True Wireless Earbuds
Model: Mpow M30 Plus

PACKING LIST

DIAGRAM

POWER ON

1. The earphones automatically turn on(with white LED light flashing) and start pairing when you open the charging case.
2. In the shutdown status and when the earphones are not in the charging case. simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the white LED light flashing).

POWER OFF

1. Put the earphones back in the charging case and close the case to turn them off.
2. If the earphones are not in the charging case. just press and hold the MFB of both earbuds for 5 seconds to power them off. (Mode 2 cannot be conducted during music playing or calling.)

PAIRING

1. Open the charging case, they will automatically enter the pairing mode in which the LED light flashes white and red alternately, and then select “Mpow M30 Plus·.

Note: The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone, please disconnect Bluetooth on the paired smartphone.

MUSIC

INCOMING CALL

MUSIC & INCOMING CALL & Siri

Volume Up/ Down
Volumes +: press and hold the MFB button of Right earbud to tum up the volume increasingly.
Volumes – : press and hold the MFB button of Left earbud to turn down the volume decreasingly.

Next/ Previous Track
Next Track: double tap the MFB of Right earbud.
Previous Track: double tap the M FB of Left earbud.

Play/ Pause
Tap the MFB of either earbud once.

Answer/ Hang Up
Double tap the MFB of either earbud.

Reject
Press and hold the MFB of either earbud for l second.

Activate Siri
Triple-tap the MFB of either earbud.

RESET

In the state of charging, press and hold the button on the charging case for l O seconds. The LED will flash red, which means that the paired information is cleared successfully.

CHARGING

Do not put the earbuds in the charging case A/hen the earbuds are wet

CORRECT DISPOSAL OF THIS PRODUCT

( Waste Electrical& Electronic Equipment)

This Marking shown on the product or its literature. indicate that it should not be disposed with other household wastes – at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wast.es and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product. or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the use(s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions,

(1) This device may not cause harmful interference. and

(2) this device must. accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Mpow-M30-Plus-True-Wireless-Earbuds-ManualOptimized PDFMpow-M30-Plus-True-Wireless-Earbuds-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

References

• User Manual

Selfie Stick Tripod
Mpow PA194A

Package Contents

Tripod Components

1. l/4″ Screw
2. Tri pod stand
3. Rubber sleeve
4. Tilt locking knob
5. Flip locks
6. Center column locking knob
7. Center brace
8. Center column base

Tripod Operation

l. Rotate the center column locking knob
counterclockwise to release the center column.
Open the tripod stand and move it to the height
you want. and then rotate the locking knob
clockwise to lock the legs firmly in place.

1. Pull out the flip lock to extend the center column to the desired height and then press down the flip lock to fot The maximum working height is 57″/l 45cm. (Retract it in the same way.)
2. Rotate the center column locking knob counterclockwise to have the legs folded up around the center column. and then relock it. The minimum working height isl 7″/43cm.

Phone Holder Assembly

Bluetooth Pairing

1. Turn on the Bluetooth remote control. The blue light flashes to show that it enters the pairing mode.
2. Turn on the Bluetooth on your phone and search for new devices. Pair up with”AB shutter 3″ successfully and the light will go off.
3. Turn off the remote control to shut the Bluetooth down.

Battery Replacement {Battery Model, CR2032)

Cautions

1. Set the volume button on your phone to act as the shutter button. Use the remote control to take a photo.
2. Please check up whether the Bluetooth connects to the previously connected device when you are having trouble pairing your phone with the remote control.
3. Remove the camera or phone from the tripod during transport.
4. Ensure that every lock/knob engaged is tighten and tripod securely placed before using.
5. When the battery of remote control is running low. Bluetooth pairing may fail.
6. Keep the selfie stick tripod from anything corrosive.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance couId void the use(s authority to operate the equipment

This device complies with part 15 of the FCC Rules Operation is subject to the following tMJ conditions

(1 ) This dEMce may not cause harmful interference. and
(2) This device must accept any interference received. including interference that may cause undesired operation.

