Let life slower,You will be wonderful.

If you encounter any problems with the operation, please feel free to contact us. [email protected]

Function description：

Pairing method with mobile phone:

Step 1: Slide the top cover of the charging box and take out the two headphones. The left and right headphones will automatically open and complete the connection. (“R” headphone LED indicator appears as red and blue alternately lit)

Step 2: Open the mobile phone Bluetooth device, search for the pairing name “V10-R”, and click Finish to connect. (Headphone LED indicator appears as blue slowly flashing)

Share usage mode (left and right headsets are connected to AB phones respectively):

Step 1: Take the “L” earphone separately from the charging box and wait for 30 seconds. The headphone LED indicator flashes red and blue alternately. Turn on the “A” phone Bluetooth, search for the device, find “V10-L”, and click Finish to connect.

Step 2: Take the “R” earphone from the charging box and wait for 15 seconds. The headphone LED indicator flashes red and blue alternately. Open the “B” phone Bluetooth, search for the device, find “V10-R”, click to complete the connection.

Note:

If you need to restore the normal stereo mode, just put the “L” and “R”
headphones back into the charging box, and then take out the two
headphones. The left and right headphones will connect to each other first,
enter the stereo state, and then automatically connect the B phone by default.

The headset may not work properly due to incorrect operation. This is not a quality defect. You can solve it in the following ways:

1. Clear the Bluetooth pairing information of the mobile phone, put the left and right earphones back into the battery box, take out the earphones, and re-pair the connected mobile phones.
2. Clear the Bluetooth pairing information of the phone, restore the left and right headphones to the factory settings, and then reconnect the phone.

Restore factory settings.

Method one
Step 1: Remove the “L” headset from the charging box. Wait 30 seconds, when the LED indicator turns red and blue alternately, press the multi-function button 4 times (interval time is 0.5 seconds), the headphone LED indicator turns red and then goes out. The “L” headphones are restored to the factory settings. Put in the charging box.

Step 2: Remove the “R” headphones from the charging case. Wait 20 seconds, when the LED indicator turns red and blue alternately, press the multi-function button 4 times (interval time is 0.5 seconds), the headphone LED indicator turns red and then goes out. The “R” headphones are restored to the factory settings. Put in the charging box.

Method Two
Step 1 Manual shutdown: Remove the left and right headphones from the charging box, press the multi-function button for 10 seconds, the LED indicator turns red and then goes out.

Step 2 Turn on and pair: Press the left and right headset multi-function buttons for 10 seconds, and then release the finger after the left and right headphone LEDs flash alternately.

Step 3 Restore the factory settings: quickly press the left and right earphones multi-function button 4 times, the left and right earphone LEDs turn red and then go out.

Multi-function button operation instructions：

Product Parameters：

Charging:

(1) Headphone charging.
The charging box has a built-in battery. When the charging box is fully charged, put the earphone into the charging box to charge the earphone. When the earphone is in the charging state, it always lights up red, the charging box is always bright blue; when the earphone is charged When saturated, it lights up in blue, turns off after 30 seconds, and the blue light of the charging box goes out.

(2) Charging the charging box.
When the power of the charging box is too low or no power, connect the USB cable to charge; when the charging box is in the charging state, the blue light flashes; when the charging is saturated, the blue light is always on.

Boot method:

(1) Automatic boot.
Open the top cover of the charging case, then pick up the two headphones, and the two headphones will automatically turn on. (There is a power-on tone)

(2) Manual boot.
When the earphone is not inside the charging box, you can manually touch the power on; at the same time, press and hold the two headphones to open the key for about 3 seconds, then let go, this time is the power on state.

Shutdown method:

1. Put two earphones into the charging box. At this time, the earphones are always lit red. At this time, it is in the state of charging, and it is turned off at this time;
2. Press and hold the two earphones for about 3 seconds at the same time to turn off the headphones;
3. When the headset is disconnected from the mobile phone for more than 5 minutes, the headset automatically shuts down;

Other functional tests:

1. Boot back.                                                                                                          Automatically connect back to the paired mobile phone after booting;
2. Over distance return.
   The main ear and the mobile phone can return to a certain distance within 5 minutes after disconnection; the main ear and the auxiliary ear can be connected back within a certain distance within 5 minutes after being disconnected;
3. The distance does not return.
   After the main ear and the mobile phone are disconnected for more than 5 minutes, the earphone automatically shuts down; after the main ear and the auxiliary ear are disconnected for more than 5 minutes, the auxiliary ear automatically shuts down;
4. The distance is disconnected.
   If the main ear and the mobile phone are beyond a certain distance, the connection will be disconnected; if the main ear and the auxiliary ear are beyond a certain distance, the connection will be disconnected;
5. Back connection status.
   The TWS connection state lasts for 20 seconds, and the Bluetooth status of the mobile phone is connected for 30 seconds. If there is no connection, the pairing state will be entered;
6. Synchronous display.
   IOS system, headphone power synchronization display; IOS system, mobile phone volume adjustment synchronization display;
7. Charge reset.
   When the earphone is charged in the charging box, the earphone is restored to the original state before the power is turned on;
8. Low power alarm.
   When the battery voltage of the earphone is lower than 3.3V, the low power prompts once every 20 seconds;
9. Low power shutdown.
   When the battery voltage of the earphone is lower than 3.1V, the earphone will automatically shut down;
10. Charging box battery capacity.
    3.7V/3200mAh (the charging box can be used to charge the headset for more than 30 times), the charging box can be used as an emergency mobile power source to charge the mobile phone and other peripherals (the MIRCO 5PIN charging adapter is equipped in the accessory);

Warning and precautions

1. To prevent fire or shock hazard, do not expose this unit to rain moisture.
2. Do not place this unit directly onto furniture surfaces with any type of soft, porous , or sensitive finish.As with any rubber compound make with oils , the feet could cause marks or staining where the feet reside.
3. Lithium batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should be incinerated since they might explode.

NOTE !
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead after several attempts to charge , please contact after sales-service center for support.Never disassemble the unit or attempt to remove the battery as that could cause leakage of an electrolyte substance.

Thank you for using this product, I wish you a happy life