CREATE Mini Box Mini Fridge

Thank you for choosing our fridge. Before using the appliance, and to ensure the best use, carefully read these instructions. The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appli­ance. We assume no liability for customer failing to comply with these requirements.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be ob­served.

• When the power cord is damaged, do not touch the AC power cord with your hands to avoid danger.
• When using the product, please note that the voltage used is absolutely correct (the applicable voltage of this product is clearly marked on the product nameplate).
• The vehicle-used function can be only activated when the vehicle is running. Be sure to turn off its power and unplug the vehicle-used power cord after the vehicle stops running.
• The product should not be used for transporting or loading acid-corrosive items, and the product should not be wiped with corrosive solvents.
• Do not block the ventilation openings in normal use.
• Use this product in strict accordance with the instructions, please do not disassemble the internal parts without permission.
• Under the heating condition, the temperature inside the appliance can be controlled within a temperature at about 60 °C ± 10 °C, please pay attention to high temperature to avoid burns.
• When switching between “Cool” and “Heat” settings, be sure to turn the switch to “OFF” setting firstly and then switch to another setting after 15 minutes.
• The product should be stored in a place which is tidy, and a ventilation channel with a width of 10cm should be kept around it. And do not put the product at rainy places or places with heat sources, such as electric stoves, LPG stoves, heat pipes or flames.
• This mini warmer and cooler should be cleaned regularly if there is residual water inside it.
• This mini warmer and cooler is not a refrigerator, and it is not allowed to be used for freezing fresh meat. It is better to put frozen foods and drinks into it for storage.
• Please do not open the door frequently and the door cannot be opened for too long in order to keep contents inside it fresh.
• Children should be supervised to ensure that they do not play with appliances.

DESCRIPTION

• This product can not only be used for cooling but also for warming. It is of simple and cute appearance, compact, easy to carry, as well as of long service life and low power consumption. It is a good helper for home and travel use.
• This product keeps the concept of “Green and Environmentally-friendly”. And this product uses semiconductor refrigeration technology, it has no bulky compressor and no refrigerant to avoid noise and fluorine pollution. It is an environmentally-friendly refrigeration product without pollution.
• It is particularly suitable for drivers, tourists, workers and students due to its mul­ti-function, light weight, small size and easy-to-carry.
• This product has simple structure and long service life, and it is convenient to main­tain, and is of low power consumption and strong shock-resistant capability.
• It has a long service life, and the life of the cooling module can reach 50000 hours.

OPERATION

VEHICLE USE (DC 12V) 

1. Turn to the “Cool” setting.
2. Align the vehicle-used power cable with the socket of the vehicle (DC12V) , and then insert it well in position.
3. Then insert the cigarette lighter end of the vehicle-used cord into the cigarette lighter socket of the vehicle.

HOME USE (AC 100V-240V) 

1. Turn to the “Cool” setting.
2. Insert one end of the household power cord into the AC socket of the minifridge.
3. Insert the other end of the household power cord into the household outlet.

COOLING AND HEATING SETTINGS 

1. When cooling, turn the “Cooler / warmer switch” to “Cool” setting, the green indi­cator lights up and the fridge starts to cool.
2. When heating, turn the “Cooler / warmer switch” to “Heat” setting, the red indica­tor lights up and the appliance starts to heat.
3. When you need to turn off the fridge, turn the switch to the middle “OFF” position, and the appliance stops working.
4. When you want to switch between “Cool” and “Heat” settings, be sure to turn the switch to “OFF” setting firstly and then switch to another setting after 15 minutes. Do not directly make switch between “Cool” and “Heat” setting as the cooling system of the fridge may be damaged due to the drastic change of temperature.

NORMAL AND SILENT MODES 

• Normal mode: The fan runs at higher speed under normal mode, it is recommended to select this mode in the daytime.
• Silent mode: The fan runs at lower speed under silent mode, it is recommended to select this mode at night.