FCC Radiation Exposure Statement,
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Mpow-Selfie-Stick-Tripod-PA194A-Manual-OptimizedDownloadMpow-Selfie-Stick-Tripod-PA194A-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

References

• User Manual

Air Vent Car Mount Pro
Mpow CA086B

Assemble

Installation

1. Make sure the clip is in the loosened state.
2. Insert the clip into the air vent louvers.

Mount the phone

1. Press the Release Button on the back
2. Push the clamps to lock.

Mpow-Air-Vent-Car-Mount-Pro-CA086B-Manual-Optimized Optimized PDFMpow-Air-Vent-Car-Mount-Pro-CA086B-Manual-Original Download

Questions about your Manual? Post in the comments!

References

• User Manual

Bluetooth Speaker
Mpow SoundHot Q2

Packing List

• Bluetooth speaker
• Charging cable
• Suction cup
• User manual
• Charging indicator card
• Thank You card

Specification

1. Device name : SoundhotQ2
2. Signal distance : 33ft
3. Bluetooth Version: V5.0
4. Compatible protocol : A2DP, AVRCP, HFP, HSP
5. Charging Voltage : 5V=1A
6. Max Capacity of TF card : 32G

Diagram

1. Power/ Mode switch button
2. Bluetooth function button
3. Volumes/Previous track
4. Pause/ Play
5. Volumes +/Next track
6. indicator light
7. 1F card slot
8. Micro USB charging port

TF Card Mode:

The speaker automatically enters TF card Mode after putting a TF card in the slot

Bluetooth Mode:

While in TF card Mode_ press the Power button for 1s Switching to Bluetooth Mode.

Power ON/OFF

Bluetooth Pairing:

Long press the power button for 2 seconds to power on. Enable Bluetooth on your smartphone, search Bluetooth device “Soundhot Q2” and click to pair. When the pairing is complete. the Bluetooth indicator light remains on.

Play Music

Switching Device

To connect to the other Bluetooth device, long press the Bluetooth function button to disconnect from the connected device A Then, the speaker enters in pairing mode, which needs you to search the Bluetooth device “Soundhot Q2” on the device B. Click to pair and connect to the device B.

Charging

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment this equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Mpow-SoundHot-Q2-Bluetooth-Speaker-BH363A-Manual-OptimizedOptimized PDFMpow-SoundHot-Q2-Bluetooth-Speaker-[BH363A]-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

References

• User Manual

Bluetooth Receiver
Mpow BH100C

Diagrams

1. Indicator Light
2. Multifunction Button
3. AUX Output
4. Charging Port

Specifications

• Bluetooth Version : V4.1 + EDR
• Bluetooth Range : Upto33feet
• Bluetooth Protocol : A2DP,AVRCP

Power On/Off

Power On: Connect this receiver to SV power supply with a micro USB cable.
Power Off: Disconnect this receiver from the micro USB cable.

Playing Music

Short press the Multifunction Button: Play/Pause the music.
Note: You can ONLY adjust the volume on your smartphone device.

Bluetooth Pairing

1. Pair the receiver with your smartphone for the first use.
2. After power on, double press the Multifunction button, and the receiver will enter pairing mode automatically with the red and blue indicator lights flash alternately.
3. Enable Bluetooth on your smartphone.
4. Search for Bluetooth devices and select”BHlOOC’.
5. Enter the code ·oooo· if needed.
6. If paring is successful, the blue indicator light will flash twice every 3 seconds.
7. Connect the receiver to your headset/ Home Speaker/Car Stereo System with a 3.5mm audio cable.
8. Now you can enjoy wireless music through your headset, Home Speaker/ Car Stereo System.

Connect to Two Bluetooth Smartphones Simultaneously

1. Pair the Bluetooth receiver to the first smartphone successfully.
2. Pair the Bluetooth receiver to the second smartphone: Enable Bluetooth on your second smartphone, select the “BH 1 00C” and click to connect
3. Two smartphones will be connected to the Bluetooth receiver at the same time.

