STV ZER910 ZERO in WASP nest Killer Powder User Manual

Identification of the substance/mixture and of the company/undertaking

 Product identifier

Zero In Wasp Nest Killer Powder

Relevant identified uses of the substance or mixture and uses advised against

For use as an insecticide

Details of the supplier of the safety data sheet

• STV International Ltd
• Forge House
• Little Cressingham
• Watton
• Thetford
• Norfolk
• IP25 6ND

+ 44 (0) 1953 881 580 (Office hours only)
[email protected]

Emergency telephone number

For product information, contact STV International Ltd on the telephone number stated in section 1.3.

In the event of a medical enquiry involving this product, please contact your doctor or local hospital accident and emergency department.

For urgent medical advice, call the NHS Helpline on 111 (England, Scotland & Wales).
For medical emergencies, dial 999 (UK & Ireland) or 112 from any EU country.

Hazards identification

Classification of the substance or mixture

Classification in accordance with Regulation (EC) 1272/2008

1. Aquatic Acute 1; H400
2. Aquatic Chronic 1; H410

Label elements

Hazard Pictogram

• GHS09
  
  

Signal Word

• Warning

Hazard Statements

• H410: Very toxic to aquatic life with long lasting effects.

Precautionary Statements

• P102 Keep out of reach of children.
• P103 Read label before use.
• P260 Do not breathe dust.
• P270 Do not eat, drink or smoke when using this product. P262 Do not get in eyes, on skin, or on clothing.
• P273 Avoid release to the environment.
• P391 Collect spillage.
• P501 Dispose of contents/ container in accordance with national regulations.

Other labelling required under Regulation (EC) 1272/2008

• EUH208: Contains permethrin. May produce an allergic reaction.

Other hazards

• None

Composition/information on ingredients

Mixtures

For full text of hazard statements, see section 16.

First aid measures

Description of first aid measures

Inhalation

Remove affected person from source of contamination. Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Get medical attention if any discomfort continues.

Skin

Wash skin thoroughly with soap and water. Get medical attention if irritation persists after washing.

Eyes

In case of eye contact, rinse eyes immediately with plenty of water.
Remove contact lenses if present and open eyelids wide apart. Continue to rinse for at least 15 minutes and get medical attention if irritation persists.

Ingestion

Rinse mouth with water and give water to drink. Do not induce vomiting unless instructed to do so by medical personnel. Never give anything by mouth to an unconscious person.

Most important symptoms and effects, both acute and delayed

This product is not classified as hazardous to health, therefore no specific symptoms are noted.
However, if eye, skin or respiratory irritation persists, or if you are feeling unwell after exposure to the product, seek medical advice.

Indication of any immediate medical attention and special treatment needed

This product is not classified as hazardous to health, therefore no specific treatment is noted. Treat symptomatically.

Firefighting measures

Extinguishing media

Suitable extinguishing media

• Water spray, fog or mist.
• Carbon dioxide (CO2).
• Dry chemicals, sand, dolomite etc.

Unsuitable extinguishing media

• Avoid high pressure media

Special hazards arising from the substance or mixture

None known. The product is non-combustible.

Advice for firefighters

Use appropriate personal protective equipment to protect skin, eyes and face. Use suitable breathing apparatus to avoid inhalation of dust and hazardous fumes.
Run-off from firefighting waters should be contained to avoid release to the environment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Wear protective clothing as described in Section 8 of this safety data sheet. Avoid inhalation of dust.
In the event of a large spill, area should be evacuated in case of formation of dust clouds.

Environmental precautions

Do not allow product to enter drains or watercourse. In the case of a large spill, or if a large quantity of product enters the drain or watercourse, contact the Environment Agency or other relevant local authority immediately.

Methods and material for containment and cleaning up

Collect powder using special dust vacuum cleaner with particle filter or carefully sweep into suitable waste disposal containers and seal securely. Avoid generation and spreading of dust.

Reference to other sections

• See section 8 for personal protective equipment.
• See section 13 for disposal considerations.

Handling and storage

Precautions for safe handling

Avoid handling which leads to dust formation. Persons susceptible to allergic reactions should not handle this product.

