logitech MK850 Wireless Keyboard

BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure batteries are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54°C (130°F). A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. Class 1 Laser product: This product complies with International Standards IEC/EN 60825-1: 2014, Class 1 Laser Product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Maximum power of 716 microwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C.
WARNING! Use of controls, adjustments or performance of procedures beyond those specified herein may result in hazardous radiation exposure.
WARNING! Laser Radiation. Viewing the laser output with magnifying optical instruments within a 100mm distance may pose an eye hazard.
WARNING! Avoid prolonged direct eye and/or skin contact with the laser aperture. May result in potential burn injury.
The product contains Class 1 LED. Operating temperature between 0° C and 40° C. Class 1M Laser product: This device complies with International Standard IEC/EN 60825-1:2014, Class 1M Laser Product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Emission of diverging beam of minimum +/-2° of infrared user-invisible light; Maximum power of 1.4 milliwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C.

Use Guidelines: Safe & Proper Use of Your Product

•  Do not open or modify the product except for battery removal and replacement.
• Do not disassemble or attempt to service this product because there is a risk of radiation exposure, which could injury you.
• Do not direct the infrared/laser beam at anyone’s eye or a reflective object.
• Do not immerse product in any liquid or expose to heat or moisture.
• If product is exposed to out-of-range temperature environments, power off the device until temperature has stabilized within the specified operating temperature range.
• Use only Logitech-provided power supply devices with this product. Do not modify the power supply. Do not charge your product during an electrical storm.
• Use the product with listed/certified ITE computers and accessories.
• This is not a Children’s Product and is not intended for use by children under 14 years old.
•  Long periods of repetitive motion using the product may be associated with nerve, tendon or muscle injury in your hands, wrists, arms, shoulders, neck or back. See a qualified health professional for pain, numbness, weakness, swelling, burning, cramping, or stiffness. Also, read guidelines at www.logitech.com/comfort.
• This product is safe under normal and reasonably foreseeable misuse operating conditions. If the product is operating improperly, contact Logitech support. Product must be returned to Logitech for any service or repair.
• Any changes or modifications to the product that are not expressly approved by Logitech may void the user’s authority to operate the equipment and your warranty.
• Refer to product Quick Start Guide for use instructions.
• This product complies with relevant legal requirements for Restriction of Hazardous Substances (RoHS) and management of waste electronic and electrical equipment (WEEE) in the EU, Turkey, Ukraine, United Arab Emirates, India, China and Taiwan. For RoHS and WEEE information, go to www.logitech.com/compliance. Batteries, electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase, or visit www.logitech. com/recycling.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modifications to product not expressly approved by Logitech, Inc could void your right to use or operate your product by the FCC.
IC statement : CAN ICES-3 (B) / NMB-3 (B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation
of the device.

Radiation Exposure Statement
This wireless product complies with the FCC and Industry Canada RF exposure limit for portable devices.
Logitech Limited Hardware Product Warranty – A Summary
Logitech warrants that its hardware product shall be free from defects in materials and workmanship for the length of time identified on your product package beginning from the date of the original retail purchase. See support. logitech.com for specific warranty information about your product and procedures to act on a warranty claim.
Logitech’s entire liability and your exclusive remedy for any breach of warranty shall be, at Logitech’s option, to repair or replace a functional equivalent of the product, or to refund the price paid, if the hardware is returned to the point of purchase or such other place as Logitech may direct along with a receipt. Warranty protections are in addition to rights provided under local consumer laws and may vary among countries. See full warranty information to know your consumer rights and the additional protections provided by this product warranty.
Logitech Address: Logitech, Inc., 7700 Gateway Blvd. Newark, California 94560.
Full Warranty Information: support.logitech.com
For Australia/New Zealand Consumers Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided by Logitech International SA, EPFL – Innovation Park, Daniel Borel Innovation Center, 1015 Lausanne, Switzerland.
Contact information for Australia/New Zealand Consumers Only:
The Woolstores Alexandria, Shed 72, Suite 2.01A, 4F Huntley Street, Alexandria, Sydney, NSW Australia 2015. Telephone: 1 800-025-544. For any product /warranty -related questions, please contact Customer Care (www. logitech.com/contact).
Contact information for Asia Pacific Consumers: Logitech Asia Pacific Limited, Unit 1003, Tower One, Cheung Sha Wan Plaza, 833 Cheung Sha Wan Road, Kowloon, Hong Kong.

FAQ’S

Is it possible to use the keyboard with a Mac?

Yes, the keyboard is compatible with Mac.

How do I connect the keyboard to my PC?

The keyboard connects via a wireless USB dongle. This can be plugged into any USB port on your PC.

Can I use this keyboard with multiple devices?

Yes, you can use this keyboard with up to 3 devices at once. You will need to install the Logitech Unifying Software for this functionality.

What is the battery life of this device?

A: The battery life of this device is 3 years, so you won’t have to worry about charging it very often.

Does the Logitech MK850 have backlit keys?

Logitech MK850 Performance is a versatile kit for business users who use multiple computers and devices on their desks. It has all the features you would expect, including the option to work with up to three PCs or devices simultaneously. The only important missing feature is the backlight for the keyboard.

Why is my Logitech keyboard not connecting?

Turn the keyboard off and then back on again. Make sure the batteries in the keyboard aren’t worn out. Press the connect or reset button on your USB receiver if it has one. Press the connect or reset button on your keyboard if it has one.

Why is my wireless keyboard not typing?

Check all of the cables are plugged in: obvious, but try it. Replace the batteries in the keyboard and/or mouse. Reconnect the devices by pressing the reconnect button on the wireless receiver, and on the keyboard and mouse.

What does blinking light on Logitech keyboard mean?

The fast blinking means it is in pairing mode. Go to your bluetooth settings and click to add a device. Pick your mouse (and keyboard if needed) and it will re-pair.

Is Logitech MK850 silent?

The Logitech MK850’s padded palm rest makes life easier on your wrists. The keys themselves boast good travel and a soft, whisper-quiet touch, but not much in the way of snap.

How do I connect my keyboard to multiple devices?

First, there is a cable called a KVM switch, which is short for “keyboard, video and mouse” switch. These let you share one mouse, keyboard and monitor between two computers. There are also KM switch cables that allow you to share just a keyboard and mouse with two computers that have two separate monitors.

How do I reset my wireless keyboard?

Reset your wireless keyboard
Turn off your keyboard.
With the keyboard turned off, hold down the ESC key.
While holding down the ESC key, turn on your keyboard.
After about 5 seconds, release the ESC key. You will see the keyboard lighting flash if the reset is successful.

How do I get my keyboard back to normal?

To get your keyboard back to normal mode, all you have to do is press the ctrl and shift keys at the same time. Press the quotation mark key if you want to see whether or not it’s back to normal. If it is still acting up, you can shift again. After this process, you should be back to normal.

WHAT’S IN THE BOX

FEATURES

HEADSET BUTTON LAYOUT

1. Wireless On/Off switch
2. G3 (programmable): Default equalizer (EQ) cycle
   • Will cycle through EQ settings in Logitech G HUB software
3. G2 (programmable): Default surround sound on/off
4. G1 (programmable): Lighting cycle
   • Will cycle through lighting settings in Logitech G HUB Software, including breathing, solid cyan, custom, and off
5. Microphone mute
6. Volume wheel

G1, G2, and G3 are programmable using the Logitech G HUB Software (in PC mode only): www.logitech.com/support/g935
Note: Buttons and volume wheel only operate in Wireless On mode. Some buttons and features may require PC connection and Logitech G HUB Software.

BATTERY MANAGEMENT

G935 wireless headset is powered via a battery housed in the right earcup. When you are not using your G935 wireless headset, plug it in via the USB port n the bottom of the unit to charge. When fully depleted, the battery takes approximately 3.5 hours to reach full charge on standard USB output. For the optimal experience, plug in your unit and allow it to charge fully before first use.

Critical Battery Warning
G935 gaming headset will play a tone at a low charge. The headset’s lighting will also dim when at a low charge. At the critical charge level, the unit will play a tone and the lighting will turn off. Use a USB charging cable to plug in the headset immediately if you hear these tones to ensure uninterrupted listening or gaming.

Logitech G HUB Software
The home screen in Logitech G HUB Software has a battery charge level indicator:
When using the battery, this will indicate the charge level
This indicates the unit is charging

IDLE SLEEP MODE

G935 will go into sleep mode to conserve battery power when it has not received an audio signal in 15 minutes.
In idle sleep mode, the unit’s lighting will change to the breathing mode, and it will disconnect from the USB wireless adapter. Your G935 will wake up from sleep mode if you press a button on the headset.
After 30 minutes in sleep mode, your headset will fully power off in order to conserve your battery. In order to wake up your headset, you will need to move the power switch to the off position and then back to the on position. If you plan to leave your headset idle for an extended period of time, turn off your headset and plug it in via USB to charge.

ON/OFF TONES AND LIGHTS

When your headset is turned on, it will play a tone to indicate that your headset has turned on. The lights will perform a power-on light cycle sequence, then switch to the currently selected lighting. When the unit is turned off, lights will switch to blue and fade out while it powers down.

WIRELESS ON/OFF

G935 has two operation modes, Wireless On, and Wireless Off.
Wireless On
In Wireless On mode, most headset features are available, 1 including custom sound profiles, RGB lighting, microphone, mic mute, wireless, and audio mixing. When the battery charge is low, lighting will dim and a low battery notification tone will play. When the battery charge level is critical, the lighting will turn off.
Wireless range²
Indoor: 15 meters
Battery life³
No lighting: 12 hours
Default lighting: 8 hours

1. Some features may require Logitech G HUB Software.
2. Range may vary with environmental conditions.
3. Rechargeable batteries have a limited number of charge cycles. Battery life was measured at 50% volume.

Wireless Off (passive mode)

In Wireless Off (passive mode), your headset will operate in passive unpowered mode. Your headset will play audio from any device connected through the 3.5mm input on the headset.
Features that require power, including 7.1 surround sound, custom sound profiles, on-headset buttons, volume wheel operation, and button/lighting customization functions are not available in this mode.
Boom mic is not available for devices connected through the on-headset 3.5mm audio port in this mode.
This mode can be used to preserve battery life.

SETUP FOR PC (PC MODE)

1. Download and install Logitech G HUB: www.logitech.com/support/g935
2. Set switch to Wireless On position.
3. Connect USB Wireless Adapter to PC.
   The headset will automatically connect.

Mixing audio sources

While connected via a USB Wireless Adapter, the G935 can also use the 3.5mm cable to connect to another audio source (ex. smartphone). Both audio sources can be played simultaneously.

SETUP FOR PC (3.5MM CONNECTION)

SETUP FOR PC (3.5MM CONNECTION)
The G935 can also connect to audio devices solely via a 3.5mm cable.

1. Set switch to Wireless Off mode for passive audio mode, or set to  Wireless On mode for active audio mode with additional features (see “Wireless On/Off” section).
2. Connect to PC using the 3.5mm cable

Some features, including 7.1 surround sound, on-headset buttons, volume wheel operation, and customization of lighting and button functions are not available without the USB connection. The boom mic is not available for 3.5mm devices while in Wireless Off mode.
Some PCs may require a 3.5mm 4-pole to mic/stereo splitter adapter (not included) to use microphone features in this mode.

SETUP FOR MOBILE

1. Set switch to Wireless Off mode for passive audio mode, or set to Wireless On mode for active audio mode with additional features (see “Wireless On/Off” section).
2. Connect the headset to the mobile device via the 3.5mm cable. The boom microphone is only available in Wireless On mode.

SETUP FOR CONSOLE: XBOX ONE™, PS4™ OR SWITCH™

1. Set switch to Wireless Off mode for passive audio mode, or set to  Wireless On mode for active audio mode with additional features (see “Wireless On/Off” section).
2. Connect the headset to the console controller using the 3.5mm cable.
   • Xbox One may require Xbox One headset adapter (sold separately).

PlayStation setup (settings)

1. Connect the headset
2. Open Settings
3. Select “Sound and Screen”
4. Select “Audio Output Settings”
5. Set “Output to Headphones” to “All Audio”

The headset will not operate via USB  Wireless Mix Adapter on Xbox One. The boom microphone is only available in Wireless On mode.

ALTERNATE SETUP FOR SONY PLAYSTATION® 4 & NINTENDO SWITCH™

Wireless operation

1. Set switch to Wireless On position.
2. Connect the headset to the console using the USB Wireless Adapter.

Note: Some buttons and functions may not operate when connected to the PlayStation 4. Programming of lighting and buttons is not possible on the  PlayStation. 7.1 surround sound is not available while connected to PlayStation.

Nintendo Switch setup (settings)

1. Set Switch to Wireless On position
2. Connect the USB Wireless Adapter to the USB port inside the Switch TV Dock
3. The audio output will change to your headset automatically

PlayStation setup (settings)

1. Plugin headset via USB or 3.5mm cables
2. Open Settings
3. Select “Sound and Screen”
4. Select “Audio Output Settings”
5. Set “Output to Headphones” to “All Audio”

RGB LIGHTING ZONE CUSTOMIZATION

• Zone 1: G logo
• Zone 2: Lighting strip

Each lighting zone can be programmed with the Logitech G HUB (PC mode only). www.logitech.com/support/g935

TAG CUSTOMIZATION

The left and right custom tags can be removed and replaced with custom tags.

LOGITECH G HUB SOFTWARE

G-key buttons, lighting, equalizer, and surround sound profile programming is possible through the Logitech G HUB Software.

