OVSFBJPLG2A, OVSFBJPBK2A, OVSFBJPDB2A Ovela Jepson 2 Seater Sofa

COMPONENT

ASSEMBLY

STEP 1: Please assemble all the wooden legs.

STEP 2 : To use it as a sofa bed please open the bottom zippers and pull out the 4x metal legs. Close the zippers.

STEP 3 : To use it as a sofa seater, roll up the sofa end and pull up the sofa head like the diagram below.

The job is now complete!
In the interest of our environment please dispose of all packaging thoughtfully.

WARNING:

1. Read Instructions carefully Check no parts are missing.
2. Lay out all of the components on a soft surface as if you were preparing to do a jigsaw puzzle.
3. Carefully identify each component, especially those that are similar. The most common mistake is getting things back to front.
4. Separate and identify each component from the hardware pack and rest each one in its proper location before fastening.
5. Do not fully tighten screws (leave slightly loose).When the item is fully assembled tighten the screws – but do not over tighten.
6. If glue is required DO NOT set until you are certain that the parts belong together.

IMPORTANT WARRANTY INFORMATION

Your product has had a Long and adventurous journey. The packaging may Look Like it’s suffering from a little travel sickness, but your product should still be in perfect condition and ready to enjoy.
We recommend that you keep your original product packaging if at all possible because, in the unlikely event that you require a warranty repair, we cannot collect and transport your item if it is not safely or securely packaged.

For products that require a user manual, it can be downloaded from kogan.com/usermanuals/
If you need help using your product or for any other queries, please visit help.kogan.com

ovela Professional Mandoline Food Slicer Vegetable Cutter Julienne User Guide

Safety and Warnings

• Parts of this unit are very sharp. Extreme care should be taken to avoid injury.
• When using or cleaning the unit, do not directly touch the blade. Use of a cleaning brush is recommended to avoid contact with skin and subsequent injury.
• Children are prohibited from using the unit. Keep out of reach of children.
• Combined use of the fixed pin and safety pusher is required during use of the unit to avoid injury.

Overview

Operation

How to Use

1. Extend the anti-skid support from beneath the unit. (fig. 1)
2. Clip the grey section on the side of the pusher into the slot position if the unit. Before securing the pusher, ensure no foreign objects are in the slot. (fig. 2)
3. Pull out the thickness adjustment knob on the side of the unit. Rotate clockwise to adjust to desired thickness. (fig. 3)
4. Use the fixed pins to secure the food to the pusher. (fig. 4)
5. When securing long foods like carrots and cucumbers, it is suggested to use the plastic pins on the sides of the pusher to hold it in place. (fig. 5)
6. While holding the pusher, push forward to cut the food. (fig. 6)

How to Change Cutter & Pattern

1. Pull the ‘lift’ handle on the front of the unit upwards. (fig. 1)
2. Pull out cutter knob on side of unit and slightly rotate to the desired cutter and position. (fig. 2)
3. Adjust the cutter and pull the ‘lift’ handle back to the original position. (fig. 3)
4. Adjust thickness knob to level 1. (fig. 4)
5. Secure the food to the pusher with the pins.
6. While holding the pusher, push forward to cut the food. (fig. 5)

How to Shred

1. Use the shape-setting slider on the side of the unit to select the desired shape.
2. French fries: Adjust the thickness knob to level 4 and the shape-setting slider to ‘thickly-shredding’.                                                                                  
3. Shredded vegetables: Adjust the thickness knob to level 2 and the shape-setting slider to ‘thinly-shredding’.                                                                         

Cleaning & Storage

Removing & Reinstalling Fixed Pin

Press one hand on the grey section of the fixed pin, rotate the top white section with the other hand and remove and clean the fixed pin.

After inverting the removed grey section, align the grey pins with holes on the while uneven section and insert them. Turn the unit upright again. Insert pins on the remaining white section into these holes and slightly rotate to complete assembly of the fixed pins.

User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.kogan.com/usermanuals/

Fitted Electric Blanket
OVELBLKTSGB/OVELBLKTDQB/OVELBLKTKGB
User Manual

Attention
Please handle this product with care and inspect it regularly to ensure it is in good working order.
If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.

Electric Blanket layout

1. Fully fitted design with a skirt.
2. Dual controllers for Double/Queen/King sizes. Single controller for Single size.
3. Overheat safety protection.
4. 9 heat settings.