Note:

If you want to switch to different smartphones to listen to music, please pause the first smartphone, and then play the music on the second smartphone.
It will switch to the music of the second smartphone after a few seconds.

Automatic Connection

The receiver will connect to the last connected smartphone automatically when it is turned on (Bluetooth must be enabled on your smartphone before powering on the receiver). The blue indicator light flashes once every 1 second in Bluetooth reconnection status. And the blue indicator light will flash twice every 1 second after the reconnection is complete.

Clear The Receiver’s Pairing List

Connect the product with USB cable first, then long press the Multifunction Button for about Bs until the red indicator light stays on for 1 sand then goes off. It will clear the pairing list that has paired before. After the pairing list is cleared, plug the receiver to power it on again. Double press the Multifunction button, and It will enter pairing mode with the red and blue indicator lights flash alternately.

Built-In Noise Isolator

The receiver is equipped with a built-in isolator, used to eliminate noise and output quality audio.

Troubleshooting

Q1: The receiver cant pair with the Bluetooth on your smartphone.

• Please make sure the product has entered pairing mode.
• Clear the Bluetooth pairing list of this receiver, and then try again.

Q2: The Bluetooth range or the sound quality is not good.

• Bluetooth signal can be blocked by surrounding objects that affect the audio quality. Please put it in the right position without barrier between the receiver and your smartphone.
• Turn off the unnecessary programs running in the backstage of your smartphone.

Correct Disposal of This Product

(Waste Electrical& Electronic Equipment)

A This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC Statement

Operation is subject to the following three conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. This device has been evaluated to meet general RF exp:>Sure requirement. The device can be used in portable exposure condition without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B
digit.al device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help .

Mpow-BH100C-Bluetooth-Receiver-Manual-OptimizedOptimized PDFMpow-BH100C-Bluetooth-Receiver-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

References

• User Manual

Bluetooth Transmitter
Mpow BH261 BT1/BT2

Packages

Diagram

1. Multifuction Button
2. Power Indicator Light
3. BT1 Bluetooth Pairing 3 Indicator Light
4. BT2 Bluetooth Pairing 4 Indicator Light
5. Micro USB Charging Port 6
6. AUX Audio Por

Specifications

Bluetooth Version: V5.0
Bluetooth Chip: CSR 8675
Product Model: BH261
Bluetooth Range: 15 meters
Bluetooth Protocol: A2DP
Frequency Range: 2.402 GHz～2.480 GHz
Codecs: aptX™ HD, aptX™ low latency aptX™ and SBC

Low Latency Function

BH261 supports aptX™ HD (APTX HD), aptX™ low latency (APTX LL) or aptX™(APTX). You can experience the low latency function only if your Bluetooth headphone, Bluetooth speaker etc. support APTX HD, APTX LL or APTX.

1.Power On / Power Off

Multifuction Button:

long press for 3 s to power on or off ;
short press to activate pairing mode ;
long press for 6 s to clear pairing list ;

Power On:

A: Plug to power on BH261 with the blue Power indicator light “ ” staying on. Then it enters pairing mode with the BT1 indicator light flashing.

B: In power-off state with BH261 plugged, long press the Multifunction button for 3 s to turn it on, then the Power indicator light stays on.

Power Off:

A: Unplug the power cable, BH261 will power off automatically with Power indicator light off.

B: In power-on state, long press the Multifunction button for 3 seconds to turn it off.

2. Enter Pairing Mode

Turn on BH261, short press the Multifunction button to enter pairing mode with the BT1 or BT2 indicator light flashing blue quickly.