1. LIGHTSYNC Lighting
2. Assignments
3. Acoustics
4. Equalizer

COLOR/EQUALIZER CYCLING

G1 and G3 buttons are pre-programmed by default to cycle through lighting and equalizer profiles.
When the headset is connected to a system with Logitech G HUB software running, it will cycle through all equalizer or lighting options programmed into Logitech G HUB Software.
When the headset is not connected to a system with Logitech G HUB software running, it will cycle through the custom lighting or equalizer profiles stored in the headset’s onboard memory. These profiles can be programmed via Logitech G HUB Software

PAIRING INSTRUCTIONS

If your device becomes unpaired or you receive a replacement USB Wireless Adapter, follow these instructions to pair your device with the USB Wireless Adapter:

1. Plug-in USB Wireless Adapter
2. Insert the pin into the reset port on adapter to initiate pairing mode
3. The light on the adapter will blink
4. Turn on the headset
5. Hold the “Microphone mute” button for 15 seconds to initiate pairing mode
6. Headset G logo will blink green to indicate pairing mode
7. The logo will turn to a solid color and then return to the currently selected lighting when paired

EARPAD CLEANING

1. Removal
2. Washing
   a. Once removed, the earpads can be wiped clean with a damp cloth. Do not use detergent.
   b. Press with a soft towel to dry, do not wring.
   c. Allow to air dry before reattaching.
3. Replacement

© 2018 Logitech, Logi, and the Logitech Logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
WEB-621-001181.002

www.logitech.com/support/k800

WHAT’S IN THE BOX

SET UP

logitech.com/options

KEYBOARD FEATURES

1. Application zone
   Fn+ F1 Launch Internet browser
   Fn+ F2 Launch e-mail application
   Fn+ F3 Launch Search
   Fn+ F4 Flip
2. Convenience zone
   Fn+ F5 Backlight down by 25%
   Fn+ F6 Backlight up by 25%
   Fn+ F7 Battery check
   Fn+ F8 Sleep mode
3. Multimedia navigation zone
   Fn+ F9 Launch media
   Fn+ F10 Previous track
   Fn+ F11 Play/Pause
   Fn+ F12 Next track
4. Multimedia volume zone Mute
   Volume down
   Volume up
   Calculator
5. Fn key
6. Automatic light sensor (ALS)
7. Battery status indicator
8. Keyboard power switch.

RECHARGING

Recharging the keyboard
Typically, you can expect about 10 days of battery life before you will need to recharge the keyboard battery.* If the backlighting level is set to 100%, you have about 15 hours of battery life.
To recharge the keyboard, connect it to your computer using the USB recharging cable. A full battery recharge takes about 5 hours and only 3 hours if the keyboard has been switched off.
Battery life varies with usage, backlighting level, and computing conditions. Heavy usage usually results in shorter battery life.

UNIFYING

Logitech® Unifying technology connects up to six compatible Logitech mice and keyboards to the same receiver, using only one USB port for multiple devices.
To learn more, visit: www.logitech.com/support/unifying

TROUBLESHOOTING

Keyboard not working?

1. Slide the keyboard’s Off/On switch to Off and then On. The keyboard’s battery status indicator LEDs should light up.
2. Confirm that the keyboard is charged. The battery status indicator is red when the battery is low.
3. Try plugging the Unifying receiver into another USB port.
4. Move the Unifying receiver closer to the keyboard.
5. Try reconnecting the keyboard and Unifying receiver using the Logitech Unifying software (see the Unifying section).
6. Restart the computer.

BATTERY REMOVAL INFORMATION

1. Remove 1 screw and battery door.
2. Remove bottom panel.
3. Remove 17 screws.
4. Remove top case.
5. Remove 6 screws.
6. Remove keyframe, light guide panel and metal plate.
7. Remove tape, then disconnect the battery cables from the main circuit board, remove battery from the bottom case.
8. Dispose of the battery and product according to local laws.

© 2020 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

Specs & Details

Dimensions

Keyboard

• Width: 19.17 in (487 mm)
• Height: 7.68 in (195 mm)
• Depth: 1.06 in (27 mm)
• Weight (without batteries): 26.46 oz (750 g)

USB Receiver

• Width: 0.57 in (14.4 mm)
• Height: 0.74 in (18.7 mm)
• Depth: 0.24 in (6.1 mm)
• Weight: 0.06 oz (1.8 g)

3-year limited hardware warranty

• 920-002359

• WARNING: Proposition 65 Warning

FAQ – Frequently Asked Questions

My NumPad/KeyPad is not working, what should I do?

– Make sure that the NumLock key is enabled. If pressing the key once doesn’t enable NumLock, press and hold the key for five seconds.

– Verify that the correct keyboard layout is selected in Windows Settings and that the layout matches your keyboard.
– Try enabling and disabling other toggle keys such as Caps Lock, Scroll Lock, and Insert while checking if the number keys work on different apps or programs.
– Disable Turn on Mouse Keys:
1. Open the Ease of Access Center — click the Start key, then click Control Panel > Ease of Access and then Ease of Access Center.
2. Click Make the mouse easier to use.
3. Under Control the mouse with the keyboard, uncheck Turn on Mouse Keys.
– Disable Sticky Keys, Toggle Keys & Filter Keys:
1. Open the Ease of Access Center — click the Start key, then click Control Panel > Ease of Access and then Ease of Access Center.
2. Click Make the keyboard easier to use.
3. Under Make it easier to type, make sure all checkboxes are unchecked.
Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch, or something similar.
– Make sure the keyboard drivers are updated. Click here to learn how to do this in Windows.
– Try using the device with a new or different user profile.
– Test to see if the mouse/keyboard or receiver on a different computer.

External keyboard shortcuts for iPadOS

You can view the available keyboard shortcuts for your external keyboard. Press and hold the Command key on your keyboard to display the shortcuts.

Change modifer keys of external keyboard on iPadOS

You can change the position of your modifier keys at any time. Here’s how:
– Go to Settings > General > Keyboard > Hardware keyboard > Modifier Keys.

Toggle between multiple languages on iPadOS with an external keyboard

If you have more than one keyboard language on your iPad, you can move from one to the other using your external keyboard. Here’s how:
– Press Shift + Control + Space bar.
– Repeat the combination to move between each language.

Warning message when Logitech device is connected to iPadOS

When you connect your Logitech device, you might see a warning message.
If this happens, make sure to connect only the devices you’ll be using. The more devices that are connected, the more interference you might have between them.
If you are having connectivity issues, disconnect any Bluetooth accessories that you’re not using. To disconnect a device:
– In Settings > Bluetooth, tap the information button next to the device name, then tap Disconnect.

Cleaning your Logitech device

In the event your Logitech device needs cleaning we have some recommendations:

Before You Clean
– If your device is cabled, please unplug your device from your computer first.
– If your device has user-replaceable batteries, please remove the batteries.
Be sure to switch off your device and then wait 5-10 seconds before starting to clean.
– Don’t put cleaning liquids directly on your device.
– For devices that are not waterproof, please keep moisture to a minimum and avoid any liquid dripping or seeping into the device
– When using cleaning sprays, spray the cloth and wipe — do not spray the device directly. Never submerge the device in a liquid, cleaning or otherwise.
– Don’t use bleach, acetone/nail polish remover, strong solvents, or abrasives.

Cleaning Keyboards
– To clean the keys, use regular tap water to lightly moisten a soft, lint-free cloth and gently wipe down the keys.
– Use compressed air to remove any loose debris and dust between the keys. If you do not have compressed air available, you could also use cold-air from a hair-dryer.
– You can also use fragrance-free disinfecting wipes, fragrance-free anti-bacterial wet wipes, makeup removing tissue, or alcohol swabs containing less than 25% concentration of alcohol.
– Don’t use bleach, acetone/nail polish remover, strong solvents, or abrasives.

Cleaning Mice or Presentation Devices
– Use tap water to lightly moisten a soft, lint-free cloth and gently wipe down the device.
– Use lens cleaner to lightly moisten a soft, lint-free cloth and gently wipe down your device.
– You can also use fragrance-free disinfecting wipes, fragrance-free anti-bacterial wet wipes, makeup removing tissue, or alcohol swabs containing less than 25% concentration of alcohol.
– Don’t use bleach, acetone/nail polish remover, strong solvents, or abrasives.

Cleaning Headsets
– Plastic parts (headband, mic boom, etc.): it is recommended to use fragrance-free disinfecting wipes, fragrance-free anti-bacterial wet wipes, makeup-removing tissue, or alcohol swabs containing less than 25% concentration of alcohol.
– Leatherette earpads: it is recommended to use fragrance-free disinfecting wipes, fragrance-free anti-bacterial wet wipes, or make-up removal tissue. Alcohol wipes can be used on a limited basis.
– For the braided cable: it is recommended to use anti-bacterial wet wipes. When wiping cables and cords, grip the cord mid-way and pull towards the product. Don’t forcefully pull the cable away from the product or away from the computer.
– Don’t use bleach, acetone/nail polish remover, strong solvents, or abrasives.

Cleaning Webcams
– Use tap water to lightly moisten a soft, lint-free cloth and gently wipe down the device.
– Use lens cleaner to lightly moisten a soft, lint-free cloth and gently wipe down the webcam lens.
– Don’t use bleach, acetone/nail polish remover, strong solvents, or abrasives.

If Your Device Still Isn’t Clean
– In most cases, you can use isopropyl alcohol (rubbing alcohol) or fragrance-free anti-bacterial wipes and apply more pressure when cleaning. Before using rubbing alcohol or wipes, we suggest you test it first in an inconspicuous area to make sure it doesn’t cause discoloration or remove any printing on your device.
– If you’re still not able to get your device clean, please consider contacting us.

COVID-19
Logitech encourages users to properly sanitize their products in accordance with guidelines put out by the World Health Organization and the Centers for Disease Control guidelines.

Wireless product not working properly when also using a USB 3.0 device

When using a USB 2.0 2.4GHz wireless peripheral device (such as a mouse, keyboard, or headphones) with a PC that also has a USB 3.0 peripheral device plugged in, you may experience erratic operation caused by interference. This is especially likely to happen when using USB 3.0 remote hard drives or flash drives.

This interference may result in:
– Delayed response to mouse or keyboard inputs
– Missing keyboard characters or mouse commands
– Decreased operating distance between the USB 2.0 wireless device and its receiver

There are some techniques that can help early adopters of USB 3.0 to mitigate potential problems with their existing 2.4GHz wireless devices:

– If your PC has multiple USB 2.0 connectors available, separate your USB 3.0 and USB 2.0 receivers by as much distance as possible. For example, if your PC has a choice of USB 2.0 connectors, use the one on the opposite side of the PC from the USB 3.0 connector.
– Position your USB 2.0 receiver as close as possible to your wireless peripheral (mouse, keyboard, headphones, etc.).
– Use a standard, USB-extender cable to position your USB 2.0 wireless receiver as far away as possible from your USB 3.0 connector.

A USB-extender cable is available for Logitech customers who are experiencing this problem (click here for more information).

NOTE:  A USB 3.0 connector sometimes referred to as Super Speed USB or SS, normally has a blue plastic insert in the connector. Unlike a USB 2.0 connector which has 4 pins within the connector, a USB 3.0 connector has 9 pins.

Move your USB 2.0 wireless receiver to the opposite side of your computer:

Make sure your USB 2.0 wireless receiver is in the USB 2.0 connector closest to your wireless peripheral:

Use a USB extended cable to position your wireless receiver as far away from your USB 3.0 peripheral as possible:

Windows 8 and Windows 10 product support and device compatibility

To check if your Logitech product works with Windows 8 or Windows 10, first select the appropriate product category from the list below.
– Mice and keyboards
– Tablet and laptop accessories
– Gaming products
– Harmony remotes
– Speakers
– Headphones and headsets
– Smart radios
– Squeezebox network music players
– Alert security cameras
– WiLife security cameras
– Webcams

US, US International and United Kingdom keyboard layouts

See the following for generic English-language keyboard layouts:
– US
– US International
– United Kingdom
—————————-
US

US International 

United Kingdom 

My Unifying mouse or keyboard wakes the computer even when it is set not to

Symptom
After disabling the ability to wake-up the system in Windows Device Manager, the Unifying mouse or keyboard still brings the system out of sleep mode.

Solution
Even if you bought a mouse-only or keyboard-only product, the Unifying receiver that came with it still enumerates for both the mouse and keyboard interfaces.

Example
If you have two mice attached, then you would need to uncheck the “Allow this device to wake the computer” option for both mice plus a keyboard in the Windows Device Manager.
Use the process below to identify and configure the Unifying devices to not wake up the system in Windows Device Manager.

Changing wake-up settings in the Device Manager
To change the wake-up settings in Windows Device Manager, you’ll need to launch it through Computer Management and then make your selections. Here’s how:
1. Click Start, right-click Computer, and then click Manage.
2. Click Device Manager in the navigation pane on the left.

3. Select and expand either the “Keyboards” or “Mice and other pointing devices” category.
4. Right-click on the first entry and go to Properties > Details tab > Hardware IDs under the Property section.
5. Make sure the Value section contains: HIDVID_046D&PID_C52B. If it doesn’t, click Cancel and open the next mouse or keyboard entry in the list.

6. Select the “Power Management” tab and uncheck the “Allow this device to wake the computer” check box.

7. Repeat the same steps for all entries in both the “Keyboards” and “Mice and other pointing devices” categories.

Customizing my K800 keyboard with Logitech SetPoint Software

This tutorial shows you how to use these features in the Logitech SetPoint Mouse and Keyboard Software:
– Customizing programmable keys
– Programming function keys
– Checking battery status
– Disabling keys
– Using the Unifying Software
– Keyboard illumination settings

Customizing programmable keys:
To assign keystrokes to one key or change key assignments:
1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).
NOTE:  If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.
2. Click the My Keyboard tab at the top of the SetPoint Settings window.
NOTE:  If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down-arrow icon next to the current product name and select Wireless Illuminated Keyboard K800 from the drop-down menu that displays.
3. Choose the hot key you want to customize in the Select Hot Key field,
NOTE:  If the Hot Key Settings screen isn’t showing, click the lightning-bolt.icon on the left toolbar to display it.

4. Choose the task you want to assign from the Select Task list,
NOTE:  You can click the “?” icon next to Hot Key Settings at the top for detailed descriptions of these options.

5. Click Apply to save your settings and then OK to close SetPoint.

Programming function keys
The function keys, also known as F-keys, are the keys labeled F1 through F12 above the number keys on your K800. Like the programmable keys, these keys can also be programmed to perform certain functions.
NOTE:  To use a function key, press the FN key (to the right of the spacebar and Alt key) at the same time as the function key you want to program.

To program a function key:
1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).
NOTE:  If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.
2. Click the My Keyboard tab at the top of the SetPoint Settings window.
NOTE:  If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down-arrow icon next to the current product name and select Wireless Illuminated Keyboard K800 from the drop-down menu that displays.
3. Click the “F” icon on the left toolbar to display the F Key Settings screen
4. In the Select F Key field, choose the function key you want to customize.
NOTE:  The pictures in the list match those shown above the numbers on the function keys. For example: My Home is F1.