Safety Instructions

Important! Please retain a copy of these Instructions for future reference!

• Carefully read all instructions before operating the electric blanket, and save for future reference.
• Remove any packaging material and promotional/instructional stickers before using the Electric Blanket for the first time.
• This blanket should ONLY be connected to an Australian/New Zealand regulation 220-240V power outlet.
• Use this blanket as an under blanket only.
• Not recommended for futons or similar folding bed systems.
• This blanket is not recommended to be used on an adjustable bed. If used on an adjustable bed, check that the blanket or cord cannot be caught, creased, kinked or damaged in any way.
• Make sure that the heating area (with the wire elements) on any side of the bed does not hang over the sides of the mattress.
• Do not use this blanket with an infant, a sick person or anyone who is insensitive to heat.
• Only for human use. Do not use this device for pets.
• Overly extended use on a high setting can result in skin irritation or burns.
• Avoid sharp objects. Do not insert pins or any sharp objects into the electric blanket as they may damage the electrical wiring.
• Do not use pins – they may damage the electrical wiring.
• Do not use while folded or rolled.
• Do not tuck the blanket under the mattress.
• Do not use if the blanket is damaged in any way.
• Keep the control unit away from open windows.
• The flexible power supply cord and controller must, as far as is practical, be kept outside of the bed.
• Be sure that the electric blanket is installed so that at all times, the flexible supply plug is adjacent and accessible to the mains power outlet.
• Do not use the electric blanket if it is wet.
• Switch off at the power outlet and remove the plug when the blanket is not in actual use.
• This blanket must be kept in the fully spread condition at all times during use to avoid overheating. It is imperative that the blanket be frequently inspected to ensure that this condition is being maintained.
• Regularly inspect the electric blanket, power supply cord, plug and controller for any wear, damage or misuse. If signs of these are detected, immediately cease all use of the blanket.
• Bedclothes should not be folded back when the blanket is turned on. Do not leave heavy objects on the bed when the blanket is switched on.
• Arrange the blanket so that the heating wires are not below pillows.
• This blanket should not be used by persons who suffer from bedwetting.
• The blanket must not be used over or under a waterbed.
• If any abnormality or defect in the operation of the blanket is observed, discontinue it’s use immediately and contact the Kogan.com customer support team.
• There are no customer serviceable parts inside the blanket. The electric blanket is fitted with a specially designed controller, and no attempt should be made to repair it or replace the protective fuse
• When storing the electric blanket, allow it to cool down before folding.
• When storing, fold neatly but not tightly (or roll), in the original packaging without any sharp bends in the heating elements. Store where no other objects will be placed on it
• Do not dry clean this blanket. Cleaning liquids may have a serious negative effect on the insulation covering of the heating unit. It is recommended to follow the instructions for localized soiling or washing if soiling occurs. Please refer to the Care and Maintenance instructions.
• This appliance is for domestic use only. Not intended for medical use in hospitals.
• Avoid pressing creases into the appliance.

Important Safeguards for All Electrical Appliances

• Carefully read all instructions before operating the blanket.
• Fully unwind the power cord before use.
• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become tangled or knotted.
• To protect against electrical shock, do not immerse the power cord, power plug or appliance in water or any other liquids unless you are closely following the cleaning instructions when appropriate.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance, by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the blanket.
• Always turn the appliance OFF, switch off at the power outlet and then unplug the power cord when the appliance is not in use.
• Before cleaning, always turn the appliance OFF, switch off at the power outlet, unplug the power cord from the outlet and allow all parts to cool.
• Do not place the blanket on or near a heat source such as a hot plate, oven or heater.

Electric Blanket usage

Securing The Blanket
The blanket material must not be wider than the mattress with which it is intended to be used. It is normal for a small section of the fitted skirt to be showing on top of a larger-sized mattress. Ensure that the blanket is stretched completely flat when placed on the mattress and that any creases, tears, or other damage to the blanket are not apparent. No heating wire elements should be trapped or tucked into any parts of the bed. Ensure that the elastic of the blanket skirt is completely under the entire mattress and secure. Be sure to pass the controller and wiring through the apertures in the skirt section of the blanket. Ensure that when the blanket is fitted onto the mattress, the controllers and flexible power cord are outside of the bed and coverings, located in a position that will prevent any accidental damage to the housing and cords. Use this blanket only as under a blanket and do not use it above the occupant of the bed.
Fitted Electric Blankets
Place the blanket onto the mattress so that the skirt is visible and the controller is under the blanket, exiting through the skirt aperture. Ensure that the heating wire element section of the blanket is clear of your pillows.