Conditions for safe storage, including any incompatibilities

Store in tightly-closed, original container in a dry and cool place. Keep separate from food, feed stuffs, fertilisers and other sensitive material.

Specific end use(s)

For use as an insecticide.

Exposure controls/personal protection

Control parameters

Occupational exposure limits

• TALC
  Long-term exposure limit (8-hour TWA): 1 mg/m³
• SIPERNAT 50 S
• TLVs ACGI 10mg/m3 UK EH40/95 3mg/m3 respirable dust, 8 h oes, 6mg/m3 total dust oes.
• CHINA CLAY
  Inorganic dust WEL 4mg/m3 resp. dust TWA 8 hrs.

Exposure controls

Engineering controls

Use mechanical ventilation if there is a risk of handling causing formation of airborne dust.

Eye/face protection

Eye wear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible.

Hand protection

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible.

Respiratory protection

Ensure adequate ventilation. Protection against nuisance dust must be used when the airborne concentration exceeds 10 mg/m3. Respiratory protection complying with an approved standard should be worn if a risk assessment indicates inhalation of contaminants is possible.

Environmental exposure controls

Do not release to the environment.

Physical and chemical properties

Information on basic physical and chemical properties

• Appearance: Grey dusty powder
• Odour: No characteristic odour
• Odour threshold: Information not available
• pH: Information not available
• Melting point/freezing point: Information not available
• Initial boiling point and boiling range: Information not available
• Flash point: Information not available
• Evaporation rate: Information not available
• Flammability: Information not available
• Upper/lower flammability or explosive limits: Information not available
• Vapour pressure: Information not available
• Vapour density: Information not available
• Relative density: Information not available
• Solubility(ies): Insoluble in water
• Partition coefficient: n-octanol/water: Information not available
• Auto-ignition temperature: Information not available
• Decomposition temperature: Information not available
• Viscosity: Information not available
• Explosive properties: Information not available
• Oxidising properties: Information not available.

Other information

None

Stability and reactivity

Reactivity

Information not available

Chemical stability

Stable at normal ambient temperatures and when used as recommended.

Possibility of hazardous reactions

Hazardous polymerisation will not occur.

Conditions to avoid

Avoid contact with water.

Incompatible materials

Information not available.

Hazardous decomposition products

Does not decompose when used and stored as recommended.

Toxicological information

Information on toxicological effects

Toxicity of product

• Acute toxicity: Not expected to be toxic.
• Skin corrosion/irritation: Product is not classified as causing skin corrosion or irritation.
• Serious eye damage/irritation: Product is not classified as causing serious eye damage or irritation
• Respiratory or skin sensitisation: Product is not classified as causing skin sensitisation.
• Germ cell mutagenicity: No information specified.
• Carcinogenicity: No information specified.
• Reproductive toxicity: No information specified.
• STOT-single exposure: No information specified.
• STOT-repeated exposure: No information specified.
• Aspiration hazard: No information specified.

Toxicity of ingredients

Permethrin:

1. LD50 Oral (Rat) 383 mg/kg
2. LC50 Inhalation (Rat) 485 mg/M3
3. LD50 Dermal (Rabbit) >2000 mg/kg

Ecological information

Toxicity

Toxicity of product

The product is very toxic to aquatic life with long lasting effects.

Toxicity of ingredients

Permethrin:

1. LC50 (Fathead Minow) 96Hr 0.016 mg/L
2. EC50 Daphnia Magna (Water Flea) 48Hr 0.32 µg/L

Persistence and degradability

The active substance is not readily biodegradable.

Bioaccumulative potential

Information not available

Mobility in soil

Information not available

Results of PBT and vPvB assessment

Information not available

Other adverse effects

Information not available

Disposal considerations

Waste treatment methods

Disposal methods

This material and its container must be disposed of in a safe way. Dispose of in accordance with applicable regional, national, and local laws and regulations.
Dispose of contaminated packaging as unused product unless fully cleaned.