TIPS FOR OPERATION 

• The closer to the cooling position, the better the cooling effect.
• Metal cans offer better results if you want to enjoy cool drinks.
• Fruits such as watermelons can be cut into two halves and be sealed by plastic wrap, and then make its flat surface be attached to the inner wall of the minifridge.
• To enjoy fresh meals, firstly put the meal into a flat stainless steel plate, and then seal the plate with plastic wrap, finally, make the bottom surface of the plate be attached to the inner wall of the minifridge.
• Cosmetics and medicines should be spread on the inner wall of the minifridge flat­ly. The closer to the cooling module, the better the cooling result.

SUGGESTED TEMPERATURES

1. Fruits: The suggested temperature for refrigerating fruits is about 0-10 °C, which can maintain the quality and flavour of the fruits and extend their freshness period.
2. Beer: The suggested temperature for storing beers should be between 0-15 °C, preferably about 10 °C. And bottled beer should be stored between 5-25 °C.
3. Tea: It can be kept better if the temperature is controlled between 5-10 °C, and the flavour of the tea can be maintained for more than 1 year.
4.  Cosmetlcs / skincare products: Generally, the temperature should be below 25 °C, and the temperature for storing cosmetics or skincare products is 10-18 °C. Too high or too low temperatures will deteriorate the cosmetics, and those (skincare products) which are cooled will have a good cooling effect for the skin which is hot, and it will make the skin shrink and be comfortable.
5.  Medicines: The temperature for refrigerating the household medicines should be set according to the requirements of the medicines. Generally, the refrigerating temperature is below 20 °C.

SCOPE OF APPLICATION

• Application places: Car, home, yacht, office, bedroom, cosmetics store, etc.
• Suitable for refrigeration: Fruits, bottled/canned beverages, tea, medicines, milk and cosmetics etc.
• Not suitable for refrigeration: Frozen foods such as ice cream and others, chemical agents, and meat etc. Cooked food can be stored for 5-8 hours.

TROUBLESHOOTING

If the minifridge is not energized, please follow the steps below to operate:

1. Check and make sure the power cord is properly connected to the power outlet.
2. Check and make sure the appliance is turned on.
3. Check and make sure the AC/DC switch of the appliance is operated correctly.
4. Check and make sure the cigarette lighter is properly connected and turned on, and please clean the base of the cigarette lighter with a non-metallic brush if it is contaminated.

If the cooling effect is not good, please deal with it according to the following measures:

1. Check and make sure the fan is running normally. If not, please contact after-sales service. (It is recommended to clean the fan every 3 – 5 months.)
2. Touch the four screws inside the minifridge to check if it is cold. If not, please contact after-sales service.

CLEANING AND MAINTENANCE

1. Before cleaning and maintenance, the “Cooler / warmer switch must be firstly turned off and then unplug to disconnect the power source.
2. Wipe the dirt and dust on the surface of the body with a piece of soft cloth dipped with detergent. And you can use a piece of soft cloth dipped with warm water to clean the inside of the appliance.
3. The body must not be rinsed with water, especially the parts of the body such as the ventilation openings of the switch socket, otherwise, it will cause damage to the product and a risk of electric shock.
4. Please get in touch with our customer service in case you encounter problems during use.

In compliance with Directives: 2012/19/EIJ and 2015/863/EU on the restriction of the use of dangerous substances in elec• tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of ns service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specializing In separate collection of
on waste a one for electrical one and basis. The electronic adequate equipment, separate or given collection back for to the retailer subsequent at the start-up time of o f”the purchasing equipment new sent similar to be equipment, recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Documents / Resources

CREATE Mini Box Mini Fridge [pdf] User Manual Mini Box Mini Fridge

CREATE IKOHS Electric Towel Rack

WELCOME

Thank you for choosing our towel rack. Before using the appliance, carefully read these instructions to ensure it Is used correctly. The safety precautions enclosed will reduce the risk of death, Injury and electrical shock when correctly followed. Keep the manual In a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. We assume no liability for customers failing to comply with these requirements.