Pull the elastic inside the fitted skirt over the ends of the mattress, and ensure that the middle of the blanket is evenly stretched and distributed over the entire mattress.

Operation and Controls
Your control features 9 heat settings, an auto-off timer, a boost function and an on/off slide switch. To switch the blanket on, move the switch in an upward direction, at which point the number 1 will be displayed. To switch the blanket off, move the switch in a downward direction.
The numbers on the electric blanket controller correspond to the following temperatures:
0 = No Heat
1 – 3 = Low Heat
4 – 6 = Medium Heat
7 – 9 = High Heat

The heat setting is illuminated to enable easy adjustment in the dark. To select your desired heat setting, use the UP and DOWN heat arrows.
Timer Operation
Your control has a timer feature that allows you to set the blanket to automatically switch off after 1.5 hours, 3 hours or 12 hours. When the timer switches off after the preset time, the number 0 will appear in the display screen. When you switch the control on, the unit defaults to heat setting 1 and 12-hour auto-off. To select your desired timer setting, simply press the timer button to scroll through the 1.5, 3, and 12-hour options.
Boost Function
The boost function is ideal for pre-heating the bed. When you press the boost button, the blanket will heat for 30 minutes at the maximum setting. When the boost function is activated, the letter H will be displayed on the screen. The heating of the blanket will revert to the regular heat setting after the 30 minute boost period. If the boost function is activated, it can be canceled by pressing the boost button again.

Note: on initial use, it is recommended that the blanket be used on setting ‘9’ for two hours before sleeping on the bed. This will assist in drying out any moisture which has accumulated in the mattress. You may notice an odor when using the blanket for the first time due to the insulation material being warmed in. This is harmless and will disappear quickly.

It is recommended that you do not sleep on the electric blanket when it is switched on. Should you choose to leave your blanket on for several hours, setting 1 can be used. Your blanket has a detachable controller and waterproof element which makes your blanket safe to machine washable.
Connecting the Controller
The blanket has a detachable controller and waterproof element which makes your blanket machine washable. Ensure the electric blanket controller is in the OFF position and is not connected to the power supply. To connect your controller, thread the detachable plug from the controller through the slot in the mesh skirt and plug it fully into the socket. Ensure that the locking clip engages with the plastic pin on the plug.
Detaching the Controller
The socket has a locking clip that engages with a small pin on the plug. Ensure the electric blanket controller is in the OFF position and not connected to the power supply. With the controller in the OFF position, push the clip out to release the socket pin and withdraw the connector plug by pulling it away from the socket.
Storing the Control Unit
Remove the controller when laundering your blanket. Store the controller safely in a dry, cool location during the summer months, while continuing to use the blanket on the bed as a comfortable under the blanket.
Dual Control Units
Your Double/Queen/King sized electrical blankets contain two controllers for individual comfort.

Care and Cleaning

Do not dry clean. Do not iron. Before cleaning, ensure that the controller is unplugged from the power supply and detached from the blanket.

Spot Cleaning

Sponge the affected area using a lukewarm neutral detergent or mild soapy solution. Follow this with a sponge using a clean water solution. Remove any excess water by compressing the wet area between absorbent towels.

Hand Washing

Immerse the electric blanket only in a lukewarm neutral detergent or mild soapy solution. Soak for five minutes, remove from the solution and gently squeeze the solution through the electric blanket. Rinse the blanket thoroughly in clean lukewarm water, gently squeezing and draining excess water from the electric blanket.