Transport information

UN number

• 3077

UN proper shipping name

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (CONTAINS PERMETHRIN)

Transport hazard class(es)

• 9

 Packing group

• III

Environmental hazards

Environmentally hazardous substance/marine pollutant

Special precautions for user

• EmS : F-A, S-F
• ADR transport category :  3
• Emergency Action Code :  2Z
• Hazard Identification Number (ADR/RID) :  90
• Tunnel restriction code :  (E)

Transport in bulk according to Annex II of Marpol and the IBC Code

Not applicable.

Regulatory information

Safety, health and environmental regulations/legislation specific for the substance or mixture

This mixture has been classified in accordance with Regulation (EC) 1272/2008.
This product is authorised in accordance with the Control of Pesticides Regulations 1986 (as amended).
This product is subject to The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009.
This safety data sheet has been compiled in accordance with Regulation (EC) 1906/2006 as amended by Regulation (EU) 2015/830.

Chemical safety assessment

No chemical safety assessment has been carried out.

Other information

Abbreviations and acronyms

• PBT – Persistent, Bioaccumulative and Toxic
• vPvB – Very persistent and very Bioaccumulative

Full text of hazard statements listed in section 3

1. H302: Harmful if swallowed
2. H332: Harmful if inhaled
3. H317: May cause an allergic skin reaction
4. H400: Very toxic to aquatic life
5. H410: Very toxic to aquatic life with long lasting effects
6. H315: Causes skin irritation
7. H319: Causes serious eye irritation
8. H412: Harmful to aquatic life with long lasting effects

Comments

Use only in accordance with label instructions.
The information contained in this data sheet does not constitute the user’s own assessment of workplace risks as required by legislation. The information in this data sheet should be considered when undertaking a risk assessment under the COSHH regulations.
The information contained within this data sheet is strictly for general guidance only and should not be relied upon over and above this. This data sheet is intended to provide general health and safety guidance on the storage and transportation of the preparation.
The information in this data sheet is accurate at the date of publication and will be updated as and when appropriate. No liability will be accepted by STV International Ltd for any loss, injury or damage arising from any failure to comply with the information and advice contained within this data sheet and/or failure to comply with the manufacturer’s guidelines, product label data and any associated technical usage literature.

 Insect Killer User Manual

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Zero In Ant & Crawling Insect Killer

1.2. Relevant identified uses of the substance or mixture and uses advised against

For use as an insecticide

1.3. Details of the supplier of the safety data sheet

STV International Ltd
Forge House
Little Cress Ingham
Watton
Thetford
Norfolk
IP25 6ND
+ 44 (0) 1953 881 580 (Office hours only) [email protected]

1.4. Emergency telephone number

For product information, contact STV International Ltd on the telephone number stated in section 1.3.
In the event of a medical enquiry involving this product, please contact your doctor or local hospital accident and emergency department.
For urgent medical advice, call the NHS Helpline on 111 (England, Scotland & Wales). For medical emergencies, dial 999 (UK & Ireland) or 112 from any EU country.
Environmental agency emergency phone number 0800 807060.

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Flam. Aerosol 1; H222, H229 Aquatic Acute 1; H400

Aquatic Chronic 1; H410

2.2. Label elements

GHS02, GHS09

Danger

H222: Extremely flammable aerosol.
H229: Pressurized container: May burst if heated.
H410: Very toxic to aquatic life with long lasting effects.

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children
P103 Read label before use
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
P501 Dispose of contents/container in accordance with local/national regulations.

EUH208: Contains permethrin. May produce an allergic reaction.

2.3. Other hazards

This mixture does not meet the criteria for PBT or vPvB in accordance with Annex XIII of Regulation (EC) No 1907/2006 (REACH).

SECTION 3: Composition/information on ingredients

3.1. Mixtures

SECTION 4: First aid measures

4.1. Description of first aid measures

This product is not considered to be hazardous to human health. However, if exposure occurs, the following first aid measures should be followed:

Move exposed person to fresh air. If breathing discomfort occurs, seek medical attention.

Wash contaminated skin with plenty of soap and water. Seek medical attention if skin irritation occurs.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Seek medical attention if eye irritation occurs.

