MOVEMENT INSTRUCTION

Features

• 13 LCD Display, Display Hour, Monte, Second, Month, Day, Year and Week
• Automatic Calendar (2000-2099)
• Dual Time P 12 / 24H format selectable, Auto Calendar
• Daily Alarm, Chime hourly and SNZ
•  1/100 served to 23 hour 5999 second Chronograph with split functions, 12 groups of LAP segment timing
• Countdown function
• EL backlight
• Touch-tone

Operational Manual

1. At any mode, press A key EL backlight for 3s.
2. Press B to change the display mode
3.  In real time mode press D key to switch 12 hours or 24 hours display.
4.  Real Time and date
    Time Setting
   a). Press and hold C key for 2s to time setting mode and “Second” flashing, Press B key to select item as
   following sequence :

b). Press D key while the seconds are in the range of 30 to 59, resetting them to 00 and adding 1 to the minutes .While the seconds are in the range of 00 to 29,the minutes won’t be changed.
c). Press D key to adjust the value increment, hold down D key to quickly adjust.
d). Press C key to return to Real Time Mode.
e). In setting mode. 1 minute No key operation automatically exit setting, return to real time display mode.

Dual Time Mode

•  In the real-time mode , Press B key 3 times to enter Dual Time Mode, Press and hold C key for 2s to select ” Hour ” setting, Press B key to select ” Minute ” setting,
• Press D key to adjust the value increment, hold down D key to quickly adjust.
• Press C key again to finish setting ,and return to Dual Time displaying mode .
• In setting mode. 1 minute No key operation automatically exit setting, return to Dual Time displaying mode .
• The second of Dual Time is the same as real time

Daily Alarm

Turn On / Off Alarm, Chime and Snooze

a) In Alarm mode ,Press D and then Press C key to turn on/off Alarm ( ) ,
b) In Alarm Mode, press C to turn on/off hourly chime( ) and snooze(“SNZ”)

Alarm Mode:

• In alarm mode, press and hold C key for 2 seconds to enter the alarm time setting state, then press B key to select the setting items as follows:

• Press D key to adjust the value increment, hold down D key to quickly adjust.
• Press C key to return to Alarm Mode.
• In setting mode. No any key operation then will back to alarm display mode automatically after 1 minute.

Remarks:

• When you need a daily alarm, do not enter a number at the bottom of the screen. Please set it to “- – – -“.
• When you need a specify month alarm, you need to enter the number “12- – -” at the bottom of the screen.
• When you need a specify day alarm, you need to enter the number “- – – 30” on the bottom of the screen.
• When you need a specify date alarm, you need to enter the number, such as “12-30” at the bottom of the screen.
• When Alarm is ON, the BB-BB – ring sounds for 10 seconds, the alarm when the screen symbol “” flashing, press any key to stop.

Snooze function:

• In the Snooze function, The symbol “SNZ” is still flashing on the screen when the alarm stopped , snooze rings every 5minutes,total ring 6 times.
• When the snooze is ringing, press any key is to stop all the after snooze function.

Chronograph mode

1. The measurement range of the chronograph is 23 hours 59 minutes 59.99 seconds, when reach the maximum, the chronograph re-count from “0”
2. Chronograph LAP segment timing can remember 12 groups.

When running the Chronograph:

• Press D key to Start/Stop running ;When stop, press C key to zero.
• When running, press C key to split counting. Press C key again to next LAP split counting.
• In the split counting, press D key to stop counting ,Press C key to view the memory mode, press C key again to continue to view the next memory.
• When exit split count, hold on C key for 2 seconds to zero.
• When running, press B key to return to Real Time mode, and it runs at back.

Countdown mode

• The display range of the timer is 1 minute to 23hour 59minute.

In the countdown mode

• Press and hold C key for 2s to time setting mode and “Seconds” flashes. Press B key to select “Hour” , then Press B key “Minute” setting.

• Press D key to adjust the value increment, hold down D key to quickly adjust.
• Press C key to confirm, press B key return to the real time mode.
• In setting mode. No any key operation then will back to countdown mode automatically after 1 minute.
• Press D key to Start/Stop counting. Press C key for 2s to starting value when stop counting.Press C key
  for 2s again back to the setting mode.

• When the countdown stop to zero, the BB-BB – ring sounds for 15 seconds, press any key to stop the ring, when the ring stop, the countdown time will automatically return to the initial setting time.

