MAREA B58001 Smart Watch

Function description of bracelet

Button description:

A: Touch Screen/ Full Touch Screen
B: Return Key/Long Press for Power on and off on Time Interface

Charging instructions:

Magnetic charging is as shown below.

*Be aware that the two contacts of the USB cable are not allowed to contact the conductor at the same time, or it will cause the circuit to burn.

1.1 Dial plate interface in standby mode:
1) Swipe right to open the push message interface;
2) Swipe down to open the drop-down menu which displays brightness, settings, do not disturb. Swipe left to open the weather interface
3) Swipe up to open the main menu list interface;
4) Press and hold the dial plate interface in standby mode to swipe and switch. Press and hold after selecting to set successfully.

1.2 Push message
Swipe right the standby interface to open the push message interface and bind the bracelet with Fundo app. When the notification authority is enabled, the new message received by the mobile notification bar will be pushed to the bracelet. A total of 8 pieces of messages can be saved. The message received after the 8th message will overwrite the previously received message one by one.

1.3 Drop-down menu
Swipe down the standby interface to open the drop-down menu interface.
1) The left icon shows the Bluetooth connection status
2) Click the middle icon to turn on/off the Do Not Disturb mode. When the Do Not Disturb mode is on, the vibration is activated only for Find the Bracelet and the Alarm;
3) The right icon can be used to adjust the screen brightness;

1.4 Step count
The step count is on by default. This interface displays the current number of steps in the bracelet. The data is cleared every day at 12 am.

1.5 Sleep
Sleep monitoring time period: from 21:00 to 9:00 in the next day, after the bracelet generates data and exits sleep monitoring, it binds Fundo app to synchronize the sleep data from bracelet end to APP end.

1.6 Bluetooth music
Android: after connecting the bracelet in the phone settings, open the music player, play/pause and switch songs at the bracelet end; (no need to bind in the app, if it is already bound, please unbind it and connect in the phone settings)
IOS: Open the music player after the bracelet is bound to the app, play/pause and switch songs at the bracelet end.

1.7 Weather
After the phone is connected to the network and the app has acquired the weather information, bind the bracelet to the app and push the weather information in the app to the bracelet.

1.8 Sports mode
(walking, running, cycling, hiking, swimming, football, basketball, table tennis, badminton)

1.8.1 Select the corresponding sports mode and click the screen to enter corresponding sports mode after countdown 3, 2, 1; swipe right to jump to the end of the sports interface, click “pause” to return to the sports interface to continue sports, click “” to end the sports and save the data;

1.8.2 Sports data can be saved when the distance is greater than 200 meters or the time is greater than 5 minutes; when the sports end without satisfying the condition, it will prompt “the data is too little to be saved”

1.8.3 After the bracelet is bound to the app, click the synchronization on the Fundo sports history interface to synchronize the history data of the sports at bracelet end and view trajectory and detailed data at the app end.

1.9 Heart rate
Wear the bracelet correctly on the (left hand/right hand) wrist and enter the heart rate menu for continuous measurement of the heart rate. After the bracelet is bound to the app, the heart rate data is synchronized to the app in real time.

1.10 Blood pressure
Wear the bracelet correctly on the (left hand/right right) wrist and enter the blood pressure menu for single measurement of blood pressure value. After the bracelet is bound to app, the blood pressure data can be synchronized to the app in real time.

1.11 Blood oxygen
Wear the bracelet correctly on the (left hand/right right) wrist and enter the blood oxygen menu for single measurement of blood oxygen value. After the bracelet is bound to app, the blood oxygen data can be synchronized to the app in real time.

1.12 Alarm clock
Bind bracelet to the app and set synchronized alarm clock in the app to the bracelet.

1.13 Sedentary reminder
Turn on/off sedentary reminder

1.14 Stopwatch
Enter the timing interface by clicking stopwatch, click the start icon to start timing and click again to pause. Swipe right to exit. When entering the stopwatch again, the previous timing is cleared and the timing is restarted.

1.15 Find mobile phone
Click Find the mobile phone at bracelet end to pop up a prompt box after the bracelet is bound to the app.

1.16 Remote camera
After the bracelet is bound to the app, click camera in the app and show remote camera icon on the bracelet and automatically turn on camera on mobile phone. Click the screen at the bracelet end to control the phone to take photos which are stored at the mobile phone end.