Wash out mouth with water. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

4.2. Most important symptoms and effects, both acute and delayed

Inhalation – Vapors may cause headache, fatigue, dizziness and nausea. Ingestion – Gastrointestinal symptoms, including upset stomach. Skin contact ­ The product contains a sensitizing substance.
Eye contact- May cause discomfort.

4.3. Indication of any immediate medical attention and special treatment needed

No specific advice. Treat symptomatically.

SECTION 5: Firefighting measures

5.1. Extinguishing media

Extinguish with foam, carbon dioxide or dry powder.

Not applicable.

5.2. Special hazards arising from the substance or mixture

Extremely flammable aerosol. Pressurized container: may burst if heated. Thermal decomposition or combustion products may include the following substances: Ammonia or amines. Carbon monoxide (CO). Carbon dioxide (CO2). Nitrous gases (NOx).

5.3. Advice for firefighters

Cool containers exposed to flames with water until well after the fire is out. Wear protective clothing to prevent contact with skin and eyes. Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Wear suitable protective equipment, including gloves, goggles/face shield, respirator, boots, clothing or apron, as appropriate. Do not touch or walk into spilled material. No smoking, sparks, flames or other sources of ignition near spillage. Avoid contact with skin, eyes and clothing. Avoid inhalation of vapors. Provide adequate ventilation. If aerosol cans are ruptured, care should be taken due to the rapid escape of the pressurized contents and propellant. Avoid contact with contaminated tools and objects. Take care as floors and other surfaces may become slippery. Do not handle broken packages without protective equipment. Wash thoroughly after dealing with a spillage.

6.2. Environmental precautions

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Environmental agency emergency phone number 0800 807060.

6.3. Methods and material for containment and cleaning up

Wear suitable protective equipment, including gloves, goggles/face shield, respirator, boots, clothing or apron, as appropriate. Eliminate all sources of ignition. Provide adequate ventilation. Absorb spillage with inert, damp, non-combustible material. Collect and place in suitable waste disposal containers and seal securely. Containers with collected spillage must be properly labelled with correct contents and hazard symbol. Flush contaminated area with plenty of water. Wash thoroughly after dealing with a spillage.

6.4. Reference to other sections

See section 1 for emergency contact information. See section 8 for information on appropriate personal protective equipment. See section 13 for additional waste treatment information.

SECTION 7: Handling and storage

7.1. Precautions for safe handling

To avoid risks to human health and the environment, comply with the instructions for use. Use biocides safely. Always read the label and product information before use. Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Provide adequate ventilation. Keep container in a well-ventilated place. Avoid contact with skin, eyes and clothing.
Avoid breathing vapor/spray. Do not expose to temperatures exceeding 50°C/122°F. Do not spray on an open flame or other ignition source. Keep out of the reach of children. Do not pierce or burn, even after use. Do not empty into drains. Do not eat, drink or smoke when using this product. Avoid contact with contaminated tools and objects. Do not handle broken packages without protective equipment. Wash hands thoroughly after handling.

7.2. Conditions for safe storage, including any incompatibilities

Store at temperatures between 4°C and 40°C. Do not expose to temperatures exceeding 50°C/122°F. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep out of the reach of children. Storage class Flammable compressed gas storage.

7.3. Specific end use(s)

For use as an insecticide

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

PERMETHRIN (CAS: 52645-53-1)
DNEL – Oral; : 16.7 – 120 mg/kg
PNEC – Fresh water; 0.00000047 mg/l
– STP; 0.00495 mg/l
– Soil; >0.0876 mg/kg
– Sediment (Freshwater); 0.01 mg/kg

8.2. Exposure controls

If user operations generate dust, fumes, gas, vapor or mist use Process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended statutory limits.

Eye/face protection not normally required.
Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. The following protection should be worn: Tight-fitting safety glasses. Personal protective equipment for eye and face protection should comply with European Standard EN166.

Hand protection not normally required. Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. After contamination with product change gloves immediately and dispose of them according to relevant national and local regulations. Recommended : (<1 hour) PVC , Nitrile gloves.