3. Connection to the First Bluetooth Headphone

1. Connect BH261 to a television or non-Bluetooth computer via a 3.5 mm audio cable.
2. After BH261 powers on, it enters pairing mode automatically with the BT1 indicator light flashing blue quickly. The BT2 indicator light will not light on.
3. Turn on your Bluetooth headphone or Bluetooth speaker etc. and activate pairing mode. Note: Usually, your headphone’s indicator light will flash red and blue alternately or flash blue quickly.
4. The distance between BH261 and Bluetooth headphone or Bluetooth speaker should be within 1 meter. It may take 5-30 seconds to complete the connection. The BT1 indicator lights for different codecs can be shown as follows:

A: The BT1 blue indicator light stays on (SBC transmission).
B: The BT1 green indicator light stays on (APTX or APTX LL or APTX HD transmission)

5. When the above connection is complete, you can enjoy music or TV program via your Bluetooth headphone or Bluetooth speaker.

4. Connection to the Second Bluetooth Headphone

1. After BH261 has been connected to the first Bluetooth headphone or Bluetooth speaker, turn on your second device and activate pairing mode (Note: Usually, its indicator light will flash red and blue alternately or flash blue quickly).
2. Short press the Multifunction button on BH261. And it will enter pairing mode with the BT2 indicator light flashing blue quickly. The first connected device won’t be affected, and can function normally.
3. Narrow the distance between BH261 and the second device, such as Bluetooth headphone, speaker etc. (within 1 m). It may take 5-30 seconds to complete the connection to the second device. And the corresponding indicator lights for different codecs can be shown as follows:

A: The BT1 and BT2 indicator lights will stay blue (SBC transmission: if either headphone doesn’t support APTX).

B: The BT1 and BT2 indicator lights will stay green (APTX transmission: both headphones support APTX).

5. Bluetooth Reconnection

1. Reboot BH261, and it will enter reconnection state: reconnect to last two paired devices by priority.
   (Note: After you hold the Multifunction button for 3 s, the Power
2. In power-off state, long press the Multifunction button for 6 s until 3 indicator lights stay on simultaneously for 1 s to clear pairing list 2 . If BH261 fails to reconnect in 22 seconds, it will enter pairing mode automatically; you can also short press the Multifunction button to enter pairing mode at once.

6. Clear Pairing List

1. In power-off state, long press the Multifunction button for 6 s until 3 indicator lights stay on simultaneously for 1 s to clear pairing list (Note: After you hold the Multifunction button for 3 s, the Power indicator light will stay on and BT1 indicator light flashes). Then, BH261 powers on in pairing mode.
2. In power-on state, long press the Multifunction button for 6s until 3 indicator lights stay on for 1 s to clear pairing list (Note: After you hold the Multifunction button for 3 s, BH261 powers off with indicator lights off). Then, BH261 powers off.

7. Charging

Please charge BH261 via an adapter (above 5V/0.5A) or USB charging port.

Note

• If BH261 can’t be paired with two devices. Reboot BH261 and try pairing again.
• It’s recommended to use two headphones with the same chips, which can avoid possible intermittent music, no sound or disconnection etc.
• BH261 cannot be paired with smartphones or other similar devices. It can only be paired to Bluetooth headphone or Bluetooth speaker.
• For a better music quality, it’s recommended to select headphones of a same model when pairing BH261 to two headphones simultaneously.

FCC Statement

Operation is subject to the following three conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical& Electronic Equipment)

This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

Mpow-Bluetooth-Transmitter-BH261-BT1-BT2-Manual-Optimized Optimized PDFMpow-Bluetooth-Transmitter-BH261-BT1-BT2-Manual-Original Download

Questions about your Manual? Post in the comments!

References

• User Manual

Mpow isnap x2
Flexible Tripod
PA203A / MPPA203AB

PACKAGE CONTENTS

DIAGRAM

1. 1/4″-20 Screw
2. Pan-and-tilt Head
3. 1/4″-20 Screw
4. Pan-and-tilt Head
5. Flexible Tripod
6. Anti-skid Foot Pad
7. 360° Ball Head
8. Adjusting knob for Ball Head
9. Angle Adjustment Knob for Tripod

2-LEVEL ADJUSTABLE TRIPOD

BLUETOOTH CONNECTION

1. Turn the switch on the remote control to “On”, and the blue light flashes to show that it enters the pairing mode.
2. Turn on Bluetooth on your phone and pair with “Mpow isnap X2”. Once paired, the light turns off.