Specifications

•  Module Size ：Ф37.2mm
•  Module Thickness（include buzzer） ：9.2mm
•  Operational Temperature Range：-10℃~+60℃
•  Operational Voltage: 3.0V
•  Accuracy ：±45sec/month
•  Battery Code ：CR2025(capacitance: 170m Ah)
•  static average current ： ≤1.5u A (static maximum current ：3.5 u A)
•  Alarm average current ：≤2m A （Alarm maximum current ：5.0m A)
• Model：CRH123
• EL lighten average current
• Battery life (85%) Battery life calculate according to EL lighten four times each day for 3 seconds each time , alarm for 60 seconds each day）

D21 Bluetooth Heart Rate Wristband Instruction

Product Specification

Chip model: nRF51822 nRF51822( Cortex M0 16MHz)
Memory: 256K
Acceleration sensor: Three-axis acceleration sensor
Heart rate sensor: Green light static heart rate sensor
Display: OLED 0.66’’ 64×48 Dots
Motor: Cylindrical vibration motor
Key-press: Touch key
Battery: 80mAh

Notice:
The wristband contains magnatic component, he who is installed a pacemaker, or have implanted electronic devices, or metal, please do not use it. Please stop using it when any discomfort symptoms happen. If use substandard charging power supply, will shorten the battery life, and even damage the battery.
We reserve the right to modify the User Manual without any notification. It is normal condition if some functions differs from different app versions. We reserve all the right for the final explanation .

Turn on/off the Wristband

1. Long press the touch key for 4 seconds, users see the Welcome interface. It is touch key, please do not press the key with strong pressure.
2. Short press the key to enter to the Device Management interface with power off icon at the top-left corner. Then long press the touch key to turn off the wristband.
3. Long press to choose the function and short press to switch the functions

Charging

Charger: voltage 5V, electric current 500MA-1000MA
Charging time: 30 minutes.

Connect the chrger with wristband as below.

Time

1. Battery power display
2. Date Display
3. Time Display

Heart Rate Interface

1. Heart Icon,long press the icon to start testing with beating.
2. Display the real time heart rate.

Notice: The heart rate testing data can not be used as medical data. The time will a little longer for the first timetesting ,it is normal.

The best wearing manner:

1. keep a finger width between the wristband and ulna
2. keep the heart rate sensor clinging to skin

Pedometer

1. Pedometer Icon
2. Display the real time steps

Distance Interface

1. Distance icon
2. Display the whole distance according to the pedometer

Calories Display

1. Calories icon
2. Display the real time calories

Palming bright screen

1. long press the touch key to turn on/off the function

Device Management

1. Turn on/off icon, the wristband can only be turned off in this interface in case of the wrong operation.
2. Battery power icon
3. Bluetooth connection icon, this icon means Connected this icon means Disconnected
4. Bluetooth name DFit
5. The last four letters in the MAC address is used for distinguish each wristband. For example as above picture, the Bluetooth name is Dfit EEF2 found by App.
6. Software serial number :V1.80

APP download

Please scan the QR code below to download HPlus
Watch APP,

Google play
App for foreign Android users

iOS
App for ios users

1. Aftet HPlus Watch APP Installation completed, please fill up your information such like Height、weigh、age、gender etc.
2. Wristband connect with APP;
   Click Bluetooth Device in the System Setup to enter the interface, pull the screen from the top to bottom. Search and find the Bluetooth name, then click and connect wristband.
   After connection, the date and time on the wristband will be updated automatically.
   
3. Data graph
   After connection, total distance,total steps, total calories, Min heart rate, average heart rate, max heart rate, yesterday data and data summary will be shown on the ap interface.
4. Real time Heart rate
   Start heart rate testing,it can record your heart rate for whole day.
5. Settings
   Used to set up all functions on ap.
   a. Bluetooth, used to connect wristband Bluetooth
   b. Sync, used to sync wristband date
   c. Incoming calls, when you turn on the function, the watch rings and vibrate with icon remind.
   d. Time reminder: Alarm clock, when you turn on the function, wristband will remind you regularly.
   e. Sit notification, when you turn on the function, the watch will remind you to do some exercise.
   f. Screen save timer, used to set up the time for screen bright.
   g. Erase user data, used to erase the historical data in the wristband.

Warranty Card

8 digital Operation Manul

Features

• 8 Digits LCD Display，Display Hour ,Minute ,Second ,Month ,Day and Week
• 2 Alarm and Chime hourly
• Dual Time
• Timer
• 12 / 24H format selectable
• 1/100 second Chronograph with split functions
• EL backlight

Operational Manual

Real Time

• Use the Real Time Mode to set and view the current time and date.
• In the Real Time Mode. Press D key to view the current date, Release D key will return the Real Time Mode
• To set the time and date:
  a). In the Real Time Mode. Press C key until the “Seconds” start to flash, which indicates the setting screen.
  b). Press B key to move the flashing in the sequence shown below to select other settings shown.c). When the setting you want to change is flashing, press D key to change it as described below. d).The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

Chronograph

• The display range of the Chronograph is23hour,59 minutes, 59.99seconds.
• The stopwatch will be count to max. values and restart from zero until you stop it.

To measure times with the stopwatch

Daily Alarm

• Alarm Operation: The alarm tone sounds at the preset time for about 15 seconds. Pressing any button stops the alarm tone operation.
• Turn On / Off Alarm and Chime, Press Ｄ key to turn on/off Alarm or Chime.
• Alarm setting :In the Alarm Mode, press C key until the Hour setting of the alarm time starts to flash, Press B key to select “Hour “、”Minute “or ”alarm1/alarm2” setting, Press D key to adjust the flashing item, Press C key to confirm.

