The Instruction Manual of SW308
Fitness Tracker
Thank you for choosing the SW308 fitness tracker, which will be helpful for your exercise and health. The functions and features of this fitness tracker are introduced in this manual. Attention: Bluetooth is not available on this product.

I. How to charge

This product needs to be charged to activate before you use it for the first time.

1. Take out the watch from band; (please see the right pic)
2. Put the metal pins into the USB port then it will charge. (the metal pins should upward, the screen downward)

Attention: To extend the life of this battery, it is recommended that you can use the charging port with 5V/1A or lower than 5V/1A to charge it.

II. Setting instructions

1. Setting date and time (first icon on the “Setting”)
a. When you see the wrench (Settings icon) on the screen, please hold on to the circle button for 3 seconds to the setting interface.
b. The first setting unit is about the year. You can short press to add the number. (If you miss the correct number in any of the settings, you need to add the number to the max.  The program will then take you back to the minimum number and you can begin again.)
c. Once you have entered the correct number, press the circle button for 3 seconds to set the chosen number and move to the next setting which is the month and date.d. Warm tips: Short press to change the number and hold on the circle button to save the number.
2. Switching the time format (second icon on the “Setting”)

Please hold on the circle button for 3 seconds to select 12 hours or 24 hours format and you can short press to switch it then hold on the circle button again to save the setting.
3. Setting the gender (third icon on the “Setting”)
Please hold on the circle button for 3 seconds to choose the gender: male/female. You can short press to switch it then hold on the circle button again to save the setting.

4. Setting the age (forth icon on the “Setting”)
There are three numbers for setting the age. You can short press to change the number. Once you have entered the correct number, press the circle button for 3 seconds to set the chosen number and move to the next number. (These setting steps is similar to setting the date and time) After completed the age setting, please hold on the circle button for 3 seconds to save.

5. Setting the height (fifth icon on the “Setting”)
There are 2 numbers for setting the age. You can short press to change the number. Once you have entered the correct number, press the circle button for 3 seconds to set the  chosen number and move to the next number. (These setting steps is similar to setting the date and time) After completed the height setting, please hold on the circle button for  3 seconds to save.

6. Setting the weight (sixth icon on the “Setting”)
There are three numbers for setting the weight. You can short press to change the number. Once you have entered the correct number, press the circle button for 3 seconds to set the chosen number and move to the next number. (These setting steps is similar to setting the date and time) After completed the weight setting, please hold on to the circle button for 3 seconds to save.

7. Setting the unit format (seventh icon on the “Setting”)
Please hold on to the circle button for 3 seconds to choose the unit: Metric/Imperial. You can short press to switch it then hold on to the circle button again to save the setting. Warm tips: If you select the  Metric”, the setting unit will become cm/kg. If you select the “Imperial”, the setting unit will become an inch/pound.

8. Setting the step length (eighth icon on the “Setting”)
Please hold on to the circle button for 3 seconds to set the length of the step. You can short press to change the number. Once you have entered the correct number, press the circle button for 3 seconds to set the chosen number and move to the next number. (These setting steps is similar to setting the date and time) After completed the height setting, please hold on to the circle button for 3 seconds to save.
Attention: Setting the correct step length will help you get a more accurate distance traveled. 

III. Main Features

1.  Time display
   
2. Steps
   The steps will be generate when you move around. This fitness tracker will track your steps throughout the day. (And it will be reset at 12:00 p.m or 24:00.)
3. Calories
   Calories can be calculated on the age, height, weight and the amount of exercise. So it is very important that set your personal information on this watch. The calories throughout the day will be accumulated to display on the watch. (And the data will be reset at 12:00 p.m or 24:00.)
4. Distance
   5. Sleep
   
   Short press the circle button to the sleep interface, then please hold on the circle button for 3 seconds. (You can short press the circle button to turn on/off the sleep mode) You can select “ON” to enable the sleep mode, then hold it again to exit the sleep mode. This watch will not update your sleep time in real-time, the recording time is displaying 00:00.  At the same time, there will be a moon icon on the page of this time display. When you wake up, you can select “OFF” to disable the sleep mode, then you can get the sleep time.

Package list:

1 × Willful Fitness tracker
1 × Instruction Manual
1 × After-sales card
1 × Warranty card.

Product Parameters

*Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.

Safety Instructions

1. This watch is IP68 waterproof standard. You can wear it when washing hands, running in the rain and swimming. But do not wear it to take a shower, because it is not proof against the hot water.  Also, it is not suitable for diving, swimming in the sea, or having a sauna.
2. Because this watch band has not reached the edible level, please keep the watch out of reach of babies and pets in case they eat it by mistake.
3. If the band gets dirty, we suggest you can use the handwashing fluid and alcohol to clean the watch band.

