User Manual
BW-KB1

Connect the computer through USB

Connect the computer through Bluetooth

Hold down [Fn]+[Q]/[E]/[R]/[T] for 3 seconds, until [Q]/[W]/E]/[R]/[T] flashing

Hold down [Fn]+[Tab] for 3 seconds, press [FN] while hold down [Q]/[Q]/[E]/[R]/[T] to connect the host that has been bounded by Bluetooth

Specification

Function Key

Indicator light

Note
The back light tums off after 1 minute of inactivity.

Enter deep sleep after 30 minutes of no operation. Bluetooh disconnected, press the button to automatically reconnect.

Company: Lotus NL B.V.
Address: Koningin Julianaplein 10, 1e Verd, 2595AA, The Hague, Netherlands.
E-mail: [email protected]
Tel: +31644168999

Setup

Turn off the switch at the bottom of the keyboard, and the toggle switch displays the 0 symbol

Turn on the switch at the bottom of the keyboard, toggle the switch to display the-symbol After the Bluetooth channel is selected, the FN+P key enters the pairing mode, the P key light flashes during the pairing, and the pairing succeeds and returns to the normal mode

FN+Q or W or E pairing: In the Bluetooth state, press FN+Q or W or E to select a channel, the Q or W or E key flashes, then press FN+P to enter the pairing mode, the P key light flashes, pairing Success, the light returns to normal mode. Back- to- back: FN+Q or W or E key for device back- to- back

FN+ Tab switch to Bluetooth, TAB key white light display, wired normal display

Blitzwolf True Wireless Earbuds
BW-FYE4 User Manual

Packing lists

BW-FYE4 ×1
3 pairs of Silicone Eartips (size: S/M/L, M pair is already attached.)
User manual*1
Micro USB Charging Cable×1

Product Diagram

Long press
Short press
Microphone
Press for twice
Press for three times
Charging box switch key(front)
Battery case/Storage compartment port
Silicone Ear Caps Selection
For the best audio experience and comfort, please choose the right ear cap size to wear.

Specifications

• Model name — BW-FYE4
• Chip — RTL8763BFR
• Frequency Range — 2.402-2.480GHz
• Support Protocol — HSP/HFP/A2DP/AVRCP
• Transmission Range — 10m
• Sensitivity — 98dB
• Frequency Response — 20~20000Hz
• Charging Input Standard — Touch spot, DC 5V/0.5-1.0A
• Battery Type — 3.7V lithium battery (Headsets and Charging Box)
• earbud
  
  • Charging Time — About 1.5hours
    
  • Working Time — About 4.5 hours
• Electricity supply times of charging box — 4

Charging

Charging the earbuds
Simply put the earbuds into the charging box and close the lid. The indicator light of the earbud is red during charging. When charging is complete the indicator will turn blue and then turn off in 1 minute. The charging box will turn off when the 2 earbuds are fully charged.

Charging the charging box
To charge, connect the USB cable to the BW-FYE4 and a USB power source. The remain battery is indicated by the the four white lights on the charging box.

Operating Instructions

• Power on: Automatically powers on when taken out of the charging box/Long press the Multi-function button for 4 seconds if they are not in the charging box.
• Power off: Automatically powers off when placed into the charging box./Long press the Multi-function button for 4 seconds if they are not in the charging box.
• Play/Pause: Short press either of the Multi-function buttons.
• Wake up Siri: Long press the Multi-function button of any earbud for 1.5 seconds.
• Answer Call: Short press the Multi-function button once when receiving an incoming call
• Reject Call: Long press the Multi-function button for 1.5 seconds when receiving an incoming call
• Hang up: Short press the Multi-function button once during a call
• Next song: Short press the Multi-function button on the earbud for twice.
• Previous song: Short press the Multi-function button on the earbud for three times.

Stereo Pairing

1. Take both earbuds out of the charging box. The earbuds will automatically power on. The left earbud will pair to the right earbud automatically. The light of the left earbud will flash red and blue alternately and the right earbud’s indicator light remains off.
2. The right earbud “BW-FYE4 ” is the earbud you need to pair your device to for stereo sound. Activate Bluetooth mode on your device, search for nearby devices, and then pair to “BW-FYE4.”

Mono Pairing

If you only want to use one earbud, take out the L or R earbud and Bluetooth pair your device to the corresponding side, “BW-FYE4” or “BW-FYE4 R”.

Troubleshooting

The earbud won’t pair with my device.

1. Confirm that the earbuds are powered on. If they are not powered on, put them back into the charging box and take them out again.
2. Confirm that the earbuds are in pairing mode.
   In stereo mode, the indicator light of the left earbud flashes red and blue alternately, and the indicator light of the left earbud flashes blue slowly.
   In mono mode, the indicator of the earbud flashes red and blue alternately. If not in pairing mode, please check whether the earbud has automatically paired to another device. If it is paired to another device, turn Bluetooth mode off or unpair the “BW-FYE4 /R” from the already paired device.
3. Confirm that the earbud is within the range of 10 meters.

Sound is only playing from one earbud in stereo mode.

1. Check that both earbuds have battery power remaining.
2. Long press to power off both earbuds. Then long press to power on both the earbuds simultaneously. Hold the Multi-function button until you hear a second audible tone. The process takes about 20s and completely clears the pairing list. Then, put the earbuds back into the charging box, and try the pairing process again. If there are any other signal abnormalities, do as above to reset the earbuds.

(Waste Electrical& Electronic Equipment) This Marking indicates that it should not be disposed with other household wastes or commercial wastes. To prevent possible harm to the environment or human health, please separate this from other types of wastes and recycle it.

BLITZWOLF BW-GS3 Computer Game Speakers with RGB Light

Product Overview

1. Mic socket
2. Power switch, Volume, LED mode
   1. Long press on/ off
   2. Rotate main volume+/-
   3. Short press LED light mode switch
3. Headphone socket
4. Audio/Headphone Switch
5. LED lamp
6. USB 5V
7. Green 3.5mm audio cable
8. Pink 3.5mm microphone cable

Product Parameters

• Model BW-GS3
• Power 5W*2
• Speaker Unit 2 inch*2
• Power Supply DC 5V
• Product Size W479*D66*H51 mm

Company: Lotus NL B.V.
EC R E P Address: Koningin Julianaplein 1 0, 1 e Verd, 2595AA, The Hague, Netherlands.
E-mail: [email protected]
Tel: +31644168999

Product Information

1. Power Button
2. Power indicator’
3. US82.0
4. US82.0
5. US83.0
6. US83.0
7. TF Card
8. LAN
9. AV
10. VGA
11. HD
12. DC

Connected Device

1. Tum on the TV or monitor and change the video output to be HD
2. Connect the PC to the HD connector of the TV or monitor with a HD cab e
3. Connect the power adapter into the wall socket. and the other” end into the DC port on the PC
4. Toe, the device starts md LED light on the box is on

How To Enter BIOS Configuration

Keep pressing the ESG button when Turing power ON, you can enter BIOS con1iguratlon

How To Install The Hard Disk

Standard 2.5 inch SATA hard drive supported, up to 2TB.

1. Take out ~he two screws at the bottor1 of Ire hard drive expansion box.
2. install e 2.5-irmh HOD or SSD (support up to 2TB) to the expansion bay.
3. Screw the two screws back.

Others

Specifications

Package List

[email protected]

[email protected]