WIRELESS BACKUP CAMERA
Solar Powered 1080P App View with Smart Button
WP ITM. BT532755
Care Use Instruction
Important, retain for future reference: Read carefully
Please read all of the installation instructions carefully before installing the product. Improper installation will void the manufacturer‘s warranty. The installation instructions do not apply to all types of vehicles and are written as guidelines to assist in installing the system.
Consult an experienced technician if you are not comfortable installing the product. You can also contact TYPE S at 866.294.9244 to speak to one of our installation specialists if you have any specific questions regarding the Wireless Backup CaMera.
BEFORE using the Wireless Backup Camera – Solar Powered 1080P App View with Smart Button, please read the safety information provided in this user manual. ALWAYS use the product as outlined in this user manual.
Please make sure to read and understand all local laws and regulations regarding cameras and their use in a vehicle. Laws vary by state.
Frequency: | 2.4 GHz |
Operating Voltage: | DC SV |
Operating Temperature: | 149F ˜122F (-10C-50C) |
Water Resistance: | IP65 Rating (Camera Only) |
Wireless Range (Camera): | 33 Feet/ 10 Meters (without interference or obstruction) |
Wireless Range (Button): | 33 Feet/ 10 Meters (without interference or obstruction) |
Battery Capacity (Camera): | 33 Feet/ 10 Meters(Minimum Capacity 3200mAh) |
Battery Capacity (Button): | Operates with 1 pc CR2032 coin cell |
![]() |
![]() |
Power/ Mode Status | LED Indicators |
Power On Press and hold the power button until you see the blue LED light flashes and then release. | The Blue LED light flashes twice. |
Power Off Press and hold the power button for more than 2 seconds and then release. | The Red LED light flashes once. |
Reset password While the Backup Camera is on, press and hold the power button for more than S seconds and then release | Blue LED light flashes S times. |
Low Voltage Protection | Red LED flashes continuously. |
Please charge, pair, and test the Wireless Backup Camera with the TYPES Drive App before you install it on your vehicle.
NOTE: The camera should come with at least a 90% battery charge. We recommend charging for 5-6 hours prior to use to ensure maximum performance.
CHARGING THE WIRELESS BACKUP CAMERA
Open the camera power port plug cover and insert the charging cable. Most AC USB wall adapters will work with the USB charging cable.
Install the TYPES DRIVE APP on your smartphone. Scan the below QR code or search for the TYPES DRIVE APP in the Apple APP Store or the Google Play Store.
![]() |
![]() |
![]() |
![]() |
Compatible with iPhone 4s & higher, iPad3, iPad Mini, iPad Air & higher, and iPod touch 5th Generation & higher. Requires iOS 9.0 or higher. | Compatible with phones with Android” 5.0 or higher. |
Once installed, open the APP and begin enjoying your TYPES DRIVE APP
![]() |
![]() |
1. Open the TYPE S DRIVE APP and select the Backup Camera category. NOTE: Please turn on the Bluetooth of your smart device before pairing. |
2. Select License Plate Backup Camera from the list of backup cameras. The App will switch to the live view screen. An image from the camera will not be seen until the pairing process is complete (Step #8). |
![]() |
![]() |
3. Press and hold the Power Button on the Wireless Backup Camera until the blue LED light flashes 2 times. | 4. On the Wireless Backup Camera live view screen tap the Setting icon. |
![]() |
![]() |
5. Tap Pair Camera. | 6. Tap the Connect icon to pair with the camera. |
![]() |
![]() |
7. Follow the on-screen instructions, by assigning a new password for the camera and selecting confirm. | 8. Tap Join when the APP prompts you to join the Backup Camera’s WiFi network. |
![]() |
9. You should see the live view. NOTE: Regardless if you close or minimize the APP, the APP will automatically switch back to live view once the APP is reopened. |
![]() |
![]() |
1. Tap the Pair Button in the App Settings. | 2. The App will open a new window and begin scanning for the Smart Button to pair. |
![]() |
![]() |
3. Press and hold the Smart Button for more than 5 seconds in the pairing mode. | 4. SelectTYPE_S_BTN01 XXXXXXXXXXXX to pair. |
![]() |
|
5. Push the Smart Button to wake up the TYPES DRIVE APP. • A pop-up notification will appear for Android & iOS Phones • Press the Notification to open the TYPE S DRIVE APP and activate the License Plate Backup Camera Live View. |
![]() |
![]() |
1. Unscrew your license plate. | 2. Secure the Quick-Connect Wireless Backup Cam and license plate with screws back onto the rear of your vehicle. |
![]() |
|
3. Push and hold the power button of the Quick-Connect Wireless Backup Cam for 1 second, the blue LED light will flash 2 times. |
*Please follow your local laws and regulations regarding constant monitoring while driving. It is recommended that you glance at the image only when in reverse, and use as an aid. Do not rely solely on the camera view to back up.
B) LOWERING INSTALLATION – FOR VEHICLES WITH TRUNK OR HATCH DOOR RELEASE
(This allows more clearance for fingertips to release the door latch)
C) RAISED INSTALLATION – FOR TRUCKS & SUVs WITH STEP BUMPERS (This will raise the camera frame out of the cavity of the step bumper)
![]() |
![]() |
1. Unscrew and remove your license plate. | 2. Install the Two-Way Mounting Tabs using original Plates Screws and Mounting Screws. |
![]() |
|
3. Finally, install the Quick-Connect Wireless Backup Cam and license plate onto the rear of your vehicle and tighten the Mounting Nuts with a wrench. |
Warning: Slowly lower the tailgate on the pickup truck to check for a minimum of 1/4 inch clearance between the tailgate and the top of the camera frame. Some rear bumpers are installed higher than others which may result in the camera frame hitting the tailgate.
