JUST WIRELESS 20086 Dual Port FM Transmitter

FEATURES & SPECIFICATIONS

• FM Transmitter
• Device charger (USB Charging Port)
• Source input (3.5mm Jack Port)
• Source input (USB Flash Drive Port)
• LCD Display Screen
• Input: 12-24V, Output: 5V DC/2.1A
• Plays MP3s & WMAs via Flash Drive

QUICK USER FUNCTION GUIDE

PLAY/STOP
Pressing the “Channel” Button plays music
Pressing the Button again pauses playback

ADJUSTING VOLUME
Holding down “Next” Button increases volume
Holding down “Previous” Button decreases volume

CHANGING CHANNEL
Press “Channel” Button & hold until Frequency flashes, then press “Next” Button to increase the frequency or “Previous” Button to decrease the frequency

CHOOSING MUSIC
Press “Next” button to play next track or “Previous” button to play previous track

OPERATIONS

WORKING THE FM TRANSMITTER

1. Plug the FM Transmitter into your vehicle’s 12V Port.
2. Connect your device to the Transmitter via the supplied 3.5mm Aux Cable.
3. Tune your radio to an unused FM station, where you should only hear static, then match to the same frequency on your FM Transmitter unit. To change frequency press the “Channel” Button and hold until frequency on display is flashing, then press “Next” Button to increase the frequency or press “Previous” Button to decrease the frequency. The Transmitter will play music through your car stereo once the frequency is matched.
4. If using a USB Flash Drive containing MP3/WMA files, insert it into the left USB Flash Drive Port (indicated by the “Music” symbol); it will play the music files automatically. Only the left USB Flash Drive Port can serve as a USB Reader.

LIFE TIME WARRANTY
For Warranty information, please visit our website.

www.justwireless
© 2021 Just Wireless

WORKING THE CAR CHARGER

• When unit is plugged in to your vehicle’s 12V Port, connect your device to the right USB Charging Port (marked “2.4A”) with a compatible USB cable (not included).
• Note: You can still play music while charging your phone.

JUST WIRELESS 20087 Wireless Hands-Free Bluetooth FM Transmitter

Safety Instructions

Please read this manual carefully before using

• Keep these instructions handy
• Don’t try to disassemble device by yourself
• Don’t expose directly to sunlight or open flames which can cause potential damage
• Keep your attention on the road and do not operate product while driving

Features

• Input 12V-24V
• FM transmitter: 88.1-107.9 MHz range
• Bluetooth· hands-free call
• Streaming music from smartphone to car audio
• system via FM transmitting
• Dual USB ports: Quick charging 3.o·, USB flash drive playing
• Supports TF card playing
• Car battery monitor

Specifications

• DC input: 12V-24V Bluetooth·: vs.a
• Bluetooth·maximum distance: 10 meters/32 feet
• USB 1: QC 3.o·sv/2.4A,9V/2A, 12V/1.5A
• USB 2: USB flash drive playing or 1A
• FM channels: 88.1 -107.9Mhz
• FM transmitting distance: < 2 meters/6.56 fl
• Audio format: MP3, WMA, FL.AC, WAV
• USBcapacity support: 64GB (max)
• TF card support: 32GB (max)
• Working temperature range: -4F to 104F
• Storage temperature range: -40F to 185F

Wireless Transmitter

1. LED display
2. Microphone
3. Previous song
4. Next song
5. Multifunction Knob button: change frequency/volume + & – I Call Answer & Hang up
6. USB 1: QC3.0: 5V/2.4A,9V/2A,12V/ 1.5A
7. USB 2: USB flash drive playing

Installation

1. Plug the device into your car cigarette lighter socket.
2. LED display lights up and shows: 13.5- bl: -107.6
3. Bluetooth• connection:
   After initial sequence is displayed, the device is ready to pair with voice prompt: “Waiting for connection.” On your smartphone, enable Bluetooth·function, search available devices, select •~ust Wireless” and pair. Once connected, there is a voice prompt: “Bluetooth’ connection success.”
4. Turn on FM on your car radio, and find a vacant (unoccupied) channel. Then adjust the frequency on the device to match the frequency on your car radio.
5. Adjust the FM transmitter frequency: Press and hold the multifunction knob button until the frequency display flickers, rotate the knob button to adjust the FM transmitting frequency to be the same as your car radio.

Playing Music

Play music from your phone
After steps 1-5, you can start playing on your smart phone, the music will stream by Bluetooth· A2DP function, from your phone via FM transmitting to car radio, and come out from car stereo system.

Play music from your USB flash drive
Plug USBflash drive into the right USBport with MUSIC icon. Device will recognize and play automatically.

Play music from your TF card

Insert TF card to TF card slot device will start to recognize it with display “l:.F” and start playing automatically All operations are same as USB flash drive playing mode. See image following.

How to switch playing among  Press” ►►!” and hold until LED displays bl:. or 1:.F(orUSb ), then playing will transfer to mode which it shows.

Hands-Free calling

After you get ready for playing, you can also start to use hands-free functions.

Under music playing status ( flash drive), if there is a call coming, it will switch to call mode automatically, after hanging up, it will switch back to playing mode automatically.

Bluetooth and associated product marks are the trademarks of an independently owned and operated company. This product has not been licensed by this company. Qualcomm Quick Charge is a product of Qualcomm Technologies, Inc. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Quick Charge is a trademark of Qualcomm Incorporated. All Qualcomm Incorporated trademarks are used with permission.

FCC Statment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant ta part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AH8S-20087

For Warranty information, please visit our website.
www.justwireless.com
140 58th St, Brooklyn, NY 11220
2021 Just Wireless