1.17 Settings

1.17.1 Sedentary reminder
It’s off by default. After connecting the APP, the on/off function at app end can control the function at bracelet end. This function can be manually turned on or off at bracelet end, but the APP is not affected.

1.17.2 Raise to wake
It’s off by default. After connecting the APP, the on/off function at app end can control the function at bracelet end. This function can be manually turned on or off at bracelet end, but the APP is not affected.

1.17.3 About
View the Bluetooth name and Bluetooth address and version number

1.17.4 Restore factory settings
Click Restore factory settings to restore the bracelet to the factory state 1.17.5 Shutdown After clicking Shutdown, the bracelet is turned off.

Bind app

APP download method

Scan QR code to download

Search in application market to  download

Android:

search Fundo in Myapp, Wandoujia, Google play and other application markets to download

IOS:

Search Fundo in the App Store to download

Android: the application icon of Fundo after installation is as shown:

iPhone: the application icon of Fundo after installation is as shown:

Bind Bluetooth

Unconnected:

After the bracelet is on, Bluetooth is always in the search state. After opening the APK/APP, enter more-connected devices, click search, and select the corresponding bracelet device name to bind the bracelet to the app successfully.

Bind to the app:

Bracelet time synchronization: After the bracelet is successfully bound to the app, click to realize the synchronization of the time and time format of the bracelet and the mobile phone.

Find devices

After the bracelet is successfully bound to the app, click Find Bracelet to vibrate and wake up bracelet screen for three times;

Data synchronization

After the bracelet is successfully bound to the app, the health data of the bracelet can be synchronized to the app; open the heart rate, sleep, and sports interface to select the date, click icon in the upper right corner to successfully share the data of current interface to the QQ, QQ space, WeChat, WeChat moment, Facebook, Twitter, etc.;

Message push

After the bracelet is successfully bound to the app, the corresponding notification authority in the mobile phone system is enabled. Enter more-notification application in app, start corresponding third party applications.

Call reminder:

Enable the call reminder in the personal application. When the mobile end receives one or more incoming calls, the bracelet will receive one or more call reminder at the same time;

SMS notification:

Enable SMS notification in the personal application. When the mobile end receives one or more SMS, the bracelet will receive one or more SMS reminders at the same time;

Other application message notifications:

Enable corresponding message notification in the personal application, such as WeChat, QQ, Facebook, Twitter, etc. When the mobile phone end receives one or more application message notifications, the bracelet end will receive one or more corresponding message notifications at the same time.

WeChat sports

The sports data of the bracelet can be synchronized to the WeChat sports ranking list. Follow the official account “Fundo health” to select the binding device and fill in the MAC address of the device for binding. After the binding is successful, the official account can synchronize the sports data (MAC address : Enter the bracelet to view);
Binding method:
The Android end suggests the binding to APP before the binding to WeChat.
The iPhone end does not need to bind the APP. Unbind first and ignore the device in the phone settings, then bind in the WeChat;

Do Not Disturb mode

When the Do Not Disturb mode is on, only Find bracelet and the alarm clock have vibration reminder.

Drinking reminder

Set the period from start to end and frequency (minutes), click to enter the resetting, select the water reminder date (week), check the drinking reminder and save. When the drinking reminder time arrives, it vibrates and shows drinking icon at the bracelet end.

Sedentary reminder

Set the period from start to end and sedentary interval (minutes), threshold (steps), click to enter the resetting to select the sedentary reminder date (week). When the sedentary reminder time arrives, it vibrates and shows sedentary icon at the bracelet end.

Alarm clock reminder

Click the alarm clock reminder setting to add the alarm time. When the alarm time arrives, the bracelet will prompt: the alarm icon and time, and vibrate for 20 times;

Reminder mode

a. Wake up screen: Any reminders other than alarm clock, sedentary and drinking reminder will only be prompted with bright screen at bracelet end;
b. Vibrate: Any reminders other than alarm clock, sedentary and drinking reminder will only be prompted with vibration at bracelet end;
c. Wake up screen + vibrate: for any reminder, the bracelet end only displays bright screen + vibrates;

Heart rate detection

Set the period from start to end and sedentary time interval (minutes), check the heart rate test and save.

Firmware upgrade

Detect whether the firmware version of the bracelet is the latest one. Prompt to update and upgrade to the latest version when there is a new one.

Unbind

After the bracelet is bound to app, click the connected device name or swipe left to unbind in More interface. Ignore the paired device in the iPhone settings.