5. Choose the task you want to assign to the chosen function key from the Select Task list.
NOTE:  You can click the “?” icon by F Key Settings at the top for detailed descriptions of these options

6. Click Apply to save your settings and then OK to close SetPoint.
If you prefer, you can make these programmed functions happen without having to hold down the FN key when you press an F-key. (Instead, you’ll have to hold down the FN key for the default F-key functions.) To make this change, select the Swap F key functions check box shown above

Checking battery status
To check the battery status of your keyboard:
1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).
NOTE:  If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.
2. Click the My Keyboard tab at the top of the SetPoint Settings window.
NOTE:  If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down-arrow icon next to the current product name and select Wireless Illuminated Keyboard K800 from the drop-down menu that displays.
3. Click the battery icon on the left toolbar to display the Keyboard Batteries screen and check your battery status.
4. Click OK to exit SetPoint.

Disabling keys
To disable keys you don’t use:
1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).
NOTE:  If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.
2. Click the My Keyboard tab at the top of the SetPoint Settings window.
NOTE:  If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down-arrow icon next to the current product name and select Wireless Illuminated Keyboard K800 from the drop-down menu that displays.
3. Click the disabling icon on the left toolbar to display the Keyboard Inactive Keys screen.
4. Select the checkbox next to any key you want to disable.
NOTE:  You can click the “?” icon next to Keyboard Inactive Keys at the top for detailed descriptions of these options.
5. Click Apply to save your settings and then OK to exit SetPoint.

Using the Unifying Software
Your K800 ships with Logitech Unifying Software. This lets you use up to six compatible Logitech products with a single Unifying USB Receiver. With the Unifying software you can:
– Pair and un-pair Unifying devices
– Update software and firmware
– Create report logs

To launch the Unifying software:
1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).
NOTE:  If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.
2. Click the My Keyboard tab at the top of the SetPoint Settings window.
NOTE:  If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down-arrow icon next to the current product name and select Wireless Illuminated Keyboard K800 from the drop-down menu that displays.
3. Click the Unifying icon on the left toolbar to display the Unifying tab.
4. Click the Open Unifying Software button to launch the software.

To pair your Unifying receiver with more than one Unifying device. follow the on-screen instructions given in the Logitech Unifying Software window. To use the other features of the Unifying software, click the Advanced button.

Keyboard illumination settings
To change the keyboard illumination settings:
1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).
NOTE:  If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.
2. Click the My Keyboard tab at the top of the SetPoint Settings window.
NOTE:  If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down-arrow icon next to the current product name and select Wireless Illuminated Keyboard K800 from the drop-down menu that displays.
3. Click the light-bulb icon on the left toolbar to display the Keyboard Illumination Settings screen.
4. Select your settings and then click Apply to save them.

NOTE:  You can click the “?” icon at the top for detailed descriptions of these settings.
5. Click OK to exit SetPoint.

My K800 hotkeys do not work as programmed

To verify your keyboard hot key assignments:
1. Launch SetPoint (Start > Programs > Logitech > Mouse and Keyboard > Mouse and Keyboard Settings).
NOTE:  If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.
2. Click the My Keyboard tab at the top of the SetPoint Settings window.
NOTE:  If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down-arrow icon next to the current product name and select Wireless Illuminated Keyboard K800 from the drop-down menu that displays

3. Choose the key you want to customize in the Select Hot Key field

4. Choose the task you want to assign from the Select Task list.
NOTE:  You can click the “?” icon next to Hot Key Settings at the top for detailed descriptions of these options.

5. Click Apply to save your settings and then OK to close SetPoint.

My K800 cannot be customized using Logitech software (SetPoint)

Normally, you should be able to customize your K800 settings in the Logitech SetPoint Mouse and Keyboard Software using the My Keyboard tab. If this tab isn’t displayed, you’ll need to re-install SetPoint.

NOTE:  Your keyboard will display in SetPoint as Wireless Illuminated Keyboard K800. If you have more than one Logitech keyboard and the K800 isn’t currently displayed, click the down arrow next to the current product name and select the K800 from the drop-down menu that displays.
SetPoint with My Keyboard Tab

SetPoint without My Keyboard Tab

To uninstall SetPoint:
– Windows XP
– Windows Vista and Windows 7

Windows XP:

1. Go to Add or Remove Programs.
– Start menu view: Start > Control Panel > Add/Remove Programs
– Classic start menu view: Start > Settings >Control Panel > Add/Remove Programs
2. Select Logitech SetPoint from the list of programs displayed.
3. Click the Change / Remove button and follow the on-screen instructions to uninstall SetPoint.
4. Download and install the latest version of SetPoint from the K800 Downloads Page.
NOTE: You may need to reboot your system after SetPoint has been installed.
5. After your system restarts, open SetPoint to verify that the My Keyboard tab is available.

If the My Keyboard tab is still missing:
1. Exit SetPoint by right-clicking on the SetPoint icon in the system tray at the bottom right corner of your screen next to the clock.

2. Select Exit.
3. Click the Windows Start button.
4. Choose Run.
5. Type %windir% in the Run dialog box.

6. Double-click the System32 folder to open it.
7. Double-click the drivers folder.
8. Rename the file wdf01000.sys to wdf01000.bak.
9. Re-install SetPoint.WARNING:
10. Before you reboot, check to make sure the wdf01000.sys file is present in the drivers folders. If you reboot without this file, it may prevent some of your hardware — including mice and keyboards — from working properly.
11. If the wdf01000.sys file is not present, change wdf01000.bak back to wdf01000.sys.
12. Reboot the computer.
13. After your system restarts, open SetPoint to verify that the My Keyboard tab is present.

Windows Vista and Windows 7

1. Go to Uninstall a program.
– Start menu view: Start > Control Panel > Uninstall a program
– Classic start menu view: Start > Settings >Control Panel > Programs and Features
2. Select Logitech SetPoint from the list of programs displayed.
3. Click the Uninstall button highlighted above and follow the on-screen instructions to uninstall SetPoint.
4. Download and install the latest version of SetPoint from the K800 Downloads Page.
NOTE:  You may need to reboot your system after SetPoint has been installed.
After your system restarts, open SetPoint to make sure the My Keyboard tab is available.

Additional information:
If you’re still having the same issue, see Knowledge Base article 18009 for how to contact Logitech Technical Support.

My K800 keyboard is not working

This issue is most likely a lost connection. The connection between the keyboard and USB receiver can be lost for several reasons, including:

– Low battery charge
– Moving the USB receiver from one USB port to another
– Moving the USB receiver to another computer
– Plugging the USB receiver into a USB hub, KVM switch or other unsupported device (NOTE: Your USB receiver must be plugged directly into your computer.)
– Using your wireless keyboard on metal surfaces
– Radio frequency (RF) interference from other sources, such as:

– Wireless speakers
– Computer power supplies
– Monitors
– Cell phones
– Garage door openers

Try to rule out any of these problem sources that might be affecting your keyboard before you reconnect it.

Before reconnecting your K800
Before you connect your K800 again:
1. Make sure the batteries in your K800 are fully charged.
2. Make sure your keyboard is turned on. For instructions on how to turn your keyboard on and off, see answer null.
3. Make sure the USB receiver is securely plugged directly into a working USB port on your computer.
4. Turn your computer on.

Follow the process below to reconnect your keyboard
Reconnecting your K800
To reconnect your K800:
1. Download and install the correct version of the Logitech SetPoint mouse and keyboard software from the K800 Downloads page.
2. Launch the Logitech Unifying Software (which was included in SetPoint) from Start > Programs > Logitech > Unifying > Logitech Unifying Software.
3. When the Logitech Unifying Software Welcome screen shown below displays, click Next to continue.

4. Follow the on-screen instructions to turn your K800 off and then back on.
When your K800 is detected, you’ll see this confirmation message:

5. Type a test message in the text field to verify the keyboard is working.
6. Once you’ve confirmed the keyboard is working, choose “Yes” and then click Next to continue.
7. Click Finish to exit the Logitech Unifying Software. Your K800 should now be connected.

Turning my K800 KEYBOARD on and off

To turn your K800 Keyboard on:
1. Locate the ON/OFF switch at the top right-side of your keyboard.
2. Slide the switch from “OFF” to “ON”.
NOTE:  The switch will have a green background showing on the left side and one or more of the battery indicator lights will be lit to the left of the switch, depending on your current battery level.
To turn your K800 Keyboard off:
1. Locate the ON/OFF switch at the top right-side of your keyboard.
2. Slide the switch from “ON” to “OFF”.
NOTE:  The switch will have a red background showing on the right side and none of the battery indicator lights will be lit to the left of the switch

K800 Num Lock and Caps Lock indicators

Caps Lock indicators
On the K800 Keyboard itself, you can determine if Caps Lock is on by checking the green indicator light in the top left corner of the Caps Lock button. If it is lit, Caps Lock is on and all of the letters you type will appear in uppercase.

You can also determine if your K800 has Caps Lock on through the on-screen notification.
NOTE:   You need to have Logitech SetPoint software installed in order to receive on-screen notifications. If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.

To determine on-screen if your K800 has Caps Lock on:
Caps Lock On. When you press the Caps Lock button and see the following “Caps Lock On” message, all of the letters you type will appear in uppercase.
Caps Lock Off. When you press the Caps Lock button and see the following “Caps Lock Off” message, unless you use the Shift button, all of the letters you type will appear in lowercase.

Num Lock indicator
With your K800 Keyboard, you can determine if Num Lock is on through the on-screen notification.
NOTE: You need to have Logitech SetPoint software installed in order to receive on-screen notifications. If you don’t have SetPoint installed, you can download it from the K800 Downloads Page.

To determine on-screen if Num Lock is on:
Num Lock On. When you press the Num Lock key at the top left of the keypad and see the following “Num Lock On” message, using the keypad enters numbers.
Num Lock Off. When you press the Num Lock key above and to the left of your keypad and see the following “Num Lock Off” message, the numbered keys on the keypad act as direction keys moving your cursor in the direction of the arrows printed on them.

Using the FN and F1-F12 keys on my K800

Your K800 Keyboard’s function keys, or F-keys, have two modes:
– Normal. By default, the function keys perform tasks based on the operating system and application you’re using. To use a function key in its normal state, you press it by itself.
– Enhanced. The function keys are pre-programmed to perform certain tasks when you press them at the same time as the FN key (shown below). For example: Press and hold the FN key (A) and the F1 key (B) to launch your internet browser.

Using the Logitech SetPoint Mouse and Keyboard Software, you can change the pre-programmed function for each key. You can also swap the modes so the enhanced functions work without having to press the FN key. See the “Programming function keys” section of answer null for instructions.

The enhanced functions are listed below:
Key : Function
1. Application zone
F1 Launch internet browser
F2 Launch email application
F3 Launch Windows Search*
F4 Application switcher*
2. Convenience zone
F5 Reduce backlight by 25%
F6 Increase backlight by 25%
F7 Battery check
F8 Sleep mode
3. Multimedia navigation zone
F9 Launch media player
F10 Previous track
F11 Play/Pause
F12 Next track
4. Multimedia volume zone
Mute
Volume down
Volume up
Calculator
Additional features
5. FN key
6. Automatic light sensor (ALS)
7. Battery status indicator
8. Keyboard power switch
*Requires SetPoint

Connecting a second Unifying device to my Unifying receiver

Your K800 Unifying USB receiver can be connected to up to six Unifying Logitech mice and keyboards. You can tell if your devices are Unifying because they will have this logo:

connect additional Unifying devices to your Unifying USB receiver:
1. Download Logitech SetPoint Mouse and Keyboard Software, if you don’t already have it installed. You can download SetPoint from the K800 Downloads Page.
2. Launch the Logitech Unifying Software (Start > Programs > Logitech > Unifying > Logitech Unifying Software).
3. On the Welcome window that displays, click Next:
For the Unifying software to detect your device, you’ll need to turn it on. Follow the on-screen instructions (shown below) to turn your device off and then back on.
4. When your device is detected, you’ll see a confirmation message as shown below. 5. Type a test message in the text field to make sure the keyboard works.
NOTE:  If the keyboard doesn’t work right away, wait a minute to see if it connects. 6. If it doesn’t, select No and then click Next to restart the pairing process from Step 1 above.
7. Select Yes and then click Next.
8. Click Finish to exit the Logitech Unifying Software. Your device should now be connected.

K800 compatibility with KVM switches and hubs

Manufacturers implement keyboard and mouse support in various, non-standard ways. KVM switches may affect the functionality of your K800.
Other third party devices that may interfere with communication between your K800 and your computer are:
– KVM switch boxes
– Port Replicators
– Docking Stations
– USB Hubs

My K800’s backlight stays on

Normally, your K800’s backlight will turn off after 10 to 15 seconds, or whenever you’ve set it to go off.

Sometimes though, the keyboard may stay lit longer. This often happens when the keyboard is moved to a different location on your desk or to another desk entirely.

The reason for this is that the keyboard has a built-in system to detect your hands. When moved, it can take some time for the keyboard to perform this detection again.

Allow 3-5 minutes for your keyboard to go through its detection cycle. Then, the backlight should begin to switch off again in the amount of time expected.

K800 operating distance

In ideal situations, the K800 can operate up to 30 feet (10 meters) with the receiver in clear sight of the keyboard and mouse.

If you are not getting this distance:
– Replace the batteries with a fresh set.
– Move devices such as cell phones, radios, wireless routers, microwaves, and other devices that emit radio waves or could cause radio interference (RF) away from your work area.

To determine if your environment is causing shorter than expected ranges, try using your K800 in a different environment to see if the distance improves.

My K800 frequently loses connection

If you have to constantly reconnect your keyboard or your mouse, try the following:
– Keep other electrical devices at least 8 inches (20 cm) away from the USB Unifying receiver.
– Move the mouse or keyboard closer to the USB Unifying receiver.
– Move the USB Unifying receiver to different locations.