willful M98 Bluetooth Wireless Headset User Manual

Product Specification

Product Overview

Basic Operation

For the first using, please fully charged the model M98

• 3.1 Power on: Long press MFB 3 seconds to power on
• 3.2 Power off: Long press MFB 3 seconds to power off
• 3.3 Pairing Mode: Make sure headset is in OFF state, press and hold the MFB button for about 6 seconds, until the indicator light alternates between blue and red, indicating that it is in pairing mode. If the headset never connected with any device before, just long press the MFB button for 3 seconds into pairing mode
• 3.4 Play / Pause: Short press MFB to play or pause when playing music
• 3.5 Answer / Hang up / Reject a call When call coming , short press MFB to answer or hang up a call, long press to reject a call 3.6 Audio Switching: When calling, Long press MFB 1 second to choose the audio from headset .
• 3.7 Redial the last call: Standby mode, double press MFB to redial the last call .
• 3.8 Voice dialing: Standby mode, long press MFB 1 second to start voice dialing
• 3.9 Next song: When playing music, long press Volume + to next song
• 3.10 Last song: When playing music, long press Volume – to Last song
• 3.11 Volume up: When playing music / calling, short press Volume + to control the volume up
• 3.12 Volume down: When playing music / calling, short press Volume -to control the volume down
• 3.13 Microphone Mute: When calling, short press Microphone mute key to mute, do again to cancel mute

willful SW021 Smartwatch

Bind Watch

1. Download and install App
   You can set up the watch through the “VeryFitPro” app for iOS or Android devices. The steps are shown as follows:
   Notes: The hardware platform of the equipment system shall meet requirements.I. Bind Watch
2. Bind process
   1. Turn on the Bluetooth and GPS on your mobile phone
   2. Bind Device
   3. Select product model: ID205L
   4. Click “Ok” to complete binding.
      Notes:
      1. During binding process, VeryFitPro will prompt you to enable GPS and Bluetooth, and authorize VeryFitPro to get access to the GPS on you mobile phone.
      2. Apple phones need to click “pair”, the watch has a variety of message reminders.
3. Synchronous data
   In daily wear, the watch can detect all kinds of product data. The user needs to connect the watch with bluetooth on the APP before synchronous operation. The detailed operations are shown as follows:Open the mobile APP> swipe down the page> sync prompt appears
   Notes! Please synchronize the data at least once within 7 days to avoid data loss at the watch end.

Instruction for Use

1. Charging schematic
   Buckle the watch into the charger seat as shown in the picture. It needs to be charged to activate the watch when it is started for the first time.Make sure the metal contacts of the watch and of the Charging dock match well, then the watch can be charged properly.
2. Wear/install

1. Wear
   Wear the wristband one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position.
2. Replace the strap
   Switch Flip the switch and take out the wristband
   Tip: Wearing too loosely may affect the accuracy of heart rate data.

Operating Instructions

1.Definition of key function2.Watch dial switch3.Main interface operation Swipe the screen to enter different interfaces (interactive interfacetile diagram)①. Notice：Display notification message content.
②.Status：③.Data bar：④.Function list interface：See below for Function Introduction。
4.Dial data view (default dial)。Long press the screen to switch different data

Function Introduction

1.Icon function introduction

1. Enter the sports window, and choose different sports modes. Change the sports mode on the APP
   1. Start sports Click the sports icon > select the sports type > enter the sports countdown automatically
   2. During sports
      Pause sports: short press the right key
      Restore sports: short press the right key
   3. End sports
      End sports: long press the right key> select the end button on the screen
2. Perform a heart rate test to check your heart rate data for the day.
3. Help you regulate your breathing and relax your mood.
4. View, turn off or turn on the alarm clock. You need to add an z alarm clock on the mobile APP.
5. Control music play on your mobile phone (watch cannot store music)
6. Have the timing and countdown function.
7. Record recent sports
8. settings

Sleep detection: The watch automatically detects sleep all day, please wear a good watch when using it;
Notes: For more functions and operation, please check the VeryFitPro software of the mobile phone.

Product Parameters

Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea, or sauna. But suitable for swimming in swimming pool or in shower (cold water) and shallow beach.

Cleaning and Maintenance

It is recommended to wear and maintain according to the following three points:

1. Keep the product clean;
2. Keep the product dry;
3. Do not wear it too tight.
   Do not use household cleaners to clean the watch, butuse the soap free detergent. It is recommended to use alcohol to scrub stains that are not easy to remove.

Frequently Asked Questions

Mobile APP search for the watch failed

1. It is recommended to update VeryFitPlus to the latest version.
2. It is recommended to close all programs, restart the Bluetooth, and then connect
3. Confirm whether the mobile phone system meets Android 4.4 or IOS 8.0 or above.

The watch received no alerts, text messages or phone calls

1. You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.
2. The iphone needs to be paired with the watch via Bluetooth.(Please check the column of “Synchronous Data” for details)
3. You need to keep your watch connected to Bluetooth.

Bluetooth is often disconnected

1. If the distance between the watch and the mobile phone is too far, the connection effect of more than 7m bluetooth is obviously weakened.
2. Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the bluetooth connection signal.
3. Whether the bluetooth function of the mobile phone is abnormal.

About data backup
The data of the watch is synchronized at least once every 7 days to the mobile phone (the watch end only keeps the data of the last 7 days).
How to restart and restore factory settings
Shutdown operation: Watch > set > shutdown/right-key restart Restore factory settings: connect watch to APP > open APP > device model > more settings

Do I need to keep my bluetooth on when I wear my watch?