SAFETY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

•  During the whole process of installing the appliance, please do not knock the glass and please handle with care during the installation.
•  WARNING:
  The heater must not be used if the glass panels are damaged.
•  The appliance must not be located immediately below a socket outlet.
•  It is forbidden to cover the glass surface of the appliance with articles such as a towel or clothes.
• In normal working status, please do not touch the glass surface of the appliance.
•  Always unplug heater when not in use.
•  Choose the Installation position of the product according to the requirement, and the appliance shall be kept away from burning or explosive articles.
•  If you are going to use the appliance in the bathroom, the appliance must be connected to a waterproof socket which must be installed where the people in the bath tank or the people in bathing area could not reach it.
•  If the supply cord of this appliance Is damaged, It must only be replaced by a repair shop appointed by the manufac­ turer or its agent, as special purpose tools are required.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capa­bilities, or lack of experience and knowledge, unless they have been given supervision or Instruction concerning use of appliance by a person responsible for their safety.
•  Children should be supervised to ensure that they do not play with the appliance.
• Joists, beams and rafters shall not be cut or notched to Install the appliance.
•  The fixed wire must be in accordance with the wiring rules, having a contact separation in all poles that provide full disconnection under overvoltage category 111 conditions.
•  Children under 3 years old should be kept away unless continuously supervised.
•  Children aged from 3 years old and under 8 years old shall only switch on/off the appliance provided that It has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years old and under 8 years old shall not plug in, regulate and clean the appliance or perform user maintenance.
• CAUTION:
  Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
•  This appliance can be used by children aged from 8 years old and above and persons with reduced physical,sen­sory or mental capabilities or lack of experience and knowledge If they have been given supervision or Instruction concerning use of the appliance in a safe way and understand the ha.zards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
•  This product applies various safety protection measures. Since it has overheat protection device, when the appliance exceeds the range of normal working temperature because of the cover of external things, the built-In temperature sensing device will stop the working of the appliance, to avoid any danger.
•  WARNING:
  This appliance Is for household Indoor use only. In order to avoid overheating, do not cover the heater.

PARTS LIST

1. Tower hanger
2.  Front panel
3.  control panel

INSTALLATION INSTRUCTIONS

• PROCEDURE 1: Before installing the appliance, make a mark of installation position on the wall (the wall needs to endure the weight of the appliance). When making the marks, they need to be parallel with the ground. Then drill four holes with bore of 10 mm and depth not smaller than 60 mm, make sure the hole to be vertical with the wall, and ensure the lateral distance and vertical distance between the holes is correct.
•  The distance between the holes should be as below:
• WARNING:
  In order to avoid a hazard for very young children, this appliance should be installed so that the lowest heated rail is at least 600 mm above the floor.
•  Fix the 3 supports on the wall with the expansion screw. Please note that the fixed supports can be moved to adjust the position in order to fix the glass panel.
•  PROCEDURE 2:
  Firstly remove the protective film at the back of the glass, then install the glass panel onto the fixed support on the wall. Please note that you can adjust the position of the fixed support on the wall to install the glass panel. Then tight the screws on the side of each support cover.
• When finishing the Installation, It shall be firstly connected to the power to test the appliance, so as to ensure that Its function Is available. The test method is as below:
• Firstly remove the protective film on the front glass surface of the appliance and press the switch on the bottom of the appliance.
•  TOWEL RAILS:
  Get one of the towel rails and fix on the upper wall supports wtth 2 M4.,0 screws and tight the screws. Use the same way to fix another towel rail on the lower support wtth 2 M4*1 O screws and tight the screws.

HOW TO USE THE TOWER RACK

•  Turn on the heater by pressing the power button. The LED will display room temperature, then please use touch COl}­ trol or remote control to set power, temperature and time.
•  If the appliance is not used for a long time, switch the power button off and unplug the appliance.

CONTROL PANEL
Insert the plug a suitable power socket. The touch screen buttons located on the product correspond to the remote control functions.

1.  Mode
2.  Temperature
3.  Power
4. Timer

Power
When the product is on, press ·power•. The upper part of the display shows the temperature. The heater is working at low-power heating conditions.
Mode
It enters heating mode.