Additional Information
The connection between the K800 keyboard and the USB Unifying receiver can be lost due to several reasons such as:
– Low batteries
– Moving the USB Unifying receiver from one USB port to another
– Moving the USB Unifying receiver to another computer
– Plugging the USB Unifying receiver into a USB hub or other unsupported device such as a KVM switch (your USB Unifying receiver must be plugged directly into your computer).
– Using your wireless mouse/keyboard on metal surfaces

Radio frequency (RF) interference of more powerful wireless devices such as:
– Wireless speakers
– Computer power supplies
– Monitors
– Cellular telephones
– Garage door openers
– If the above solutions do not resolve your problem, consult Knowledge Base article 18009 for instructions on contacting Logitech Technical Support.

Supported operating systems for my K800

Your K800 is supported by:
– Windows 7
– Windows XP
– Windows Vista

The K800 is not supported on Windows 98, Windows ME, Windows 2000, UNIX, Linux or Macintosh operating systems.

K800 battery life information

Battery information
Requires 2 AA NiMh batteries.
– Expected battery life is 15 hours to 10 days depending on backlight settings.
– Your keyboard has a standby mode to conserve power when not in use.

NOTE:  The batteries aren’t user replaceable.

Using my K800 with a different USB receiver

Your K800 ships with the new Logitech Unifying USB receiver as shown below:

You can only connect your K800 with Unifying USB receivers that display the Unifying logo .
NOTE:  Although the device may be supported by the Unifying receiver, SetPoint and/or Logitech Control Center (LCC) support will depend on the specific product.

Num Lock disabled after Windows 10 starts

By default, the Num Lock on your keyboard is disabled each time Windows 10 boots up after a shutdown or restart.

To configure your operating system so that Num Lock stays on during startup, please contact professional support for your operating system. This requires advanced changes that need to be done under the guidance of a professional technician.

logitech M150 Wireless Mouse

IN THE BOX

INSTALLATION

Keyboard features

Hotkeys

1. Mute
2. Volume Down
3. Volume Up
4. Print screen
5. Pause break
6. Context menu
7. Scroll lock

Mouse features

1. Left button
2. Scroll wheel
3. Right button

Help with setup:

The keyboard and mouse are not working

• Check the orientation of the batteries inside the keyboard and mouse, or replace the batteries.
• Is the USB receiver securely plugged into a computer USB port? Try moving the USB receiver to a USB port closer to the keyboard and mouse.
• If the USB receiver is plugged into a USB hub, try plugging it directly into your computer.
• Remove any metal object between the receiver and the keyboard/mouse that may interfere with reception. Try using the mouse on a different surface.
• Restart the computer.
• If these suggestions don’t work, download the Reconnection Utility from http://www.logitech.com/connect_utility.

What do you think?
Please take a minute to tell us. Thank you for purchasing our product. www.logitech.com/ithink

SPECIFICATION

FAQS

How can I maximize my use of the Logitech M150 Wireless Mouse?

With this comprehensive user guide, customers can maximize their use of the Logitech M150 Wireless Mouse.

Where can I provide feedback on my experience with the Logitech M150 Wireless Mouse?

Customers who have purchased the Logitech M150 Wireless Mouse are encouraged to provide feedback on their experience by visiting the Logitech website.

What should I do if my keyboard and mouse are not working?

Check the orientation of the batteries inside the keyboard and mouse, or replace the batteries. Ensure that the USB receiver is securely plugged into a computer USB port. Try moving the USB receiver to a USB port closer to the keyboard and mouse. If the USB receiver is plugged into a USB hub, try plugging it directly into your computer. Remove any metal object between the receiver and the keyboard/mouse that may interfere with reception. Try using the mouse on a different surface. Restart the computer. If these suggestions don’t work, download the Reconnection Utility from http://www.logitech.com/connect_utility.

What are the features of the mouse?

The features of the mouse include left and right buttons, a scroll wheel, and more.

What are the hotkeys on the keyboard?

The hotkeys on the keyboard include mute, volume control, print screen, pause break, context menu, and scroll lock.

What comes in the box with the Logitech M150 Wireless Mouse?

The Logitech M150 Wireless Mouse comes with a keyboard and a USB receiver.

Logitech G920 Driving Force Racing Wheel and Floor Pedals, Real Force Feedback

Specifications

• HARDWARE PLATFORM: Desktop
• BRAND: Logitech G
• COLOR: Black
• OPERATING SYSTEM: Microsoft Windows
• SERIES: ‎MAIN-10672
• HARDWARE PLATFORM: ‎Desktop
• ITEM WEIGHT: ‎4.96 pounds
• ITEM DIMENSIONS LxWxH: 10.24 x 10.94 x 10.63 inches,
• BATTERIES: ‎1 Lithium Metal battery

Introduction

Compatible with Xbox One, Xbox 360, and PC – Driving Force is a controller for the hottest racing games on your Xbox One or Xbox Series X console. When you add driving force to your controller options, you might never want to race with a standard controller again. G920 driving force pro is also compatible with several PC games.

Realistic force feedback – The G920 driving force is equipped with dual-motor force feedback, which is meant to accurately imitate the sensation of your car and tyres on every bend and kind of terrain, allowing you to detect under- and oversteer, drifting, and more. You get extraordinarily smooth, quiet, and precise steering action with helical gears designed after the gearing used in automotive transmissions. Anti-backlash tensioning helps you maintain control by keeping the wheel and pedals tight. Lock-to-lock rotation is 900 degrees. Steering sensor with Hall-effect

Accurate Racing

Driving force is built for accurate racing and long-term dependability, with solid steel ball bearings in the wheel shaft and stainless steel paddle shifters and pedals. The wheel is coated in high-quality, hand-stitched leather, giving it the look and feel of a high-performance racecar wheel while also providing a more pleasant, long-lasting ride. Driving power can be securely mounted to a table or racing rig with built-in clamps and bolt points to reduce shifting and wobbling during aggressive manoeuvres. The D-Pad and console buttons are ideally situated on the steering wheel for easy access to racing functions, and the semi-automatic paddle shifters aid in smooth, accurate gear transfers on hairpin corners and straightaways. Nylon mounting clamps with glass fill

The G920 comes with a separate floor pedal unit that allows for a more realistic driving stance, allowing you to easily brake, accelerate, and change gears as you would in a real automobile. For a more immediate and accurate braking sensation, the nonlinear brake pedal simulates the operation of pressure-sensitive brake systems. Pedals: 167 millimetre (6.57 inches), 428.5 millimetre (16.87 inches), 311 millimetre (12.24 inches); Wheel: 270 millimetre (10.63 inches), 260 millimetre (10.24 inches), 278 millimetre (10.24 inches); (10.94 inches)

WHAT’s IN THE BOX

1. Racing wheel
2. Pedal unit
3. Power adapter
4. User documentation

Installation

Attach power adapter and USB cables as shown.

Every time your Racing Wheel connects with your system, it will rotate fully to each side and then to the center to calibrate. Your wheel will be ready once this calibration is completed.

MOUNTING CLAMPS

G920 Driving Force Racing Wheel is equipped with a built-in clamping system for mounting to a table. Push down and rotate clamp knobs to lock or unlock. Rotate clamp knobs to tighten or loosen clamps.

NOTE: Clamp extenders should be removed for attachment to thicker tables.

BUTTONS

1. Left bumper
2. Directional pad
3. View button
4. Left stick button
5. Right bumper
6. A, B, X, Y buttons
7. Menu button
8. Right stick button
9. Xbox button

CONNECTIONS AND MOUNT POINTS

1. Mounting clamps
2. Cable management cleat
3. Optional shifter connection (DB-9 male)
4. USB cable
5. Pedal unit connection (DB-9 female)
6. Power connection
7. Bolt mounting points (uses M6X1 bolts)

OPTIMAL CABLE ROUTING

• USB and pedal cables (1, 2) should be routed through inner channels.
• Power and optional shifter cables (3, 4) should be routed through outer channels.
• Cables may be wrapped multiple times around cable management cleat to take in slack.

FORCE FEEDBACK

Your Racing Wheel contains dual motors that will provide force feedback with supported games and systems.

NOTE: Your Racing Wheel has an overheat protection circuit safeguard to protect it under high-temperature operating conditions. In rare instances, force feedback features may shut down during use while controls continue to operate. If this occurs, allow the wheel to cool down and power it down by unplugging it. If this occurs frequently, contact product support.

PEDAL UNIT

CLUTCH PEDAL

1. Brake pedal
2. Throttle pedal
3. Textured heel rest
4. Bolt mounting points (uses M6X1 bolts)
5. Patented carpet grip system
6. Carpet grip release clip Push towards rear or pedal unit to release
7. Change pedal face position (requires 2.5mm hex key)

FAQs

Is there a paddle shifter on the Logitech G920?
The G920 base setup, which comprises the wheel and pedals, is included in the standard box. You can even get a manual shifter to go with it for a little more. It’s not necessary because you have the paddle shift on the wheel, but it’s there if you like something more traditional.

My Logitech steering wheel is turning on its own.
If it’s navigating around turns on its own, it’s most likely in the game’s steer assist settings. The forza games will assist you in turning the car, which will turn the wheel. … You can change the settings in the game or on your computer by downloading the Logitech app.

 What are paddle shifters used for?
Paddle shifters allow you to change gear while still holding the steering wheel, eliminating the need to move your hand to the gear lever. This makes the change safer and faster. You can upshift or downshift the transmission while driving by clicking the paddle shifter.

What shifters are compatible with the G920?
To enhance the latest PC and console racing games, the Driving Force Shifter is intended for the G923, G29 (for PlayStation® and PC), and G920 (for Xbox and PC) racing wheels.

What’s wrong with my Logitech steering wheel?
Try reconnecting the steering wheel and pedal power supplies. This procedure will allow your computer to refresh the resources it needs to function with Logitech controllers properly. Disconnect the steering wheel from the computer and power source to do so.

What is the best way to set up my Logitech gaming wheel?
The following is an example of how to set up a Logitech G27 racing wheel on a computer:

• Run the driver application.
• Select New under Profile.
• Fill in the blanks with the game you want to play.
• Select Edit > Specific Game Settings from the menu.
• Click OK after configuring your racing wheel according to the screenshot below.

Do I need drivers for my Logitech G920?
Because Windows instals applications in the background, logitech G920 drivers windows 10 are not always required. However, if you have another operating system, you can get free Logitech driving drivers from our website. Run the Logitech G920 driver after downloading it.

Is force feedback available on the Logitech G920?
Dual motors on the G29 and G920 racing wheels give force feedback on supported games and systems.

What is the meaning of dual motor force feedback?
Every tyre slide and terrain change is felt thanks to dual-motor force feedback. Weight and endurance are provided by solid steel ball bearings in the wheel shaft. Precision force is applied by stainless steel paddle shifters and floor pedals. Every automobile is luxurious with a hand-stitched leather wrapped wheel.

What’s going on with my Logitech G920?
Your Strength is excessive, which is why the wheel moves on its own. Try these settings from my G29 days: Click to enlarge

LOGITECH Bolt USB Receiver

General Info & How-Tos

Compatible operating systems with Logi Bolt wireless products

All Logi Bolt wireless mice and keyboards come with two wireless connection options:
– Connect via paired Logi Bolt USB receiver.
NOTE: Not all Logi Bolt compatible mice and keyboards come with a Logi Bolt USB receiver.
– Connect directly to computer via BluetoothⓇ Low Energy wireless technology.

(1) The device’s basic functions will be supported without additional drivers in Chrome OS and most popular Linux distributions.

SPECIFICATION

FAQS

What type of USB does the Logi Bolt receiver use?

The Logi Bolt receiver uses USB 2.0 Type-A.

What version of the Bluetooth core specifications is Logi Bolt connectivity based on?

Our Logi Bolt wireless devices are Bluetooth Low Energy 5.0 or higher. We are actively using all the security mechanisms introduced in Bluetooth Low Energy Core Specification 4.2.
From a backward compatibility standpoint, Logi Bolt wireless devices are able to communicate with Bluetooth Low Energy 4.0 hosts or higher when in direct Bluetooth connection.

What is the effective range of Logi Bolt?

Logi Bolt wireless devices are Bluetooth Class 2, which means up to 10 meters wireless range.

What Security Manager Protocols does Logi Bolt use for pairing, bonding, encryption and signing?

The Logi Bolt security level used by our Logi Bolt devices during the communication are the following:

Are PIN codes used for authentication with Logi Bolt?

Logi Bolt does not use PIN codes. It uses Passkey during the authentication phase of pairing.
– In the context of a Logi Bolt wireless keyboard, it’s a 6-digit passkey (which means an entropy of 2^20).
– In the context of a Logi Bolt wireless mouse, it’s a 10-click passkey (which means an entropy of 2^10). At this time, we believe Logi Bolt is the only wireless protocol that enforces mouse authentication across all compatible operating systems.

Does Logi Bolt use Just Works security mode?

Just Works pairing to Logi Bolt USB receivers is not permitted. All Logi Bolt wireless mice and keyboards pair with the Logi Bolt USB receiver in Security Mode 1 – Security Level 4, also called Secure Connections Only mode.
If you or your organization have concerns or don’t permit direct Bluetooth connections yet want the convenience and better experience wireless computer peripherals offer, you can pair Logi Bolt wireless mice and keyboards to Logi Bolt USB receivers.
In addition, our Logi Bolt wireless mice and keyboards can also direct-connect to host computers via Bluetooth. In these cases where the Logi Bolt receiver is not used:
– For Logi Bolt wireless keyboard direct Bluetooth connections, Passkey is requested per industry standard.
– For Logi Bolt wireless mouse direct Bluetooth connections, Just Works Pairing is used per industry standard as there is no Passkey pairing standard for mice.

If the Logi Bolt device supports multiple pairings, does it use random/unique codes or static?

Users can pair up to six Logi Bolt wireless mice and keyboards to a single Logi Bolt USB receiver. Each pairing uses a different Bluetooth address and different long term keys (LTK) and session keys for encryption.

Are Logi Bolt devices discoverable when actively initiated?

Our Logi Bolt wireless devices are only discoverable during a pairing procedure which can be entered only upon explicit user action (a long 3-second press to the connect button).

What are the two wireless connection options for Logi Bolt wireless mice and keyboards?

The two wireless connection options are connecting via paired Logi Bolt USB receiver or connecting directly to the computer via Bluetooth Low Energy wireless technology.

Is the firmware of the Logi Bolt devices patchable should a vulnerability be discovered?