FAQ

*Do not expose this device to overcooling or overheated conditions for a long time, otherwise it will cause permanent damage.

*Why can’t wear watch when taking a hot bath?
As bath water temperature is high, it will generate mass steam which is in gaseous phase and characterized by small molecule radius. It is easy to penetrate through watch housing gap. When temperature lowers, it will become liquid phase water drop, which is easy to cause short circuit in the watch, resulting in damaged circuit board and watch.

*The watch can’t start up or charge
If your newly received watch can’t start up, it maybe because battery is under protection due to collision during watch transportation. Plug in charging cable to activate the watch.
If your watch can’t start up due to too low battery or the watch has not been used for a long time, please plug in USB cable and charge for half an hour for activation.

B59002
User ManualPlease refer to this manual before using the product.

Cautions before using

1. The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in certain versions of software.
2. Please charge this product with the charger provided for no less than 2 hours before using it for the first time.
3. In the APP, set personal information to sync time before using the smartwatch. Please refer to the instructions about synchronization for details.
4. The watch has IP68 waterproof rating. It cannot be used in corrosive liquids or hot water, tea, etc. It is not compatible with deep-sea diving of more than 3 meters. All the above situations will cause damage to the smartwatch (these damages will not be covered by the warranty).

Product overview

Models can be paired with:

• Android phone: supports OS 5.0 and above
• Iphone: supports OS 9.0 and above

APP download and connection

2.1 Please scan the QR code below to download APP
It is recommended to use a browser to scan and download the app. Please give the corresponding permissions in the download and installation process to ensure a good Bluetooth connection. The APP name is “LinkTo Sport”.

QR code to download LinkTo Sport
http://api.start.king-wear.top/link-to/sports-app-download	LinkTo Sport app icon

Notes:

1. For Apple phone users: If it is in standby or hibernation state for a long time (for example, for 2 hours or more, the phone has not been used and it is in a black screen state), LinkTo Sport will be cleaned up by the iOS system, so the APP and the watch will disconnect and the functions on the APP will not be available. Please re-open it and they will automatically reconnect.
2. For Android phone users: After installing the APP on the phone, you need to enable the background application launch permission in the settings of your phone. Each smartphone is different. Take a Huawei phone as an example. The steps are as follows:
   Settings–Application–Application Launch Management—LinkTo Sport, find the application, change the automatic management to manual management, open all permissions (allow Autolaunch, Secondary launch, Run in the background). This is only for the application to maintain the Bluetooth connection with the watch while the phone is in standby mode (the phone does not have a bright screen). This permission will not use network traffic, nor does it affect the power consumption of the phone.

2.2 Link APP and smartwatch

2.2.1 Open the application, choose “Register” or “Login without registering”.
2.2.2 For Android users: click on “Pair new device” and select the model that corresponds with your smartwatch. Then the QR code scanner will open.
2.2.3 Open the QR code on the watch and scan it to link the watch. It will take about 30 seconds to connect properly after scanning. Confirm all permission requests that appear automatically to ensure that all functions work correctly.
2.2.4 For iPhone users: The request to “pair new device” will appear on your phone after scanning.
2.2.5 If the QR code scan fails, select the manual connection function to complete the pairing via Bluetooth.

2.3 APP settings (functions are available only if watch and phone have been paired successfully)

• Call notification: Tap to turn on/off this function. If turned on, you can hang up the incoming call on your watch.
• Social media notifications: Tap to turn on/off and choose which apps’ notifications you want to receive on your watch.
• Alarm clock (up to 5 alarms)
• Sedentary reminder: Tap to turn on/off. Set starting time, end time, interval, and threshold.
• Drink water reminder: Tap to turn on/off. Set starting time, end time, interval, and threshold.
• DND mode (Do not disturb mode): Tap to turn on/off. Set starting time and end time. Note: when turned on, the watch will not receive notifications.
• Turn on-screen when turning wrist: Tap to turn on/off.
• Heart rate monitoring: Tap to turn on/off. Set starting time, end time, and interval. If turned on, the watch will automatically monitor heart rate, and sync data to APP.
• Remote camera control (on some phones it may be necessary to turn on the camera manually on the phone)
• Find device: Upon tap, the watch will pop up a watch icon and vibrate.
• Firmware update (make sure there is at least 50% battery before updating, keep your watch near your phone during the update)
• Device version: To check the firmware version of the watch.
• Unbound (iPhone users must enter phone settings, enter Bluetooth settings, and ignore the device to make sure the device is completely disconnected)

Main functions

3.1 Basic Operation
3.1.1 Power on Long press the button for 3 seconds to turn on the watch, short press the button to light up the watch if it is in standby mode.
3.1.2 Power off if the screen is on, long-press the button for 3 seconds to turn the watch off.