Tips: The battery can be replaced. No need to charge.

BATTERY REPLACEMENT

INSTALLATION

Mode 1

Mode 2

For Phone

1. Loosen the adjustment knob to adjust the 1/4″-20 screw to the right position.
2. Align the hole on the phone holder with the 1/4″-20 screw, then rotate to fix it.
   

For Camera

Connect the 1/4″-20 screw to the screw thread at the bottom of the camera and then tighten to fix it.

For GoPro

Connect the GoPro adapter to the pan-and-tilt head, then install the GoPro with the protective housing on the GoPro adapter and tighten it.

NOTE

1. If the remote control cannot control the phone to take photos, please set the volume button on your phone to act as the shutter button.
2. To ensure the safety of the installed phone/camera, please carefully unfold the tripod.
3. Before use, please make sure that each knob is tightened and the tripod is securely placed.
4. Please remove the camera or phone from the tripod when moving to another shooting scene.
5. Please do not overload the tripod, as this may cause damage to the product (Max.load:1.5kg/3.3lbs).

Mpow-isnap-x2-Flexible-Tripod-PA203A-MPPA203AB-Manual-Optimized Optimized PDFMpow-isnap-x2-Flexible-Tripod-PA203A-MPPA203AB-Manual-Original Download

Questions about your Manual? Post in the comments!

References

• User Manual

Mpow Bluetooth Music Receiver

Packing List

Bluetooth Music Receiver x1
USB Charging Cable x1
3.5 mm Audio Adapter x1
3.5 mm Audio Cable x1

Specification

Connection Technology : Bluetooth
Output Power : Class 2
Bluetooth Protocol : HFP/HSP/A2DP/AVRCP/CVC
Working Current : ~1s mA
Battery : 250 mAh

Diagram

1. Multifunction Button: Pause/ Play; Answer/ Hang up a Call
2. NextTrack
3. Previous Track
4. VolumeUp
5. Volume Down
6. Mic1
7. AUXOutput
8. Power Switch Button
9. USB Charging Port
10. Mic2
11. Bluetooth Indicator Light

Power On

Turn the Power Switch button to the “ON” side. The product will automatically power on with red indicator light staying on for 1 s. Then the red and blue indicator lights flash alternately.

Power Off

Turn the Power Switch button to the “OFF” side. The red indicator light will stay on for 1 sand then the product will power off automatically.

Pairing and Connection

Pairing to One Smartphone

1. To ensure the pairing effect, the distance between the product and your smartphone should be within 1 m.
2. Turn the Power Switch button to the •ow side. The product will power on automatically with the red indicator light staying for 1 s. Then, the product will enter pairing mode automatically with red and blue indicator lights flashing alternately.
3. Enable the Bluetooth function of your smartphone, search the Bluetooth device ·BH203″ and click it to connect.
4. Enter the password “0000” if needed.
5. When the product completes pairing, the blue indicator light will flash slowly at interval.

Pairing to Two Smartphones

1. When you’ve paired to the first smartphone, enable the Bluetooth function of the second smartphone. Search the Bluetooth device “BH203” and click it to connect.
2. When the pairing to the second smartphone is complete, the product can connect to both smartphones simultaneously.

Note: If the pairing is complete, the product will connect to last paired Bluetooth-enabled smartphone automatically next time when it powers on (ensure the Bluetooth function of your smartphone is enabled before you power on the product).

Bluetooth Hands-free Call

Playing Music

Clearing Bluetooth Pairing List

Sleep Mode

1. If there is no Bluetooth connection or operation when the product powers on , it will automatically enter sleep mode after 10 minutes.
2. When the distance between the product and your smartphone exceeds the effective Bluetooth range, it will disconnect Bluetooth connection. Then after 20 minutes, the product will enter sleep mode automatically.

Charging

1. Please charge the product via the USB cable (DC SV).
2. The red indicator light stays on during the charging. It goes off when the product is fully charged.

