Actiiv Tracker User Manual & App [ACUBF024]

Congratulations on purchasing the Actiiv Air Fitness Tracker.

Here is all you need co know about setting up your new fitness tracker smanwatch so you can start tracking!

Device Overview

System and Compatibility

Quick Start Guide

1. Download the ‘VeryFitPro’ app from App Store or Google Play
2. Ensure to charge your device for 30 mins before using for the first time.
3. To charge the device, gently remove the strap with the clasp to expose the USB port, and connect to a DC 5V-500mA USB socket to charge.

Please Note: The straps are not Interchangeable. The strap with the clasp must be fitted on the side with the USB plug.

Connect and Pair

1. Ensure the ‘Bluetooth’ setting on your Mobile is enabled.
2. Keep the device near to your phone for the entire process and open the ‘VeryFitPro’ app. 3. A similar screen to the one below will appear with the device ID.

-For Active Air- Please select ‘ID115’
-For Active Air HR- Please select ‘ID115 HR’
4. Once you can select the ID matching your device, press ‘OK’ to pair, (if you cannot see the ID appear on the app, please tan to turn on your fitness trackers screen and press ‘Refresh’on the app screen, Check your Bluetooth setting to ensure It Is enabled and retry)
5. When paired,your device will vibrate to signal It has successfully paired.
6. Follow the rest of the screen prompts to set up your personal details and goals,
7. Your fitness tracker is now ready to track.

To remove,’Unbind or change the device to sync with a new Phone.
1. Go to the’Device’ page, scroll to the bottom and tap ‘Unbind’
2. Go to your phone’Bluetooth Settings’, find the device and select ‘Forget This Device’.

How to Navigate the Active AIR/ AIR HR

Short Tap
To turn on the screen and to scroll through the different screens

Long Tap
– Activate Stopwatch mode (tap and hold the screen count 3secs)
– De-activate Stopwatch mode (tap and hold until the count down is complete)

Device Screen Mode

Navigating the App Screen
To sync data or update changes to any settings, ‘Swipe’ the screen downward on the ‘Main page. To access graphs, charts and historical data, tap the area on the screen per examples below.

Note: only AIR HR will have the bellow Heartrate screen on the app.

Device Setting
Call Alert – Enable under the tab ‘Device. By adjusting the seconds the device will vibrate after the preferred seconds, by any incoming calls.The name of the caller will display on the screen.

Sedentary Alert – Set a reminder from 15 mins up to 180 mins, and adjust the settings to your preferences. The device will vibrate within these time frames to remind you to be active.

Alarm Alert-Set daily alarm and alerts.The device will vibrate to remind you Double click to stop the vibrations.

SNS Alert – Enables alerts for any incoming messages and stratification. For SNS Alerts to work, the app must be dosed. (eg: for WhgsApp to receive alerts, the App must not be running in the background or be opened)

Take Photo – A photo can be taken from the app or remotely on the device (tap on the device screen when the camera icon appears or shake your wrist)

Wrist Sense -The screen will turn on and light up when the device senses wrist movement.

More :
Display mode – Flip screens from horrizontal to vertical.

Anti lost Alert – Alert user when the phone is too far from the device 5 -10m (distance depending on Bluetooth signal)

Heart rate zone -To set alert when HR exceed set value. (IMPORTANT

NOTE:The HR reading are indication only, not to be taken as precise reading or to monitor any medical conditions)

Do not disturb – Block all Alerts

Restart Device-This is a factory reset, this function will remove/delete all data and history.

For more support please go to www.Actiiv.com.au.
Alternative you can contact us on:
(07) 3359 5711 [email protected]

User Manual

Version 1.0

Congratulations on purchasing the Actiiv Activity Tracker.

Here is all you need to know about setting up your new wearable fitness tracker so you can start walking!

Package Contents

• 1 x Activity Tracker
• 1 x USB Cable
• 1 x User Manual

How to use Actiiv Activity Tracker:

To switch your device ON/OFF, press and hold the button on your device for approximately 5 seconds.

To check time/date/battery life, press the button on your device once.
To Enter/Exit activity mode (‘Step’ or ‘Sleep’), double press the button on your device.

1. When this icon appears, you are in ‘Step’ mode.
2. When this icon appears you are in ‘Sleep’ mode.

In ‘Step’ mode, scroll through each menu below by a single press of the button on your device:

  Steps taken
  Distance in km/miles
  Calories burned
  Percentage of daily goal achieved

In ‘Sleep’ mode, a single press of the button on your device will display

To sync your Actiiv Activity Tracker:

1. Download “Actiiv Trackers” app from iOS or Android store.
2. Open the app, select ‘Skip’ to go to ‘Settings’ page.
3. Set up your Profile, Goals, Alarm etc, select ‘Save.
4. Ensure your device is in ‘Step’ mode. Press the ‘SYNC’  button on your ‘Setting’ page.
5. You will notice a ‘Lock’ symbol will switch from unlock to locked this means app has paired with your device. If message “scanning time out” is displayed, retry after 30 seconds.
6. To remove or unpair your device you will need to press the ‘Lock’ symbol to unlock.
7. Once you have completed steps 1-5, you can sync your device via the Sync page (with the Big SYNC button), provided you have selected “Step” mode on your device.

Important note:

1. Syncing is not automatic, to sync you must follow the steps above in order to update your data.
2. Your device will hold up to 3 days of data/activity, then it will overwrite the existing data.
3. When you make any changes in ‘Settings’ in the app, you must select ‘Save’ for change to apply.