Yes. Our Logi Bolt wireless devices’ firmware can be updated by our software or via network push by IT administrators. However, we implemented anti-rollback protection for security patches. That means that an attacker cannot downgrade the firmware version to “reinstall” a patched vulnerability. Also, users and IT administrators cannot “restore factory settings”, eliminating security patches.

Does Logi Bolt meet the security requirements of most companies in regulated industries such as financial services, healthcare?

Logi Bolt was designed to address growing security concerns resulting from an increasingly mobile workforce — work from home being an obvious example. When paired with a Logi Bolt receiver, Logi Bolt wireless products use Bluetooth security mode 1, level 4 (also known as Secure Connections Only mode), which is U.S. Federal Information Processing Standards (FIPS) compliant.

Has Logitech conducted security testing on its implementation of the Bluetooth stack in the Logi Bolt devices?

Yes, Logitech received a third-party security assessment from a leading cybersecurity company. With that said, cybersecurity exposure constantly changes with new threats or vulnerabilities often on the horizon. That is one of the primary reasons we designed Logi Bolt based on Bluetooth Low Energy wireless technology. Bluetooth has a global community of more than 36,000 companies — its Special Interest Group (SIG) — on constant watch and dedicated to continual improvement, protection, and evolution of Bluetooth technology.

Did Logitech fix Logitech Unifying wireless security issues in Logi Bolt?

If an attacker attempts to impersonate a Logi Bolt wireless product to communicate with the Logi Bolt USB Receiver via RF, does the USB Receiver accept that input?
The usage of Secure Connections Only mode (Security Mode 1, Security Level 4) ensures that the communication is encrypted and authenticated. This means that there is a protection against on-path attackers which mitigates the risk of keystroke injection.
* Today there is no known attack on the Bluetooth Low Energy standard.
For the Logi Bolt USB Receiver to accept input, does the input need to be encrypted?
Yes, the usage of Secure Connections Only mode (Security Mode 1, Security Level 4) ensures that the communication is encrypted and authenticated.
Is there a means for an attacker to derive or steal the per-device link-encryption keys that pair the wireless product to the USB Receiver from RF enabling the attacker to inject arbitrary keystrokes or eavesdrop and live decrypt input remotely?
Sensitive data like link encryption keys are protected when stored on the Logi Bolt USB receiver.
With the LE Secure Connection (Security Mode 1, Security Level 2 and above), the Long Term Key (LTK) is generated on both sides in such a way that an eavesdropper cannot guess it (Diffie-Hellman key exchange).
Can a remote attacker pair a new Logi Bolt wireless product to a Logi Bolt receiver, even if the user has not put the Logi Bolt USB receiver into pairing mode?
The receiver has to be in pairing mode to accept a new pairing.
Moreover, even if an attacker tricks the user to put the receiver in pairing mode, we included a software-enable capability that alerts on the host monitor that there has been a change in the USB receiver to which the wireless device is paired (alarm notification).

Corporate policy does not allow use of Bluetooth connections. Can we deploy Logi Bolt wireless products?

Yes, Logi Bolt wireless mice and keyboards are in fact ideal for environments that do not permit Bluetooth connections. Though Logi Bolt is based on Bluetooth, it is an end-to-end closed system where a Logi Bolt receiver is emitting an encrypted signal that only connects with Logi Bolt products. So the Logi Bolt USB receiver can’t be paired with any non-Logi Bolt device. And because Logi Bolt works with most enterprise operating systems and is securely paired right out of the box, it makes procurement and set up that much easier.

Which products have Logi Bolt connectivity?

To see the Logi Bolt product line-up, visit logitech.com/LogiBolt.

Are Logi Bolt wireless products cross-compatible with Logitech Unifying wireless products?

Logi Bolt wireless products cannot be paired with a Logitech Unifying USB receiver and vice versa. Logitech Unifying wireless products cannot be paired to a Logi Bolt USB receiver.
However, in many cases, Logitech Unifying and Logi Bolt products can be used simultaneously with the same host computer if the host computer has two available USB-A ports. Just keep this in mind — when possible, the best option is to plug your Logi Bolt USB receiver into a port, then power on your Logi Bolt wireless product. This ensures you get the strong signal and security that Logi Bolt offers when paired with its USB receiver.

How do I use a combination of Logitech wireless products on the same computer?

When possible, the best option is to plug your Logi Bolt USB receiver into a USB port, then power on your Logi Bolt wireless product. This ensures you get the strong signal and security that Logi Bolt offers when paired with its USB receiver. If you have more than one Logi Bolt product, you can (and should) pair up to six Logi Bolt products to a single Logi Bolt USB receiver.
Start by identifying which USB receiver provides what type of connection. Visit logitech.com/logibolt for more information.

Next, if unsure what type of wireless mice and keyboards you have, look for a matching logo/design mark on the bottom (the side that rests on the desk surface) of your Logitech wireless products.

1. If you have two available USB A ports:
– Plug in both the Logi Bolt and Logitech Unifying or 2.4 GHz USB receivers. They can be used on the same computer with their respective wireless products. No required software downloads in most instances. Simply plug in the USB receivers, power on wireless products. This ensures you get the strong signal and security that Logi Bolt offers when paired with its USB receiver.

2. If you only have one available USB A port:
– If you have a 2.4GHz product or if your Unifying wireless product requires a USB receiver (it does not have Bluetooth as a connection option), plug the 2.4 GHz or Unifying receiver into a port, power on and off your wireless product. Next, connect your Logi Bolt wireless product via Bluetooth.
– If you have an advanced Unifying wireless product with Bluetooth as a connection option, connect your advanced Unifying wireless product via Bluetooth. Next, plug in your Logi Bolt USB receiver into a port. Power on your Logi Bolt wireless product. This ensures you get the strong signal and security that Logi Bolt offers when paired with its USB receiver.

3. If you don’t have any USB A ports or none are available:
– In this case, you probably have a Unifying wireless product that has Bluetooth as a connection option and it’s connected to the computer via Bluetooth. Simply add your Logi Bolt wireless product via Bluetooth.

Why aren’t Logi Bolt and Logitech Unifying cross-compatible?

Logi Bolt is based on the global wireless standard for simple, secure connectivity, Bluetooth Low Energy Wireless Technology. Logitech Unifying is a proprietary 2.4 GHz radio frequency wireless protocol that was developed by Logitech. Plainly, they don’t speak the same language.

Is it possible to pair multiple devices with the same Logi Bolt receiver?

Absolutely. Just like Logitech Unifying connectivity protocol, you can pair up to six Logi Bolt wireless products to a single Logi Bolt USB receiver. In fact, this feature may be in demand more now than ever with individuals who have multiple workspaces — office and home. With one set of Logi Bolt peripherals in the office and another at home, there is no need to carry or commute your favorite peripherals in between workspaces. Simply position the laptop or tablet into range and your wireless products will be ready to use when powered on.
To learn how to pair more than one Logi Bolt wireless product to your Logi Bolt USB receiver, visit logitech.com/options to download Logitech Options software which will walk you through the easy steps.

Will Logitech continue to sell Logitech Unifying wireless products?

Starting in 2021, Logi Bolt is Logitech’s new connectivity protocol for wireless mice and keyboards (non-gaming). Logi Bolt may someday be extended to wireless headsets. However, it will take several years before Logitech’s extensive and popular product portfolio is 100% transitioned to Logi Bolt.

Will Logitech continue to provide routine online, telephone and email support for Unifying products?

Yes, we will continue to provide Logitech Support for Unifying wireless products.

How do I know if my device is Logitech Unifying or Logi Bolt?

Start by identifying which USB receiver provides what type of connection. Visit www.logitech.com/logibolt for more information.

Next, if you’re unsure what type of wireless mice and keyboards you have, look for a matching logo/design mark on the bottom (the side that rests on the desk surface) of your Logitech wireless products.

I lost my Bolt receiver, how do I order a new one?

You can order a replacement Logi Bolt USB receiver from logitech.com and from many popular retailers and eTailers.

Connection & Pairing

How to connect a Bolt device

You can either connect via Bluetooth Low Energy wireless technology or via the tiny Logi Bolt USB receiver, locking in an FIPS-secure connection even in congested wireless environments.
You can learn more about pairing and unpairing Logi Bolt keyboard and mice via Bluetooth or using the Logi Bolt app/Logi Web Connect in the FAQs below:
– How to pair and unpair a Logi Bolt keyboard using the Logi Bolt app
– How to pair and unpair a Logi Bolt mouse using the Logi Bolt app
– How to pair and unpair a Logi Bolt device to Bluetooth on Windows
– How to pair and unpair a Logi Bolt device to Bluetooth on macOS
Click here if you want to learn Logi Bolt or here if you need some more help or information

How to pair and unpair a Logi Bolt keyboard using the Logi Bolt app/Logi Web Connect

The Logi Bolt app/Logi Web Connect should be used to pair and unpair your Logi Bolt keyboard. First, make sure you have the Logi Bolt app installed or open Logi Web Connect.

Pairing a Log Bolt keyboard
Open the Logi Bolt app/Logi Web Connect and click Add Device.

On your Logi Bolt keyboard, long-press the connect button for three seconds until the light blinks rapidly.

The Logi Bolt app will now detect your Logi Bolt keyboard. To connect, press the CONNECT option next to the name of your device.

Verify your device by typing the passphrase numbers and then press Enter.

If you accidentally type the wrong number, your device will not be verified and will not connect. You will have the option to try again or cancel.

If you typed the verification numbers correctly, you will get the notification that your device has been connected after you press Enter. The keyboard should now work and you can click Continue to finish the pairing process.

The Logi Bolt app will now show your device connected, how it is connected, and the battery life. You can now close the Logi Bolt app.

Unpairing a Logi Bolt keyboard
To unpair a Logi Bolt keyboard, open the Logi Bolt app and next to your device, click on the X to start the unpairing.

Click YES, UNPAIR to confirm unpairing. Your device has now been unpaired.

How to pair and unpair a Logi Bolt mouse using the Logi Bolt app/Logi Web Connect

How to pair and unpair a Logi Bolt device to Bluetooth on Windows

Logi Bolt keyboards and mice can be connected via Bluetooth instead of Logi Bolt. Logi Bolt keyboards and mice support Windows Swift Pair and this is the fastest way to pair your device.
Pairing a Logi Bolt keyboard or mouse to Bluetooth using Windows Swift Pair
On your Logi Bolt keyboard or mouse long press the Connect button for at least three seconds until the light is rapidly flashing.
Swift Pair will show a notification allowing you to connect your Logi Bolt device.

If you dismiss, take too long or something goes wrong, you will get a notification that the pairing has failed. If this happens, please try to connect using the Windows Bluetooth settings.

If you click Connect, Windows will start to connect to the Logi Bolt device and notify you that the device has been paired. You can now already use your Logi Bolt device.

Windows does need to do set up some additional settings and will show you two additional notifications


Pairing a Logi Bolt keyboard or mouse to Bluetooth using Windows Bluetooth settings
Go to the Bluetooth & Other Devices settings in Windows and click Add Bluetooth or other device.

You will see the option to Add a device — select the option Bluetooth.

On your Logi Bolt keyboard or mouse long-press the connect button for at least three seconds until the light is rapidly flashing and appears in the list of devices you can connect.

Click the name of the Logi Bolt device you want to connect to start the process.

If you are connecting a Logi Bolt mouse, you will see a final notification that the mouse is ready to go and can be used. Click Done to complete the Bluetooth pairing.

If you are connecting a Logi Bolt keyboard you will be asked to enter a PIN. Please type the numbers you see and press Enter to complete the pairing.

You will see a final notification that the keyboard is ready to go and can be used. Click Done to complete the Bluetooth pairing.

Once completed Windows needs to set up some additional settings and will show you two additional notifications.


Unpair a Logi Bolt device from Bluetooth
Go to the Bluetooth & other devices settings in Windows, click on the name of the Logi Bolt device you want to unpair, then click the button Remove device.

You will be asked to confirm if you want to remove the device and you must click Yes to continue. Click anywhere else to cancel the unpairing.

Windows will start to remove the pairing, the Logi Bolt device will be removed from the list, and no longer be connected to your computer.

How to pair and unpair a Logi Bolt device to Bluetooth on macOS

Pairing a Logi Bolt keyboard
1. Long press the connect button for three seconds on your device to put it in pairing mode.
2. Go to System Preferences, and click on Bluetooth.

3. Under the list of devices, look for the one you are trying to pair, and click on Connect.

4. Enter the passcode from the keyboard followed by the Return key. Click on Connect.

5. The keyboard is now connected to your Mac.

Pairing a Logi Bolt mouse
1. Long-press the Connect button for three seconds on your device to put it in pairing mode.
2. Go to System Preferences, and click on Bluetooth.

3. Under the list of devices, look for the mouse you are trying to pair, and click on Connect.

4. The mouse is now connected to your Mac.

Unpair a Logi Bolt keyboard or mouse
1. Go to System Preferences, and click on Bluetooth.

2. Under the connected devices, click on x for the one you want to unpair.

3. On the popup, click on Remove.

4. Your device is now unpaired from the Mac.

How to connect multiple Bolt devices to one receiver

You can pair up to six Logi Bolt wireless mice and keyboards to a single Logi Bolt USB receiver.
You can learn more about pairing and unpairing Logi Bolt keyboard and mice using the Logi Bolt app on Microsoft Windows or Apple macOS in the below FAQs:
– How to pair and unpair a Logi Bolt keyboard using the Logi Bolt app
– How to pair and unpair a Logi Bolt mouse using the Logi Bolt app
Click here if you want to learn Logi Bolt wireless technology or here if you need some more help or information.

How to pair and unpair a Logi Bolt keyboard using the Logi Bolt app/Logi Web Connect

How to pair and unpair a Logi Bolt mouse using the Logi Bolt app/Logi Web Connect

The Logi Bolt app/Logi Web Connect should be used to pair and unpair your Logi Bolt mouse. First, make sure you have the Logi Bolt app installed or open Logi Web Connect.
Pairing a Log Bolt mouse
Open the Logi Bolt app/Logi Web Connect and click Add Device.

On your Logi Bolt mouse long-press the connect button for three seconds until the light blinks rapidly.

The Logi Bolt app will now detect your Logi Bolt mouse. To connect, press the CONNECT option next to the name of your device.

Verify your device by clicking a unique button combination. Follow the instructions to verify your device.

If you accidentally click the wrong buttons, your device will not be verified and will not connect. You will have the option to try again or cancel.