Note:

1. When the battery is in low power state, the product will alarm automatically with the red indicator light flashes quickly. If the product runs out of battery, it will power off automatically. Please charge the product in time.
2. If the product is not used frequently, please charge the product every 3 months to prevent from any potential damage to the product or the battery.

Correct disposal of this product

(Waste Electrical & Electronic Equipment)

• This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

• To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

• Household user should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling.

• Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Operation is subject to the following three conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
3. This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

.

Mpow-Bluetooth-Music-Receiver-Manual-OptimizedDownloadMpow-Bluetooth-Music-Receiver-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

References

• User Manual

Mpow Flame Pro TWS
Model: BH379A

PACKING LIST

DIAGRAM

POWER ON

1. The earphones automatically turn on (with blue LED light flashing) and start pairing when they are taken out from the charging case.
2. In the shutdown status. and when the earphones are not in the charging case. press and hold the MFB button on the Right and Left earphones for 2s to power on (with the blue LED light flashing).

POWER OFF

1. Put the earphones back in the charging case. and they’ll shut down automatically.
2. If the earbuds are not in the charging case.just keep pressing the MFB button for Ss on the R/L earphone to power off.

PAIRING

1. The earphones automatically start pairing (with the blue LED light flashing twice quickly every second on the right earbud) when they are taken out from the charging case. Next, choose ”Mpow Flame Pro” on your device.
2. Turn it on by pressing and hold “L’&”R’ earphones simultaneously for 2s. then press and hold the “R” earphone for 2s to enter into pairing mode in which the LED light on the right earbud flashes blue twice quickly every second. Next select ‘M pow Flame Pro” on your device.

MUSIC

Pause/ Play Automatically

INCOMING CALL

Answer/ Hang up
Click the MFB button on the Right or Left earphone once.

Reject
Keep pressing the MFB button on the Right or Left earphone lor 1 s.

Activate Siri
Double Click MFB button on the Right earphones.

RESET

1. . Tum off your device Bluetooth and disconnect Mpow Flame Pro with Your phone.
2. Simultaneously double click both buttons of lvolume up, then keep pressing both buttons tor S seconds.
3. The LED light will flash blue 4 times every second which means that reset is successful.

CHARGING

Note: wireless charger is sold separately.

Do not put the earbuds in the charging case when the earbuds are wet

CORRECT DISPOSAL OF THIS PRODUCT

( Waste Electrical& Electronic Equipment)

This Marking shown on the product or its literature. indicate that it should not be disposed with other household wastes – at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wast.es and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product. or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the use(s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions,

(1) This device may not cause harmful interference. and

(2) this device must. accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Mpow-Flame-Pro-TWS-BH379A-Manual-OptimizedOptimized PDFMpow-Flame-Pro-TWS-BH379A-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

References

• User Manual

Mpow EM19
Bluetooth Headset

We are appreciated for purchasing our Mpow EM19. This guide Contains instructions for setting up and using your Mpow EM19 easily.

Package List

Diagram

Power ON/ OFF

How To Pair

1. Auto pairing : tum on the earbud. it will automatically enter into pairing mode in which the blue and red light will flash alternately. Then select “Mpow EM19”.
2. Manual pairing: when the earbud is off. press and hold the MFB button for more than Ss. the blue and red light will flash alternately. Then Select “Mpow EM19”.

Play/ Pause/ Answer /Hang Up/ Redial /Reject/ Siri /Mute

Charge Battery

Correct Disposal of This Product

( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate – that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local g011emment office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.

FCC Statement

Any Changes or modifications not expressly approved cy the party responsible for compliance could void the users authority to operate the equipment

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Notification

1. Please fully charge it if it was going to lay idle for a long time and place it in a cool and dry place. Please recharge it each 2 months for storage.
2. Please fully charge it for the first use.

Mpow-EM19-Bluetooth-Headset-Manual-OptimizedOptimized PDFMpow-EM19-Bluetooth-Headset-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

References

• User Manual