Machine Washing
Your electric blanket can be washed in a domestic washing machine (size permitting) or in a commercial laundry. To wash your blanket in a domestic washing machine, wash on the WOOL or DELICATES setting, using a neutral wool detergent or mild soapy solution. DO NOT wash on a hot cycle. The water temperature must be kept below 40°C. Do not use high speed or extra spin cycles. Do not machine wash with the control unit connected to the blanket.
Drying
Drape the electric blanket across a clothesline and drip dry. DO NOT use pegs to secure the electric blanket in position. DO NOT dry with a hairdryer or heater.
Tumble Drying
You may tumble dry the blanket on LOW setting for 15 minutes MAXIMUM. Smooth the blanket by gently pulling any creases out of the fabric. Do not dry with the controls attached to the blanket.
Storage
When not in use, pack the electric blanket in its original packaging for best protection, then store in a dry, cool, and clean location Avoid pressing sharp creases into the blanket and store where no objects will be placed on it. Detach the controls from the blanket when storing.
If you have any further questions regarding the use of this product, please contact the Kogan.com customer support team.

Heated throw
User manual
OVELTHROWBB & OVELTHROWGB

Attention

SAFETY & WARNINGS

We believe that safe performance is the first priority in any Consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.

Important Safeguards For Your Heated Throw

• Carefully read all instructions before operating the heated throw and save for future reference.
• Remove any packaging material and promotional stickers before using the heated throw for the first time.
• Use the heated throw only with the detachable controller BPC140 provided. Refer to the markings on the heating unit for the model number of the controller.
• Connect only to a 230V or 240V power outlet.
•  Do not pull the heated throw by the flexible cord or use the cord to carry the heated throw. Do not attempt to expose internal wires.
• Extended application at the high setting may result in skin irritation or burns.
• Do not use on areas of sensitive skin, or areas that are insensitive to heat.
• Do not use the heated throw on an incapacitated person, an infant, or a person who is insensitive to heat.
• The heated throw is not to be used on or by a sleeping or unconscious person, or a person with poor blood circulation or someone unable to remove the blanket themselves unless carefully attended.
• This appliance is to be used as a wrap only.
• This appliance is not to be used as an electric blanket or used over another blanket.
• This appliance is not intended for medical use in hospitals.
• This appliance is for household use only.
• Do not use this appliance for anything other than its intended use. Do not use outdoors.
• Avoid sharp objects. Do not insert pins or any sharp objects into the heated throw as they may damage the electrical wiring.
• Do not use the heated throw in a folded, tucked, or rolled state.
• Do not insert pins.
• Do not use with wired area tucked in.
• Do not sit on, crease or crush the heated throw.
• Do not use the heated throw if it is wet.
•  Do not use under clothing, wraps, or blankets.
• Do not use the heated throw as an electric blanket. It is not designed for all-night use.
• This heated throw must not be used over a water bed.
•  If any abnormality or defect in the operation of this heated throw is observed, discontinue use immediately and consult with the Kogan.com customer support team.
• Do not fall asleep when using the heated throw. This product is not intended for use while sleeping.
• Do not use the heated throw for animal or pet care.
•  Switch the heated throw control to the ‘Off’ position – switch off at the power outlet – and remove the plug from the power outlet when the heated throw is not in use and before storing.
• Do not dry clean the heated throw. Dry cleaning may have a detrimental effect on the heated throw. Follow the instructions in the care and cleaning section when cleaning and storing the heated throw.
• Regularly inspect the heated throw, power supply cord, plug, and controller for any wear, damage, or misuse. If signs of these are detected, immediately.
• Cease use of the appliance and return the entire unit to the place of purchase.
• It is recommended that a qualified and registered person inspect your heated throw after every 3 years of use.
• When storing the heated throw, allow it to cool down before folding.
• When storing, fold neatly but not tightly (or roll) in the original packing without sharp bends in the heating element and store where no other object will be placed upon it.
• There are no customer serviceable parts inside. The heated throw is fitted with a specially designed controller and no attempt should be made to repair it or to replace the protective fuse.

Important Safeguards For All Electrical Appliances

• Fully unwind the power cord before use.
• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have concerning the use of the appliance by a person responsible for their safety.
•  Children should be supervised to ensure that they do not play with the appliance.
• It is recommended to regularly inspect the appliance. To avoid a hazard do not use the appliance if the power cord, power plug, or appliance becomes damaged in any way. Contact the Kogan.com customer support team.
• Any maintenance other than the cleaning should not be attempted.
• This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use it in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
• The installation of a residual current device(safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

PRODUCT FEATURES

CONTROLLER

1. Machine washable and tumble dry throw rug.
2.  Microfible fabric for extra warmth and comfort.
3.  Auto-off safety protection will heat for up to 10 hours, and after this time the heated throw will automatically switch off. (not shown)
4. Flexible heating wire allows for the fabric to drape around you.
5. Waterproof control socket and heating element, safe to machine wash and tumble dry (not shown)
6. The detachable controller is easily removed from the heated throw socket so that the heated throw can be washed.
7. Digital control button with 9 heat settings for choosing the ideal controlled warmth.
8.  Illuminated LED indicates the heat setting selected.
9. The red indicator lamp indicates that the heated throw is connected to the power outlet and the switch is in the ‘ON’ position.
10. ON/OFF slide switch.