If you clicked the verification buttons correctly you will get the notification that your device has been connected. The mouse should now work and you can click Continue to finish the pairing process.

The Logi Bolt app will now show your device connected and how it is connected and the battery life. You can now close the Logi Bolt app.

Unpairing a Logi Bolt mouse
To unpair a Logi Bolt mouse, first open the Logi Bolt app, and next to your device click on the X to start the unpairing.

Click YES, UNPAIR to confirm unpairing your device. Your device has now been unpaired.

How to pair and unpair a Logi Bolt keyboard using the Logi Bolt app/Logi Web Connect

The Logi Bolt app/Logi Web Connect should be used to pair and unpair your Logi Bolt keyboard. First, make sure you have the Logi Bolt app installed or open Logi Web Connect.

Pairing a Log Bolt keyboard
Open the Logi Bolt app/Logi Web Connect and click Add Device.

On your Logi Bolt keyboard, long-press the connect button for three seconds until the light blinks rapidly.

The Logi Bolt app will now detect your Logi Bolt keyboard. To connect, press the CONNECT option next to the name of your device.

Verify your device by typing the passphrase numbers and then press Enter.

If you accidentally type the wrong number, your device will not be verified and will not connect. You will have the option to try again or cancel.

If you typed the verification numbers correctly, you will get the notification that your device has been connected after you press Enter. The keyboard should now work and you can click Continue to finish the pairing process.

The Logi Bolt app will now show your device connected, how it is connected, and the battery life. You can now close the Logi Bolt app.

Unpairing a Logi Bolt keyboard
To unpair a Logi Bolt keyboard, open the Logi Bolt app and next to your device, click on the X to start the unpairing.

Click YES, UNPAIR to confirm unpairing. Your device has now been unpaired.

How to pair and unpair a Logi Bolt mouse using the Logi Bolt app/Logi Web Connect

The Logi Bolt app/Logi Web Connect should be used to pair and unpair your Logi Bolt mouse. First, make sure you have the Logi Bolt app installed or open Logi Web Connect.

Pairing a Log Bolt mouse
Open the Logi Bolt app/Logi Web Connect and click Add Device.

On your Logi Bolt mouse long-press the connect button for three seconds until the light blinks rapidly.

The Logi Bolt app will now detect your Logi Bolt mouse. To connect, press the CONNECT option next to the name of your device.

Verify your device by clicking a unique button combination. Follow the instructions to verify your device.

If you accidentally click the wrong buttons, your device will not be verified and will not connect. You will have the option to try again or cancel.

If you clicked the verification buttons correctly you will get the notification that your device has been connected. The mouse should now work and you can click Continue to finish the pairing process.

The Logi Bolt app will now show your device connected and how it is connected and the battery life. You can now close the Logi Bolt app.

Unpairing a Logi Bolt mouse
To unpair a Logi Bolt mouse, first open the Logi Bolt app, and next to your device click on the X to start the unpairing.

Click YES, UNPAIR to confirm unpairing your device. Your device has now been unpaired.

How to pair and unpair a Logi Bolt device to Bluetooth on Windows

Logi Bolt keyboards and mice can be connected via Bluetooth instead of Logi Bolt. Logi Bolt keyboards and mice support Windows Swift Pair and this is the fastest way to pair your device.
Pairing a Logi Bolt keyboard or mouse to Bluetooth using Windows Swift Pair
On your Logi Bolt keyboard or mouse long press the Connect button for at least three seconds until the light is rapidly flashing.
Swift Pair will show a notification allowing you to connect your Logi Bolt device.

If you dismiss, take too long or something goes wrong, you will get a notification that the pairing has failed. If this happens, please try to connect using the Windows Bluetooth settings.

If you click Connect, Windows will start to connect to the Logi Bolt device and notify you that the device has been paired. You can now already use your Logi Bolt device.

Windows does need to do set up some additional settings and will show you two additional notifications


Pairing a Logi Bolt keyboard or mouse to Bluetooth using Windows Bluetooth settings
Go to the Bluetooth & Other Devices settings in Windows and click Add Bluetooth or other device.

You will see the option to Add a device — select the option Bluetooth.

On your Logi Bolt keyboard or mouse long-press the connect button for at least three seconds until the light is rapidly flashing and appears in the list of devices you can connect.

Click the name of the Logi Bolt device you want to connect to start the process.

If you are connecting a Logi Bolt mouse, you will see a final notification that the mouse is ready to go and can be used. Click Done to complete the Bluetooth pairing.

If you are connecting a Logi Bolt keyboard you will be asked to enter a PIN. Please type the numbers you see and press Enter to complete the pairing.

You will see a final notification that the keyboard is ready to go and can be used. Click Done to complete the Bluetooth pairing.

Once completed Windows needs to set up some additional settings and will show you two additional notifications.


Unpair a Logi Bolt device from Bluetooth
Go to the Bluetooth & other devices settings in Windows, click on the name of the Logi Bolt device you want to unpair, then click the button Remove device.

You will be asked to confirm if you want to remove the device and you must click Yes to continue. Click anywhere else to cancel the unpairing.

Windows will start to remove the pairing, the Logi Bolt device will be removed from the list, and no longer be connected to your computer.

How to pair and unpair a Logi Bolt device to Bluetooth on macOS

Pairing a Logi Bolt keyboard
1. Long press the connect button for three seconds on your device to put it in pairing mode.
2. Go to System Preferences, and click on Bluetooth.

3. Under the list of devices, look for the one you are trying to pair, and click on Connect.

4. Enter the passcode from the keyboard followed by the Return key. Click on Connect.


5. The keyboard is now connected to your Mac.

Pairing a Logi Bolt mouse
1. Long-press the Connect button for three seconds on your device to put it in pairing mode.
2. Go to System Preferences, and click on Bluetooth.

3. Under the list of devices, look for the mouse you are trying to pair, and click on Connect.

4. The mouse is now connected to your Mac.

Unpair a Logi Bolt keyboard or mouse
1. Go to System Preferences, and click on Bluetooth.

2. Under the connected devices, click on x for the one you want to unpair.

3. On the popup, click on Remove.

4. Your device is now unpaired from the Mac.

Logi Bolt app/Logi Web Connect & Options

How to install and uninstall the Logi Bolt app in Windows

Installing the Logi Bolt app
You can download the Logi Bolt app from logitech.com/logibolt or from logitech.com/downloads.
Shown below is an example of the installer downloaded to the Windows Desktop.

Double-click the downloaded file to start the installation.
The Logi Bolt app installation will prompt you to install by clicking Install. You are prompted to agree to the end-user license agreement.

The Logi Bolt app installation starts and will take a few seconds.

Once the Logi Bolt app installation is complete, it will show the following notification. Click Continue to complete the installation and launch the Logi Bolt app.

The Logi Bolt app will now launch automatically and ask you if you have to participate in sharing your diagnostic and usage data. You can choose not to share the data by clicking No, thanks, or agree by clicking Yes, share. These diagnostic and usage sharing settings can also be changed later through the Logi Bolt settings.

The Logi Bolt app has now been installed and is running.

Uninstalling the Logi Bolt app
Go to the System Settings and select Add or remove programs.

The Apps & features section displays all the installed applications on your computer.  Click on the Logi Bolt app, and then click Uninstall.

A new window will open and you are prompted to confirm that you want to uninstall the Logi Bolt app — click Yes, Uninstall.

The uninstallation will proceed and will take a few seconds to complete.

Once completed you will receive a final notification that the Logi Bolt app has been uninstalled. Click Close to close the notification. The Logi Bolt app has been uninstalled from your computer.

How to install and uninstall the Logi Bolt app on macOS

Installing the Logi Bolt app
You can download the Logi Bolt app from logitech.com/logibolt or from logitech.com/downloads.
Shown below is an example of the Logi Bolt Installer downloaded to the Mac desktop. Double-click the downloaded file to start the installation.

The Logi Bolt app installation will prompt you to install — click Install. Agree to the end-user license agreement to continue.

The Logi Bolt app installation will start and take a few seconds. Enter your password when prompted.

Once the Logi Bolt app installation has been completed it displays the following notification, Click Continue to complete the installation and launch the Logi Bolt app.

The Logi Bolt app will now launch automatically and prompt you to share diagnostics and usage data. You can choose not to share the data by clicking No, thanks, or agree by clicking Yes, share. These diagnostic and usage sharing settings can also be changed later through the Logi Bolt settings.

The Logi Bolt app is now installed and running.

Uninstalling the Logi Bolt app
Go to Finder > Application > Utilities, and double-click on Logi Bolt Uninstaller.

Click on Yes, Uninstall.

Type your password when prompted, and click OK.

Logi Bolt is now uninstalled.

Note: In your ‘Users’ folder, if you see a folder named ‘builder’ with subfolders ‘F7Ri9TW5’ or ‘yxZ6_Qyy’ mentioning Logi or LogiBolt.build, please delete the entire ‘F7Ri9TW5’ or ‘yxZ6_Qyy’ subfolder. They are being left behind due to an error and we will be fixing it in the next update.

How to change the Share diagnostics and usage data settings in the Logi Bolt app

1. The Logi Bolt app offers you the ability to change the Share diagnostics and usage data settings through its Settings. Here are the steps on how to change the setting:
Open the Logi Bolt app.

2. Click on the … to open the menu and select Settings.

3. The Settings options offer you the ability to enable or disable Share diagnostics and usage data by sliding the toggle left or right. Note that when the toggle is highlighted, sharing diagnostics and usage data is enabled.

How to change language in the Logi Bolt app/Logi Web Connect

The Logi Bolt app and Logi Web connect offer you the ability to change the app language through its Settings. Here are the steps on how to change the setting:
1. Open the Logi Bolt app.

2. Click on the … to open the menu and select Settings.

3. The Settings options offer you the ability to change the language. The Logi Bolt app by default uses the same language as your operating system.

4. If you want to change language, choose the dropdown menu Use system language and select your desired language from the available languages. The language change is immediate.

How to check the app version and for updates in the Logi Bolt app

The Logi Bolt app will be default updated automatically to the latest available version. If you need to change the automatic update setting or check the app version you can do so through the Logi Bolt app settings.
1. Open the Logi Bolt app.

2. Click on the … to open the menu and select Settings.

The Settings screen will show you the Logi Bolt app version, but you also have the ability to manually check for updates and enable and disable the automatic updates by toggling the button.

How to stop the Logi Bolt app from running at startup in Windows

The Logi Bolt app will automatically launch at the Windows startup. We’ve done this to make sure you get the best experience from your Logi Bolt device and receive all the important updates and notifications and therefore recommend that you do not disable it from running at startup.
If you want to disable it from running at startup, open the Windows system setting Startup Apps.

In the Startup App you will see all the applications that are set to start at Windows startup. In the list, you will be able to find the app LogiBolt.exe and you can use the toggle to enable or disable the app from running at startup.

How to stop the Logi Bolt app from running at startup on macOS

The easiest way to disable Logi Bolt from running at startup is to do it from the Dock.
– Simply right-click on Logi Bolt in the Dock, hover over Options, and then uncheck Open at Login.

– You can also do this by going to System Preferences > Users & Groups > Login Items. Select Logi Bolt and click on the minus button to disable the app from opening at login.

What’s changed in Options version 9.20 which has the Logi Bolt app bundled with Options?

If you installed or updated to Logitech Options 9.20, the new Logi Bolt app would also have been automatically installed and set to run. The Logi Bolt app is used with our latest generation of Logi Bolt wireless products, specifically to pair more than one Logi Bolt product to a single Logi Bolt USB receiver or to replace a Logi Bolt USB receiver.
We have temporarily removed Logitech Options 9.20 and stopped all automatic updates since we understand that this isn’t the desired experience we want all our customers to have.
When Options bundled with the Logi Bolt app returns, the Logi Bolt app will not have analytics turned on by default and the app will not auto-start when the computer starts.

Why was the Logi Bolt app installed when I installed or updated the Logitech Options app?

If you installed or updated to Logitech Options 9.40 the new Logi Bolt app would also have been automatically installed and set to run. The Logi Bolt app is used with our latest generation of Logi Bolt wireless products, specifically to pair more than one Logi Bolt product to a single Logi Bolt USB receiver or to replace a Logi Bolt USB receiver.
We temporarily removed Logitech Options 9.40 and stopped all automatic updates, since we understand that this isn’t the desired experience we want all our customers to have.
You can keep using Logitech Options 9.40 and remove the Logi Bolt app, if you do not have a Logi Bolt compatible device. You can safely uninstall the software using these instructions for Windows or macOS.

I don’t have Logi Bolt supported devices, can I uninstall the Logi Bolt app?

If you do not have a Logi Bolt compatible wireless product you can safely uninstall the software using the instructions for Windows or macOS.
If you want to install it in the future, you can download it from logitech.com/downloads or by using the link within Logitech Options

I don’t want the Logi Bolt app running in the background, can I uninstall the Logi Bolt app and download it when needed?

If you do not have a Logi Bolt compatible device, you can safely uninstall the software using the instructions for Windows or macOS.
If you want to install it in the future, you can download it from logitech.com/downloads or by using the link within Logitech Options.

Logi Bolt app has sharing diagnostics and usage data enabled, even though I declined it when I installed Logitech Options

The Logi Bolt app bundled with Logitech Options 9.40 for Microsoft Windows did have a bug where sharing diagnostics and usage data was enabled even if you have declined during the Logitech Options update and/or installation.
We have temporarily removed Logitech Options 9.40 and stopped all automatic updates since we understand that this isn’t the desired experience we want all our customers to have.
You can disable the diagnostics and usage data sharing settings by following the instructions found here.
If you do not have a Logi Bolt compatible device, you can safely uninstall the software using the instructions for Windows or macOS.

I have Logi Bolt wireless products and want to use Options

Effective September 15, if you download Options from the product support page on support.logi.com or prosupport.logi.com, the Logi Bolt app bundled with Logitech Options for Windows 9.20.389 will have analytics disabled by default and the Logi Bolt app will not auto-start by default.

Logi Bolt App Release Notes

Version : Release Date
1.2 : Jan. 5, 2022
1.01 : Sept. 28, 2021
1.0 : Sept. 1, 2021

Version 1.2
You can now pair your compatible devices via the Unifying USB receivers.
Fixed some crashes.