For support please go to www.actiivfitness.com

Activity Tracker

Unpack Activity Tracker and USB Cable

Remove the activity tracker from the wristband and connect to the micro USB cable, then plug into a USB socket or laptop

Your device is now charging

Download Actiiv Trackers app from iOS or Android store

For more information, go to

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FITBAND TOUCH

User Manual

Version 1.1

MODEL: ACUBF001B/K/L

Congratulations on purchasing the Actiiv Fitband Touch.

Here is all you need to know about setting up your new wearable fitness tracker smartwatch so you can start walking!

Package Contents

• 1x Fitoand Touch
• 1x Charging Cradle
• 1x USB Cable
• 1x Start Up Guide

How to navigate the Fitband Touch

There are three actions you can use on the Fitband Touch:

1. Double tap the screen. This will wake the screen up.
2. Swipe, left or right. This will switch through the various screens.
3. Tap. This will ‘select’ whatever you have tapped on.

Quick Start Guide

1. Charge Fitband Touch device.
2. While the Fitband Touch is charging, log into the Fitband App on your phone and follow the prompts to ‘pair device’.

Charge your Fitband Touch

Line up the gold dots on the underside of the Fitband Touch with the gold prongs in the charging cradle, close the cradle (the latch needs to be completely slid to the right).

Plug the cradle into power outlet (computer or wall unit) via USB cable.

When you see your Fitband Touch screen light up you will know that it is charging correctly.

A wall charger or desktop computer will fully charge your Fitband Touch in 90 minutes.

A laptop should also charge it in 90 minutes, but some laptops stop charging if their screen is asleep.

Log into Fitband App

Download the Fitband App from the App store or Google Play.

If you are a new user, go ahead and create a new account.

Pair your Fitband Touch

Activate the Bluetooth function on your smart device.

New users, after you have created your account, you will be automatically prompted to pair your Fitband Touch. Please ensure the Fitband Touch is on charge throughout the duration of pairing, and keep your smart device as close as possible. A four digit pairing code of numbers and/or letters will be displayed on your Fitband Touch, when prompted enter this code.

If you are a current Fitband App user, select the slide out menu () and tap on pair device () . Follow Prompts to start pairing.

Bluetooth Pairing Request

To allow your Fitband Touch to receive incoming calls and text messages, you will see a pop up on your smart device asking you if you want to pair with another device. The device ID will be much longer than the 4 digits you just entered, but as long as the device name starts with a “H’, you are pairing with the correct device, Tap “pair” on the pop up to continue the syncing process.

Connecting

The Fitband Touch will go through 4 steps to completely connect – activating Bluetooth, identifying device, contacting server and registering account.

If you have trouble pairing your Fitband Touch try the following troubleshooting steps:

• Press the screen regularly
• Remove the Fitband Touch from the cradle and replace it
• Turn your phone/tablet’s airplane mode off and on
• On Android? Try clearing the data cache from the Fitband App an your phone’s app manager
• Force quit the app and relaunch it
• Reset the band (use a paperclip to press the button on the cradle with the Fitoand Touch inside and the cradle plugged in)

Check for updates

Once your Fitband Touch is connected to your account, we always check to make sure you have the latest and greatest firmware. If you need an update, it should start automatically. Be sure to keep your Fitband Touch plugged in and charging, and close to your phone/tablet.

Happy tracking!

For support please go to www.actiivfitness.com

Fitband Touch

ACTIVITY FITBAND

User Manual

Version 1.0

MODEL: ACUBF002K

Congratulations on purchasing the Actiiv Activity Fitband.
Here is all you need to know about setting up your new wearable fitness tracker smartwatch so you can start walking!

Package Contents

• 1 x Activity Fitband
• 1 x Charging Cradle
• 1 x USB Cable
• 1 x Start Up Guide

Quick Start Guide

1. Charge Activity Fitband device.
2. Goto www.actiivfitness.com, select Activity Fitband, and follow the instruction to set-up your device

Charge your Activity Fitband

Line up the gold dots on the underside of the Activity Fitband with the gold prongs in the charging cradle, close the cradle (the latch needs to be completely slid to the right).
Plug the cradle into power outlet (computer or wall unit) via USB cable.
When you see your Activity Fitband screen light up you will know that it is charging correctly.
A wall charger or desktop computer will fully charge your Activity Fitband in 90 minutes.
A laptop should also charge it in 90 minutes, but some laptops stop charging if their screen is asleep.

Pair your Activity Fitband

Ensure Bluetooth is switched to “On” on your phone. Install and run the App, follow the prompts on the App to set-up and pair your device.

Connecting

The Activity Fitband will go through 4 steps to completely connect-activating Bluetooth, identifying device, contacting server and registering account.

If you have trouble pairing your Activity Fitband try the following troubleshooting steps:

• Press the screen regularly
• Remove the Activity Fitband from the cradle and replace it
• Turn your phone/iPad’s airplane mode off and on
• On Android? Try clearing the data cache from the Fitband App on your phone’s app manager
• Force quit the app and relaunch it
• Reset the band (use a paperclip to press the button on the cradle with the Activity Fitband inside and the cradle plugged in)

Check for updates

Once your Activity Fitband is connected to your account, we always check to make sure you have the latest and greatest firmware. If you need an update, it should start automatically. Be sure to keep your Activity Fitband plugged in and charging, and close to your phone/tablet.

Happy tracking!

For support please go to www.actiivfitness.com

Activity Fitband