the case.

Pairing: Open the charging case, the earbuds will automatically enter Bluetooth pairing mode. Select “HolyHigh AEA04” from the Bluetooth list of your device and click to connect.

Control:
x1: tap once 2S: press and hold for 2 seconds
x2: double-tap 3S: press and hold for 3 seconds
x3: triple-tap  10S: press and hold for 10 seconds
Notes:

1. In mono mode, press and hold L to skip to the next song.
2. In mono mode, volume adjustment is unavailable.
3. In mono mode, triple-tap L/R to activate the voice assistant.

Forced Pairing Mode: Pair with other devices: put the earbuds into the charging case and keep the cover open, press and hold the button on the case for 3 seconds until the LED indicators of the earbuds quickly flash white light 3 times then go out At this time, the earbuds enter pairing mode

Reset: If the earbuds cannot pair with each other or with other devices, please reset the earbuds. Put the earbuds into the charging case and keep the cover open, press and hold the button on the case for 10 seconds until the LED indicators of the earbuds flash red and white light alternately 3 times then go out. At this time, close the charging case. This indicates that the earbuds have been reset successfully and can be connected normally

Descriptions of LED Indicators:
: Flashing white light
: White light always on
: White light off

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
FCC ID: $354;

Model: X3
FCC ID: 2APROQ-X3
Shenzhen Winnershine Electronics Co., Ltd

IC: 26891-AEA05
Made in China