SoundPods™

READ INSTRUCTIONS BEFORE

USE OF SoundPods™

KEEP FOR FUTURE REFERENCE

Introduction:

1.  Multi-Function Button
2. Earbud LED Indicator
3. Volume & Track Control
4. Charging Button
5.  Charging Dock Indicators LED

Important information

• Both earbuds will automatically pair to each other when turned on. When Successfully paired, one of the two earbuds will flash red and blue while another will slowly flash blue.
• The earbuds will power off if they don’t connect to any device within 5 minutes.

Pairing your earbuds

1. Turn on the Bluetooth on your device.
2. Long press the multi-function button for 3 seconds to power SoundPods on. When the Earbud LED Indicators flash red and blue, they are ready to be paired.
3. Choose “SoundPods’ on your list to connect.
4. When the Earbud LED Indicators slowly flash blue, they are successfully paired.

Bluetooth usage:

1 . Making phone calls: Be sure the earbuds are connected with your mobile phone. Once connected you can make phone calls. When making calls both earbuds will be working.

• To answer a call(, short press the earbud Multi-function button one time.
• To end a call short press the earbud Multi-function button one time.
• To reject calls long-press the earbud Multi-function button.
• You can dial the last number by quick pressing the earbud Multi-function button twice.

2. Listening to music: Be sure the earbuds are connected with your mobile phone.

• To pante/resume music, short press the earbud Multi-function button one time.
• To play next track, short press the earbud volume +” button.
• To play the previous track short press the earbud volume –” button.
• To increase the volume long-press the earbud volume “+” button.
• To decrease the volume long-press the earbud volume ‘-” button.

3. Power off Long press the earbud Multi-function button for 5 seconds to power off the earbud. The Earbud LED indicator will flash red 3 times indicating that the earbud has been powered off.
The earbuds will power off if they don’t connect to any device within 5 minutes.

Charging your device

1. Charging your earbud(s):

• There will be a tone sound to Indicate the earbuds need to be charged.
• Place earbuds onto charging dock and press the charging button to begin a charge.
• The earbud(s) LED Indicator will turn red while charging and will turn off when fully charged.

1. Charging your dock:

• While charging the dock, the LED Indicators will flash red and will change to a solid red when fully charged.

Specifications:

Bluetooth version: V5.0 Earbud Battery Capacity: 60mah each Charging Dock Battery Capacity: 400mah Play Time: Up to 21hrs

Features:

• Auto Connect Technology
• Built-in Microphone
• Up to 21hrs of play and charge time
• Connect wirelessly to iOS & Android devices
• Ergonomic design for a comfortable fit in your ear

Attention:

1. Handle with care. Do not throw, sit on, or store the SoundPods under heavy objects. Keep away from high temperatures and environments with high humidity. Store in an environment with a temperature between -10°C – 60°C.
2. Keep away from high-frequency transmitting equipment such as WIFI routers which may cause sound interference or disconnection.
3. This product is compatible with both JOS° and Android” devices.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

© 2020 Zelkos, Inc. Hip is a trademark of Zeikos, Inc., Pod, (Phone and Pad are trademarks of Apple Inc. The “Android* name, the Android logo, and other trademarks are property of Google LLC. , Registered In the U.S. and other countries. The illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade names are those of their respective owners. The United States and international patent pending. All Rights Reserved. For ages 12+up. This is not a toy. Designed by iHip, Manufactured in China. The Bluetooth0 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ‘Hip’ is under license. Other trademarks and trade names are those of their respective owners.
Limited One Time Warranty. To activate your product warranty go to our website. www.iHip.com & register this product.

19 Progress St Edison, NJ 08820 www.1111p.com

#Hip	Find us on Facebook. Keyword: iHip: Portable Entertainment

FDJAMBAR
Bluetooth® Speaker
INSTRUCTION MANUAL

PLEASE READ ALL INSTRUCTIONS CAREFULLY
& RETAIN FOR FUTURE USE

Getting Started

• Remove the unit from the box.
• Remove any packaging from the product.
• Please retain all packaging until you have checked and counted all the parts and the contents against the parts list.

