Onn 6-Device Universal Remote

Model: 100008755

Need help?

We’re here for you every day

7 a.m. – 9 p.m. CST.

Give us a call at 1-888-516-2630

We’d love to hear from you. Scan with your Walmart app and let us know what you think

GETTING STARTED

Thank you for choosing the ONN Universal Remote Control. This remote control can operate a wide range of electronic devices, works across most brands and models, and comes pre-programmed to operate many Samsung TVs (see the Programming Your Remote sections if your device is not compatible). Your remote can control up to 6 devices and is remarkably easy to set up. To get started, please install two AA alkaline batteries (not included) as shown below.

BATTERIES

Installing the Batteries

1. Remove the battery cover.
2. Insert the batteries as shown.
3. Snap the battery cover back into place.

Battery Precautions

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Always remove old, weak or wornout batteries promptly and recycle or dispose of them in accordance with local and national regulations.

Low Battery Indicator

If while using the remote, the button’s red indicator light flashes 3 times, this indicates the batteries need to be replaced. Please replace the batteries as soon as possible when this indication occurs.

Code Saver

When changing the batteries of your remote, please do so quickly. You have up to 20 minutes to change the batteries in your remote without losing the programmed codes.

Battery Saver

To conserve battery power, the remote will automatically turn off if any button is pressed for more than 60 seconds (except during programming). This feature is helpful in the event that the remote is stuck in a location 10where the buttons remain depressed, such as between sofa cushions.

BUTTONS

NOTE: Some of the buttons on the remote may not support all of the functions of the original device remote.

What’s in the Box?

Check to make sure you
have everything below.

Get to Know Your indoor speaker

1. LED indicator
2. Power switch
3. Bluetooth
4. Volume down
5. Play/Pause/
   Speakerphone
6. Volume up
7. Microphone
8. Aux in
9. Reset
10. Charging port

Power

Long press to power on / off the speaker

Bluetooth® Connection

Activate the Bluetooth function on your
device and search Bluetooth devices,
then select “onn. Indoor SPK MD GRY”
to start connecting.

We’d love to hear from you. Scan
with your Walmart app and let us
know what you think.

Aux Connection

Use a 3.5mm cable (not included) to connect the
speaker to another audio source. Press Play on
the device and adjust the volume on the unit to
obtain the desired volume.

Answer calls

Short press to answer the call
Long press to reject the call

Party Sync Mode

Power on one speaker and hold Bluetooth
button 3 seconds to enter into pairing mode,
this device will be the master. The second
device will connect
automatically to the master when turned on.
After the two speakers are paired together, use
your mobile device to pair with the master
speaker utilizing the Bluetooth pairing method.

But Wait … There’s More!

The Party Sync Mode also applied to another
onn speaker.

Need help?
We’re here for you every day
7 a.m. – 9 p.m. CST.
1-888-516-2630
Give us a call!

The Fine Print

USER MANUAL INSERTS FOR FCC ID

1. Warning: Changes or modifications to this
   unit not expressly approved by the party
   responsible for compliance could void the
   user’s authority to operate the equipment.
2. NOTE: This equipment has been tested and
   found to comply with the limits for a Class B
   digital device, pursuant to Part 15 of the FCC
   Rules. These limits are designed to provide
   reasonable protection against harmful interference
   in a residential installation. This equipment
   generates, uses and can radiate radio
   frequency energy and, if not installed and used
   in accordance with the instructions, may cause
   harmful interference to radio communications.
   However, there is no guarantee that interference
   will not occur in a particular installation. If
   this equipment does cause harmful interference

43” 4K UHD TV Model: 100012584

*Roku, Roku TV and the Roku logo are the trademarks of Roku, Inc. All other trademarks and logos herein are the property of their respective owners.

What’s in the box

What you need

Installing the Stands

Do not install the stands if you want to wall mount your TV. See your wall mount instructions or chat live at www.onntvsupport.com. You will need: Phillips screwdriver (not included)

1. Place the TV screen-down on a clean, flat, soft surface (e.g.: blanket) to prevent scratches or damage to the screen.
2. Use a Phillips screwdriver to attach each stand with the provided screws.
3. Place the TV upright on a stable, level surface.

Roku 65″ 4K UHD TV

* ROKU, ROKU TV and the ROKU logo are the trademarks of Roku, Inc. All other trademarks and logos herein are the property of their respective owners.

What’s in the box?