1. For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
2. For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone. More detailed questions can be answered with help and feedback in the APP.

Operation steps:VeryFitPro > > help and feedback
Matters Needing Attention

1. Watch data needs to be kept once every 7 days to avoid data loss.
2. The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.
3. Sports mode supports up to 6 hours of exercise at a time.
4. The watch has a waterproof level of IP68 and supports cold water shower, swimming, but not diving.
5. Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry.
6. When your heart rate is measured, keep your arm still during the test.
   please contact us:[email protected]

WillFul Sports Band SW308 User’s Manual

Thanks for choosing our device, please read the user guide carefully before using.

SW308 (V1)

Thank you for choosing the SW308 smart band, which will be helpful aid for your exercise and health. The functions and features of the band are covered in this manual.

Attention: The Bluetooth is not available on this product!

ACTIVATION

This product needs to be charged and activated before used for the first time;

1. Remove the strap;
2. Plug it into the USB to charge and activate the product;
   

Attention: It is recommended not to charge the band with a charger above 5V/1A.

USE

1. Setting time and personal data;
   After the product is charged and activated, please set the time and personal data accurately, so the band can record sports data more accurately;
   
   Press the touch button to switch to the setting interface;
   
   press and hold it to display the time and year setting interface;
   press it to change the year value;
   press and hold it to display the month setting interface;
   press it to change the month value;
   press and hold it to display the date setting interface;
   press it to change the date value;
   press and hold it to display the time setting interface;
   press it to change the time value. At last, press and hold it to exit the time setting interface;
2. Switching time format;
   
   Press and hold the interface to select either 12-hour or 24-hour format; press and hold it again to save and exit the time format setting interface;
3. Gender setting;
   
   Press and hold the interface to display the gender setting interface, where you can select male/female gender. After the gender is selected, press and hold the interface to save and exit the gender setting interface
4. Age setting;
   
   Press and hold the interface to display the age setting interface; press and change the value at the hundreds digit; press and hold it to switch to the tens digit; click it to change the value at the tens digit; press and hold it to switch to the ones digit. After the age setting is completed, press and hold it to save and exit the age setting interface;
5. Stature setting;
   
   Press and hold the interface to display the stature setting; press and change the value at the hundreds digit; after selecting the value at the hundreds digit, press and hold it to switch to the tens digit; after selecting the value at the tens digit, press and hold it to set the value at the ones digit; after selecting the value at the ones digit, press and hold it to save and exit the stature setting;
6. Weight setting;
   
   Press and hold it to display the weight setting interface. For the weight setting method, refer to the stature setting.
7. Unit format setting;
   
   Press and hold it to display the unit format setting interface, on which you can press and switch between the metric/imperial units. After the appropriate unit format is selected, press and hold it to save and exit the unit format setting interface.
8. Step pitch setting;
   
   Press and hold it to display the step pitch setting interface. For the step pitch setting method, refer to the stature setting.

Attention: The more accurate the step pitch is set, the more accurate the distance will be recorded by the smart band.

MAIN FEATURES

1. Time Display
   
2. Step Recording
   
   After the smart band is put on, data will be generated when you move around. The number of steps throughout the day will be recorded, which will be reset at 12:00 pm.
3. Calories
   
   Calories can be calculated based on the age, stature and weight set, as well as the amount of exercise, so please set your personal data accurately.
   The smart band will begin to generate data when you put it on and move around. The calories consumed throughout the day will be accumulated, which will be reset at 12:00 pm.
4. Distance
   
   As the GPS function is unavailable on the smart band, the distance can be calculated with the equation of “Number of steps * Step pitch = Distance”; please set the step pitch as accurately as possible.
   After you move around with the smart band, the smart band will begin to generate data. The distance accumulated throughout the day will be recorded, which will be reset at 12:00 pm.
5. Sleep
   
   Switch to the sleep interface; press and hold it to display the sleep mode option, where you can select NO to enable the sleep mode; press and hold it again to exit the sleep interface. On the homepage of the band, a crescent moon will be displayed to indicate that the band is in the sleep mode; press and hold it again to display the sleep setting interface, where you can select OFF to disable the sleep mode.

ACCESSORIES

Host, strap, manual, after-sale card and gift box.

SPECIFICATIONS

Model No.: SW308
Battery Capacity: 60mAh
Working Voltage: 3.7V
Host Weight: about 18g
Waterproof: IP68
Working Time: 7 days
Working Temperature: -20 °C ~ 40 °C

SAFETY PRECAUTIONS

1. The waterproof rating of the band is IP68. Therefore, it can run properly even if it is exposed to sweat, rain or water when you wash hands, but do not wear it when taking a bath in case it might be exposed to hot water;
2. Keep the band or its accessories out of the reach of children and pets;
3. Do not store the band in a hot place, as the high temperature will shorten the service life of electronic devices, damage its battery and strap;
4. Do not clean the band with aggressive chemicals, detergents or cleaning agents of high concentration; it is recommended to wipe the band with the hand sanitizer free of harmful substances.