Package Contents

• JAMBAR Speaker
• USB Charging & 3 5mm auxiliary 2 in 1 cable
• Instruction manual

IMPORTANT SAFETY INFORMATION

1. Read all instructions before using this product.
2. Do not leave this product unattended while connected to the power supply.
3. Do not immerse in water or any other liquids.
4. Do not use if unit has been dropped or damaged in any way.
5. Repairs to electrical equipment should only be performed by qualified personnel. Improper repairs may place user at serious risk
6. Place unit on sound, even surface, free of vibrations and away from sources of heat.
7. Do not use with wet hands.
8. Do not put objects into openings.
9. Keep free of dust, lint, hair etc.
10. Do not use this unit for anything other than its intended use.
11. Keep this product out of reach of children.
12. This product is not a toy.
13. Do not play music at excessive levels especially near children, as damage to hearing may occur.

DESCRIPTION OF PARTS

INSTRUCTIONS FOR USE

Charging the speaker

For best results, fully charge the speaker before use.

1. Connect the USB cord (included) to the charging port of the speaker and insert the other end into a port on your computer or similar suitable power source.
2. The Red LED turns on, indicating that the battery is being charged. Once it is fully charged, the Red LED will turn off. It takes about 2-3 hours to charge the speaker fully.

* Do not use this product when it’s charging.

Turn On/Off the Speaker

1. To Turn “ON”, slide the”ON/OFF” switch to the ON Position.
2. To Turn “OFF; slide the”ON/OFF”switch to the OFF Position.

Pairing your device with Bluetooth Speaker
Your Bluetooth Speaker can wirelessly stream audio from any Bluetooth-enabled device within 30 Feet. Simply follow the below steps.

1. Turn ON the speaker.
2. You would hear the indication tone.
   The speaker is now in pairing mode.
3. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer.
4. It will search for various devices.
5. The pairing name of our Bluetooth Speaker is”JAMBAR”, pair it with this device.
6. If required, enter the password’0000’to confirm to finalize pairing.
7. Once paired successfully, you would hear an indication tone.
8. If you fail to pair it within the time frame or you want to pair it with a new device please follows the steps outlined above.

Select your favorite song at the Bluetooth device and music would now stream through Bluetooth speaker.
(Note: Speaker will automatically pair with previously paired devices)

Talking using the Bluetooth Speaker
Please ensure that your cell phone is paired with the Bluetooth Speaker to use the below functions.

Listening to Music Wirelessly

Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the Bluetooth Speaker to stream music wirelessly. Once it is paired, play music from your device.

Aux function of the Speaker (to play musk from non-Bluetooth devices)

1. Turn on the speaker, and short press M button (3) to switch into AUX input mode.
2. Plug the 2 in 1 cable (included) which the side is charging cord into the Charging port (7) of the speaker. And, connect the other end of the cable (3.5mm auxiliary cord) to the audio device (such as MP3 Players/computer/tablet etc.).
3. Select your favorite song at the source device.

Note: Once AUX cable is connected to the Speaker, music through the Bluetooth will be stopped.

Listening to Music using USB /TF Card Slot

1. Turn on the speaker.
2. Insert TF card or USB flash drive into the TF Card Slot or USB Slot. Music would be automatically streamed.
3. Short press + or – button to move forward or backward on your playlist.
4. Short press iHip button to Play or Pause a track.

Note: While using Bluetooth, if you insertTF Card or USB Flash drive, the speaker would disconnect the Bluetooth connection and switch to TF card or USB card function. You can short press Mode button each time until it goes back Bluetooth mode.
TF Card/USB Flash Drive not included.

FM Radio

1. Turn ON the Speaker.
2. Insert the charging cable into Micro port, leave the other end of the cord open. The charging cable serves as FM Antenna.
3. Short press Mode button each time until FM mode is selected.
4. Short press iHip button (4) and the device would automatically search and store all the FM Radio stations.
5. Short press + or- button to change the FM Radio stations.

1. When the unit is not in use, turn OFF the device to save the battery power.

Do’s and Don’ts

Do not play music at excessive levels as damage to hearing and/or equipment may result.
Do not use in wet or in damp surroundings.

Specification

• Bluetooth Version : 5.0
• Speaker Output: 2x3W
• Frequency Response : 190Hz – 10KHz
• Playing Time: 2 hours
• Charging Voltage: DC 5V
• Bluetooth Range: 30 Feet
• Battery: 400mAh Rechargeable Battery

(Note: Battery life & charging time may vary based on usage & types of devices used.)

Troubleshooting

Care and Maintenance
Clean the unit with a soft, damp cloth. Never use chemicals or hard abrasives. Keep this unit away from wet or damp surroundings.