No personal respiratory protective equipment normally required. Respiratory protection should only be used to control residual risk of short duration activities, when all reasonably practicable steps have been taken to reduce exposure at source e.g. containment and/or local extract ventilation. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Always follow respirator manufacturer’s instructions regarding wearing and maintenance. Recommended: Full mask with type ABEK filter.

Steps should be taken to ensure that this product is not released accidentally into the environment.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

Appearance: Colorless aerosol
Odour: Characteristic
Odour threshold: Information not available
pH: Information not available
Melting point/freezing point: Information not available
Initial boiling point and boiling range: Information not available
Flash point: Information not available
Evaporation rate: Information not available
Flammability: Extremely flammable aerosol
Upper/lower flammability or explosive limits: Information not available Vapor pressure: Information not available
Vapor density: Information not available
Relative density: Information not available
Solubility(ies): Information not available
Partition coefficient: n-octanol/water: Information not available
Auto-ignition temperature: Information not available
Decomposition temperature: Information not available
Viscosity: Information not available
Explosive properties: Information not available
Oxidizing properties: Information not available

9.2. Other information None

SECTION 10: Stability and reactivity

10.1. Reactivity

There are no known reactivity hazards associated with this product.

10.2. Chemical stability

Product is stable under normal storage and handling conditions.

10.3. Possibility of hazardous reactions

Not determined.

10.4. Conditions to avoid

Avoid heat, flames and other sources of ignition.

10.5. Incompatible materials

No specific material or group of materials is likely to react with the product to produce a hazardous situation.

10.6. Hazardous decomposition products

Thermal decomposition or combustion products may include the following substances: Ammonia or amines. Carbon monoxide (CO). Carbon dioxide (CO2). Nitrous gases (NOx).

SECTION 11: Toxicological information

11.1. Information on toxicological effects

Acute toxicity: Not expected to be toxic.
Skin corrosion/irritation: Product is not classified as causing skin corrosion or irritation.
Serious eye damage/irritation: Product is not classified as causing serious eye damage or irritation
Respiratory or skin sensitization: The product contains a sensitizing substance. Vapors may cause
headache, fatigue, dizziness and nausea
Germ cell mutagenicity: No information specified.
Carcinogenicity: No information specified.
Reproductive toxicity: No information specified.
STOT-single exposure: No information specified.
STOT-repeated exposure: No information specified.
Aspiration hazard: No information specified.

TETRAMETHRIN
Acute toxicity – oral
Acute toxicity oral (LD mg/kg)
2,000.0
Species Rat
Acute toxicity – dermal
Acute toxicity dermal (LD mg/kg)
2,000.0 Species Rat

PERMETHRIN
Acute toxicity – oral
Acute toxicity oral (LD mg/kg)
554.0
Species Rat
ATE oral (mg/kg) 554.0
Acute toxicity – dermal
Acute toxicity dermal (LD mg/kg)
2,000.1

Species Rat
ATE dermal (mg/kg)
2,000.1
Acute toxicity – inhalation
Acute toxicity inhalation
(LC dust/mist mg/l)
4.638
Species Rat
ATE inhalation
(dusts/mists mg/l)
4.638

SECTION 12: Ecological information

12.1. Toxicity

This product is classified as very toxic to aquatic life with long lasting effects.

PIPERONYL BUTOXIDE
Acute aquatic toxicity
LE(C)₅₀ 0.1 < L(E)C50 ≤ 1
M factor (Acute) 1
Chronic aquatic toxicity
M factor (Chronic) 1

ATETRAMETHRIN
Acute aquatic toxicity
LE(C)₅₀ 0.1 < L(E)C50 ≤ 1
M factor (Acute) 1
Acute toxicity – fish LC50, 96 hours: 0.033 mg/l, Brach danio reroof (Zebra Fish)
Acute toxicity – aquatic invertebrates
EC₅₀, 48 hours: 0.47 mg/l, Daphnia magna
Acute toxicity – aquatic plants
IC₅₀, 72 hours: 1.36 mg/l, Scenedesmus subspicatus
Chronic aquatic toxicity
NOEC 0.001 < NOEC ≤ 0.01
Degradability Non-rapidly degradable
M factor (Chronic) 10

PERMETHRIN
Acute aquatic toxicity
LE(C)₅₀ 0.001 < L(E)C50 ≤ 0.01
M factor (Acute) 100
Acute toxicity – fish LC50, 96 hours: 0.0089 mg/l, Poecilia reticulata (Guppy)
LC50, 96 hours: 0.145 mg/l, Cyprinus carpio (Common carp)
Acute toxicity – aquatic invertebrates
EC₅₀, 48 hours: 0.02 mg/l, Daphnia magna
Chronic aquatic toxicity
NOEC 0.00001 < NOEC ≤ 0.0001
Degradability Non-rapidly degradable
M factor (Chronic) 1000

12.2. Persistence and degradability

The product is expected to be biodegradable.

12.3. Bioaccumulate potential

The product does not contain any substances expected to be bioaccumulating.

12.4. Mobility in soil

Information not available

12.5. Results of PBT and vPvB assessment

This product is not identified as a PBT/vPvB substance.

12.6. Other adverse effects

Information not available

SECTION 13: Disposal considerations

13.1. Waste treatment methods

Dispose of contents/container in accordance with all local, regional, national and international regulations.

SECTION 14: Transport information

14.1. UN number

UN1950

14.2. UN proper shipping name

AEROSOLS

14.3. Transport hazard class(es)

2.1

14.4. Packing group

Not applicable.

14.5. Environmental hazards

Environmentally hazardous substance/marine pollutant

14.6. Special precautions for user

Tunnel restriction code (D)

14.7. Transport in bulk according to Annex II of Marol and the IBC Code

Not applicable.

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

This substance is classified and labelled in accordance with Regulation (EC) 1272/2008 and Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.

15.2. Chemical safety assessment

A Chemical Safety Assessment has not been carried out.

SECTION 16: Other information

ATE: Acute Toxicity Estimate.
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road.
CAS: Chemical Abstracts Service.
DNEL: Derived No Effect Level.
EC₅₀: 50% of maximal Effective Concentration.
IATA: International Air Transport Association.
ICAO: Technical Instructions for the Safe Transport of Dangerous Goods by Air.
IMDG: International Maritime Dangerous Goods.
LC₅₀: Lethal Concentration to 50 % of a test population.
LD₅₀: Lethal Dose to 50% of a test population (Median Lethal Dose).
NOEC: No Observed Effect Concentration.
PBT: Persistent, Bioaccumulate and Toxic substance.
PNEC: Predicted No Effect Concentration.
REACH: Registration, Evaluation, Authorization and Restriction of Chemicals Regulation (EC) No 1907/2006.
UN: United Nations.
vPvB: Very Persistent and Very Bioaccumulate

Acute Tox. = Acute toxicity
Aerosol = Aerosol
Aquatic Acute = Hazardous to the aquatic environment (acute)
Aquatic Chronic = Hazardous to the aquatic environment (chronic)
Asp. Tox. = Aspiration hazard
Press. Gas (Comp.) = Gas under pressure: Compressed gas
Skin Sens. = Skin sensitization
STOT SE = Specific target organ toxicity-single exposure

H220 Extremely flammable gas.
H222 Extremely flammable aerosol.
H229 Pressurized container: may burst if heated.
H302 Harmful if swallowed.
H317 May cause an allergic skin reaction.
H332 Harmful if inhaled.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.

Use only in accordance with label instructions.
The information contained in this data sheet does not constitute the user’s own assessment of workplace risks as required by legislation. The information in this data sheet should be considered when undertaking a risk assessment under the COSHH regulations. The information contained within this data sheet is strictly for general guidance only and should not be relied upon over and above this. This data sheet is intended to provide general health and safety guidance on the storage and transportation of the preparation. The information in this data sheet is accurate at the date of publication and will be updated as and when appropriate. No liability will be accepted by STV International Ltd for any loss, injury or damage arising from any failure to comply with the information and advice contained within this data sheet and/or failure to comply with the manufacturer’s guidelines, product label data and any associated technical usage literature