Countdown Timer

• The display range of the timer is 23hr 59min,59sec.
• Timer alarm sounds for about 10 seconds when counting down to 0:00:00.
• Timer Time setting
  Press and hold Ｃ key f to time setting state and “Hour” flashing , Press B key to select “Hour” or “Minute” setting ,Press Ｄ key to adjust the flashing item, Press Ｃ key to complete setting.
• Timer operation
  Press Ｄ key to Start/Stop counting .

Dual Time

• Dual Time setting
  In the Dual Time mode, Press and hold Ｃ key to select “hour” setting, Press Ｄ key to adjust the flashing item, Press Ｃ key again to finish setting, and return to Dual Time displaying mode.

Specifications

• Module Size ：36.2mm
• Module Thickness ：9.30mm
• Operational Temperature Range ：0℃~50℃
• Operational Voltage ：3.0V
• Accuracy ：±90sec/month
• Battery Code ：CR2025（content：170mAh）
• Current Consumption for Digit（maxima）
• Current Consumption for Digit（averagely）
• Alarm Current ：≤3.5u A(T=25℃)
• EL Current
• Battery life  2 backlight operation (6 seconds) per day
  20 seconds of alarm operation per day

Operating instructions

In normal mode model

Display: Week- Hours -Minutes – Seconds

Press S1 show Month and Date

Press S2 button to show Alarm Hours and Minutes

Modes Covert : Press S3

Backlight: Press S4 (seven kinds color backlight)

12/24H format

Modes of watch

Chronograph function

Chime of every hour ON/OFF

In normal mode hold S2 and then tap S3, if all icon of week ON means Chime ON, otherwise means OFF.

Alarm ON/OFF

In normal time Mode, hold S1 and S2 to ON/ OFF Alarm

Alarm Setting

In normal time Mode,tap S3 twice enter into Alarm setting mode,and the Hours flashing
Tap S1 to adjust correct hour of your alarm. Pay attention to AM/PM
Tap S2 the Minutes will flash. Tap S1 to adjust correct minute of your alarm
Tap S3 to save / exit.

Time & Date setting

In normal time Mode, tap S3 three times to enter Time&Date setting mode and Seconds flashing.
Tap S2 and the Minutes will flash, tap S1 to adjust correct minutes (Pay attention to AM/PM, “H” is 24 hour format)
Tap S2 and the Hours will flash. Tap S1 to reach the correct hours
Tap S2 and the Date will flash. Tap S1 to adjust the correct date
Tap S2 and the Month will flash. Tap S1 to adjust the correct month
Tap S2 and the Week will flash. Tap S1 to adjust the correct week (MO=Monday, TU=Tuesday …)
Tap S3 to save / exit.

Backlight setting

Hold S4 will show all kinds of colors backlight from

Just stop hold the button, last color of will be memorized to set as current back light color

Instruction

Functional

Month-day-week- hour -minute – second 12H

Analog set: hold S1 to adjust the analog quartz

Back-light: press S3

Mode covert : press S4

Time & Date setting

In normal mode:

Press S4 three times enter into setting mode ,at same time the “seconds” flashing;
Press S2 once ,and the “minute “flashing ; press s3 to adjust minutes
Press S2 once ,and the “hour ”flashing; press s3 to adjust hour.
Press S2 once ,and the “day” flashing; press s3 to adjust day.
Press S2 once ,and the “month “flashing ; press s3 to adjust month.
Press S2 once ,and the “week” flashing; press s3 to adjust week.
After set all the data, press S4 to exit.

Alarm setting

Hours: In normal display Mode, S4 twice and “the hours” flashing press S3 to adjust hour of the alarm. Pay attention to AM/PM

Minutes: press S2 and the “minutes” flashing. Press S3 to adjust minutes.

Alarm ON/OFF

In normal display Mode, hold S3 and S2 ,if display “alarm symbol” means turn on the Alarm, otherwise means turn off the Alarm function

Chime ON/OFF

In normal display Mode, hold S4 and S2 ,if all icon of week appear means Chime ON, the same action, if the week’s icon disappears, means OFF of the Chime.

Chronograph

In normal display mode: press S4 once , enter chronograph mode , press S3 to start, press S3 to suspend,
press S3 to continue ,press S3 to stop, press S4 twice to read the record . Press S2 to return to chronograph mode
(0:00 00)section ,The same action continue recording the second record.

Operation Manual

A. Features

• 12 Digits LCD Display, Display Hour, Minute, Second, Month, Day and Week
• Daily Alarm and Chime hourly
• 12 / 24H format, Auto Calendar
• 1/100 second Chronograph with split functions
• LED backlight

B. Operational Manual

• In any Mode Press A Key for LED light ON for 3s
• Press B key to convert the mode as following:

Chronograph function

In normal display mode: press B key once, enter Chronograph mode.

• Press D to start, press D again to suspend, press D again to continue, press D to suspend again,……when
  suspend, press C key back to 0:00:00.
• In Chronograph mode, press D key to start, press C key enter into split function. press C key again to get the first group record ,but the second group still processing in the back ground, press C key again to continue the second group, press C key again to read the second group record……when the final group finished, Press D key to stop the SPL function, press C key read the final group(SUM) record, press C key again to clear the record to zero.

Alarm Setting

• In normal display Mode, press B key twice to the Alarm mode
• Press C key the Hours will flash, press D key the adjust the Alarm Hours.
• Press C key again the Minutes will flash , press D key to adjust the Alarm Minutes
• Press B key to exit.

Alarm & Chime ON/OFF

In normal display mode press B key twice enter the alarm mode, press D key for Noise and ON/OFF the Alarm and Chime function , If only “ALM” icon means when the time is alarm time will chime, if only “CHM” icon ON means every Hour will chime, if the two icon ON means in alarm time and every Hour will chime.

Time & Date Setting

In normal display Mode, press B key three times to enter time setting mode and the icon of seconds will flashing. Press D key to zero.

• Press C key and the icon of Hours will flash. Press D key to reach the correct Hours
  (Pay attention: AM/PM, “H” is 24 hour format)
• Press C key and the icon of the Minute will flash. Press D key to reach the correct Minutes.
• Press C key and the icon of the Month will flash. Press D key t o reaches the current Month
• Press C key and the icon of the Date will flash. Press D key to reach the current date
• Press C key and the icon of the week will flash. Press D key to adjust the day
• Press B key to exit.

Operation instruction

A. Features

• 12 Digits, Hour ,Minutes ,Seconds ,Month,Day and Week
• Daily Alarm and Chime hourly
• 12 / 24H,Auto Calendar
• 1/100 second Chronograph with split count
• EL backlight

B. Operational Manual

• At any station , press A key , the EL back light on for 3 seconds.
• Press B key to convert MODE:

Chronograph functions

In normal display mode: press B key once, enter Chronograph mode

• Press D to start, press D again to suspend, press D again to continue, press D to suspend again,……when
  suspend, press C key back to 0:00:00.
• In Chronograph mode, press D key to start, press C key enter into split function, and the “SPL” symbol appear, press C key again to get the first group record ,but the second group still processing in the back ground, press C key again to continue the second group, press C key again to read the second group record……when the final group finished, Press D key to stop the SPL function, press C key read the final group(SUM) record, press C key again to clear the record to zero.

Alarm & Chime ON/OFF

• In normal mode, press B key twice to enter to Alarm Mode, Then press D to ON/OFF “ALM” /“SIG” function.
• If “ALM/SIG” symbol appears , means ALM/SIG function ON, otherwise means OFF
•  “ALM/ ” appear means ALARM Function ON.”SIG/CHI/ ” appear means HOURLY CHIME function ON

Alarm setting

• in normal Mode, press B twice to enter Alarm mode and press C then “Hours” flashing
• Press D to adjust “Hour” for your Alarm. Pay attention to AM/PM
• Press C then “Minutes” flashing, Press D to adjust “Minutes” for your alarm . Press B key to exit.

Time & date setting

In Normal Mode, press B three times enter into setting mode and the “Seconds” flashing, Press D to zero.

• Press C the “Hours” will flash. Press D to adjust “Hours”
• Press C the “Minutes” will flash. Press D to adjust “Minutes”.
• Press C the “Month” will flash. Press D t o adjust “Month”
• Press C the “Date” will flash. Press D to adjust “date”
• Press C the “Week” will flash. Press D to adjust “Day”
• Press B key to exit.

Bozlum B36 Instruction Manual -
Skmei H Band Smartwatch

Wearing method

Specification parameter

PRODUCT USE STEPS

Download APP on Mobile phone

APP download: Search for “H Band” on “Google Play” and “App Store” or scan the below QR code to download the app ;

(APP is compatible with Bluetooth 4.0, Android 4.4, iOS8 or higher system.)

Registration

When a new user registers or has no account to log in, the app will automatically guide the user to select skin color, personal information and so on. To ensure the accuracy of the test data, users should choose the color which is similar to their own skin color, fill in the correct age, height and other personal information, to avoid error in the heart rate test data. (shown as below)

Activation and binding

1. Power on: in the power off state, long press the touch area (under watch glass mirror), 5S to power on.
2. Open the phone Bluetooth, APP will automatically guide you to bind the watch when you enter “H Band” at the first time or click “click to connect device” on the main interface.  Remark:
   Bind device: On the APP side, if there is an account login, open the “Bind Device” switch, and it will be uploaded data of two days ago and now. If there is no account login, even the function is open it will not upload data.

APP, watch interface and functions

• Female physiological period management
  1. Personal information gender setting is “female” user when using “H Band” at the first time . After connecting the watch, the “H Band” will prompt you to set the female cycle function: only the menstrual period, preparing pregnancy period, pregnancy period, and mother period. Then enter the corresponding sub-menu to select the corresponding basic information. (shown as below)
  2. The female function notification can be turned on or off on the device through the “H Band” notification bar setting; During women menstrual periods, the main interface of the watch will display four status icons, (shown as below)
  3. APP data interface:
     • Data panel displays steps, sleep, heart rate, female, etc., enter the detailed record interface by clicking any graphs on data panel. (When the APP personal information gender setting is “male”, the data panel has no display. This function is only for “female”. To view more content, swipe up and down the data interface .
  4. “Female” data panel shows physiological status (shown as below)
  5. Click the icon in the upper right corner of “female” to display or hide the text, which can hide the user’s physiological privacy. Click the physiological status center area to enter the calendar record interface.(shown as below)
  6. During women menstrual periods, there are four states:
  7. Preparing pregnancy period
     In the state of pregnancy, there are also the menstrual period, ovulation period, etc., but it shows the probability of pregnancy in the current state. Example: Pregnancy probability <1%, safety period.
  8. Pregnancy
     In the state of pregnancy, it shows that “There are still ? days from the birth of the baby.”
  9. After filling out the personal information on APP, the calendar record interface shown as right side, in which the pink dates are the predicted menstrual period (the menstrual period based on the data you filled in), the purple dates are the ovulation period, and the purple circle date is the ovulation day. The black dates are the safe period, and the cyan circle date is the currently selected date (the default is today). Support today is “25th”, when menstruation comes today, open the “menstruation start” switch to record.
  10. The system will mark 8 days including “25” as the menstrual period according to the information you filled in (shown as below).
  11. Suppose today is the “27th”. It has been 6 days since the menstruation start date “22nd” and you find that the menstrual period has ended, so you can open the “end of menstrual period” switch. The effect as below:
      Notes:
      Modify menstrual and watch notifications
      1. Only modify the relevant information from the last menstrual start date to today on the calendar.
      2. Can modify the start date of the menstrual period, the end date of the menstrual period, but not the date of pregnancy.
      3. The watch notification bar can turn the set female notifications on and off.
• Introduction to the functions of watch:
  First, enter the main interface , long press to view the device info such as Bluetooth address and software version. On the “H Band” app of the “Main Interface Style Settings”, there are a variety of device main interfaces to switch.
  1. Sports mode (shown as below)
     1. Press touch button to sports interface ① , and long press 3S to enter sports mode. (There are four interfaces in the sport mode, the main interface of sports mode ② , continue interface ③ , pause interface ④ , and exit interface ⑤ ).
     2. Main interface of sports mode ② begins to record the duration of exercise, steps counting, calories, and exercise heart rate. If there is no operation in 6S at this interface, it will automatically return to the main interface and the screen is off after 1S. When turning it on again or wrist-up display light, the display remains in the main interface of sports mode ② .
     3. Switch to the continue interface ③ with a single touch, long press 3S to pause sports mode on the interface. At this time, the device vibrates and displays the pause interface ④ . Long press 3S pause interface ④ , and the sports mode returns to work.
     4. Click and switch to exit interface ⑤ , long press 3S to exit the sport mode, and the motion data is cleared.
  2. The index of the watch interface, shown as below:
     1. Press touch button to step counter interface (1) to display the current number of steps. The user can set steps goal through the APP. When step goal is reached, the display shows ，vibrates 3 times, and the defaults of steps goal is 10000 steps.
     2. Press touch button to the distance interface (2) to display current distance.
     3. Press touch button to the calorie interface (3), showing the current consumption of calories.
     4. Press touch button to the heart rate interface (1) and start measurement. Show the heart rate date after about 20 seconds. The screen will be automatically turned off after 60 seconds. You can always pay attention to your health status according to your heart rate.
     5. Press touch button to the sleep interface (5), the sleep time of last night is displayed.
     6. Power off: Press touch button to the power off interface (6), long press 5 seconds to power off.
        [To save power, there is no operation in any interface in 6S, it automatically turns off the screen.]
• APP function settings :(shown as below)
  Settings > My Device > B36 > Click to enter
  Message reminder: Call, SMS, WeChat, WhatsApp, Facebook, Twitter, Line, Instagram, Snapchat, Skype and other message reminder. After connecting APP with the Bluetooth of the watch, you can open the reminder option tool and mobile phone notification center permission. It vibrates to remind in the state of connection.
  1. Instant Social Message reminder:
     Social apps such as WeChat, WhatsApp and Facebook, when receiving message, it (WeChat ① as an example) displays the name and content and vibrates once(message reading is based on the trigger button. If the message is not read and the screen is off, it is unread. If there are unread messages, trigger button, reads the message, and then back to the main interface.
  2. Call reminder:
     After connecting APP with Bluetooth of the watch, when there is a coming call on mobile phone, the phone number or caller’s name (if saved in mobile phone address book) and the caller icon ② are displayed, and the device will vibrate, and the single touch can silence the mobile phone ③ . If you do not answer the call, the ringer will continue to display the caller ID and icon until the call is answered or rejected. Long press 3s to hang up the call ④ .
  3. SMS reminder:
     After connecting APP with the Bluetooth, SMS reminder will display name and content of the message ⑤ and vibration; the displaying content of the page can be flipped over and viewed by touch button.
  4. Lost reminder:(Setting-My device -B36-switch setting – disconnect reminder) When the device and the mobile phone APP are connected, when the mobile phone leaves the safety distance of the device, it will continue to vibrate to remind the lost. (The distance of the reminder is determined according to the environment and obstacles, and the more complicated environment, the closer distance is reminded)
  5. Silent alarm clock reminder:
     After connecting the Bluetooth on the APP, enter the “Alarm Settings” on the APP, click “+”, set the corresponding alarm time, date, label, and then click ” √ ” to set the alarm successfully. It is supported with 20 groups; When the clock is reminded, the alarm label ⑥ will be displayed on the device interface, and it will vibrate for 10 times. Press the touch button to turn off.
  6. Sedentary reminder:
     After connecting, enter the “sedentary setting” on the APP, set the sedentary start time and end time, and how long the reminder time is. When the device detects reaching setting sedentary time, the screen will display the sedentary icon ⑦ and vibrate 2 times.
  7. Wrist-up light the screen:
     After connecting, wrist-up light is set up to turn on, the working time and the sensitivity of the wrist-up light can be set on the app.
     This function is : In the standby state, wrist-up can wake up the watch and enter the main interface on the APP .
  8. Switch setting: Click to enter – wear detection, heart rate automatic monitoring, stopwatch function, disconnect
     reminder.
     1. Wearing detection:
        After connecting, the “Wear Detection” switch is turned on. When the device is worn, the human body is detected for wearing. If it is determined that it is not worn, all detection functions will be automatically turned off, and no data to avoid error.
     2. Heart rate automatic monitoring:
        After connecting, the “Heart Rate Automatic Monitoring” switch is turned on. The device heart rate is reported to the APP once every 30 minutes. When the switch is turned off, the sensor light of the watch is off, if it is not measured, and there is no data in the APP and the background.
     3. Stopwatch:
        After connecting, the “Stopwatch function” switch is turned on, and the stopwatch interface appears on the device ⑧ (the resident interface, the numbers on the stopwatch are all zero); Switch the watch to the stopwatch interface, long press 3S to start the stopwatch, the red button on the stopwatch will light up ⑨ , then single touch the green light ⑩ to start the timer, single touch to pause, single touch to continuous timer again, and press 3S to exit the stopwatch interface. Then the data of the stopwatch interface is zero. When the APP stopwatch function switch is turned off, the stopwatch interface does not appear on the device.
     4. Disconnected reminder:
        When connecting and open this function on the app, when the mobile phone leaves the safety distance of the watch, it will continuously vibrate to remind the lost.
  9. Take Photo:
     On APP, enter my device, click the “take photo” function, the phone directly enters the camera mode, the camera icon appears on the watch , shakes the watch (or clicks the watch touch button), the mobile phone automatically takes a photo; click the phone back button and exit the photo mode.
  10. Reset device password:
      To prevent the watch from being connected by others, a password can be set on the APP. When using it for the first time, the default old password is: “0000” , then enter the new password and click “Reset Password” to complete. (the password is set successfully then re-bind the watch ). If you need to change your password, the old password is the new one you set the previous time. If the password is forgotten, long press 6S on the sleep interface of the watch and it will vibrate to clear the password. At this time, the default password of the device password is “0000”. When the APP connects to the watch again, you can connect without entering a password.
  11. Firmware upgrade:
      When the new version of the watch device is available, connect APP and it will prompt to update. Pls make sure the enough battery life for update
      1. If the upgrade fails and screen of the watch is off, restart the APP and the mobile phone Bluetooth and open the APP to re-bind the device (the iPhone need to ignore the Bluetooth device in the mobile phone setting), the Bluetooth search device name is “DfuLang”, rebind and connect, upgrade again.
      2. If the screen displays “x x x”, it means that the software program of the watch has been lost. Please contact customer service for the after-sales service.
  12. Clear data:
      After connecting the Bluetooth on the APP, click “Clear Data”. This will clear all the data in the watch and power off. The device password will be back to “0000”.

COMMON PROBLEMS

1. Solutions of watch bind failure:
   1. When binding, you need to open Bluetooth, GPS positioning function and mobile phone network.
   2. Check if the Bluetooth interface of the mobile phone has been paired. If it has been paired, please unpair it first, then restart the watch and search by APP.
2. Solutions of the Bluetooth frequency disconnect after the watch is bound:
   1. Bluetooth frequency is disconnected because the APP background running is closed by the mobile smart power saver. You can find the battery management through the mobile phone setting interface, and set it to allow the background operation.
   2. In order to avoid manually cleaning up the “H Band” in the background, please lock it.
3. Solutions when there is no message notification displayed on watch :
   1. Check if the notification message function switch in the app is open.
   2. Check if the app notification usage right is open. If it is an Android phone, click the question mark in the upper right corner of the APP notification interface to open it.
   3. Check if the corresponding APP, WeChat, Facebook, etc. in the notification management in the phone settings enable notification.
   4. Check social app settings if the new message notification is open and the content display is open. After resetting, it is recommended that the phone and the watch be turned off and restarted to re-bind.
4. Can not be charged or the battery is not durable:
   1. When charging, connect one end of the charging cable to the charging port of the watch , and the other end to the USB charging head or charge it on the computer.
   2. When charging, the battery icon is displayed. If it is not displayed, please adjust the position of the charging cable and try again. It is recommended to select 5V, 1-2A charging head. The charging duration is better within 2-3 hours. If charging time is too short, it will affect the battery endurance. If too long, it will affect the battery life.