The crossed-out wheelie bin symbol on this item indicates that this product needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out. Contact your local authorities for details of where to take the item for recycling.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

© 2021 Zeikos, Inc. iHip is a trademark of Zeikos, Inc. iPod, iPhone, and iPad are trademarks of Apple Inc., Registered in the U.S. and other countries. The illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade names are those of their respective owners. United States and international patent pending. All Rights Reserved. For ages 12+up. This is not a toy. Designed by iHip, Manufactured in China.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by “iHip” is under license. Other trademarks and trade names are those of their respective owners.

Limited 1 Year Warranty.
Customer service: 1-800-500-4434
To activate your product warranty go to our website
www.ihip.com & register this product.

19 Progress St Edison, NJ 08820
www.iHip.com

Find us on Facebook.
Keyword: iHip: Portable
Entertainment

iHip 13783453 Sound Pods Wireless Earbuds

Introduction:

1.  Dust Net
2.  Muttl-Functlon Button
3.  LED Indicator
4. Charging Port

Important information

• The earbud(s) wlll automatically power on when taken out from the charging case.
•  Both earbuds will automatlcalty pair to each other when turned on.
•  The earbuds will power off if they don’t connect to any device within 5 minutes. If the earbuds turn off, turn the earbud(s) on again by:
  •  putting the earbuds back Into the charging case and then take it out to power on.
  •  manually turn It on by long pressing the multi-function (D button on the earbuds.

1.  Charging your case
   1. Plug USB In cable the charging Included. case using the Micro
   2. While the case battery Is charg ng, the case LED Indicator w111 t>e flashing ired.
   3.  When the case Is fl.Illy charged, the light then will change to solid red.

Charging your earbuds:
• Place the earbuds Inside of the charged case. The earbuds will automatically start charging once placed In the charged case.
• A solid Aed lighl on the earbuds will indicate that the earbuds are charging.
• A solid blue light on the earbuds will indicate that the earbuds are fully charged.

NOTE: The earbuds and case can be charged simultaneous y, but the earbuds will not charge if there is lno power in the case. The case needs to have at least a minimum charge to charge the earbuds.

Pairing your earbuds

1. Turn on the Bluetooth on your device
2. Choose “SOUNOPOOS” on yoor list to connect

When the LEO slowly flashes blue, they are  paired successfully iThere will be a reminding voice saying “your headset Is connected”

Bluetooth usage:

1. Making phone c:alls:
   Be sure the earbuds are connected w th your mobile phone. Once connected you can make phone calls. When making calls both earbuds wilt be working.
   1.  To. short press the earbud Mulll-function button one time.
   2. To   long-press the earbud Mullllunctlon button two seconds.
   3.  When the earbuds are In music mode, you can Dalai tho function by quickly pressing the earbud Multi-function button twice.
2. Listening to music:
   Be sure the earbuds are connected with your mobile phone. You can listen to music on your music Hsi. Short press the earbud Multl-function OUtton to stop the music; to replay press again.
3.  Power off:
   Long press the earbud Multl-function button until the LED red l ght is no longer red, then the Bluetooth device iIs turned off.The earbuds turn off automatically when earbuds are away from Bluetooth device for a duration of over 5 minutes.
4.  Low battery
   When the battery s low, there will be a reminding voice Isaying “Battery Low

Specifications:

• B1uetooth verslon:V5.1
• Bluetooth range: 1 O meters
• Bluelooth frequency: 2.4GHz
• Battery Capacity: Earbuds: 30mAh rechargeable LI-Ion battery Charging dock: 400mAh rechargeable Li-Ion battery

Features:

•  Built-In microphone
•  High-quality sound with extra bass
•  Up to 18hrs of play and charge time
•  Connect wlrelessty to 10S &Android devices
• ErQonom c design for a comfortable fit 1n your  ear

Stereo earbuds with wireless connection. I Lett and right channel separation, HIFI sound. Dual band Bluetooth connection allows you to I use the SoundPods together or individually.

Attention:

1.  Handle with care. Do not throw, s t on, or store the SoundPods under heavy iobjects. Keep away lrom high temperatures and environments with high humidity. Store In an environment with a temperature between •10″C – 60″C.
2.  Keep away from high frequency transm tting equipment such as WIFI routers which may i cause sound interference or disconnection.
3.  Please keep the earbuds within a 1 Om (33 ft) range of the connected device.
4.  This product Is a compatible with both IOS and Android devices.