3.1.3 Watch interface shift process:

1. Slide from top to bottom on the main screen dial to see the status bar, which includes DND mode, brightness level, settings, connection icon, and battery.
2. Slide from right to left on the main screen to enter the menu.
3. Slide from left to right on the main screen to see the messages received.
4. Slide from bottom to top on the main screen to see the health and sleep data.

3.2 Main screen selection
Long press the screen for 3 seconds to display all the options to choose from, slide left and right to choose the preferred main screen. Single touch to set it as the default main screen.

3.3 Pedometer

The watch automatically records steps, distance, and calories whenever the watch is on. To see the data from the pedometer: swipe right from the watch’s main screen or swipe left from the main screen to access the menu.
3.4 Sport mode
3.4.1 Sport mode includes outdoor walking, indoor walking, outdoor running, indoor running, cycling, hiking, and swimming. This smartwatch is not equipped with GPS, therefore the results of some sport modes that require A-GPS support may vary with different phones.
3.4.2 Click the icon to enter the corresponding sport mode and customize the goal of the day (distance, time, or calories) or set no goals. The smartwatch will automatically save the setting and will apply it the next time that sport mode is used.
3.4.3 Historical data: it saves the last 8 records. The records will be displayed in chronological order and can be viewed by sliding up and down.
Note: The data will only be saved when the exercise time is more than 5 minutes or more than 200 steps. Either one of those conditions will activate the recording function, otherwise, the recording function will fail due to insufficient data.
3.4.4 When you start recording the data, the watch screen will display the following content: type of sport and start time. You can swipe up and down to see detailed records. The data will vary according to the type of sport. 3.4.5 Goal completion: The smartwatch will display ‘Goal completed’ when the preset goal is accomplished. Moreover, the record function will keep recording if the exercise continues. more than 200 steps. Either one of those conditions will activate the recording function, otherwise, the recording function will fail due to insufficient data.
3.4.5 Goal completion: The smartwatch will display ‘Goal completed’ when the preset goal is accomplished. Moreover, the record function will keep recording if the exercise continues.

3.5 Sleep Monitor

The default sleep monitor starts at 21:00 pm and ends at 7:30 am the next day. If the watch is worn while sleeping, you can check the sleep time on the watch in the following morning.
If the smartwatch is paired with the phone, the sleep data will be synchronized automatically (or manually) with the application.
Note: The smartwatch is able to automatically identify the sleeping status. There may be differences between the detected data and the actual data because the watch may still be under the detection process. The watch will display the detected result of the whole night, which will be identical to the actual sleep data, once it finishes the monitoring. There may be some deviation from the actual sleeping status due to the change in different sleep modes.

3.6 Health
3.6.1 Heart rate: The display will show “–Bpm”. Two seconds later the heart rate test begins. The data will be displayed on the watch screen when the heart rate data is detected and the detection will be carried out continuously. If you want to stop the detection, swipe right to exit and return to the previous screen. In the app, you can check the historical data, including the highest and average data from the last test.
3.6.2 Blood pressure: The display will show “–mmHg”. Two seconds later the blood pressure test begins. The data will be displayed on the watch screen when the blood pressure data is detected and the detection will be performed continuously. If you want to stop the detection, swipe right to exit and return to the previous screen.
Note: All heart rate and blood pressure tests will take about 10-30 seconds to generate data.
3.7 Notifications (messages)