Version 1.01
Removed the app icon from the taskbar notification area on Windows and the menu bar on macOS.
Bug fixes.

Version 1.0
This is the first release of the app. You can pair your Logi Bolt compatible devices with the Logi Bolt receiver.

Which browsers support Logi Web Connect?

Logi Web Connect supports the latest versions of Chrome, Opera and Edge.

Which operating systems support Logi Web Connect?

Currently, Logi Web Connect works on Chrome OS operating system.

Does Logi Web Connect work offline?

Logi Web Connect is a progressive web app (PWA) and can work offline once installed.

Logi Web Connect Release Notes

Version : Release Date
1.0 : Jun. 21, 2022

Version 1.0
This is the first release of the app. You can pair your Logi Bolt compatible devices with the Logi Bolt receiver.

Troubleshooting

How to troubleshoot Logi Bolt compatible devices on Windows and macOS

If you have connected your Logi Bolt compatible keyboard and/or mouse using the included Logi Bolt receiver and experience issues, here are some troubleshooting suggestions:
NOTE: If you are experiencing issues using Bluetooth together with your Logi Bolt compatible keyboard and/or mouse, please check here for more help.

Symptoms:
– Connection drops
– Device doesn’t wake up computer after sleep
– Device is laggy
– Delay when using the device
– Device cannot be connected at all

Likely Causes:
– Low battery level
– Plugging the receiver into a USB hub or other unsupported device such as a KVM switch
NOTE: Your receiver must be plugged directly into your computer.
– Using your wireless keyboard on metal surfaces
– Radiofrequency (RF) interference from other sources, such as wireless speakers, cell phones, and so on
– Windows USB port power settings
– Potential hardware issue (device, batteries, or receiver)

Troubleshooting Logi Bolt devices
– Verify the Logi Bolt receiver is connected directly to the computer and not to a dock, hub, extender, switch, or something similar.
– Move the Logi Bolt keyboard or mouse closer to the Logi Bolt receiver.
– If your Logi Bolt receiver is in the back of your computer, it may help to relocate the Logi Bolt receiver to a front port.
– Keep other electrical wireless devices, such as phones or wireless access points, away from the Bolt receiver to avoid interference.
– Unpair/repair using the steps found here.
– Update the firmware for your device if available.
– Windows only — check if there are any Windows updates running in the background that may cause the delay.
– Mac only — check if there are any background updates that may cause the delay.
Try on a different computer.

Bluetooth devices
You can find troubleshooting steps for issues with your Logitech Bluetooth device here.

How does the Dictation Key work on Logi Bolt keyboards?

WindowsⓇ macOSⓇ and iPadOSⓇ operating systems have native dictation features: Online Speech Recognition for Windows, Apple Dictation for macOS, and iPadOS. Reliable use of dictation often requires an internet connection. The Logitech Dictation key  activates enabled Dictation with the press of just one key instead of a combination of keys or menu navigation activation.
These dictation features may be subject to third-party privacy and usage terms and conditions. For further information about these third-party systems — Speech Recognition for Windows or Apple Dictation for macOS — please inquire with Microsoft and Apple product support, respectively.
Dictation is not the same as Voice Control. The Logitech Dictation key does not activate Voice Control.

How is dictation enabled?
If dictation is not already enabled, when the user first tries to activate it via the Logitech Dictation key, they will be required to authorize use.
On Windows, a notification may appear on the screen:

Speech Recognition is enabled in Windows settings:
In macOS a notification may appear on the screen:
Apple Dictation is enabled in macOS settings:
Apple Dictation is enabled in iPadOS Settings > General > Keyboard . turn on Enable Dictation. For more information, see https://support.apple.com/guide/ipad/ipad997d9642/ipados.

For what applications does dictation work?
Users can dictate text anywhere they can type text.

For what languages does dictation work?
According to Microsoft, Windows supports the languages listed here: https://support.microsoft.com/windows/use-dictation-to-talk-instead-of-type-on-your-pc-fec94565-c4bd-329d-e59a-af033fa5689f.

Apple doesn’t provide a list for macOS and iPadOS. We recently counted 34 language options in the control settings.

Can dictation be enabled or disabled by the user? If yes, how?
Yes, dictation can be disabled and enabled by the user if IT has not centrally disabled the feature.

On Windows, select Start > Settings > System > Sound > Input. Choose your input device, and then select the microphone or recording device you want to use. For more information see the Microsoft support article https://support.microsoft.com/windows/how-to-set-up-and-test-microphones-in-windows-10-ba9a4aab-35d1-12ee-5835-cccac7ee87a4.

On macOS and iPadOS, select Apple menu > System Preferences, click Keyboard, then click Dictation. Read the Apple support article here:
https://support.apple.com/guide/mac-help/use-dictation-mh40584/11.0/mac/11.0.

How to use the dictation key on Logitech keyboards

You can use the dictation key to dictate text instead of typing. This feature is provided by Windows and macOS and is currently only available in select countries and languages. You will also need a microphone and a reliable internet connection.
Click here for a list of supported languages on Windows, and click here for supported languages on macOS.
As of August 2021, Microsoft Windows supported dictation languages were:
– Simplified Chinese
– English (Australia, Canada, India, United Kingdom)
– French (France, Canada)
– German (Germany)
– Italian (Italy)
– Portuguese (Brazil)
– Spanish (Mexico, Spain)
In some cases, the dictation key will only work when Logitech Options software is installed. You can download the software here.
Alternatively, you can customize the dictation key in Logitech Options to trigger another function. For instance, you can trigger “Microsoft Office Dictation” allowing you to dictate in Microsoft Word. To learn more, please see How to enable Microsoft Office Dictation in Logitech Options.
If you experience any typing issues, please see I tried to use the Microsoft Windows dictation feature but my language is not supported. Now my typing is garbled or incorrect for more help.

How can I use dictation if it doesn’t work in my language?

Microsoft Windows and Apple macOS dictation is currently only available in select countries and languages.
You can read more about dictation and get updated supported language lists below:
– Windows
– Mac
Alternatively, you can customize the dictation key in Logitech Options to trigger “Microsoft Office Dictation” which is supported in more languages, allowing you to dictate in Microsoft Word. For instructions, see How to enable Microsoft Office Dictation in Options.

Will dictation work in my country/language? You promote dictation on your packaging.

We are working around the current capabilities of Windows 10 and macOS to ensure everyone has access to this popular feature. Stay tuned for updates as they become available.
As of August 2021, Microsoft Windows supported dictation languages were:
– Simplified Chinese
– English (Australia, Canada, India, United Kingdom)
– French (France, Canada)
– German (Germany)
– Italian (Italy)
– Portuguese (Brazil)
– Spanish (Mexico, Spain)

You can read more about dictation and get updated supported language lists below:
– Windows
– Mac

I tried to use the Microsoft Windows dictation feature but my language is not supported. Now my typing is garbled or incorrect.

Microsoft Windows and Apple macOS dictation is at present only available in select countries and languages.
You can read more about dictation and get updated supported language lists below:
– Windows
– Mac
If you experience any issues with dictation on Windows with an unsupported language such as your typing is garbled or incorrect, reboot your computer as this should resolve the issue. Alternatively, if your Logitech keyboard has an emoji key, try pressing it, as this could also resolve the issue. If it doesn’t,  please reboot your computer.
You can also stop the “Microsoft Text Input Application” in Microsoft Activity Manager.

How to enable Microsoft Office Dictation in Logitech Options

Microsoft Office supports dictation within Microsoft Word and Microsoft PowerPoint. You can read more about it at Microsoft Support: Microsoft Word,  Microsoft PowerPoint, and  Microsoft Outlook.
NOTE: The dictation feature is only available to Microsoft 365 subscribers.
To enable Microsoft Office Dictation:
1. In Logitech Options, enable Application Specific settings.

2. Select the Microsoft Word, PowerPoint, or Outlook profile.

3. Select the key you want to use to activate Microsoft Office Dictation. If your Logitech keyboard has a specific dictation key we recommend that you use it.

4. Select the option Keystroke Assignment and use the keystroke Alt + ` (backquote).

5. Click on the X to close Options and then test the dictation in Microsoft Word or PowerPoint.

Logitech G304 LIGHTSPEED Wireless Gaming Mouse

WHAT IS IN THE BOX

SETUP INSTRUCTIONS

1. Remove the battery cover by pressing the top of the cover and pulling it downwards
2. Remove the receiver
3. Insert the battery
4. Close the battery cover
5. Make sure the mouse is turned on via the switch on the bottom of the mouse
   
6. Recommended: Insert receiver into the receiver extension cable Insert extension cable into your USB port.
   Alternatively, insert receiver directly into your USB port
7. Download the G HUB software
   

Tips:

• To make your mouse lighter, a lithium AA battery (not included) can be used
• Keep the mouse and receiver 2 m+ away from wireless routers or other 2 4GHz wireless devices to minimize environmental noise
• G304 / G305 has a wireless range of up to 10 meters To ensure optimal performance in noisy wireless environments, it is recommended to keep the receiver within 20 cm of the mouse

6 FULLY PROGRAMMABLE BUTTONS

1. Left (Button 1)
2. Right (Button 2)
3. Wheel click (Button 3)
4. Forward (Button 4)
5. Back (Button 5)
6. DPI cycle (Button 6)
7. On/Off switch (bottom of mouse, not programmable)

LED INDICATOR

Battery life

Flashing red: battery <15%

DPI

Yellow: step 1 – 400 DPI
White: step 2 – 800 DPI (default)
Orange: step 3 – 1600 DPI
Magenta: step 4 – 3200 DPI
Blue: step 5 – 6400 DPI (Step 5 can be activated via software only)

Mode

Cyan: performance mode (default)
Green: endurance mode (can be activated via software only)

Tips:

• Activating endurance mode will degrade tracking performance but improve battery life

G HUB SOFTWARE

You can customize the onboard profile settings using the G HUB These settings include button programming, report rate, performance/endurance modes and tracking behavior G304 / G305 allows up to 5 DPI settings

By default, G304 / G305 has the following settings:

• DPI: 400/800/1600/3200
• Report rate: 1ms
• Performance mode

©2020 Logitech Logitech, Logitech G, Logi, 罗技、罗技 G and their respective logos are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice

WEB-621-001066 003

FAQS

PC does not have bluetooth can i still use it?

Yes there is no required Bluetooth connectivity I’m also using without Bluetooth

What is the range?

Approximately 2 meters in Performance mode and in Regular/PowerSaver mode it is nearly 5 meters. I always keep it in Performance mode at distance of 1.5 from receiver with direct line of sight and works fine for me. Although your condition may vary due to exact distance, position and line of sight.

Does it have also g hub detecting problem like g102?

It would not have, but incase of any issues please call our Toll free customer care number mentioned on the product page of any Logitech product in Amazon.

What is it’s click span??

Its been tested for 10 million clicks

why the price is up and When the white colour will be available?

Due to shortage in supply because of ongoing pandemic, prices are up for many products.

Does it use logitech unifying receiver?

No. It uses it own lightspeed receiver.

What is the best deal on this mouse?

If you are looking for wireless yes, if wired then their can be plenty of alternatives

Do the mouse shows what battery percentage is?

The Logitech G304 uses Logitech G HUB software which will notify you when 15% of battery remains. Also, the mouse has an LED indicator that starts flashing red when baterry is below 15%.

can it be used on any surface ?

Better use a mousepad or the skates of the mouse can get damaged.

So we can operate this mouse with either dongle or a single AA cell?

both required

What are the dimensions?

Height- 116.6 mm (4.6 inches), Width-62.15 mm (2.5 inches), Depth- 38.2 mm (1.5 inches), Weight- 75g (2.61 ounces) (Without battery) and 99g (3.49 ounces) (With 1x AA battery)

Do i need to Charge the battery? if yes than how? what does it mean 250 hour battery life?

One AAA BATTERIE
One signal receiver
Usb cable included but it is usb extender cable for the receiver

Does the Logitech G304 LIGHTSPEED Wireless Gaming Mouse use a Logitech unifying receiver?

No, it uses its own lightspeed receiver.

What is the click span of the Logitech G304 LIGHTSPEED Wireless Gaming Mouse?

The mouse has been tested for 10 million clicks.

Can I customize the onboard profile settings of the Logitech G304 LIGHTSPEED Wireless Gaming Mouse?

Yes, you can customize button programming, report rate, performance/endurance modes, and tracking behavior using the G HUB software.

What does the LED indicator on the Logitech G304 LIGHTSPEED Wireless Gaming Mouse show?

The LED indicator shows battery life, DPI settings, and mode.

How do I set up the Logitech G304 LIGHTSPEED Wireless Gaming Mouse?

The mouse has six fully programmable buttons, including left, right, wheel click, forward, back, and DPI cycle.

Reference: logitech G304 Gaming Mouse User Guide

VIDEO

Lightspeed is a registered trademark of Logitech Europe S.A.