CHARGING THE SOLAR-POWERED WIRELESS BACKUP CAMERA
Open the camera power port plug cover and insert the charging cable. Most wall AC adapters will work with the USB charging cable .
![]() |
![]() |
ROTATE CAMERA Tap on the setting to reverse the camera view. BRIGHTNESS Swipe to adjust screen brightness. CHROMA Swipe to adjust screen chroma. |
CONTRAST Swipe to adjust screen contrast. SATURATION Swipe to adjust screen saturation. |
![]() |
![]() |
OPERATION TIME Scroll down to choose a different operation time. The Wireless Backup Camera’s parking view operation time will start to count down when you wake up the Wireless Backup Camera. When the timer runs out, the parking view will automatically switch to stand-by mode. | FIRMWARE VERSION Tap to check the Backup Camera’s firmware version. Tap to upgrade the Backup Camera’s firmware to the latest version through the APP: NOTE: – Keep your smartphone device connected to WiFi in order to download the firmware. – Make sure the APP is paired and connected to the camera prior to the upgrade. |
![]() |
![]() |
1. Tap Start update to begin. 2. After the upgrade is done, the APP will switch back to the live view. ![]() |
RESET DEFAULT Tap to clear all the camera settings. CHANGE PASSWORD Tap to change the Backup Camera’s pairing password. |
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious injury, including loss of life.
SAFETY AROUND AND BEHIND OTHER VEHICLES
Using a Wireless Backup Camera is not enough to completely overcome a vehicle’s blind spot. Many preventable injuries and deaths occur in driveways or parking lots when drivers do not see children, pets, or others near their vehicles. Here are a few safety tips that will help you to avoid a back-over accident:
CLEANING
WARRANTY
TYPES
LIMITED WARRANTY TYPES
warrants, to the original purchaser, that its products are free from defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, TYPE S liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and TYPES makes no other warranty of any kind aside from the limited express warranty stated above.
NOTE: Warranty only applies for North American customers of purchases made in North America.
CONDITIONS OF WARRANTY
If during the 1 year warranty period your new product is found to be defective, TYPES will repair such defect, or replace the product, without charge for parts or labor subject to the following conditions:
OWNER’S RESPONSIBILITIES:
TYPES will make every effort to provide warranty service within a reasonable period of time.
SHOULD YOU HAVE ANY QUESTIONS ABOUT THE SERVICE RECEIVED OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL-FREE AT 1.866.294.9244 DURING REGULAR BUSINESS HOURS MONDAY THROUGH FRIDAY 8:00 AM TO 5:00 PM.
NOTE: Toll-Free # is for North America Customers ONLY. See the Customer service section for customer contact numbers for other regions/offices.
For customer service and technical support, please call us at 1.866.294.9244. If at that time it is determined that a replacement unit is needed, the support representative will issue a Return Authorization and instructions on how to get a new unit. TYPES makes no other warranty of any kind aside from the limited express warranty stated herein
DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR PARTICULAR PURPOSE: EXCEPT AS SPECIFICALLY SET FORTH HEREIN, NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, IS MADE AS TO THE WIRELESS BACKUP CAMERA. EXCEPT AS EXPRESSLY SET FORTH HEREIN, TYPES AND/OR ITS AFFILIATES EXPRESSLY DISCLAIM, WITHOUT LIMITATION, ANY STATUTORY WARRANTIES AND ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TYPES and/or its affiliates do not guarantee or promise that the user of the Wireless Backup Camera will not be in an accident or otherwise not collide with an object and/or person. Our Wireless Backup Camera is not intended in any way to be a substitute for careful and cautious driving or for the consistent adherence to all applicable traffic laws and motor vehicle safety regulations.
The Wireless Backup Camera is not intended to be a substitute for rearview mirrors or for any other motor vehicle equipment mandated by law. Even when properly installed, our Wireless Backup Camera has a limited field of vision and does not provide a comprehensive view of the rear area of the vehicle. You should always look around outside your vehicle and use your mirrors to confirm rearward clearance and that your vehicle can back up safely.
TYPES and/or its affiliates are not responsible for a user’s intended or actual use of the Wireless Backup Camera. In no event shall TYPES and/or its affiliates have any liability for any losses (whether direct or indirect, in contract, tort, or otherwise) incurred in connection with the Wireless Backup Camera, including but not limited to damaged property, personal injury and/or loss of life. Neither shall TYPE S and/or its affiliates have any liability for any decision, action or inaction taken by any person in reliance on the Wireless Backup Camera, or for any delays, inaccuracies, and /or errors in connection with the Wireless Backup Camera and its functioning.
TYPE S and/or its affiliates shall have no responsibility or liability for damage and/or injury resulting from accidents occurring with vehicles having the installed, and TYPES and/or its affiliates, the manufacturer, distributor, and seller shall not be liable for any injury, loss or damage, incidental or consequential, arising out of the use or intended use of the product.4
CUSTOMER SERVICE/CONTACT
IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT RETURN THE PRODUCT TO THE STORE. CONTACT TYPE S DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN/ EXCHANGE THE PRODUCT.
FCC Compliance Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Wireless Backup Camera
Solar Powered 1080P App View with Smart Button
BT532755
Responsible Party:
TYPES
2975 Red Hill Ave., Ste. 100,
Costa Mesa, CA 92626
Tel: 866-294-9244
A Horizon Brands Company
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626, U.S.A.
1.866.294.9244 ]
[email protected]
02021 TYPE S. All rights reserved.
www.typesauto.com