Check to make sure you have everything below.

oon Roku TV

TV Stand

4 Screws

TV Remote

2 x AAA Batteries for Remote

Power cord

What you need:

Phillips Head Screwdriver

Wireless Router (needed for streaming)

Computer, Tablet, or Smartphone (needed for setup)

Internet Connection (needed for streaming)

1. Installing the Stands

Do not install the stands if you are wall mounting your TV. See your wall mount instructions.*

You will need: Phillips screwdriver (not included)

1. Place the TV screen-down on a clean, flat, soft surface (ie: blanket) to prevent scratches or damage to the screen.
2. Use a Phillips screwdriver to attach each stand with the provided screws.
3. Place the TV upright on a stable, level surface.
   

* Make sure the tilt angle between the TV screen and the vertical surface is no more than 15 degrees.

2. Grab your remote

Power your TV remote by inserting the included batteries carefully and matching (+) and (-) indicated inside the battery compartment.

A. Power
B. Back
C. Directional keypad
D. Channel recall
E. Rewind
F. Sleep
G. Home
H. Volume
I. View more options
J. Fast forward
K. Play/Pause

Visit go.roku.com/tvmanual for the complete Roku User Guide.

3. Connecting Devices

Headphone Cable 3.5 mm Audio Cable
Good Audio Quality
RESET
Reset to factory settings
Composite (AV)
Good Quality

LAN Port

Digital Audio Out
Better Audio Quality

Connecting to Power

After connecting all your devices, connect the power cord to a power outlet. The TV enters standby mode and its indicator light turns red.
*Actual placement of TV ports may vary by model.

4. Setup & Activation

Tip: Have your wireless network name and password handy.
Follow the on-screen instructions on your onn.TM ·Roku TV. If you aren’t ready to connect your TV to a wireless network, you can still use it as a regular TV.
Activate your onn.TM ·Roku TV using your computer, smartphone, or tablet to link to a Roku account. You need a Roku account to activate your onn.TM ·Roku TV and access entertainment across thousands of streaming channels.
Note: Roku doesn’t charge for activation support – beware of scams.

Endless Entertainment

Stream what you love, including free TV, live news, sports, and more. Never miss the most talked-about events, award-winning shows, latest blockbuster hits, and more. It’s easy to stream what you love and cut back on cable bills with access to 500,000+ movies and TV episodes across thousands of free and paid channels.*

*Payment required for some channels and content. 4K and HDR require 4K and HDR content which is not available on all channels and is subject to channel provider bandwidth. Channels are subject to change and vary by region.

onn AAABLK100024300 Bluetooth True Wireless Earbuds

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device.pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Opera­tion is subject to the following two conditions:

( 1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfer­ence that may cause undesired operation.

Warning: Changes or modifications to this unit not espressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Need help? We’re here for you every day from 7 a.m.-9 p.m. CST. Give us a call at 1-888-516-2630.
Produced for Walmart Inc.,
Bentonville.AR 72716

Get to Know Your Wireless Earbuds

1. Model: AAABLK100024300
2. Speaker Diameter: 7mm
3. Speaker Impedance: 32 Q ±15%
4. Sensitivity: 96±3dB at 1KHz
5. Speaker Driver Rating Power: 2mW
6. Charging Cable: 23cm
7. 20 hours of total playtime (with charging case)
8. IPX5 waterproof rating applies to the earphones, not to the charging case.

What’s in the Box

Check to make sure you have everything below

1. Earphones x1 pair
2. Charging case x1
3. Silicone eartips x4 pairs (M size installed), foam tips x1 pair
4. USB-C charging cable x1
5. Quick Start Guide

Let’s Get Started

First Time Setup

Step 1: Drop earphones back into charging case for initial activation and close the charging case to fully charge.

Step 2: Open the charging case, earphones will be powered on and go into pairing mode automatically, connect to your device by selecting “onn. TWS In-Ear”.

Power on/ Power Off & Pairing

Take them out to Power On automatically & connect to last paired device

Drop them back and close the charging case, Power Off automatically & disconnect to paired device

Tap & Hold 4 Secs Each Side for Power On/Off (If you are carrying the earphones without charging case)

Enjoy Your Music & Accepting a Call

In-ear detection

You can adjust volume through device

Charge Your Earphones

Earphones charging

Case charging

Onn Wireless Earbuds Manual

Get to Know your Wireless Earphones

1. Model: 100016495
2. Speaker Rated Input Power: 3mW
3. Speaker Diameter: 12mm
4. Speaker Impedance: 32O±15%
5. Sensitivity: 97±4dB
6. Type-C Charging Cable: 25cm
7. IPX4 Waterproof rating applies to the earphones, not to the charging case.

What’s in the Box

Check to make sure you have everything below

1. Wireless Earphones x1
2. Charging Case x1
3. Type-C Charging Cable x1
4. Quick Start Guide x1

01. Let’s Get Started

On/ Off & Paring

If you want to pair with another device, please turn Bluetooth off on your last paired device if it is nearby, then open the charging case cover for pairing.

02. Enjoy your Music

Both earphones with wearing detective, they will auto-pause music when you remove them from your ears, they will auto-play music when you wear them back.

03. Take a Clear Phone Call

04. Charge Your Earphones

Earphones charging

Case Charging

FCC Statement Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Need help? We’re here for you every day from 7 a.m.-9 p.m.
CST. Give us a call at 1-888-516-2630

Produced for Walmart Inc.
Bentonville, AR 72716

FCC ID: 2ADZH-ONN6495
FCC ID: 2ADZH-ONN6496

Information and Safety Instructions

Need help?

We’re here for you every day
from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630

Important Safety Instructions

• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC Warnings

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.
• Caution marking is located at the rear or bottom of the apparatus.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
• CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• WARNING: Shock hazard – Do Not Open.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Completely replace all old batteries with new ones.
• Batteries should be recycled or disposed of as per state and local guidelines.
  NOTE : Exposure to certain lasers can cause eye damage.

Model: 100011885

Introduction

Thank you for purchasing the  Android 10(Go edition) tablet with Google Play. Featuring a fast and responsive quad-core processor, this tablet is perfect for accomplishing everyday tasks, streaming music and movies, taking photos, checking emails, and engaging with social media.
The tablet offers 32 GB of internal storage, Bluetooth connectivity, a Micro SD slot for up to 128GB of additional storage, on-the-go productivity services. The following information will help you get the most out of your tablet. What You Should Know to Ensure Best Performance:

• Charge the battery completely before first use.
• While updates download in the background, tablet performance can be affected until completed.
• Close unused applications. Open apps that run in the background will affect overall performance.
• Battery Consumption:  laytimes on a fully charged battery will vary depending on your display settings, apps that remain open, and internet use (e.g., streaming video content).
• It is recommended to use a tablet screen protector and tablet case to protect the tablets.

In The Box

Tablet

User Manual

Quick Start Guide

USB-C cable

Charger

• Charger size:61*41*24mm
• Input: 100-240V~50/60Hz,0.3Output:5.0V 2.0A

1. Camera (Rear)
2. Reset
3. Power On/of
4. Volume Control
5. USB-C Port
6. Micro SD Slot
7. Earphone
8. Speaker
9. Camera (Front)

onn 100027829 Ergonomic Wireless Mouse User Guide

onn 100027829 Ergonomic Wireless Mouse User Guide

Before Use

Notes: All parts have to be unpacked and the packaging material has to be removed completely. Before use, verify the package contents are complete and undamaged.

BATTERY WARNING STATEMENT

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries.

System Requirements

• Windows® 7/8/10/11 or later, macOS® 10.5 or later, Android™ Chrome OS™
• Available USB port or Bluetooth® on your laptop or computer

What’s in the Box

• 1 Wireless Mouse
• 1 USB nano receiver
• 1 AA battery

Specification

• 6 Clickable buttons
• 5 adjustable sensitivity levels: 600/1000/1600/2400/3600
• Connect to up to 3 devices simultaneously with Bluetooth® wireless technology or a USB nano receiver (stores in the battery compartment when not in use)
• USB plug and play
• Scroll wheel
• On/oF switch
• Easy switch for changing connection: 2.4Ghz/Bluetooth® 1/Bluetooth® 2
• Windows, MacOS, ChromeOS, Android, iOS compatible
• 4.5 in L x 3 in W x 1.65 in H (11.4 cm x 7.6 cm x 4.2 cm)

Features

1. Left button
2. Right button
3. Scroll wheel
4. Forward
5. Backward
6. DPI Switch Button & LED indicator
7. USB nano receiver
8. Connect button
9. Battery cover
10. Easy-switch
11. ON / OFF switch

ONN Digital Clock Radio

ONN Digital Clock Radio

Model: AAABLK100008726

We’d love to hear from you. Scan with you Walmaapp and let us know what you think.

Information and Safety Instructions

Need help?
We’re here for you every day
from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630

Important Safety Instructions

• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• The mains plug is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
• Caution marking is located at the rear or bottom of the apparatus.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
• CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
• CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• WARNING: Shock hazard – Do Not Open.
• The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARDS. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• If the coin/button cell battery supplied with this product is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Completely replace all old batteries with new ones.
• Batteries should be recycled or disposed of as per state and local guidelines.

Overview

Power & Batteries

To power, the unit, plug the AC adaptor on the back of the unit into a standard power outlet.

To power, the unit using battery power, insert 2 AAA batteries (not included). The battery backup is intended for short power outages only. The clock radio’s primary functions cannot run on battery backup alone.

Note: Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.