FCC Statement:

This equipment has been tested and found to a company with the limits for e Class B digital device, pursuant l to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful Interference In a
residential generates, Isesnstallatand on. can This rad ate equipment rad frequency energy and, If not Installed and used i in accordance with the Instructions, may cause harmful interference to rad o communications. However, I there is no guarantee i that Interference will not occur In a particular Installation. II this equipment does cause i harmful interference to rad o or television reception, wh ch can be determined by turning the equipment i off and on, the user preferences Is by encouraged e or to more try of to the correct lowing the in

• Reorient Increase or the relocate separation the receive between ing the antenna.
• Connect the equipment Into an outlet on a circuit d internet from that to which the receiver is connected.
• Consult the dea er or an experienced radio/TV technician for help. l

Introduction

1. Earbuds
2. Earbuds LED indicator
3. On/Off button
4. Charging case LED indicator
5. Charging case
6. Multi-function Button.

Pairing your earbuds

1. Take your earbuds out of the Charging Case [5]
   The earbuds will automatically turn on and enter into pairing mode and the earbuds LED /ights[2] will alternately flash between red and blue.
2. On your device, go to your Bluetooth settings.
3. Turn your device Bluetooth function on.
4. Choose “SoundPods” from your list of devices.
   After the pairing is successful, the earbuds LED will flash blue.
   ENJOY!!

Turn on/off

To turn your earbuds ON:

• The Earbuds will automatically turned ON once taken out of the charging case.
• If the earbud is off press the Multi-function [6] button for 3 seconds to turn it ON.

To turn your earbuds OFF:

• The Earbuds will automatically turned OFF once placed back in the charging case.
• If the earbud is on press the Multi-function [6] button for 3 seconds to turn it OFF.

For the following functions use the Multi-function [6] button on the earbuds.

Calls Functions

Short press to answer a call.
Short press to hang up if you’re in a call.
Long press (1.5 seconds) to refuse a call.
Double click to redial the last call (dialed or unanswered).

Listening to music Functions
Short press to Pause.
Long press for the next song.

• To charge your Earbuds [1]:
  Place the earbuds in the Charging Case [5J.
  The earbuds LED lights[2] will turn red when the earbuds are charging.
  The earbuds LED lights[2] will turn blue once the earbuds are fully charged.
  When one of the earbuds has a low battery level, the lower battery tone will be issued every 30 seconds.
• To charge your Charging Case [5J :
  Plug in the charging case using the micro
  USB charging cable included.
  The Charging Case is fully charged when the LED indicator[4] has 4 lights.

Specifications

• Bluetooth version: V5.0
• Earbuds Battery Capacity: 40mAh each
• Charging Case Capacity: 300mAh
• Play Time: Up to 16hrs
• Earbuds Charging Time: About 1.5hrs
• Charging Case Time: 2hrs
• Charging Port: Micro USB

Package Includes

• 1 – Pair of SoundPods Earbuds
• 1 – Charging Dock
• 1- Charging Cable
• 1 – User Manual

Attention:

1. Handle with care. Do not throw, sit on, or store the SoundPods under heavy objects. Keep away from high temperatures and environments with high humidity. Store in an environment with a temperature between -1 0°C ~ 60°C.
2. Keep away from high frequency transmitting equipment such as WIFI routers which may cause sound interference or disconnection.
3. Please keep the earbuds within a I Om (33 ft) range of the connected device.
4. This product is a compatible with both iOS® and Android™ devices.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1 5 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general
RF exposure requirement. The device can be used in portable exposure condition without restriction.

© 2020 Zeikos, Inc. iHip is a trademark of Zeikos, Inc., iPod,
iPhone and iPad are trademarks of Apple Inc., The “Android” name, the Android logo, and other trademarks are property of Google LLC. , Registered in the U.S. and other countries. The illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade names are those of their respective owners. United States and international patent pending. All Rights Reserved. For ages 12+up. This is not a toy. Designed by iHip, Manufactured in China.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by “iHip” is under license. Other trademarks and trade names are those of their respective owners.

Limited One Time Warranty.
To activate your product warranty go to our website.
www.iHip.com & register this product.

	19 Progress St Edison, NJ 08820 www.iHip.com
	#iHip
	Find us on Facebook. Keyword: iHip: Portable Entertainment