Temperature
Press the temperature button. The temperature can be set from 5 •c to 40 •c. Internal temperature is displayed every time the appliance is started up. The temperature can be set when the appli· ance is on stand-by or heating. When the room temperature reaches the set level, the high-temperature power stops and the low-temperature power remains active. When room temperature is two degrees over the set temperature, both the high and lower temperature powers will stop operating. The machine will begin operating again only when the temperature decreases two degrees with respect to the set temperature. 0Timer The timer button can be set to start or stop the appliance at the desired time, with a time interval between 1 and 24 hours.

OPERATION FOR REMOTE CONTROL

Insert the plug in a suitable power socket.The touch screen buttons located on the product correspond to the remote control functions.

1.  Power button
2. Mode
3. Temperature
4.  Timer
5.  Lock

child Lock
Press the child clock button for three seconds to lock the heater. After pressing the Child Lock button for three seconds again, the heater is unlocked. You can also press the mode button on the control panel for 3 seconds to lock the screen or unlock it.

APP CONNECTION

CREATE HOME application is available for Android and iOS (look for the app on Google Play or App Store or scan the QR code below). Depending on the provider, there may be costs involved in downloading the app. This appliance allows you to operate the appliance via your home network. A prerequisite is a permanent WIFi connec­tion to your router and the free app CREATE HOME.We recommend disconnecting the appliance from the power supply when you are away from home to prevent uninten­tional switching on while you are away.

How to connect to the app

•  Install the CREATE HOME app and create a user account.
•  Select the time zone to enter the account and click to get the verification code.
• Enter the received verification code for verification.
•  Set up a login password and log in the app.
•  Click on “Add device•(+) and then on the category corresponding to the towel rack (heater).
• Click on •confirm• when the indicator light is blinking rapidly.
•  Enter the password of your Wl·FI network and confirm.
•  While connecting, make sure your router, mobile phone and device are as close as possible. Afterward, your towel rack will be successfully added to your CREATE HOME app.

CLEANING

•  Clean the heater with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage. Make sure no water enters the control panel or gaps in the casing.
• Do not run the unit until completely dry.
•  Place the heater in its original box or cover to protect it from dust when not in use.
• Store it In a cool dry place.

Disposal

In compliance with Directives: 2012/19/EU and 2015/863/EU oo t’1e res1rlctioo of the use of dangerous substances in electric and electronic equipment as well as their wasle disposal. The symbol with the crossed dustbin shown oo the package Indicates that the product at 1he end of Its service Ille shall be collected as separate waste. The<efore, any products that have reached the end of their useful life must be given to waste disposal centers specializing In the separate collection of waste electrical and electronic equipment. or given back to the retailer at the time of purchasing new similar equipment oo a one-for-one basis. The adequate separate collection for the subsequent start·up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the aP11aratus. Abusive disposal of the product by the user Involves the application of the administrative sanctions according to the laws.

CREATE Fullmix Retro Hand Blender Batidora De Mano

SAFETY WARNINGS

Please read the instructions carefully before using the appliance. Always disconnect the appliance from the supply if it is left unattended and be­ fore assembling, disassembling or cleaning.