PRECAUTIONS

1. Low battery: When the battery is low, the small battery icon on the main interface will flash. After the battery is exhausted, the watch will be turned off. Long press 5S, it will be turned on again, the big low power icon will be displayed and flash. The display time is 3S, flashing 3 Up to 5 times, then the screen will be turned off. If charging at this time, the battery is automatically turned on, and the watch interface can be operated normally.
2. Charging: When it starts, the charging progress icon is displayed for 5 seconds and then the screen is turned off. When need to view, touch watch light again for 5 seconds and then be turned off. A single touch can enter the main interface during charging.
3. The charging environment with temperature exceeding 60 degrees or higher may cause the device to overheat and deform.
4. This device uses the built-in battery so it is forbidden to disassemble. Please do not drop, collide, squeeze, puncture or cut.
5. Please do not wear this equipment when diving, and do not operate the device underwater.
6. When the battery is broken or leaked, avoid contact with eyes and skin. Please do not worry when the situation occurs, immediately rinse with water and go to the hospital for examination.
7. The battery is damaged or has aged. Reminder: Please dispose the battery in accordance with local laws and regulations. The battery of this device is a polymer lithium battery that cannot be disposed as ordinary household garbage.

IMPORTANT REMINDER:

This product is not a medical device and heart rate data is available for reference. This product is not intended for diagnosis and treatment, but it may have preventive effects. If abnormal conditions occur, please seek medical advice promptly.

WARRANTY:

To protect your rights and interests, please read this warranty carefully and you will enjoy after-sales service provided by our company.

First, to provide you with better after-sales service, our company promises:

1. Within 7 days from the date of purchase, if the product has quality problems, you can choose to return or exchange.
2. Within 15 days from the date of purchase, if the product has quality problems, you can choose to exchange the goods.
3. Within one year from the date of purchase, if the product has quality problems, we will provide free repairs. When sending back to repair, please send the warranty certificate (including the warranty card, invoice) and products to our production base. When returning or replacing, please contact the seller and keep the products and accessories, random materials and accessories intact.

Second, during the warranty period, our company will not provide free warranty service under one of the following conditions:

1. Human-induced failures, including: failures caused by improper use, maintenance and storage or failure to follow the instructions; failures caused by disassemble of the product or repairs that are not at our production base.
2. Failure caused by irresistible factors (such as fire, flood, earthquake, lightning strike, etc.).
3. Unable to provide warranty certificate or modify the warranty certificate without authorization.

WARRANTY CARD:

Operation instruction

Function:

1. LED movement, save power design. In standby mode, display anything, press mode key One time to display time, press MODE key twince time to display date.
2. Personality anti lectotype, the LED light die out means current time or date
3. 12/24H format

Press MODE key to convert the MODE.

Time and date set

1. In standby mode, press MODE key once, to start the watch and display current our.
2. Hold SET key 3 seconds, the HOUR flashing, press MODE key to adjust the Hour.
   Hold on the MODE key, the digital will adjust automatically.
   If the “PM” light on means AM, otherwise means PM.
3. Press SET key , the MINUTES flashing, press MODE key to adjust the Minutes.
4. Press SET key , the MONTH flashing, press MODE key to adjust the Month.
   If the “DATE” light die out means current mode is DATE MODE.
5. Press SET key , DATE flashing, press MODE key to adjust the Date.
6. Press SET key , will turn back to TIME MODE.

Skmei Kids 6 Digits Watch

Skmei Kids 6 Digits Watch

SETUP

Features

• 6 Digits LCD Display，Display Hour ,Minute ,Second ,Week
• Chime hourly and Daily Alarm
• 12 / 24H format selectable，Auto Calendar
• 1/100 second Chronograph with split function
• EL backlight

Operational Manual

• At any mode, press A key then EL backlight will last for 3s.
• In normal Mode, Press D key to check Month and Date
• In normal Mode, Press C key to check Alarm time
• Press B key to convert mode:

Chronograph function

In normal display mode: press B key , enter Chronograph mode

• Press D to start, press D again to suspend, press D again to continue,press D to suspend again,……when suspend,press C key back to 0:00:00.
• In Chronograph mode, press D key to start, press C key enter into split function and get the first group record ,but the second group is still processing in the back ground, press C key again to run the third group record, press C again to stop the running of the second group and read the second record; but the third group is still processing in the back ground……when the final group finished, Press D key to stop the SPL function, press C key to read the final group(SUM) record, press C key again to clear the record to 0:00:00.

Alarm Setting

• in normal display Mode, press B key twice enter into Alarm Mode, and Alarm Hour is flashing,Press D key to adjust the correct hour for your Alarm.
• Press C key and the Alarm Minutes is flashing. Press D key to adjust the correct minute for your alarm.
• Press B key to exit.

Alarm & Chime ON/OFF

• In normal display mode press C and D key together to ON/OFF the alarm.
• If the icon “ ” appears in the corner, the alarm is ON. If the icon disappears, the alarm is OFF. Press B key to exit.
• In normal display mode, Hold C then press B key to ON/OFF the hourly chime.
• If all the week icons (MO/TU/WE/TH/FR/SA/SU) appear, the Chime is on; if all the week icons disappear, the Chime is off.

Time Setting

In normal display Mode, press B key three times to enter time setting mode and the Seconds will be flashing.

Press D key to reset the Seconds to zero.

• Press C key the Minute will flash. Press D key to adjust the correct Minutes.
• Press C key the Hours will flash. Press D key to adjust correct Hours
• Press C key the Date will flash. Press D key to adjust correct date
• Press C key the Month will flash. Press D key to adjust correct Month
• Press C key the Date will flash. Press D key to adjust correct date
• Press C key the week will flash. Press D key to adjust the correct week.
• Press B key to exit.

Skmei Kids 6 Digits Watch Operation Manual – Optimized PDF
Skmei Kids 6 Digits Watch Operation Manual – Original PDF

SPECIFICATIONS

FAQ’S

What is the difference between SKMEI and SKMEI kids?

The difference between SKMEI and SKMEI kids is the size. The SKMEI is larger than the SKMEI kids.

What are the differences between each model of Skmei watches?

Here are some differences among each model of Skmei watches:
The models of Skmei watches with a date display have a date window at 3 o’clock, while those without a date display have the time of day at 3 o’clock.
The models with a chronograph function have three small sub-dials at 3, 6, and 9 o’clock, while those without a chronograph function have only two small sub-dials at 3 and 9 o’clock.
The models with an alarm have an alarm icon at 12 o’clock, while those without an alarm do not have an alarm icon.
The models with a stopwatch feature have two small sub-dials at 6 and 9 o’clock, while those without a stopwatch feature only have one small sub-dial at 9 o’clock.
The models with a calendar feature have a calendar window at 4 o’clock, while those without a calendar feature do not have a calendar window. The models with a world time feature have world time cities printed on the outer ring of each hour marker, while those without a world time feature do not have world time cities printed on their hour markers .
The models with an EL backlight feature have an EL backlight button on their right side, while those without an EL backlight feature do not have an EL backlight button .
The models with a 12/24H format selectable feature can switch between 12H and 24H formats by pressing the D key for 2 seconds ,while those without this feature can only be used in 12H format .

How to set up the time?

To set up the time ,press B key to enter into setting mode ,press D key to check hour ,press C key to check minute ,and press B key to confirm it .

How to set up the alarm ?

To set up the alarm ,press B key to enter into setting mode ,press D key to check hour ,press C key to check minute ,and press B key to confirm it .

How to use daily alarm ?

To use daily alarm ,press B key to enter into setting mode ,press D key to check daily Alarm ON or OFF ,press C key to confirm it .

How do you set a watch with 4 buttons?

Press the lower right button one time and again use the upper right button to set the minutes. Press the lower right button one time and now use the upper right button to set the hour of your local.

Why is my watch beeping every hour?

This reminder is often used for a wake-up call, but it can function as an alarm to take medications, indicate a lunch hour or any other desired function. To set a single alarm to repeat at the same time daily, press the button on the bottom left to access the alarm menu.

How do I set a digital watch?

To set a digital watch, start by switching from normal mode to time mode. Then, press the “Advance” button to increase the minutes and the “Mode” button to change the hours. If your watch has more complicated settings, like Date and Day of the Week, move through the options using the “Mode” button.

When should you wear a digital watch?

With the ability to record time elapsed and distance traveled, digital watches make it easy to track your workouts. Whether you run every day or spend hours in the gym, your digital watch can track your progress and help you set goals to keep improving. Some digital watches can also monitor your heart rate.

What does the silent mode icon look like?

The Silent Mode icon looks like a speaker with a line through it or a speaker with circle and a line superimposed over it. When the Silent Mode is disabled, only a speaker icon appears.

What is difference between digital and smart watch?

A digital watch is any wristwatch that indicates the time using digits on the display (as opposed to hour, minute, and second hands), while a smartwatch is a wearable computer on your wrist that also tells the time.

Is digital watch allowed in CA exam?

Normal Digital watches could be allowed in the exams but in a prudent manner you should not take a gamble on it. Moreover it can also cause disturbance during your exam if Inviligator checks your watch to satisfy himself of any unfair means with which the watch could be associated.

What are the features of the Skmei Kids 6 Digits Watch?

The Skmei Kids 6 Digits Watch features a 6 digits LCD display that shows the hour, minute, second, and week. It also has chime hourly and daily alarm functions, a 1/100 second chronograph with split function, and an EL backlight.