QUICKSTART GUIDE

USING YOUR HEATED THROW

BEFORE FIRST USE
Remove any promotional material and packaging from the heated throw.
Your climate control heated throw can be safely used on any part of the body, although
the advice of a doctor should be obtained if you are in any doubt.

TURNING YOUR HEATED THROW ON
Ensure the detachable controller is connected to the heated throw. Plug the cord into a 240V power outlet and switch the power on.
To turn on the heated throw, slide the control switch to the ‘ON’ position. The red indicator lamp will illuminate and the display will show a setting “O”.

SETTING THE HEAT TEMPERATURE
Adjust the temperature by pressing the digital control button to choose a heat setting between 1-9. This can be achieved by continuously pressing the “SEAT HEAT” button until the desired setting is reached (depending on personal requirements and warmth required).
Allow 10-20 minutes for the digital heated throw to reach operating temperature.
The climate control heated throw has nine customized heat settings operated by a push-button on the detachable controller.
The nine settings allow you to choose the right balance of heat depending on your personal requirements.
The numbers on the digital display correspond to the following temperatures:
0 = No heat
1-3 = Low Heat (recommended for continuous use)
4-6 = Medium Heat
7-9 = High Heat
If the heated throw is misused (by folding, etc) then the throw will turn off and the numeric display will flash with the number “0”. The heated throw must then be switched off and allowed to cool before turning on again.
To turn the heated throw-off, slide the control switch to the ‘OFF’ position. Switch the power off at the power outlet and remove the plug.
NOTE: Do not leave the heated throw in contact with the skin for excessive periods of time.

AUTO-OFF SAFETY PROTECTION
The heated throw has auto-off Safety Protection and will heat for up to ten hours. After this time, the heated throw will automatically switch off and the digital display will flash with the number “0”. To continue to use the heated throw, switch and turn the heated throw on again .

SMART WIRE CLIMATE CONTROL
Your heated throw features Smart Wire Climate Control which senses the surrounding temperature and adjusts the heated throw temperature according to provide you with added comfort and safety.
This innovative technology automatically regulates the temperature of the heated throw so there is no need to constantly make adjustments to the level of the heat required.
Smart Wire Climate Control provides the additional benefit of keeping your safety in mind by preventing the heated throw from overheating if it is misused (by folding, etc).
If the heated throw is misused, the heat to the heated throw will turn off and the numeric display will flash with the number “0”. The heated throw must then be switched off and allowed to cool before turning on again.

CARE AND CLEANING

REMOVING THE DETACHABLE CONTROLLER
The heated throw is suitable for washing; however, the detachable controller is not.
Therefore, it is essential that the detachable from the heated throw socket prior to washing.
Step 1
Slide the control switch to the ‘OFF’ position, switch off at the power outlet, and remove the plug from the power outlet.

Step 2
The heated throw socket has a tab that forms a lock with a small pin on the plug of the detachable controller. To remove the detachable controller, pull back the tab to separate the pin from the lock (see Fig .1).
While the tab is being pulled back, pull on the plug of the detachable controller so that it is completely separated from the four prongs in the socket (see Fig .2). Once the detachable controller is removed follow the care instructions for washing.

Step 3
To replace, reconnect the detachable controller, and reseal the tab ove the plug.

WASHING INSTRUCTIONS – HEATED THROW
Once the detachable controller is removed, (see Fig .2) the heated throw may be hand or machine washed on a delicate setting. It may be line or tumble dry on low for a maximum of 15 minutes.
DO NOT twist or wring dry. DO NOT bleach, dry clean, iron, use mothballs or sprays, or pegs when line dried.

STORING
Lay the heated throw flat or fold loosely when storing. Do not fold tightly. Do not store when wet. Store in a dry place away from dust or oil.
WARNING: Never immerse the detachable controller in water or any other liquid.