• This appliance must not be used by children. Keep the appliance and its cord out of the reach of children.
• This device can be used by children and people with reduced physical. sensory or mental capacities or with a lack of experience and knowl­edge if they have been supervised or ins1ructed in the use of the device in a safe way and understand the dangers that it entails.
• Children must be supervised to ensure that they do not play with the appliance.
• Incorrect use of the mixer can cause problems with the appliance and injury to the user.
• Make sure the circuit voltage and frequency correspond to those indi­cated on the rating label of the appliance.
• Always disconnect blender from supply if left unattended and before assembling, disassembling, cleaning.
• Do not connect the appliance to the mains until it is completely assembled and always unplug it before disassembling the appliance or han­dling the blade.
• Do not lift or operate the appliance if the power cord or plug is damaged, or if the mixer is malfunctioning or has been dropped or damaged in any way, In case of damage, contact the after-sales service. A damaged cord or plug must only be replaced by the manufacturer or a qualified person to avoid injury.
• Do not let the cord hang over the edge of a table or counter. Do not allow it to come into contact with hot surfaces, avoid proximity to open fires and all types of heat and sources of ignition.
• The blades are very sharp! Handle them with care.
• Keep hands and utensils out of the bowl while mixing to reduce the risk of serious injury to persons or damage to the mixer. A spatula can be used, but should only be used when the mixer is not running,
• Never immerse the power cord, plug, or power base of the mixer in water or other liquids. If the appliance falls into water, immediately unplug it from the mains and ask an expert to inspect it before using it again. It can cause fire, electric shock, injury or death .
• Do not touch the moving parts of the mixer.
• Do not allow the cord to come into contact with hot surfaces.
• Do not mix hot liquids .
• Neither the measuring cup nor the chopping bowl are microwave safe.
• Short operation (only three times). Use the appliance with soft food no more than 1 minute and with hard food no more than 15 seconds. Repeat s 3 cycles for good use .
• To reduce the risk of injury, never place the cutting blade on the base
  without first putting the bowl in place .
• Make sure the cover is tightly closed before use,
• Clean the hand mixer with a dry cloth.
• • The instruction should include details on how to clean food contact sur­faces and accessory run times and speed settings.
  You should warn about possible injuries from misuse. Care must be tak­en when handling the sharp blades, when emptying the bowl, and dur­ing cleaning .
• Turn off the appliance and disconnect it from the mains before chang­ing accessories or approaching parts that move during use.
• This appliance is not designed for use by children or others without as­sistance or supervision if their physical, sensory or mental abilities pre­vent them from using it safely.

LIST OF PARTS

1. Sspeed control
2. Ignition switch
3. Turbo switch
4. Mixer shaft
5. Lid of the jar to chop
6. S-blade
7. Glass to chop
8. Stand for the beater
9. Whisk 1
10. Measuring glass

INSTRUCTIONS FOR USE

HOW TO USE THE HAND MIXER
The hand mixer is ideal for making dips, sauces, soups, mayonnaise, and baby food, as well as for blending and smoothies.

1. Insert the blender rod into the motor unit until it locks.
2. Put the hand mixer in the bowl. Then press switch I or switch II.
3. Unplug and then press the eject button to remove the wand from the blender after use.

You can use the hand mixer in the measuring cup and also in any other container.

HOW TO USE YOUR WHISK
Use whisk only for whipping cream, whipping egg whites, and mixing pre-mixed cupcakes and desserts.

1. Insert the beater into the beater holder, and then place the gearbox on the motor unit until it locks.
   Put the whisk in a bowl and only then. Press the switch to operate it.
2. Unplug and then press the eject button to remove the gearbox after use. Then remove the beater from the gearbox.

HOW TO USE THE CHOPPING CONTAINER 

1. Insert the blade into the beater holder and then place the chopping bowl in the motor unit until it locks.
2. Do not chop extremely hard foods, such as ice cubes, nutmeg, coffee beans, and other grains.

CLEANING

Clean the motor unit and the lid of the chopper bowl only with a damp cloth. Do not immerse the motor unit in water!

• All other parts are dishwasher safe. However, after processing very salty foods, you should rinse the blades immediately.
• Also, be careful not to overdose on cleaner or descaler in your dishwasher.
• When processing colored food, the plastic parts of the appliance may become discolored. Clean these parts with vegetable oil before putting them in the dishwasher.
• Unplug the appliance before cleaning.
• The blades are very sharp, attention.

USER GUIDE (FOR THE CHOPPER BOWL) 

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances In eclectic and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package Indicates that the product at the end of Its servlet Ille shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment. on a one for one basis. The adequate separate collection for the subsequent start-11p of the equipment sent to be recycled, treated and disposed of In an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user Involves application of the administrative sanctions according to the laws.