After you have successfully paired your phone and activated the notifications in the app, the messages received on the phone will be synchronized with the watch. The watch saves the last 8 messages and they can be deleted by sliding up and clicking on the trash can icon.
Note: the received messages can be read on the smartwatch, but they cannot be answered from the watch and audios cannot be played.
3.8 Alarm clock (only set via APP)
The application supports setting a maximum of 5 alarms.
3.9 Remote music player
3.9.1 If the watch has not been paired with your phone, an ‘unconnected’ message will pop up when you click the ‘Music’ icon, and it will automatically exit without any actions after 2 seconds.
3.9.2 After pairing the watch with your phone, you can enter the music player function of the watch to control the phone’s music player. There may be some compatibility problems due to the variety of music players. Usually, the watch can control your phone’s music player directly, but some players may need to be opened manually before being remotely controlled by the watch.
3.9.3 The watch can pause, play and switch to the previous or next song, but it does not show the name of the song and cannot adjust the volume.
3.10 Pairing with QR code
In the application, select “Pair new device” to scan the QR code of the watch and thus link with the phone. The “connection” icon in the watch’s drop-down menu will appear blue if the watch is connected. Each watch can only be connected to one phone.
3.11 Timer
Set target time, then click the start icon. The message “timed out” will pop up on the screen and the watch will vibrate.
3.12 Stopwatch
Click the start icon to start counting. Click the Pause icon to stop, click the clock icon to set a lap time. If the counting is stopped, the clock icon will change to two arrows, if it is clicked, the counting will stop and all records will be cleared. The watch keeps records of up to 20 lap times.
3.13 Find phone

If the watch is paired with the phone, when you click “Find phone” on the watch, the phone will vibrate and ring.
3.14 Settings
Screen brightness setting: there are 5 levels of brightness, click the screen to adjust it. QR code to download the app: you can use your phone to scan this QR code in order to download the latest version of the app.
Remote camera control: if the watch is paired with the phone when you click on the camera function on the watch, a camera icon will appear on the watch and the phone’s camera will open. If you click on the camera icon on the watch, it will take a photo on
the phone and be automatically saved in the phone’s photo album. On some phones, it will be necessary to open the camera manually before using this function. Reset: tap the left icon to exit, and tap the right icon to reset. Then all data of the watch would be cleared. Note: the data of the paired phone will not be cleared unless the phone is also reset. About: you can see the Mac address of the device, the Bluetooth name, and the firmware version.

Precautions

4.1 Only one smartwatch pairing application should be installed on the phone to ensure that the connection with the smartwatch is normal. If several applications are connected, they can affect the connection between the watch and the phone.
Note: Some Android phones will prompt you that you cannot install them. Please go to ‘settings of the phone and authorize the ‘Unknown source’.
4.2 When the mobile phone requests permissions, click “Allow”. On the contrary, you may not
receive notifications, scan QR codes, open the remote camera or use other functions. These permissions do not affect the flow of the phone or other information on the phone.
4.3 Some Android phones may accidentally close the app when cleaning the applications. Please keep the app running in the background.
Android phone settings (background running method): open the phone settings – application management – LinkTo Sport – Rights management – Backstage management – select background running. (The setting method may be different due to different mobile phone versions and models).
4.4 Heart rate monitoring requires that the watch and arm are in contact, and the watch should not be too tight or too loose. The test may be inaccurate if it is too tight because it will affect blood flow, and if it is too loose because it will affect heart rate sensor monitoring.
4.5 Avoid hitting the smartwatch, it could break the glass.
4.6 Use 5V, 1A for charging. This product does not support fast charging. Do not charge if the watch has water (or sweat) to avoid short circuits and damaging the product.
4.7 This product is an electronic monitoring product, not for medical reference.

Troubleshooting

In case there is a problem when using the smartwatch, please solve it according to the following steps. If the problem is not solved, please contact the seller or designated maintenance personnel.

5.1 The watch cannot be turned on:
5.1.1 Press the display touch area for over 3 seconds.
5.1.2 Make sure there is enough battery. Battery power may be too low, please charge it.
5.1.3 If the smartwatch has not been used for a long time and the normal charger does not respond, please try charging it with an output power of 5V/1A.
5.2 It shuts down automatically:
5.2.1 Battery power may be too low, please charge it.
5.3 Short battery life:
5.3.1 It may occur when the battery has not been fully charged, please ensure the is enough time for charging (at least 2 hours is required).
5.3.2 Charger or data cable may not work properly, please change to new ones.
5.3.3 Please check the port of the data cable and try again to ensure a proper connection.
5.4 Bluetooth disconnects or unable to connect:
5.4.1 Please restart it.
5.4.2 Please turn off the Bluetooth of the mobile phone and open it to reconnect.
5.5 Inaccurate sleep data:
The sleep monitor is designed to mimic the natural pattern of falling asleep and waking up.
Please use the smartwatch during the day, otherwise, a deviation may occur if you go to bed late or only use it while you sleep. Sleep data may not be generated if you go to bed during the day, since the default sleep time is set between 9:00 p.m. and 7:30 a.m.