G923
Racing Wheel and Pedals For PlayStation®5 consoles and PlayStation®4 consoles PlayStation®5 PlayStation®4
PlayStation®5 PlayStation®4 PlayStation®5 PlayStation®4
SETUP GUIDE

1. Mounting clamps
2. Cable management cleat
3. Optional shifter connection (DB-9 male)
4. USB cable
5. Pedal unit connection (DB-9 female)
6. Power connection
7. Bolt mounting points (uses M6X1 bolts)

USB and pedal cables (1, 2) should be routed through inner channels Power and optional shifter cables (3, 4) should be routed through outer channels Cables may be wrapped multiple times around cable management cleat to take in slack
3 ENGLISH

INSTALLATION — PS5TM consoles, PS4TM consoles — PC

Attach power adapter and USB cables as shown Every time your racing wheel connects with your system, it will rotate fully to each side and then to the center to calibrate Your wheel will be ready once this calibration is completed For PC to enable the force feedback and RPM LED features on your G923 Wheel and Pedals, you must install the Logitech G HUB software This can be found at logitechG com/support/G923-ps

TRUEFORCE and advanced features require game integration Visit logitechG com/support/G923-ps for a complete list of supported games

MOUNTING CLAMPS

G923 Racing Wheel is equipped with a built-in clamping system for mounting to a table Push down and rotate clamp knobs to lock or unlock Rotate clamp knobs to tighten or loosen clamps
Note: Clamp extenders should be removed for attachment to thicker tables

BUTTONS

1. Steel paddle shifter
2. Directional pad
3. L2 and R2 buttons
4. L3 button*
5. +/- Setting Adjustment buttons*
6. Steel paddle shifter
7. H, J, K, L buttons
8. Share/Create button
9. R3 button*
10. 24-point selection dial and button
11. OPTIONS button
12. PS button

* Requires supported games on PS5TM consoles/PS4TM consoles Assignable in any game on PC using either in-game assignment or Logitech G HUB software

Your Racing Wheel contains dual motors that will provide force feedback with supported games and systems In supported titles, you will also experience our next generation approach to force feedback: TRUEFORCE TRUEFORCE integrates directly with game physics and audio to unlock high-definition, real-time force feedback Tire grip, suspension, weight, horsepower–even unique engine sound resonance–are immediately and accurately felt through the wheel Supported titles on PlayStation®5 consoles, PlayStation®4 consoles and

PC may implement TRUEFORCE high-definition force feedback For a list of supported titles, visit logitechG com/support/G923-ps
Note: Your Racing Wheel has an overheat protection circuit safeguard to protect it under high-temperature operating conditions In rare instances, force feedback features may shut down during use while controls continue to operate If this occurs, allow the wheel to cool down and power it down by unplugging it If this occurs frequently, contact product support

FEATURES

1. Clutch pedal
2. Brake pedal
3. Throttle pedal
4. Textured heel rest
   
5. Bolt mounting points (uses M6X1 bolts)
6. Patented carpet grip system
7. Carpet grip release clip
   Push towards rear of pedal unit to release
8. Change pedal face position (requires 2 5mm hex key)
   

USING THE DUAL CLUTCH IN-GAME

Using a dual clutch system from a grid start in a race enables you to achieve maximum traction without the need to find the bite point of your clutch pedal – this can give you a significant advantage at the start of a race
To use the dual clutch system in-game:

1. At race start, fully depress the clutch pedal and the button assigned to the dual clutch function (see next section for setting instructions)
2. Select first gear using the Gear Up Paddle and fully depress the gas pedal
3. As soon as you get the green light for race start, immediately release the Dual Clutch button The car should start moving as the bite point of the clutch is engaged
4. Smoothly release your foot from the clutch pedal in order to achieve maximum traction It’s worth practicing this last step and modifying the bite point setting several times to find a method that works for you Once you have it perfected, this feature can help make up several places on the grid

SETTING UP THE DUAL CLUTCH SYSTEM

1. Press and hold the left and right steel paddle shifters L3 and R3 buttons together for two seconds to enter dual clutch setting mode The RPM LEDs will illuminate blue and flash slowly:
   
   Note: Support for the dual clutch function is not possible in some games A list of games that support the dual clutch feature can be found at logitechG com/support/G923-ps
   Note: Whilst in the Dual Clutch setting mode, the RPM LEDs will not respond to the game/SDK
2. Press the button you want to set as the dual clutch button The only valid buttons for this are the L3 and R3 buttons The RPM LEDs will flash red to show that you’re in clutch position setting mode
3. While in your chosen simulation or game with the car still on a track, fully depress the clutch and gas pedals Engage first gear and keep pressing the minus button down until the car begins to move in-game You can adjust the precise bite point of the clutch by using the plus and minus buttons until you are happy with the setting
4. At this point, you may test the dual clutch without leaving the setting mode It is recommended you attempt a race start, stop the car and adjust the bite point and then try again until you are satisfied with the performance of the dual clutch
5. Press the Select button in the middle of the dial on the wheel to exit dual clutch setting mode The RPM LEDs will flash in a sequence from green to blue to show that the setting is saved The RPM LEDs will then go out and begin responding again to RPM output from supported games

RESETTING DUAL CLUTCH SYSTEM

Press and hold the left gear shift, right gear shift, and square button for two seconds The RPM LEDs will all flash four times and then extinguish to indicate that the Dual Clutch system has been reset The button assigned to the Dual Clutch system (L3 or R3) will revert to its normal function

USING LOGITECH G HUB

Logitech G HUB enables the following features on the G923: · Button programming with profiles that can be linked to games · Adjustment of wheel settings, such as Rotation Angle and TRUEFORCE strength · Testing of the various buttons, wheel and pedal functions

G HUB WHEEL SETTINGS

Sensitivity
Alters the output response of the wheel to be more or less sensitive Leaving this slider at 50% will provide a linear 1:1 output Between 51% and 100% will make the wheel increasingly more sensitive around the center movement of the wheel Between 0% and 49% will make the wheel decreasingly sensitive around the center movement of the wheel
Operating Range
The G923 is capable of up to 900 degrees of rotation Reducing this setting will change the point at which the wheel will reach full steering lock This is especially useful if you’re driving a car with a smaller actual steering lock angle, such as a Formula 1 or GT3 car
Centering Spring (for games without force feedback)
Most games that support force feedback already model the correct return to center function of the G923 based on the virtual car It is recommended that the Centering Spring option be turned off for these games
Enabling the Centering Spring option will allow you to override the game features and adjust the strength of the return to center force using the provided slider
Torque
Only available for TRUEFORCE supported games Torque controls the overall force feedback strength for your G923

Audio Effects
Only available for TRUEFORCE supported games Controls the overall strength of the audio-related effects (engine note, rumble strips etc ) when using TrueForcecompatible titles
If you are using your G923 in older titles that do not support TRUEFORCE, then adjustment of the force feedback can be performed from the settings menus of the game title

TESTING YOUR WHEEL AND PEDALS

On the wheel and pedals screens in G HUB, you can check every button and axis on your G923 in order to ensure everything is functioning correctly For the wheel you can also see the effect of altering the Operating range

G HUB PEDALS SETTINGS

Sensitivity
Alters the output response of the pedals to be more or less sensitive Leaving this slider at 50% will provide a linear 1:1 output Between 51% and 100% will make the pedal increasingly more sensitive around the initial movement of the pedal Between 0% and 49% will make the pedal decreasingly sensitive around the initial movement of the pedal
Combined Pedals
If checked, this will set the gas and brake pedals to become two halves of a single axis This will help the pedals operate correctly in older racing titles that do not support separate axes for pedals
Note: If left checked then the pedals will not behave correctly in modern racing titles If you find that just one of your pedals is functioning by accelerating when pressed and braking when released then you should make sure that this option is not checked

QUESTIONS?
Please visit logitechG com/support/G923-ps for more information or to get in touch with a customer representative

©2021 Logitech Logitech, Logitech G, Logi, TRUEFORCE and other Logitech marks are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries ” “, “PlayStation”, “PS5”, and “PS4″are all registered trademarks of Sony Interactive Entertainment Inc All rights reserved All other trademarks are the property of their respective owners Made in China
© 2021 GLogiLogitechLogitech GTRUEFORCE / ” “”PlayStation””PS5″”PS4″ Sony Interactive Entertainment Inc
WEB-621-001211 004

©2021 Logitech Logitech, Logitech G, Logi, TRUEFORCE Logitech Logitech Europe S A / ” “, “PlayStation”, “PS5”, “PS4”, Sony Interactive Entertainment Inc All rights reserved All rights reserved
© 2021 Logitech GLogiTRUEFORCE Logitech Europe S A / PlayStationPS5PS4 PlayStation Shapes Logo Sony Interactive Entertainment Inc

User Manual

Powerful, precise, and silent, M590 is designed to perform, so you can, too. The curved, right-handed shape lets you work comfortably for hours, while the compact design and up to two years of battery life give you the freedom to take your work anywhere.

PRODUCT OVERVIEW

1. Scroll wheel button and tilt buttons
2. Easy-Switch™ button
3. Channel and battery indicator
4. Forward button
5. Back button
6. On/Off slider
7. Battery and Unifying receiver storage*
   * Unifying receiver inside

CONNECT

Bluetooth wireless technology
In case you have limited USB slots, you can connect your M585 or M590 Silent mouse to your computer using Bluetooth. For compatibility requirements, please refer to system requirements

www.logitech.com/options

1. Download Logitech Options, click Add Devices, and select Add Bluetooth Device

2. Remove pull tab or make sure your mouse is ON

3. Short press Easy-Switch button to select desired channel

4. Long press Easy-Switch button to enter pairing mode

5. Find your M585/M90 mouse on the list of Bluetooth devices and connect

Logitech M585/M590 Silent can connect to one computer on the two provided channels using Bluetooth.

Unifying USB receiver

One tiny receiver for up to six Unifying devices. Plug it and leave it, then connect additional mice and keyboards to one computer.

First time out of the box

www.logitech.com/options

1. Download Logitech Options, click Add Devices, and select Add Unifying Device

2. Remove pull tab or make sure your mouse is on and extract Unifying receiver from battery hatch

3. Short press Easy-Switch button to select desired channel

4. Long press Easy-Switch button to enter pairing mode

5. Insert Unifying USB receiver

Repair with an existing Unifying receiver

www.logitech.com/unifying

1. Download Logitech Unifying Software

2. Make sure your mouse is On

3. Short press Easy-Switch button to select desired channel

4. Long press Easy-Switch button to enter pairing mode

5. Open Unifying software and follow onscreen instructions

Connecting to 2 systems

www.logitech.com/options

1. Download Logitech Options on both systems

2. Make sure your mouse is On

3. Long press Easy-Switch button to enter pairing mode

4. Connect to your first computer via either Unifying USB receiver or Bluetooth

5. Short press Easy-Switch button to switch to next channel

6. Long press Easy-Switch button to enter pairing mode

7. Connect to your second computer via Unifying USB receiver or Bluetooth

8. Enable FLOW through Logitech Options or press Easy-Switch button to switch between devices

Logitech M585/590 Silent can connect to up to two computers with either Bluetooth or Logitech Unifying receiver. One receiver is included in the box.

Specs & Details

Dimensions

Mouse

• Height: 4.06 in (103 mm)
• Width: 2.52 in (64 mm)
• Depth: 1.6 in (40 mm)
• Weight (with batteries): 3.56 oz (101 g)

Logitech Unifying receiver

• Height: 0.57 in (14.4 mm)
• Width: 0.74 in (18.7 mm)
• Depth: 0.24 in (6.1 mm)
• Weight: 0.06 oz (1.8 g)

Technical Specifications

SilentTouch Technology

Sensor Technology

• High Precision Optical Tracking
• DPI (Min/Max): 1000±

Buttons

• Number of Buttons: 7

Scrolling

• Precision scrolling wheel
• Scroll Wheel: Yes, Rubber
• Tilt wheel: Yes with middle click

Gesture Support (Windows): YesGesture Support (Mac): Yes

Battery

• Battery: 18 months
• Battery Details: 1 x AA (included)

Connectivity

• Connection Type: Bluetooth Low Energy and 2.4 GHz wireless connection
• Wireless range: 10 m (33ft)
• Easy-Switch, 2 channels

Indicator Lights

• LED: Battery and Connectivity/ Channel LED

Optional software

• Logitech Options
• Logitech Flow

1-Year Limited Hardware Warranty

• 910-005014

PRO WIRELESS
SETUP GUIDE

SETUP INSTRUCTIONS

1. A wireless receiver attached to the USB adapter can be found in the accessory box Plug one end of the cable into your PC, and the other end into the USB adapter and receiver
   – The receiver can also be used plugged directly into your PC However, using the cable and adapter when in wireless mode is recommended and allows for better connectivity and easy access to the cable for recharging
   
2. Turn mouse on via the switch on the bottom of the mouse
   
3. Download Logitech Gaming Software
   www.logitechG.com/support/pro-wireless
4. To charge, disconnect the cable from the adapter and plug it into the front of the mouse, Your mouse will operate in data‑over‑cable mode whenever it is plugged in directly to a PC Full charge from empty requires around 2 hours plugged into a PC USB port
   

Tips:
– Keep the mouse and receiver 2 m+ away from wireless routers or other 2 4GHz wireless devices to minimize environmental noise
– PRO WIRELESS has a wireless range of up to 10 meters To ensure optimal performance in noisy wireless environments, and to keep the charging cable easily accessible, it is recommended to keep the receiver within 20 cm of the mouse

BUTTON CONFIGURATIONS

PRO WIRELESS comes with replaceable buttons and button caps, which are held onto the mouse magnetically These should be stored in the box when not in use These replaceable buttons support conversion to the following configurations:

1. Right-handed
   
2. Left-handed
   
3. No buttons
   
4. Full buttons

 FULLY PROGRAMMABLE BUTTONS

1. Left (Button 1)
2. Right (Button 2)
3. Wheel click (Button 3)
4. Back (Button G4)
5. Forward (Button G5)
6. Back (Button G6)
7. Forward (Button G7)
   
8. DPI cycle (bottom of the mouse, Button 8)
9. Receiver storage door + Powerplay module enclosure (bottom of the mouse)
10. On/Off switch (bottom of the mouse, not programmable)

BATTERY LIFE

PRO WIRELESS has a rechargeable 250mAH LiPol battery which provides it with up to 60 hours of non‑stop gaming at 1ms report rate with lights off, or 48 hours of non‑stop gaming at 1ms report rate with RGB color cycling on *
– Charge level can be checked when the mouse is powered on or using Logitech Gaming Software to assign a button to check the charge level
– Charge level is displayed for seven seconds at mouse power‑on using the color and number of bars illuminated on the DPI indicator:
– 3 green dots = 50–100%
– 2 green dots = 30–50%
– 1 green dots = 15–30%
– 1 flashing red dot = <15%

CHARGING/DATA OVER CABLE

Plug your mouse in via the provided USB charging cable when the battery is low PRO WIRELESS is also compatible with the Logitech G POWERPLAY wireless charging system, sold separately

LOGITECH GAMING SOFTWARE

You can customize the onboard profile settings using the Logitech Gaming Software These settings include a button programming, report rate, performance/endurance modes, and tracking behavior PRO WIRELESS allows up to 5 DPI settings By default, PRO WIRELESS has the following settings:
– DPI: 400/800/1600/3200
– Report rate: 1ms
– Performance mode

DPI/ONBOARD PROFILE INDICATORS

DPI/Onboard profiles are shown using three LEDs under the main buttons The image below shows which values are being indicated by the LED panel

FREQUENTLY ASKED QUESTIONS
http://support.logitechG.com/product/pro‑wireless

© 2019 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the US and other countries All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice