Keurig – ItsManual

Keurig K-Compact Coffee Brewer User Manual

ItsManual — Sat, 19 Nov 2022 10:58:11 +0000

Keurig K-Compact Single Serve Coffee Brewer

Before You Brew

1.Plug & Place

Remove packing tape from brewer and plug into a grounded outlet.
Place a large mug (10 oz. minimum) on the drip tray plate.

2. Rinse & Fill

Remove the water reservoir lid, then lift the reservoir straight up to remove it.
Rinse reservoir with fresh water and fill to the MAX line.
Replace water reservoir, making sure the lock tabs engage with the brewer.
Replace lid.
NOTE: Do not use distilled water.

3. Power On

Press power button—the green power light will illuminate.
The brewer will automatically begin heating the water. This will take about 4 minutes. Once the heating sound stops, the brewer is ready.

4. Lift & Lower

Lift and lower the handle. Do not insert a K-Cup® pod. The three brew buttons will blink.
Press the small cup button to start a cleansing brew. Pour the hot water into the sink.
The one-time setup process is now complete and you are ready to brew!

5. Place Mug

Place a mug on the drip tray plate. If using a travel mug, remove the drip tray and place the mug on the drip tray base.
NOTE: Between brew cycles, the brewer may take about a minute to reheat.

6. Lift & Insert

Lift the handle and place a K-Cup® pod in the K-Cup® pod holder. Lower the handle
completely to close the lid.
Do not remove the foil lid on the K-Cup® pod.

7. Brew & Enjoy

Select your brew size. The button will remain illuminated while brewing—about 1 minute. Brewing ends with a burst of air.
Lift the handle and dispose of the used K-Cup® pod. The brewer will be ready to brew another cup in about a minute.
NOTE: After 60 seconds, the brew buttons will be disabled. To re-activate, lift and lower the handle completely.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process.

Brewer Features

Smart Start heats then brews in one simple process. No need to wait for the brewer to heat before selecting brew size. Power on your brewer, place mug, insert a K-Cup® pod, and lower the handle. Then, select your brew size. The brewer will heat, then automatically begin brewing.
Auto Off automatically turns your brewer off 2 hours after the last brew for energy savings.

Caring for your Brewer

Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.

Brewer Exterior

Keep your Keurig® brewer looking its best by cleaning the exterior from time to time. Just clean with a damp, soapy, lint-free, non-abrasive cloth.
Never immerse the brewer in water or other liquids.

Drip Tray

The drip tray can accumulate up to 8 ounces of overflow and should be emptied and cleaned occasionally. To remove, slide it toward you, keeping it level to avoid spilling. Clean in dishwasher (top rack only) or rinse and clean with a damp, soapy, lintfree, non-abrasive cloth.

Water Reservoir & Reservoir Lid

The water reservoir lid and water reservoir should be periodically cleaned with a damp, soapy, nonabrasive cloth and rinsed thoroughly.

The water reservoir lid and water reservoir should not be put into the dishwasher. Do not dry the inside of the water reservoir with a cloth as lint may remain.

To clean the filter screen at the base of your water reservoir, empty the water reservoir and follow one or all of the following procedures:

Rinse the filter screen with the strong force of water from your faucet.
If you have a sprayer, aim the water spray at the filter screen.
Fill the water reservoir with approximately two inches of clean water and agitate (shake) the water reservoir. Empty the water reservoir, fill with clean water, and return it to the brewer. If needed, repeat above procedures.
CAUTION: Please rinse the water reservoir thoroughly after cleaning. This will ensure that no cleaners or cleaning solutions remain in this area as they may contaminate the water supply in the brewer.

K-Cup® Pod Holder Assembly

To remove the K-Cup® pod holder from the brewer, lift the handle and grasp the top of the K-Cup® pod holder with one hand while pushing up on the bottom of the K-Cup® pod holder
from underneath with the other until it releases. After cleaning, align the K-Cup® pod holder with the opening using the two front ribs as a guide and snap into place from the top.

Funnel

The funnel can be removed from the K-Cup® pod holder by pulling on it until it pops off. To replace it, just snap it back onto the K-Cup® pod holder.

Exit Needle

Remove the pod holder assembly and detach the funnel. Locate the exit needle on the inside bottom of the K-Cup® pod holder. Insert a straightened paper clip into the exit needle to loosen the clog and push it out.

Entrance Needle

Lift the brewer handle and locate the entrance needle on the underside of the lid. To clean both holes in the needle, hold the brewer handle in the upward position and with your other hand, carefully insert a straightened paper clip into both holes. Gently move it around to loosen any coffee grounds. Lower the handle completely and run two water-only brew cycles. Do not insert a K-Cup® pod.

TIP: Refer to www.Keurig.com/support for video instructions on cleaning the entrance/exit needles.

Descaling your Brewer

You should descale your brewer every 3-6 months. Properly follow the descaling procedure.

Depending on the mineral content of your water, calcium deposits or scale may build up in your brewer. Scale is nontoxic but if left unattended can hinder brewer performance. Regularly descaling your brewer every 3-6 months helps maintain the heating element, and other internal parts that come in contact with water. Calcium deposits may build up faster, making it necessary to descale more often.

Descaling Procedure

Before you begin, you will need a large ceramic mug, fresh water, Keurig® Descaling Solution, and access to a sink. Do not use a paper cup. Ensure that there is no beverage pod in the K-Cup® pod holder. Please allow approximately 45 minutes for the descaling procedure.

STEP 1: Descaling Solution Rinse

Press the power button to power the brewer off.

Pour the entire bottle of Keurig® Descaling Solution into an emptied water reservoir. Then fill the empty bottle with water and pour into the water reservoir. Press the power button to turn the brewer back on.

Place a large mug on the drip tray and run a rinsing brew by lifting and lowering the handle and selecting the largest brew size.

STEP 2: Descaling Rinse & Repeat

Repeat the rinsing brew process until the add water light is illuminated. Do not use a K-Cup® pod. Let brewer stand for at least 30 minutes while still on.

After 30 minutes, discard any residual solution from the water reservoir and rinse thoroughly.

STEP 3: Fresh Water Rinse

Fill the water reservoir with fresh water to and not beyond the MAX line.

Place a large mug on the drip tray plate and run a rinsing brew using the largest brew size. Do not use a K-Cup® pod. Pour the contents of the mug into the sink.

Repeat brew process until you have completed at least 12 rinsing brews using the largest brew size. You may need to refill the water reservoir at least one time during this process.

NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added. If this occurs, you may see only a small or no output dispensed, followed by the sound of air blowing out. If this occurs:

Turn off and unplug the brewer.
If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse the water reservoir thoroughly and refill with water.
Plug the brewer back in, power on, and repeat the Step 3 Fresh Water Rinse cycle. The brewer should begin to function normally as the solution is rinsed out and the scale is removed. If problem persists, allow brewer to sit unplugged for at least 30 minutes before continuing with the rinse.

Troubleshooting

Grounds in Your Coffee

Grounds may have gathered in the exit or entrance needle and can be cleaned using a straightened paper clip or similar tool.

Clean the exit needle of the K-Cup® pod holder. Refer to the exit needle care instructions.
Clean the brewer entrance needle. Refer to the entrance needle care instructions.

Brewer Will Not Brew

After placing the K-Cup® pod in the K-Cup® pod holder, make sure that the handle is pushed down securely and the brew buttons are flashing.
If the add water light is illuminated, add water to water reservoir. Fill to and not beyond the MAX line. Make sure the water reservoir is seated properly in its base. If the add water light continues to be illuminated even after refilling, contact Customer Service.
If the small cup, small mug, and large mug lights are all on simultaneously, lift handle and remove K-Cup® pod (if present in the brewer). Close handle and place a large mug on the
drip tray. Press the power button once. The brewer may dispense hot water.
If the small cup, small mug and large mug lights all blink simultaneously, contact Customer Service.

Brewing a Partial Cup

The exit needle may be clogged. Refer to the exit needle care instructions.
The water reservoir may have been removed during brewing. Replace the water reservoir and perform a rinsing brew without a K-Cup® pod.
The brewer may need to be descaled. If you have repeated the descale procedure on your brewer two times and it is still only brewing a partial cup, contact Customer Service.

Brewer Does Not Have Power or Shuts Off

Make sure that the power button has been turned on.
Plug brewer into its own grounded outlet. If the electric circuit is overloaded with other appliances, your brewer may not function properly. The brewer should be operated on its
own circuit, separate from other appliances.
For energy savings, the brewer automatically turns off 2 hours after the last brew. Press the power button and the green power light will illuminate.
If the brewer still doesn’t have power, contact Customer Service.

Helpful Hints

Water quality varies greatly. If you notice an undesirable taste in your beverage (such as chlorine or mineral tastes), we recommend using bottled or filtered water. Do not use distilled water.

Service

Beyond these recommended cleaning and maintenance procedures, this brewer is not user serviceable. For service, please refer to the Warranty section of this guide.

Storage

Empty the water reservoir before storing or transporting and take care to ensure that you store your brewer in a safe and frost free environment. Please be sure to store your brewer in its upright position to avoid water leakage from the inner tank. If you store the brewer in a cold environment, you run the risk of water freezing inside the brewer and causing damage. When you prepare to use it after storage, we recommend rinsing the water reservoir with fresh water and running three rinsing brews without a K-Cup® pod.

If you plan to move your brewer to a different location, turn the brewer off, unplug it, and empty the water reservoir. If your brewer has been in an environment below freezing, please be sure to let it warm to room temperature for at least 2 hours before using.

Click or Call!

Have Questions?

We’re here to help. Visit www.Keurig.com/support for step-by-step videos on cleaning, descaling, and more.

Still Need Help?

Give us a call at 1-866-901-BREW (2739)

Warranty

LIMITED ONE YEAR WARRANTY

Keurig Green Mountain, Inc. (Keurig) warrants that your brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you register your brewer on www.Keurig.com/new so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase. If a replacement brewer is necessary to service this warranty, the replacement brewer may be new or reconditioned. If a replacement brewer is sent, a new limited one year warranty will be applied to the replacement brewer.

This warranty only applies to brewers operated in the United States and Canada. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and, in the case of Canada, from province to province.

Only the use of Keurig® K-Cup® brand pods and accessories will guarantee the proper functioning and lifetime of your Keurig® brewer. Any damage to or malfunction of your brewer resulting from the use of non-Keurig® pods and accessories may not be covered by this warranty or may result in a service fee if the damage or malfunction is determined to be caused by such use.

WHAT IS NOT COVERED BY THE LIMITED WARRANTY?

Some states or provinces do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you depending on the state or province of purchase.

Nor does this warranty cover damages caused by use of non-Keurig® pods or accessories, services performed by anyone other than Keurig or its authorized service providers, use of parts other than genuine Keurig® parts, or external causes such as abuse, misuse, inappropriate power supply, or acts of God.

OTHER LIMITATIONS

Some states or provinces do not allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you depending on the state or the province of purchase.

HOW DO YOU OBTAIN WARRANTY SERVICE?

Keurig® brewers are high-quality appliances and, with proper care, are intended to provide years of satisfying performance. However, should the need arise for warranty servicing, simply call Keurig Customer Service at our toll free phone number 1.866.901.BREW (2739). Please do not return your brewer for servicing without first speaking to Keurig Customer Service to obtain a Return Materials Authorization (RMA) number. Keurig® brewers returned without a RMA number will be returned to the sender without servicing.

K-COMPACT™ BREWER

A. Water Reservoir Lid
B. MAX Fill Line
C. Water Reservoir
D. Water Reservoir Lock Tab Slots
E. Power Cord
F. Handle
G. Lid
H. K-Cup® Pod Holder (H and I are the K-Cup® Pod Holder Assembly)
I. Funnel
J. K-Cup® Pod Assembly Housing
K. Drip Tray Plate
L. Drip Tray
M. Drip Tray Base

For replacement parts, please visit www.Keurig.com

Fully experience the benefits that come with your new Keurig® brewer at: KEURIG.COM/NEW

FAQ’S

What is the difference between Keurig compact and Keurig Mini?

Keurig K Compact vs K Mini
The main difference between the two is the water tank and cup options. While K Compact has a 36-ounce reservoir, the K Mini has a single cup water tank. This means that you need to add fresh water each time you want to make coffee.

How do you use a Keurig K compact single serve K-cup pod coffee maker?

Simple button controls: just insert a Pod, select your desired cup brew size, and brew a great-tasting cup in under a minute. Dispense hot water: open and close the brewer handle (without a Pod) and select your cup size for Hot water on demand.

How do you drain all the water out of a Keurig K Compact?

Brewer must be powered off but plugged in.
Place a mug on the Drip Tray to catch the water to be drained.
Check if there is water left in the Cold Water Reservoir. If so, lift the brewer handle to drain the water in the Cold Water Reservoir into the Hot Water Tank.

How do I clean my Keurig K compact with vinegar?

Fill the water reservoir halfway with vinegar. Add water: Fill the reservoir the rest of the way with water. Run the machine: Start the brew cycle without inserting a K-cup. Repeat until reservoir is empty, discarding the mug contents after each brewing cycle.

Does Keurig K Compact have auto shut off?

Although this is a very basic brewing machine, I always appreciate an auto shut-off function. The K Compact turns off automatically after two hours of inactivity.

Can I use tap water in my Keurig?

It’s acceptable to use tap water in a Keurig. As long as it’s clean, water from anywhere should work. However, most would recommend using filtered or bottled water. Tap water holds more mineral content than the alternatives

How do you use a Keurig K compact single serve K-cup pod coffee maker?

What are the buttons on Keurig?

To select a specific cup size on most brewers, you push the associated button. It may be a digital button on the display screen or a physical one on the brewer top. The first model we tried many years ago had one lonely button.

What does the over ice button do on a Keurig?

The iced button is designed, instead, to make the coffee hot so it has the full flavor of brewed coffee, but with the correct strength and flavor so that when it cools over the ice, it ends up tasting like full-flavored coffee that happens to be iced.

Can you use a Keurig to boil water?

Recap. A Keurig does not boil water. The highest temperature to which a Keurig can heat water is 192° F which is perfect for brewing your coffee. You can get just hot water from Keurig for your instant meals.

Can you put tea bags in a Keurig?

You can brew standard tea bags. In addition to brewing K-Cup® coffees and teas, your Keurig® machine can be used as an instant hot water dispenser. Just put your teabag in a mug and place it on the drip tray. Run a water-only brew cycle and viola…a freshly brewed tea bag.

Why is my Keurig K compact not brewing?

Maybe try descaling. The machine. Okay give that a give that a try or you can even clean the needles. Right so just try cleaning up the needles and the lines.

Keurig K-Compact Single Serve Coffee Brewer
www://keurig.com/

Keurig Hot Classic Coffee Maker User Manual

ItsManual — Sat, 19 Nov 2022 11:01:31 +0000

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed, including the following:

Read all instructions before using.
Do not touch hot surfaces. Use handles and knobs when available.
This appliance must be properly installed and located in accordance with these instructions before it is used.
The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock, or injury to persons.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Do not use the outdoors.
To protect against fire, electric shock, and injury do not immerse cords, plugs, or the appliance in water or any other liquid.
Do not fill the Water Reservoir above the MAX FILL line.
Use only water in this appliance! Do not put any other liquids or foods in the Water Reservoir except as instructed in the cleaning instructions in this guide.
Turn off and unplug the brewer before cleaning or maintenance. Allow cooling before putting on or taking off parts and before cleaning the appliance.
For best operation, plug the appliance into its own electrical outlet on a dedicated circuit to prevent flickering of lights, blowing of fuses, or tripping a circuit breaker.
Do not operate any appliance with a damaged Power Cord or plug or after the appliance malfunctions or is damaged in any manner. Contact Keurig Customer Service to report any malfunction of or damage to the brewer.
Do not let the Power Cord hang over the edge of the table or counter, or touch hot surfaces.
To disconnect, press the Power Button on the brewer to “OFF” status and then remove the plug from the wall outlet.
Close supervision is necessary when any appliance is used by or near children.
Do not lift the brewer handle while brewing is in progress.
Always keep the Water Reservoir Lid on the Water Reservoir unless you are refilling it.
This appliance is equipped with a Power Cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.
If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall utlet.
Do not, under any circumstances, cut or remove the third (ground) prong from the Power Cord or use an adapter.
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use the appliance for other than its intended use.

SAVE THESE INSTRUCTIONS.

WARNING TO USERS AND PARENTS:

1. DO NOT permit children to use the brewer unless there is adult supervision. Brewer dispenses very hot water.
2. SPECIAL NOTICE FOR HOT COCOA/OTHER USERS: IMMEDIATELY AFTER USING A HOT COCOA/OTHER POD, RUN A HOT WATER BREW CYCLE without a pod to avoid the possibility of clogging the exit needle. DO NOT assume the next user will do this.

CAUTION: There are three sharp needles that puncture pods, two above the Pod Holder and the other in the bottom of the Pod Holder. To avoid risk of injury, do not put your fingers in the Pod Holder Assembly.

CAUTION: There is extremely hot water in the Pod Holder during the brewing process. To avoid the risk of injury, do not lift the Handle or open the Pod Holder Assembly during the brewing process.

CAUTION: Please always keep the brewer in its upright position to avoid potential injury and/or damage to your brewer.

CAUTION: Very hot liquid. Adult supervision required.

SHORT CORD INSTRUCTIONS:
A short power-supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance; (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally; and (3) the extension cord must include a 3-prong grounding plug.

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

WARNING
THIS PRODUCT CONTAINS CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, OR OTHER REPRODUCTIVE HARM.

KEEP ALL PLASTIC BAGS AWAY FROM CHILDREN

FEATURES

CONTROLS & INDICATORS

UNPACKING INSTRUCTIONS

Place brewer box on a large steady surface (such as a table or countertop) or on the floor. Open the box.
Remove enclosed literature.
Turn the box on its side with front of box face down.
Reach into the box and grasp the plastic bag that contains the brewer.
Carefully pull the plastic bag (and packaging materials) toward you and out of the box. The brewer will still be encased in the polyfoam and be on its side.
Remove the top polyfoam packaging material.
Carefully lift the brewer off of the bottom polyfoam and place it upright on a flat, steady surface.
Lift plastic bag off of brewer.
Record the serial number for this brewer on page 5 of this guide. The serial number can be found on the bottom of the brewer box or on the brewer behind the Drip Tray (when removed).
Place the brewer upright on a flat, steady surface. Remove the tape holding Water Reservoir in place.

We recommend you save all packing materials in case future shipping of the product is necessary.
IMPORTANT: You cannot use your Keurig® brewer until it has been set up for its first use.
NOTE: If brewer has been exposed to temperatures below freezing, allow brewer at least two hours to reach room temperature before brewing. A frozen or extremely cold brewer will not operate.

WARNING:
Keep all plastic bags away from children.

SETUP

1. Unwrap cord and plug the brewer into a grounded outlet. Remove all pieces of packing tape.

2. Place a large mug (10 oz. minimum) on the Drip Tray Plate.

3. Remove the Water Reservoir from the brewer by first removing Lid from Reservoir, then lifting the Reservoir straight up and away from brewer (may be tight). Rinse with fresh water. Fill Water Reservoir with bottled or filtered water so that the water is to and not beyond the MAX FILL line.

4. Place Water Reservoir base into the left side of the brewer and be sure the Water Reservoir Lock Tabs engage with the brewer. Replace Lid on Water Reservoir.

5. Press Power Button found on upper right panel of the brewer. The green Power Light will illuminate.

NOTE: A K-Cup® pod should not be used for this sequence. NOTE: If the Water Reservoir is empty or not in place on the brewer, the blue Add Water Light will illuminate. The Small Mug Button will not be activated until water is added to the Water Reservoir.

6. The brewer will automatically fill with water and then the water will be heated. This will take about 4 minutes. During the heating period, the red Heating Light will illuminate. Once the water is heated, the red Heating Light will turn off and the Small Cup, Small Mug, and Large Mug Buttons will illuminate.

NOTE: Do not lift Handle during this heating period.
NOTE: You may see small amounts of water coming from the Vent and dripping into the Water Reservoir during this and subsequent heating – this is normal.

7. Lift and lower the Handle. Press the Small Mug Button to start a cleansing brew. Pour the hot water into the sink.

8. The brewer may take 15 seconds to reheat water between brews during which time the red Heating Light may be illuminated. When the water has heated, the red Heating Light will turn off. The one-time setup process is now complete and you are ready to brew!

BREW YOUR FIRST CUP

1. The green Power Light will illuminate to indicate the brewer is powered on. Place a cup or mug on the Drip Tray Plate.

2. Lift the Handle and the K-Cup® pod Holder will open toward you. Select a K-Cup® pod.
NOTE: Do not remove the foil lid or puncture the K-Cup® pod.

3. Place a K-Cup® pod in the K-Cup® Pod Holder. Lower the Handle completely to close the Lid.
CAUTION: There are two sharp needles that puncture the K-Cup® pod, one above the K-Cup® Pod Holder and the other in the bottom of the K-Cup® Pod Holder. To avoid risk of injury, do not put your fingers in the K-Cup® Pod Holder.

4. Select your brew size: The Small Cup choice will yield a 5.25 oz. serving, the Small Mug will yield a 7.25 oz. serving and the Large Mug will yield a 9.25 oz. serving. The blue Brew Button you choose will remain illuminated while brewing.

NOTE: If you do not push a Brew Button in 60 seconds, the Brew Buttons will be disabled to prevent accidental activation. Re-activate the Brew Buttons by lifting and lowering the Handle completely.
CAUTION: There is extremely hot water in the K-Cup® Pod Holder during the brew process. To avoid risk of injury, do not lift the Handle or open the K- up® Pod Assembly Housing during the brew process.

5. There may be a short pause before the brewing process begins. The entire brew process lasts for approximately 1 minute and ends with a burst of air to remove all liquid from the K-Cup® pod Lift the Handle and dispose of the used K-Cup® pod.
CAUTION: K-Cup® pod will be hot.

6. Enjoy your first cup of gourmet coffee, tea, or hot cocoa from your Keurig® brewer!

7. The red Heating Light may be illuminated as the water is heated for the next brew cycle. The brewer will be ready for use in approximately 15 seconds.
NOTE: During this period, your brewer will prepare for the next brew. The pump may make a vibrating sound. This is normal.

CONTROLS & INDICATORS (LED CONTROL CENTER)

PROGRAMMING AUTO-OFF TIMER FEATURE
To set the brewer to turn off two hours after the last brew follows the steps below.

1. Press the Power Button to turn on the brewer.

2. Press the black Auto-Off Button to turn on the Auto Off Timer feature. The green Auto Off Light will illuminate When the Auto-Off Timer is enabled, your brewer will automatically turn off two hours after your last brew.

3. To disable the Auto-Off Timer, simply press the black Auto-Off Button again and the green Auto Off Light will turn off.

CARING FOR YOUR BREWER

CLEANING EXTERNAL PARTS

CLEANING THE BREWER EXTERIOR
Keep your Keurig® Classic Series brewer looking its best by cleaning the exterior from time to time. Just clean with a damp, soapy, lint-free, non-abrasive cloth. Never immerse the brewer in water or other liquids.

CLEANING THE DRIP TRAY
The Drip Tray can accumulate up to 8 ounces of overflow. The Drip Tray and the Drip Tray Plate should occasionally be rinsed clean. To remove the Drip Tray, simply slide it toward you, keeping it level at all times to avoid spilling. Clean with a damp, soapy, lint-free, non-abrasive cloth.

CLEANING THE K-CUP® POD HOLDER ASSEMBLY

Cleaning the Parts The K-Cup® Pod Holder Assembly can be placed onto the top shelf of a dishwasher. NOTE: Use low temperature cycles in the dishwasher. To remove from the brewer, lift the Handle and grasp the top of the K-Cup® Pod Holder with one hand while pushing up on the bottom of the K-Cup® Pod Holder from underneath with the other until it releases. After cleaning, align the K-Cup® Pod Holder with the opening using the two front ribs as a guide and snap into place from the top.

Cleaning the Funnel The Funnel can be removed from the K-Cup® Pod Holder by pulling on it until it pops off. The Funnel is dishwasher safe. To replace it, just snap it back onto the K-Cup® Pod Holder Assembly.

Cleaning the Exit Needle The Exit Needle is located on the inside bottom of the K-Cup® Pod Holder Assembly. Should a clog arise due to coffee grinds, it can be cleaned using a paper clip or similar tool. Remove K-Cup® Pod Holder Assembly and detach Funnel. Insert the paper clip into the Exit Needle to loosen the clog and push it out. The K-Cup® Pod Holder is dishwasher safe.

CAUTION: There are sharp needles that puncture the K-Cup® pod above the K-Cup® Pod Holder and in the bottom of the K-Cup® Pod Holder. To avoid risk of injury, do not put your fingers in the K-Cup® Pod Assembly Housing.

CLEANING THE WATER RESERVOIR & WATER RESERVOIR LID
The Water Reservoir Lid and Water Reservoir should be periodically inspected and cleaned.

The Water Reservoir Lid or Water Reservoir should not be put into the dishwasher. They should be cleaned with a damp, soapy, non-abrasive cloth and rinsed thoroughly. Do not dry the inside of the Water Reservoir with a cloth as lint may remain.

To clean the filter screen at the base of your Water Reservoir, empty the Water Reservoir and follow one or all of the following procedures.

NOTE: If you are using a water filter inside the Water Reservoir, remove it before cleaning.
1. Rinse the filter screen with the strong force of water from your faucet.
2. If you have a sprayer, aim the water spray at the filter screen.
3. Fill the Water Reservoir with approximately two inches of clean water and agitate (shake) the Water Reservoir.

Empty the Water Reservoir then fill it with clean water and return it to the brewer. If needed, repeat the above procedures.

CAUTION: Please rinse the Water Reservoir thoroughly after cleaning. This will ensure that no cleaners or cleaning solutions remain in this area as they may contaminate the water supply in the brewer.

CARING FOR YOUR BREWER

DESCALING YOUR BREWER
Depending on the mineral content of your water, calcium deposits or scale may build up in your brewer. Scale is nontoxic but if left unattended can hinder brewer performance. Regularly descaling your brewer every 3-6 months helps maintain the heating element, and other internal parts that come in contact with water. Calcium deposits may build up faster, making it necessary to descale more often.

You should promptly scale if the red Descale Light is illuminated. However, even if the red Descale Light is not illuminated you should continue to descale your brewer every 3-6 months. Properly follow the descaling procedure.

DESCALING PROCEDURE
Before you begin, you will need a large ceramic mug, freshwater, descale solution, and access to a sink. Do not use a paper cup.

Empty the water from the Water Reservoir. If there is a Keurig® Water Filter, remove and set it aside. Disable “Auto Off” features, if necessary (refer to page 14).

STEP 1: FIRST DESCALING SOLUTION RINSE

Press the Power Button to power the brewer off.
Pour the entire bottle of Keurig® Descaling Solution into the Water Reservoir. Then fill the empty bottle with water and pour into the Water Reservoir. Press the Power Button to turn the brewer back on.
Place a large mug on the Drip Tray Plate and run a cleansing brew using the largest brew size. Do not use a K-Cup® pod. Pour the contents of the mug into the sink.

STEP 2: SECOND DESCALING SOLUTION RINSE

Repeat the brew process without a K-Cup® pod, until ADD WATER is indicated. Let brewer stand for at least 30 minutes while still on.
After 30 minutes, discard any residual solution and rinse the Water Reservoir thoroughly.

STEP 3: FRESHWATER RINSE

Ensure the Water Reservoir is filled with fresh water to and not beyond the MAX FILL line.
Place a large mug on the Drip Tray Plate and run a cleansing brew using the largest brew size. Do not use a K-Cup® pod. Pour the contents of the mug into the sink.
Repeat brew process until you have completed at least 12 brews using the largest brew size. You may need to refill the Water Reservoir at least one time during this process.

NOTE: If the red Descale Light is still illuminated after completing the procedure, repeat the descaling procedure above.

NOTE: The cleaning action of Keurig™ Descaling Solution may result in a foam dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added. If this occurs, you may see only a small or no output dispensed followed by the sound of air blowing out. If this occurs:

Turn off and unplug the brewer.
If there is Keurig® Descaling Solution in the Water Reservoir, discard the contents, rinse the Water Reservoir thoroughly and refill with water.
Plug the brewer back in, power on, and repeat the Step 3 Fresh Water Rinse cycle. The brewer should begin to function normally as the solution is rinsed out and the scale is removed. If the problem persists, allow brewer to sit unplugged for at least 30 minutes before continuing with the rinse.

Visit us online for more information at www.Keurig.com/descaling.

CARING FOR YOUR BREWER

SERVICE
Beyond these recommended cleaning and maintenance procedures, this brewer is not user-serviceable. For service, please refer to the Warranty section of this guide.

STORAGE
Empty the Water Reservoir before storing and take care to ensure that you store your brewer in a safe and frost-free environment. Please be sure to store your brewer in its upright position to avoid water leakage from the inner tank. If you store the brewer in a cold environment, you run the risk of the water freezing inside the brewer and causing damage. When you prepare to use it after storage, we recommend rinsing the Water Reservoir with fresh water and running three cleansing brews without a K-Cup® pod.

If you plan to move your brewer to a different location, turn the brewer off, unplug it and empty the Water Reservoir. If your brewer has been in an environment below freezing, please be sure to let it warm to room temperature for at least 2 hours before using.

INSTRUCTIONAL VIDEOS AVAILABLE ONLINE
You can watch step-by-step videos on cleaning, descaling, and more.
Visit www.Keurig.com/customer-service

HAVE QUESTIONS? WE’RE HERE TO HELP
Keurig is committed to your satisfaction. If you have questions, just give us a call to have them answered quickly without leaving the comfort of your home. 1.866.901.BREW (2739)

Keurig K-Select Coffee Maker User Manual

ItsManual — Mon, 21 Nov 2022 10:50:22 +0000

Before You Brew

Plug & Place

Remove packing tape from brewer and plug into a grounded outlet.
Place a large mug (12oz. minimum) on the drip tray plate.

Rinse & Fill

Remove the water reservoir lid, then lift the reservoir straight up to remove it.
If you have a Keurig® Water Filter, install it now. Refer to your Water Filter Starter Kit for instructions.
Rinse the reservoir with fresh water and fill it to the MAX fill line.
Replace water reservoir, making sure the lock tab engages with the brewer. Replace lid.
NOTE: Do not use distilled water.

” alt=”Rinse & Fill” width=”200″ height=”297″ data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/01/Rinse-Fill.jpg” />

Power On

Press power button — the green power light and Auto Off light will illuminate.
The brewer will automatically begin heating the water. This will take about 3 minutes. Once the heating sound stops, the brewer is ready.

Lift & Lower

Lift and lower the handle. Do not insert a K-Cup® pod. The four brew buttons and the Strong button will blink.
Press the small cup button to start a cleansing brew. Pour the hot water into the sink.
The one-time setup process is now complete and you are ready to brew!

Brew Your First Cup

Place Mug

Place a mug on the drip tray plate. If using a travel mug, remove the drip tray and place the mug on the drip tray base.
NOTE: Between brew cycles, the brewer may take about a minute to reheat.

Lift & Insert

Lift the handle and place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid.
Do not remove the foil lid on the K-Cup® pod.

Brew & Enjoy

Select your brew size – for bolder coffee, press the Strong button before selecting your brew size. The brew size and Strong button, if selected, will remain illuminated while brewing – about 1 minute.
The brewer will be ready to brew another cup in about a minute.
NOTE: After 60 seconds, the brew buttons will be disabled. To re-activate, lift and lower the handle completely.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process.

Brewer Features
Strong Brew kicks up your coffee’s strength and intensity. For bolder coffee, press the Strong button before selecting your brew size.
Smart Start heats then brew in one simple process. No need to wait for the brewer to heat before selecting the brew size. Power on your brewer, place mug, insert a K-Cup® pod and lower the handle. Then, select your brew size. The brewer will heat, then automatically begin brewing.

Auto-Off automatically turns your brewer off 2 hours after the last brew for energy savings.

To disable the Auto-Off feature:
1. Power the brewer off while it is plugged in.
2. Press and hold the Strong and the 10oz. Large Mug buttons for 3 seconds – the green Auto-Off light will turn off.
3. Power the brewer on – the green Auto-Off light will no longer be illuminated.

To enable the Auto-Off feature, repeat steps 1-3. The green Auto-Off light will illuminate.
High Altitude Brewing: To ensure your brewer works properly at higher altitudes (5,000 feet) please follow these brewing instructions and enable the High
Altitude Brewing Mode on your brewer.
Brewing Instructions – While holding the brewer handle up, push down slowly on the K-Cup® pod in the pod holder until the bottom of the K-Cup® pod is punctured by the exit needle.

To enable High Altitude Brewing Mode:
1. Power the brewer off while it is plugged in.
2. Press and hold the Strong and 8oz. Small Mug buttons for 3 seconds- both lights will blink 3 times to confirm that the High Altitude Brewing Mode has been enabled.
To disable High Altitude Brewing Mode:
1. Power the brewer off while it is plugged in.
2. Press and hold the Strong and 8oz. Small Mug buttons until the lights are no longer illuminated.

Caring for your Brewer

Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.

Brewer Exterior
Keep your Keurig® brewer looking its best by cleaning the exterior from time to time. Just clean with a damp, soapy, lint-free, non-abrasive cloth. Never immerse the brewer in water or other liquids.

” alt=”Brewer Exterior” width=”153″ height=”242″ data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/01/Brewer-Exterior.jpg” />

Drip Tray
The drip tray can hold up to 8 ounces of overflow and should be emptied and cleaned occasionally. To remove, slide it toward you, keeping it level to avoid spilling. Clean in a dishwasher (top rack only) or rinse and clean with a damp, soapy, lint-free, non-abrasive cloth.

Water Reservoir & Reservoir Lid
The water reservoir lid and water reservoir should be cleaned periodically. Clean in a dishwasher (top rack only) or hand wash. To hand-wash, use a damp, soapy, non-abrasive cloth. Rinse the reservoir thoroughly after cleaning. This will ensure that no cleaning solutions remain in the area as they may contaminate the water supply. After rinsing, fill the reservoir with clean water and return it to the brewer. Do not dry the inside of the water reservoir with a cloth as lint may remain. If needed, repeat the above procedures. NOTE: If you are using a water filter inside the water reservoir, remove it before cleaning.

K-Cup® Pod Holder

To remove the K-Cup® pod holder from the brewer, lift the handle and grasp the top of the K-Cup® pod holder with one hand while pushing up on the bottom of the K-Cup® pod holder from underneath with the other until it releases. After cleaning, align the K-Cup® pod holder with the opening using the two front ribs as a guide and snap into place from the top.

CAUTION: There are sharp needles that puncture the K-Cup® pod above the K-Cup® pod holder and in the bottom of the K-Cup® pod holder. To avoid the risk of injury, do not put your fingers in the K-Cup® pod holder.

” alt=”K-Cup® Pod Holder” width=”192″ height=”273″ data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/01/K-Cup%C2%AE-Pod-Holder.jpg” />

Funnel
The funnel can be removed from the K-Cup® pod holder by pulling on it until it pops off. To replace it, just snap it back onto the K-Cup® pod holder.

Exit Needle
Remove the pod holder assembly and detach the funnel. Locate the exit needle on the inside bottom of the K-Cup® pod holder. Insert a straightened paper clip into the exit needle to loosen the clog and push it out.

Entrance Needle
Lift the brewer handle and locate the entrance needle on the underside of the lid. To clean both holes in the needle, hold the brewer handle in the upward position, and with your other hand, carefully insert a straightened paper clip into both holes. Gently move it around to loosen any coffee grounds. Lower the handle completely and run two water-only brew cycles. Do not insert a K-Cup® pod. TIP: Refer to support.Keurig.com for video instructions on cleaning the entrance/exit needles.

Descaling your Brewer

You should descale your brewer every 3-6 months. Properly follow the descaling procedure.

Depending on the mineral content of your water, calcium deposits or scale may build up in your brewer. The scale is non-toxic but if left unattended can hinder brewer performance. Regularly descaling your brewer every 3-6 months helps maintain the heating element and other internal parts that come in contact with water. Calcium deposits may build up faster, making it necessary to descale more often.

Descaling Procedure
Before you begin, you will need a large ceramic mug, freshwater, Keurig® Descaling Solution, and access to a sink. Do not use a paper cup. Ensure that there is no beverage pod in the K-Cup® pod holder. Please allow approximately 45 minutes for the descaling procedure.

Empty the water from the water reservoir. If using a Keurig® Water Filter, remove and set aside.

STEP 1: Descaling Solution Rinse
Press the power button to power the brewer off.
Pour the entire bottle of Keurig® Descaling Solution into an emptied water reservoir. Then fill the empty bottle with water and pour into the water reservoir. Press the power button to turn the brewer back on.
Place a large mug on the drip tray and run a rinsing brew by lifting and lowering the handle and selecting the largest brew size.

STEP 2: Descaling Rinse & Repeat
Repeat the rinsing brew process until the add water light is illuminated. Do not use a K-Cup® pod. Let brewer stand for at least 30 minutes while still on.
After 30 minutes, discard any residual solution from the water reservoir and rinse thoroughly.

STEP 3: Fresh Water Rinse
Fill the water reservoir with fresh water to and not beyond the MAX fill line.

Place a large mug on the drip tray plate and run a rinsing brew using the largest brew size. Do not use a K-Cup® pod. Pour the contents of the mug into the sink.

Repeat the brew process until you have completed at least 12 rinsing brews using the largest brew size. You may need to refill the water reservoir at least one time during this process.

Turn off and unplug the brewer.
If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse the water reservoir thoroughly and refill with water.
Plug the brewer back in, power on, and repeat the Step 3 Fresh Water Rinse cycle. The brewer should begin to function normally as the solution is rinsed out and the scale is removed. If the problem persists, allow the brewer to sit unplugged for at least 30 minutes before continuing with the rinse.

Troubleshooting

Grounds in Your Coffee
Grounds may have gathered in the exit or entrance needles and can be cleaned using a straightened paper clip or similar tool.
• Clean the exit needle of the K-Cup® pod holder. Refer to the Exit Needle care instructions.
• Clean the brewer entrance needle. Refer to the Entrance Needle care instructions.

Brewer Will Not Brew

After placing the K-Cup® pod in the K-Cup® pod holder, make sure that the handle is pushed down securely and the brew buttons are flashing.
If the add water light is illuminated, add water to the water reservoir. Fill to and not beyond the MAX fill line. Make sure the water reservoir is seated properly in its base. If the add water light continues to be illuminated even after refilling, contact Customer Service.

Brewing a Partial Cup

The exit needle may be clogged. Refer to the Exit Needle care instructions.
The water reservoir may have been removed during brewing. Replace the water reservoir and perform a rinsing brew without a K-Cup® pod.
The brewer may need to be descaled. If you have repeated the descaling procedure on your brewer two times and it is still only brewing a partial cup, contact Customer Service.

Brewer Does Not Have Power or Shuts Off

Make sure that the power button has been turned on.
Plug brewer into its own grounded outlet. If the electric circuit is overloaded with other appliances, your brewer may not function properly. The brewer should be operated on its own circuit, separate from other appliances.
Auto Offsets the brewer to turn off 2 hours after the last brew for energy savings. Refer to Brewer Features for instructions on enabling and disabling this feature.
If the brewer still doesn’t have power, contact Customer Service.

Helpful Hints
Water quality varies greatly. If you notice an undesirable taste in your beverage (such as chlorine or mineral tastes), we recommend using bottled or filtered water. Do not use distilled water. You can also install a Keurig® Water Filter to help remove water impurities and improve beverage taste.

Service
Beyond these recommended cleaning and maintenance procedures, this brewer is not user-serviceable. For service, please refer to the Warranty section of this guide.

Storage
Empty the water reservoir before storing or transporting and take care to ensure that you store your brewer in a safe and frost-free environment. Please be sure to tear your brewer in its upright position to avoid water leakage from the inner tank. If you store the brewer in a cold environment, you run the risk of the water freezing inside the brewer and causing damage. When you prepare to use it after storage, we recommend rinsing the water reservoir with fresh water and running three rinsing brews without a K-Cup® pod.

Click or Call!

Have Questions?
We’re here to help. Visit support.Keurig.com for
step-by-step videos on cleaning, descaling, and more.

Still Need Help?
Give us a call at
1-866-901-BREW (2739)

Warranty

LIMITED ONE YEAR WARRANTY
Keurig Green Mountain, Inc. (Keurig) warrants that your brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you register your brewer on Keurig.com/new so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase. If a replacement brewer is necessary to service this warranty, the replacement brewer may be new or reconditioned. If a replacement brewer is sent, a new limited one year warranty will be applied to the replacement brewer.

WHAT IS NOT COVERED BY THE LIMITED WARRANTY?

THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND DOES NOT COVER INCIDENTAL COSTS AND EXPENSES RESULTING FROM ANY BREACH OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you depending on the state or province of purchase.

OTHER LIMITATIONS

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO YOUR K-SELECT™ BREWER, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states or provinces do not allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you depending on the state or the province of purchase.

HOW DO YOU OBTAIN WARRANTY SERVICE?

Keurig® brewers are high-quality appliances and, with proper care, are intended to provide years of satisfying performance. However, should the need arise for warranty servicing, simply call Keurig Customer Service at our toll-free phone number 1.866.901. BREW (2739). Please do not return your brewer for servicing without first speaking to Keurig Customer Service to obtain a Return Materials Authorization (RMA) number. Keurig® brewers returned without a RMA number will be returned to the sender without servicing.

K-SELECT™ BREWER

Fully experience the benefits that come with your new Keurig® brewer at

`KEURIG.COM/NEW`

DISCOVER
your favorite coffees with our customized taste quiz and get personalized recommendations

Keurig Single Serve Coffee Maker User Guide

ItsManual — Mon, 21 Nov 2022 10:51:45 +0000

KEURIG Single Serve Coffee Maker

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS

For household use only.
Do not use distilled water.
Scalding may occur if the handle is opened during the brewing process.
Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock, and injury to persons do not immerse appliance, cord, or plugs in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
The use of accessory attachments not authorized by the appliance manufacturer may result in fire, electric shock, or injury to persons.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Always attach plug to appliance first (if not permanently attached), then plug cord into the wall outlet. To disconnect, turn any control to ″off″ then remove plug from wall outlet.
Do not use appliance for other than intended use.
Use brewer in upright position only. Allow brewer to cool (90 min) prior to turning it in any position other than upright.
Do not immerse brewer in water.

For detailed brewer cleaning and maintenance instructions, videos, and the full Use & Care Guide visit Support.Keurig.com.

WARNING: Keep all plastic bags away from children.
CAUTION: Keurig® recommends using only Keurig® My K-Cup® Reusable Coffee Filter and Keurig® approved K-Cup® pods in this appliance. If the pod does not fit, do not force the pod into the appliance. The use of non-Keurig® pods or accessories may cause brewer malfunction or injury.
WARNING: Used K-Cup® pods should be removed from the pod holder, or in part with the daily cleaning routine.
WARNING: There is extremely hot water under pressure in the K-Cup® pod holder during the brew process. To avoid risk of injury do not lift the handle or otherwise open the handle during the brew process.
CAUTION: There are sharp needles that puncture the K-Cup pod; one above the K-Cup® pod holder, and the other in the bottom of the K-Cup pod holder. To avoid risk of injury, be aware of the needle locations.
POWER CORD INSTRUCTIONS:
a. A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
b. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
c. If a long detachable power-supply cord or extension cord is used:
I. The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
II. If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord.
III. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
CAUTION: HOT COCOA/OTHER NONCOFFEE PODS: Immediately after using a hot cocoa/other non-coffee pod, run a hot water brew cycle without a pod to avoid the possibility of clogging the exit needle. DO NOT assume the next user will do this.

SAVE THESE INSTRUCTIONS

Button Overview

Before You Brew

1. Plug & Place
Remove packing tape from brewer. Plug into a grounded outlet.
Place a large mug (10oz minimum) on the drip tray.
NOTE: If changing water tank position to the back, please complete before first brew (refer to instructions include

2. Rinse & Fill
Remove the water reservoir lid, then lift the reservoir straight up to remove it. If you have a Keurig® Water Filter, install it now. Refer to your Water Filter Starter Kit for instructions.
Rinse reservoir with fresh water and fill to the MAX FILL line.
Replace water reservoir, making sure the lock tabs engage with the brewer. Replace lid.
NOTE: Do not use distilled water.

3. Lift & Lower
Lift and lower the handle. Do not insert a K-Cup® pod. The brewer will power on automatically.

4. Cleansing Brew
The 4 cup sizes will blink. Press the 8oz button, then press the blinking BREW button to start a cleansing brew. Pour the hot water into the sink.
The one-time setup process is now complete and you are ready to brew!

Brew Your First Cup

5. Place Mug & Pod
Place a mug on the drip tray. If using a travel mug, remove the drip tray and place the mug on the drip tray base. Lift the handle and place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid.
Do not remove the foil lid on the K-Cup® pod.

6. Brew & Enjoy!
The 4 brew size buttons will blink. Select your brew size, then press the blinking BREW button. For a stronger coffee, press the STRONG button before brewing. The BREW button will remain illuminated while brewing. Brewing is complete when the buttons are no longer illuminated.
Lift the handle and dispose of the K-Cup® pod.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process.

For bolder coffee press the STRONG button, followed by the BREW button.
For iced beverages fill a large plastic tumbler with ice. Insert
any K-Cup® pod, then press the OVER ICE button, followed by BREW button.
NOTE: choose a tumbler large enough to accommodate both the ice and dispensed liquid to prevent overflow.
Multi-position Water Reservoir
Position along the left or back of the brewer to optimize counter space.

Brewer Features

Smart Start heats then brews in one simple process.
No need to wait for the brewer to heat before selecting brew size. Simply power on your brewer by lifting the handle, add a K-Cup® pod, select your brew size, then press the BREW button. The brewer will heat, then automatically begin brewing. Auto Off automatically turns your brewer off 5 minutes after the last brew for energy savings.

High Altitude To ensure your coffee maker works properly at higher altitudes (5,000 feet) please enable the High Altitude Brewing Mode on your coffee maker.

Begin with the brewer plugged in and powered off.
Press and hold the BREW button and 8oz button for 3 seconds. The 12oz button will illuminate to confirm that the High Altitude Brewing Mode has been enabled.
High Altitude Mode will remain enabled until steps 1-2 are repeated and the 12oz button turns off to confirm that the High Altitude Brewing mode is disabled.

Strong Brew for a bolder, more intense cup.
Over Ice brew your favorite beverages over ice.

ATTENTION!
This brewer is only compatible with newly designed Keurig Universal My K-Cup™

Do not attempt to use any other reusable filter or previous versions of Keurig My K-Cup; may cause damage to brewer.

Caring for your Brewer

For great-tasting coffee, keep your brewer running at peak performance by following the recommended maintenance schedule:

Frequency	Product	Benefit
Weekly	Keurig ® Rinse Pods	Rinse away residue and oils for a great tasting cup of coffee every time
Every 2 Months	Keurig ® Water Filters	Keep your water fresh and clean to enhance the taste of your coffee
Every 3 Months or when the Descale notification turns on	Keurig ® Descale Solution	Eliminate mineral build up to enhance the taste of your coffee and preserve the long-term health of your coffeemaker

To turn off Descale notification, follow the full descaling procedure as outlined in the Use & Care Guide

If the brewer has been in storage, or hasn’t been used in days, run a cleansing brew before brewing your beverage.
Periodically hand-wash the water reservoir and lid and drip tray with warm soapy water and rinse clean. Do not use any vinegar based cleaning products to clean the outside of your brewer.

CAUTION: Parts are not dishwasher safe.
NOTE: Do not dry the inside of the water reservoir with a cloth as lint may remain.

For detailed brewer cleaning and descale instructions, videos, and the full Use & Care Guide visit support.keurig.com.

Water Tank Repositioning

Flip Brewer Over
Remove the drip tray and the water tank and set them aside. On a flat surface, carefully turn the brewer over so the base is facing up.
You will see two parts: the water tank base (Part B) and the locking tab (Part A)
Remove Part A
Slide Part A out of the brewer. It should release freely with little resistance.
” sizes=”(max-width: 375px) 100vw, 375px” alt=”icon” width=”375″ height=”351″ data-ezsrcset=”https://manuals.plus/wp-content/uploads/2021/06/14-17-300×281.png 300w,https://manuals.plus/wp-content/uploads/2021/06/14-17.png 665w” data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/06/14-17-300×281.png” />
Lift, Pivot Part B
Next, reposition part B.
• Gently pull outward to disengage from the brewer.
• Rotate upward, as shown above. Part B will remain attached to the brewer.
• Part B should now pivot freely to the second position.
Remember to move the power cord, so it does not get caught.
” sizes=”(max-width: 386px) 100vw, 386px” alt=”icon” width=”386″ height=”354″ data-ezsrcset=”https://manuals.plus/wp-content/uploads/2021/06/15-16-300×275.png 300w,https://manuals.plus/wp-content/uploads/2021/06/15-16.png 665w” data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/06/15-16-300×275.png” />
Insert B, Replace A
Replace Part B in its new position. Rotate downward so that B is parallel to the base, then slide B back into position. Remember to replace the power cord.
Slide Part A back into the second position to lock B in place. Flip the brewer back upright.
You are now ready to use your Keurig® brewer!

Coffeehouse taste in your own home.

FIND YOUR PERFECT POD
With over 75 brands and hundreds of varieties, find your match at
Keurig.com/new

Have questions? We’re here to help. Visit keurig.com/new for troubleshooting videos, maintenance recommendations, and the full Use & Care Guide.
Still need help? Give us a call at 1-866-901-BREW (2739)

Keurig K-Mini Plus Coffee Maker Manual

ItsManual — Mon, 21 Nov 2022 10:53:35 +0000

Keurig K-Mini Plus Single Serve Coffee Maker

Get the most from your new Keurig® brewer.

Before You Brew

Plug & Power

Remove packing tape from brewer.
Pull plug and extend cord from cord storage located at the back of the brewer. Plug into a grounded outlet.
Press the power button. The power button will illuminate.
Fill & Place

Add 1 cup (8oz) of water into a mug. Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines. Lower the lid and place your mug on the drip tray.
NOTE: Do not use distilled water
Lift & Lower

Lift and lower the handle. Do not insert a K-Cup® pod. The brew indicator light will flash to indicate that the brewer is ready.
Cleansing Brew

Press the brew button. The brew indicator light will illuminate solid, then begin to pulse while the brewer is heating. After about 2 minutes, the brew indicator light will illuminate solid again and the water will begin to dispense. Pour the hot water into the sink.
The one-time setup process is now complete and you are ready to brew!
Fill & Place Mug

Add desired amount of water into a mug (6oz minimum, 12oz maximum). Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines. Lower the lid and place your mug on the drip tray.
Lift & Place Pod

Lift the handle. Place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid. The brew indicator light will flash to indicate that the brewer is ready. Do not remove the foil lid on the K-Cup® pod. High Altitude Brewing: While holding the brewer handle up, push down slowly on the K-Cup® pod in the pod holder until the bottom of the
K-Cup® pod is punctured by the exit needle.
Brew & Enjoy!

Brewer Features

Strong Brew increases your coffee strength and intensity. For bolder coffee
press the STRONG button. Pod Storage holds 9 K-Cup® pods and fits in your brewer to save counter space.
Removable Water Reservoir for easy cleaning and filling.
Auto Off: Automatically turns your brewer off 90 seconds after the last brew for energy savings.
Cord Storage: Makes transporting your brewer convenient and keeps
countertops tidy.
Travel Mug Friendly: Remove the drip tray to accomodate a travel mug.

Keurig Essentials Coffee Maker User Guide

ItsManual — Mon, 21 Nov 2022 11:09:28 +0000

KEURIG Essentials Coffee Maker

Before You Brew

Plug & Place
Remove packing tape from brewer and plug into an outlet.
Single Cup – Place a large mug (12oz minimum) on the drip tray.
Carafe – Rinse the carafe and place it on the heating plate.
Rinse & Fill
Remove the water reservoir lid, then lift the reservoir straight up to remove it.
If you have a Keurig® Water Filter, install it now. Refer to your Water Filter Starter Kit for instructions.
Fill the reservoir with fresh water to the MAX fill line.
Replace water reservoir, making sure the lock tabs engage with the brewer.
Cleansing Brew – Single Cup
Press the OZ button to power on the single cup side. Do not insert a K-Cup® pod. Press the 8 button to start the cleansing brew – the OZ button will pulse green while the brewer is heating. Once heated, the OZ button will turn solid green and the cleansing brew will begin. Pour the hot water into the sink.
NOTE: Between brew cycles, the brewer may take about a minute to reheat
Power On – Carafe
Fill the reservoir to the MAX fill line, and then press the CUPS button to power on the carafe side. Do not fill filter basket with coffee grounds. The CUPS button will illuminate green and the 3 brew size buttons will blink blue.
Cleansing Brew – Carafe
Press the 8 button to start a cleansing brew – the button will illuminate blue.

The CUPS button will illuminate red to indicate the heating plate is on when the cleansing brew is complete. Press and hold the CUPS button to turn the heating plate off, and pour the hot water into the sink.
The one-time single cup setup process is now complete and you are ready to brew!

Brew Your First Single Cup

Place Mug & Pod
Place a mug on the drip tray.
If using a travel mug, remove the drip tray and place the mug on the drip tray base. Lift the handle and place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid.
High Altitude Brewing: While holding the brewer handle up, push down slowly on the K-Cup® pod in the pod holder until the bottom of the K-Cup® pod is punctured by the exit needle.
Brew & Enjoy!
Press the OZ button, then select your brew size. The OZ button and brew size button will remain illuminated while brewing – about 1 minute. Brewing is complete when the brew size button is no longer illuminated.
Lift the handle and dispose of the used K-Cup® pod. The brewer will be ready to brew another cup in about a minute.
We recommend using a Keurig® Rinse Pod or running a cleansing brew immediately after brewing hot cocoa or other sweetened pods to keep the needles clean.
NOTE: After 60 seconds, the brew buttons will be disabled. To reactivate, press OZ or CUPS.
” sizes=”(max-width: 247px) 100vw, 247px” alt=”” width=”247″ height=”478″ data-ezsrcset=”https://manuals.plus/wp-content/uploads/2021/07/10-122-155×300.png 155w,https://manuals.plus/wp-content/uploads/2021/07/10-122.png 473w” data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/07/10-122-155×300.png” />

Brew Your First Carafe

Place Carafe & Fill Basket
Fill the water reservoir to the MAX fill line.
Remove the filter basket drawer by pulling outward and insert a 12 cup paper filter into the filter basket. Add the desired amount of ground coffee (1 tablespoon of ground coffee per cup is recommended). Reinsert the filter basket drawer completely and make sure the carafe is on the heating plate.
NOTE: The maximum capacity for regular ground coffee is 15 tablespoons and 12 tablespoons for decaf. Exceeding this amount may cause overflow.

Brew & Enjoy!
Press the CUPS button and select your brew size. Once the brew is complete, the heating plate will automatically turn on and remain on for 2 hours – the CUPS button will illuminate red. To turn off the heating plate, press and hold the CUPS button until the light is no longer illuminated.
If you accidentally shut the heating plate off, press and hold the CUPS button until the red light illuminates to turn it back on.

Brewer Features

Smart Start heats then brews in one simple process. No need to wait for the brewer to heat before selecting brew size. Power on your brewer, add coffee, then select your brew size. The brewer will heat, then automatically begin brewing.
Single Cup Auto Off automatically turns your brewer off 60 seconds after the last brew for energy savings.
Carafe Auto Off automatically turns your heating plate off 2 hours after the last brew for energy savings.
Pause & Pour a cup mid-brew while brewing a carafe using the 20 second automatic pause feature.
NOTE: Removing the carafe for more than 20 seconds may cause the filter basket to overflow.

Caring for your Brewer

Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.
We recommend using a Keurig® Rinse Pod or running a cleansing brew immediately after brewing hot cocoa or other sweetened pods to keep the needles clean

CAUTION: Parts are not dishwasher safe.

Brewer Exterior

Keep your Keurig® brewer looking its best by cleaning the exterior from time to time. Just clean with a damp, soapy, lint-free, non-abrasive cloth. Never immerse the brewer in water or other liquids.

Drip Tray

The drip tray can hold up to 8 ounces of overflow and should be emptied and cleaned occasionally. To remove, slide it toward you, keeping it level to avoid spilling. Clean with a damp, soapy, lint-free, non-abrasive cloth.

Carafe & Carafe Lid

The Carafe and Carafe Lid should be cleaned after each brew. Rinse and clean with a damp, soapy, lint-free, non-abrasive cloth.
” sizes=”(max-width: 355px) 100vw, 355px” alt=”” width=”355″ height=”471″ data-ezsrcset=”https://manuals.plus/wp-content/uploads/2021/07/16-69-226×300.png 226w,https://manuals.plus/wp-content/uploads/2021/07/16-69.png 550w” data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/07/16-69-226×300.png” />

Heating Plate

Once the heating plate has cooled completely, gently wipe with a clean, damp cloth. Never use rough, abrasive materials or cleansers to clean the heating plate.

K-Cup® Pod Holder

To remove the K-Cup® pod holder from the brewer, lift the handle and grasp the top of the K-Cup® pod holder with one hand while pushing up on the bottom of the K-Cup® pod holder from underneath with the other until it releases. After cleaning, align the K-Cup® pod holder with the opening using the two front ribs as a guide and snap into place from the top.

CAUTION: There are sharp needles that puncture the K-Cup® pod above the K-Cup® pod holder and in the bottom of the K-Cup® pod holder. To avoid risk of injury, do not put your fingers in the K-Cup® pod holder.
NOTE: Used K-Cup® pod should be removed from the K-Cup® Pod Holder after brewing, or in part with the daily cleaning routine.

Funnel
The funnel can be removed from the K-Cup® pod holder by pulling on it until it pops off. To replace it, orient the snaps to the indent and just snap it back onto the K-Cup® pod holder.
” sizes=”(max-width: 380px) 100vw, 380px” alt=”” width=”380″ height=”358″ data-ezsrcset=”https://manuals.plus/wp-content/uploads/2021/07/017-300×282.png 300w,https://manuals.plus/wp-content/uploads/2021/07/017.png 328w” data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/07/017-300×282.png” />

Water Reservoir & Reservoir Lid

The water reservoir lid and water reservoir should be cleaned periodically with a damp, soapy, non-abrasive cloth. Rinse the reservoir thoroughly after cleaning.
This will ensure that no cleaning solutions remain in the area as they may contaminate the water supply.
After rinsing, fill the reservoir with clean water and return it to the brewer. Do not dry the inside of the water reservoir with a cloth as lint may remain. The water reservoir lid and water reservoir should not be put into the dishwasher.

NOTE: If you are using a water filter inside the water reservoir, remove it before cleaning. The filter cartridge should be replaced regularly as needed per filter instructions.

Filter Basket & Filter Basket Drawer

Remove the filter basket drawer from the brewer. Remove and discard the paper filter and ground coffee.
The filter basket and filter basket drawer should be washed in warm, soapy water and rinsed thoroughly. Dry all parts after use.

NOTE: Coffee grounds should be discarded and the filter basket should be rinsed clean after brewing, or in part with the daily cleaning routine

Exit Needle

Entrance Needle

Lift the brewer handle and locate the entrance needle on the underside of the lid. To clean all three holes in the needle, hold the brewer handle in the upward position and with your other hand, carefully insert a straightened paper clip into all three holes. Gently move it around to loosen any coffee grounds. Lower the handle completely and run two water-only brew cycles. Do not insert a K-Cup® pod.
TIP: Refer to support.Keurig.com for video instructions on cleaning the entrance/exit needles.

Descaling your Brewer

You should descale your brewer every 3-6 months. Properly follow the descaling procedure.
Depending on the mineral content of your water, calcium deposits or scale may build up in your brewer. Scale is nontoxic but if left unattended can hinder brewer performance.
Regularly descaling your brewer every 3-6 months helps maintain the heating element, and other internal parts that come in contact with water. Calcium deposits may build up faster, making it necessary to descale more often.

Descaling Procedure

Empty the water from the water reservoir. If using a Keurig® Water Filter, remove and set aside.

STEP 1: Descaling Solution Rinse

Power the brewer off.

Pour the entire bottle of Keurig® Descaling Solution into an emptied water reservoir. Then, fill the empty bottle with water and pour into the water reservoir. Do not add any K-Cup® pods or ground coffee.

Place a large mug on the drip tray, then press the OZ button to turn on the single cup side. Press the 12 button to start a single cup rinse brew. Pour the hot liquid into the sink

Make sure the carafe is on the heating plate. Press the CUPS button to turn on the carafe side, then press the 12 button to start a carafe rinse brew. When the brew is complete, pour the hot liquid into the sink. Press and hold the CUPS button to turn off the heating plate.

STEP 2: Rinse & Rest

Let brewer stand for at least 30 minutes.
After 30 minutes, discard any residual solution from the water reservoir and rinse thoroughly.

STEP 3: Fresh Water Rinse

Fill the water reservoir with fresh water to the MAX fill line.
Make sure the carafe is on the heating plate. Press the CUPS button to turn on the carafe side, then press the 12 button to start a carafe water brew. When the brew is complete, press and hold the CUPS button to turn off the heating plate. Pour the hot liquid into the sink.

Fill the water reservoir to the MAX fill line. Repeat the 12-cup carafe rinse 3 more times for a total of 4 brews. Refill the water reservoir and place a large mug on the drip tray. Press the OZ button to turn on the single cup side, then press the 12 button to start a single cup water brew. Repeat the 12 oz brew process three more times for a total of 4 brews.

NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descale is added. If this occurs, you may see only a small or no output dispensed, followed by the sound of air blowing out. If this occurs:

Turn off and unplug the brewer.
If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse the water reservoir thoroughly and refill with water.
Plug the brewer back in, power on, and repeat the Step 3 Fresh Water Rinse cycle. The brewer should begin to function normally as the solution is rinsed out and the scale is removed. If problem persists, allow brewer to sit unplugged for at least 30 minutes before continuing with the rinse.

Troubleshooting

Grounds in Your Coffee
Grounds may have gathered in the exit or entrance needles and can be cleaned using a straightened paper clip or similar tool.

Clean the exit needle of the K-Cup® pod holder. Refer to the Exit Needle care instructions.
Clean the brewer entrance needle. Refer to the Entrance Needle care instructions.
Carafe brewing – The maximum capacity for regular ground coffee is 15 tablespoons and 12 tablespoons for decaf. Exceeding this amount may cause overflow.

Reinserting the Filter Basket Drawer

To reinsert the filter basket drawer, line up the tab on the filter basket drawer with the rails on the front of the brewer. Insert the tab to the rails and push in firmly until it clicks.

Brewer Will Not Brew

After placing the K-Cup® pod in the K-Cup® pod holder, make sure that the handle is pushed down securely.
If the add water light is illuminated, add water to water reservoir. Fill to and not beyond the MAX fill line. Make sure the water reservoir is seated properly in its base. If the add water light continues to be illuminated even after refilling, contact Customer Service.
If all of the buttons blink simultaneously, contact Customer Service.

Brewing a Partial Cup or Carafe

Make sure there is enough water in the water reservoir to perform the selected brew size.
The exit needle may be clogged. Refer to the Exit Needle care instructions.
The water reservoir may have been removed during brewing. Replace the water reservoir and perform a rinsing brew without a K-Cup® pod.
The brewer may need to be descaled. If you have repeated the descale procedure on your brewer two times and it is still only brewing a partial cup, contact Customer Service.
The drip stop may be clogged. Remove the filter basket drawer and filter basket and rinse thoroughly to remove any grounds in the plunger.
If you live at a high altitude and experience short carafe brews, please contact Customer Service.

Brewer Does Not Have Power or Shuts Off

Make sure that you have pressed the OZ button or the CUPS button to turn the brewer on.
Plug brewer into its own grounded outlet. If the electric circuit is overloaded with other appliances, your brewer may not function properly. The brewer should be operated on its own circuit, separate from other appliances.
For energy savings, your brewer is set to turn off automatically 60 seconds after your last brew.
If the brewer still doesn’t have power, contact Customer Service.

Helpful Hints

Water quality varies greatly. If you notice an undesirable taste in your beverage (such as chlorine or mineral tastes), we recommend using bottled or filtered water. Do not use distilled water. You can also install a Keurig® Water Filter to help remove water impurities and improve beverage taste.

Carafe Brewing

• The maximum capacity for regular ground coffee is 15 tablespoons and 12 tablespoons for decaf. Exceeding this amount may cause overflow.
• When inserting a paper filter to the filter basket, make sure it is properly seated flat.
• If the brewer is not used for a few days, run a full carafe rinse brew to flush out the internal water

Service

Beyond these recommended cleaning and maintenance procedures, this brewer is not user serviceable. For service, please refer to the Warranty section of this guide.

Storage

If you store the brewer in a cold environment, you run the risk of water freezing inside the brewer and causing damage. When you prepare to use it after storage, we recommend rinsing the water reservoir with fresh water and running three rinsing brews without a K-Cup® pod, as well as running a 12 cup carafe brew with no ground coffee. If you plan to move your brewer to a different location, turn the brewer off, unplug it, and empty the water reservoir. If your brewer has been in an environment below freezing, please be sure to let it warm to room temperature for at least 2 hours before using.

CAUTION: Please ensure brewer is powered off and heating plate is cooled to room temperature before storing.
NOTE: If the brewer needs to be stored for an extended period of time (a few months or more), a full descaling can be conducted before and after storage to ensure the brewer is in its best condition.

Click or Call!

Have Questions?
We’re here to help. Visit support.keurig.com for step-by-step videos on cleaning, descaling, and more.

” sizes=”(max-width: 87px) 100vw, 87px” alt=”icon” width=”87″ height=”87″ data-ezsrcset=”https://manuals.plus/wp-content/uploads/2021/07/21-50.png 285w,https://manuals.plus/wp-content/uploads/2021/07/21-50-150×150.png 150w,https://manuals.plus/wp-content/uploads/2021/07/21-50-120×120.png 120w” data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/07/21-50.png” /> Still Need Help?
Give us a call at
1-866-901-BREW (2739)

Warranty

LIMITED ONE YEAR WARRANTY

Keurig Green Mountain, Inc. (Keurig) warrants that your brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you register your brewer on keurig.com/new so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase. If a replacement brewer is necessary to service this warranty, the replacement brewer may be new or reconditioned. If a replacement brewer is sent, a new limited one year warranty will be applied to the replacement brewer.

WHAT IS NOT COVERED BY THE LIMITED WARRANTY?

OTHER LIMITATIONS

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO YOUR K-ELITE™ BREWER, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states or provinces do not allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you depending on the state or the province of purchase.

HOW DO YOU OBTAIN WARRANTY SERVICE?
Keurig® brewers are high-quality appliances and, with proper care, are intended to provide years of satisfying performance. However, should the need arise for warranty servicing, simply call Keurig Customer Service at our toll free phone number 1.866.901.BREW (2739). Please do not return your brewer for servicing without first speaking to Keurig Customer Service to obtain a Return Materials Authorization (RMA) number. Keurig® brewers returned without a RMA number will be returned to the sender without servicing.

K-Duo EssentialsTM Coffee Maker

A. Water Reservoir Lid
B. Water Reservoir
C. MAX Fill Line
D. Water Reservoir Lock Tab Slots
E. Power Cord
F. Handle
G. Lid
H. K-Cup® Pod Holder (H and I are the K-Cup® Pod Holder Assembly)
I. Funnel
J. K-Cup® Pod Assembly Housing
K. Drip Tray Plate
L. Drip Tray
M. Drip Tray Base
N. Carafe and Lid
O. Heating Plate
P. Filter Basket
Q. Filter Basket Drawer

Coffeehouse taste in your own home.

FIND YOUR PERFECT POD
With over 70 brands and hundreds of varieties, find your match at
keurig.com/new

Keurig K-Supreme Plus Coffee Maker Manual

ItsManual — Mon, 21 Nov 2022 11:07:20 +0000

KEURIG K-Supreme Plus Single Serve Coffee Maker User Guide

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions

For household use only.
Do not use distilled water.
Scalding may occur if the handle is opened during the brewing process.
Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock, and injury to persons do not immerse appliance, cord, or plugs in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
The use of accessory attachments not authorized by the appliance manufacturer may result in fire, electric shock, or injury to persons.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Always attach plug to appliance first (if not permanently attached), then plug cord into the wall outlet. To disconnect, turn any control to ″off″ then remove plug from wall outlet.
Do not use appliance for other than intended use.
Use brewer in upright position only. Allow brewer to cool (90 min) prior to turning it in any position other than upright.
Do not immerse brewer in water.

For detailed brewer cleaning and maintenance instructions, videos, and the full Use & Care Guide visit Support.Keurig.com.

WARNING: Keep all plastic bags away from children.
CAUTION: Keurig® recommends using only Keurig® My K-Cup® Reusable Coffee Filter and Keurig® approved K-Cup® pods in this appliance. If the pod does not fit, do not force the pod into the appliance. The use of non-Keurig® pods or accessories may cause brewer malfunction or injury.
WARNING: There is extremely hot water under pressure in the K-Cup® pod holder during the brew process. To avoid risk of injury do not lift the handle or otherwise open the handle during the brew process.
POWER CORD INSTRUCTIONS:
1. A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
2. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
3. If a long detachable power-supply cord extension cord is used:
4. The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
5. If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord.
6. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
CAUTION: HOT COCOA/OTHER NONCOFFEE PODS: Immediately after using a hot cocoa/other non-coffee pod, run a hot water brew cycle without a pod to avoid the possibility of clogging the exit needle. DO NOT Let’s get assume the next user will do this.

WARNING, TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.

Keurig K Mini Coffee Maker

ItsManual — Wed, 30 Nov 2022 16:08:01 +0000

KEURIG K.Mini™ Use and Care Guide

Get the most from your new Keurig® brewer

Before You Brew

Plug & Power

Remove packing tape from brewer. Pull plug and extend cord from cord storage located at the back of the brewer. Plug into a grounded outlet.

Press the power button. The power button will illuminate.

Fill & Place

Add 1 cup (8oz) of water into a mug. Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines. Lower the lid and place your mug on the drip tray.

NOTE: Do not use distilled water.

Lift & Lower

Lift and lower the handle. Do not insert a K-Cup® pod. The brew indicator light will flash to indicate that the brewer is ready

Cleansing Brew

Press the brew button. The brew indicator light will illuminate solid, then begin to pulse while the brewer is heating. After about 2 minutes, the brew indicator light will illuminate solid again and the water will begin to dispense. Pour the hot water into the sink.

The one-time setup process is now complete and you are ready to brew!

Brew Your First Cup

Fill & Place Mug

Add desired amount of water into a mug (6oz minimum, 12oz maximum). Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines. Lower the lid and place your mug on the drip tray

Lift & Place Pod

Lift the handle. Place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid. The brew indicator light will flash to indicate that the brewer is ready. Do not remove the foil lid on the K-Cup® pod.

High Altitude Brewing: While holding the brewer handle up, push down slowly on the K-Cup® pod in the pod holder until the bottom of the K-Cup® pod is punctured by the exit needle.

Brew & Enjoy!

Press the brew button. The brew indicator light will illuminate solid, then begin to pulse while the brewer is heating. After about 2 minutes, the brew indicator light will illuminate solid again and the beverage will begin to dispense. Brewing is complete when the brew indicator light is no longer illuminated. When complete, lift the handle and dispose of the used K-Cup® pod.

CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process.

Brewer Features

Auto Off: Automatically turns your brewer off 90 seconds after the last brew for energy savings.

Cord Storage: Makes transporting your brewer convenient and keeps countertops tidy.

Travel Mug Friendly: Remove the drip tray to accomodate a travel mug.

Caring for your Brewer

Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.

Brewer Exterior

Drip Tray

The drip tray can hold up to 8 ounces of overflow and should be emptied and cleaned occasionally. To remove, slide it toward you, keeping it level to avoid spilling. Rinse and clean with a damp, soapy, lint-free, non-abrasive cloth.

Water Reservoir

The water reservoir should be cleaned periodically by wiping the inside of the reservoir and underside of the lid with a damp, non-abrasive, lint free cloth. Do not dry the inside of the water reservoir with a cloth as lint may remain. Allow the reservoir to dry completely.

K-Cup® Pod Holder

To remove the K-Cup® pod holder from the brewer, lift the handle and grasp the top of the K-Cup® pod holder with one hand while pushing up on the bottom of the K-Cup® pod holder from underneath with the other until it releases. After cleaning, align the K-Cup® pod holder with the opening using the two front ribs as a guide and snap into place from the top.

NOTE: Always remove and dispose of the used K-Cup® pod after brewing.

Funnel

Washing the funnel ensures a fresh beverage experience. The funnel should be washed regularly and can be removed from the K-Cup® pod holder by pulling on it until it pops off. To replace it, orient the snaps to the indent and just snap it back onto the K-Cup® pod holder.

Exit Needle

Entrance Needle

TIP: Refer to support.keurig.com for video instructions on cleaning the entrance/exit needles.

Descaling your Brewer

You should descale your brewer every 3-6 months. Properly follow the descaling procedure.

Descaling Procedure

STEP 1: Cleansing Rinse

Turn on your brewer.

Pour one third (4.6oz) of the Keurig® Descaling Solution into the water reservoir then add fresh water to the 10oz fill level.

Place a large ceramic mug on the drip tray plate.

Lift and lower the handle but do not add a K-Cup® pod.

Press the brew button.

Once solution is dispensed, pour the contents into the sink.

STEP 2: Internal Tank Soak

Repeat step 1, but when the brew indicator light turns solid, press the power button as the brewer starts to dispense.

Let the brewer stand for at least 30 minutes.

Press and hold the brew button until the solution begins to dispense. Continue to hold the button until all of the solution has been dispensed.

Pour the contents of the mug into the sink.

STEP 3: Fresh Water Rinse

Repeat step 1 using 12oz of fresh water only. Do not add Keurig® Descaling Solution. Repeat this step two additional times. You may need to perform additional fresh water rinse cycles if you notice any residual taste.

Turn off and unplug the brewer.
If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse the water reservoir thoroughly and refill with water.
Plug the brewer back in, power on, and repeat the Step 3 Fresh Water Rinse cycle. The brewer should begin to function normally as the solution is rinsed out and the scale is removed. If problem persists, allow brewer to sit unplugged for at least 30 minutes before continuing with the rinse.

Troubleshooting

Grounds in Your Coffee

Grounds may have gathered in the exit or entrance needles and can be cleaned using a straightened paper clip or similar tool.

Clean the exit needle of the K-Cup® pod holder. Refer to the Exit Needle care instructions.
Clean the brewer entrance needle. Refer to the Entrance Needle care instructions.

Brewer Will Not Brew

A minimum of 6oz of water is required to brew. Add an additional 2oz of water to the reservoir to ensure the minimum fill level has been met, then press the brew button. Repeat until the brewer begins to dispense.

Brewing a Partial Cup

Press the power button. Press and hold the brew button for 5 seconds until all of the water has been dispensed. Discard the contents into the sink. Press the power button to restart.
The exit needle may be clogged. Refer to the Exit Needle care instructions.
Clean the K-Cup® Pod Holder, see K-Cup® Pod Holder care instructions.
The brewer may need to be descaled. If you have repeated the descale procedure on your brewer two times and it is still only brewing a partial cup, contact Customer Service.

Brewer Does Not Have Power or Shuts Off

Make sure that the power button has been turned on.
Plug brewer into its own grounded outlet. If the electric circuit is overloaded with other appliances, your brewer may not function properly. The brewer should be operated on its own circuit, separate from other appliances.
For energy savings, the brewer automatically turns off 90 seconds after the last brew. Press the power button to restart.
If the brewer still doesn’t have power, contact Customer Service.

Helpful Hints

Water quality varies greatly. If you notice an undesirable taste in your beverage (such as chlorine or mineral tastes), we recommend using bottled or filtered water. Do not use distilled water.

Service

Beyond these recommended cleaning and maintenance procedures, this brewer is not user serviceable. For service, please refer to the Warranty section of this guide.

Storage

Empty the water reservoir before storing or transporting and take care to ensure that you store your brewer in a safe and frost free environment. When you prepare to use it after storage, we recommend rinsing the water reservoir with fresh water and descaling the brewer as detailed in the Descaling your Brewer section.

Click or Call!

Have Questions?

We’re here to help. Visit support.keurig.com for step-by-step videos on cleaning, descaling, and more.

Still Need Help?
Give us a call at
1-866-901-BREW (2739)

FAQS

Why did you change the shape of the Keurig K-Mini single serve coffee maker?

We have updated the K-Mini coffee maker with a new, sleek design. At less than 5” wide, the K-Mini coffee maker is our slimmest coffee maker.

What type of pods are compatible with the Keurig K-Mini coffee maker?

The K-Mini coffee maker brews Keurig K-Cup pods. It does not brew K-Carafe pods, K-Mug pods, Vue pods, or Rivo pods.

Can I use the My K-Cup Universal Reusable Coffee Filter with the Keurig K-Mini coffee maker?

Yes, the K-Mini coffee maker is compatible with the Keurig My K-Cup Universal Reusable Coffee Filter.

Does the K-Mini coffee maker have auto-off?

Yes, the Keurig K-Mini coffee maker will automatically turn off 90 seconds after the last brew.

an I adjust the size of my beverage with the Keurig K-Mini single serve coffee maker?

Yes, the K-Mini coffee maker brews any cup size between 6-12oz depending on how much water you pour into the reservoir.

What’s the big difference between the mini and the mini plus?

In addition to the features of the K-Mini coffee maker, the K-Mini Plus coffee maker has pod storage, a removable water reservoir, a strong feature, and a premium metallic finish.

Will the 9-pod holder from the Mini Plus fit this machine, also?

The pod holder that comes with the K-Mini Plus does fit on the K-Mini brewer.

Since Keurig coffee is so weak, I like to use just 4 oz of water. Is this possible with this machine?

No, the K-Mini coffee maker does not brew 4ounces of water. The minimum it will brew is 6 ounces.

Does it have three prongs?

The K-Mini coffee maker is manufactured with a 3 prong plug.

Can it brew regular coffee?

Yes, but you have to purchase a My K Cup Reusable Coffee Filter.

Will 7 1/4” travel mug fit?

Don’t think so… the available space is about 6 3/4 inches. You might remove the perforated overflow base and eeek out enough room for your travel mug, but at best it will be tight

Why can i not return this item? received it this past sunday and i found it cheaper at target?

It’s not from amazon

What are the watts?

The K-Mini coffee maker uses 1470 watts during preheating. After preheating complete, it only uses 10-15 watts.

Can we use for nescafé dolce gusto coffee capsules ?

The K-Mini Plus Coffee Maker is compatible with K-Cup Pods.

Where can i purchase the filter for using ground coffee?

The K-Mini Coffee Maker is compatible with the Keurig My K-Cup Universal Reusable Coffee Filter which can be used with your own ground coffee. Most retailers that carry the Keurig coffee maker will also carry the reusable filter.

Can you use standard k cups?

Yes, you can use any standard k cup.

Keurig K-Slim Coffee Maker Manual

ItsManual — Wed, 30 Nov 2022 10:57:38 +0000

Use & Care Guide

Get the most from your new Keurig® brewer

Before You Brew

Plug & Place

Remove the packing tape from the brewer. Plug into a grounded outlet. Place mug on drip tray.

Rinse & Fill

Remove the water reservoir lid, then lift the reservoir straight up to remove it. Rinse the reservoir with fresh water and fill it to the MAX FILL line. Replace the water reservoir, making sure the lock tabs engage with the brewer. Replace lid.

NOTE: Do not use distilled water.

Lift & Lower

Lift and lower the handle. Do not insert a K-Cup® pod. The brewer will power on automatically.

Cleansing Brew

The 3 cup sizes will blink. Press the 8oz button, then press the blinking brew button to start a cleansing brew. Pour the hot water into the sink.

The one-time setup process is now complete and you are ready to brew!

Place Mug & Pod

Do not remove the foil lid on the K-Cup® pod. Place a mug on the drip tray. If using

Brew & Enjoy!

The three brew-size buttons will blink. Select your brew size, then press the blinking brew button. The brew button will remain illuminated while brewing. Brewing is complete when the buttons are no longer illuminated. Lift the handle and dispose of the K-Cup® pod.

CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process.

keurig k-elite coffee maker manual

ItsManual — Sun, 19 Mar 2023 18:29:04 +0000

Before You Brew

Plug & Place
Remove the packing tape from the brewer and plug into a grounded outlet. Place a large mug (12oz minimum) on the drip tray.

Rinse & Fill

Remove the water reservoir lid, then lift the reservoir straight up to remove it. If you have a Keurig® Water Filter, install it now. Refer to your Water Filter Starter Kit for instructions. Rinse the reservoir with fresh water and fill to the MAX fill line. Replace the water reservoir, making sure the lock tab engages with the brewer. Replace lid.
NOTE: Do not use distilled water.

Power On

Press the power button the green power light will illuminate. The brewer will automatically begin heating the water. This will take about 3 minutes. Once the heating sound stops, the brewer is ready.

Cleansing Brew

Do not insert a K-Cup® pod. Press the HOT WATER button. The five brew buttons will blink. Press the small mug (8oz) button to start a cleansing brew. Pour the hot water into the sink. The one-time setup process is now complete and you are ready to brew!
NOTE: Between brew cycles, the brewer may take about a minute to reheat.

Place Mug & Pod

Place a mug on the drip tray. If using a travel mug, remove the drip tray and place the mug on the drip tray base. Lift the handle and place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid.
Do not remove the foil lid on the K-Cup® pod. High Altitude Brewing: While holding the brewer handle up, push down slowly on the K-Cup® pod in the pod holder until the bottom of the K-Cup® pod is punctured by the exit needle.

Brew & Enjoy!

Select your brew size — for bolder coffee, press the STRONG button before Select your brew size. The brew size and STRONG button, if selected, will remain illuminated while brewing — about 1 minute. For iced beverages, fill a 16oz plastic tumbler with ice. Insert any K-Cup® pod, then press the ICED button. The brewer will be ready to brew another cup in about a minute.
NOTE: For iced beverages, only use a plastic cup. Do not use glass.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process.

Brewer Features

Strong Brew increases the strength and bold taste of your coffee’s flavor. For bolder coffee, press the STRONG button and select your brew size. Iced Coffee: Brew hot over ice and enjoy cold. Makes full-flavored and delicious iced coffee. Hot Water on demand for instant soups and oatmeal. Smart Start heats and then brews in one simple process. No need to wait for the brewer to heat before selecting brew size. Power on your brewer, add coffee, then select your brew size. The brewer will heat, then automatically begin brewing. The clock allows you to set an Auto On time.

Programming Brewer Features
To program your K-Elite® brewer, use the settings button up and down arrows. After the feature is programmed, press C the settings button until you return to the home clock screen.Clock: Press the settings button once and use the up and down arrows to select the correct hour. Press the settings button again and use the up and down arrows to select the correct minutes. Temperature Control: Press the settings button 3 times and use the up and down arrows to select your preferred temperature. Auto On: Press the settings button until a sun icon appears. Then use the up and down arrows to turn the Auto On functionality “on.” Press the settings button again to set your preferred time, using the up and down arrows. Once you return to the home clock screen a sun icon will be present to let you know that the functionality is on.
NOTE: You must set the clock to enable to Auto On functionality. Temperature Control allows you to adjust the temperature from 187° – 192°. Auto On sets your brewer to turn on at a specific time. Auto Off automatically turns your brewer off 2 hours after the last brew for energy savings. You can also program your brewer to shut off in 15-minute increments after your last brew or remain on all the time. High Altitude ensures your brewer works properly at higher altitudes (5,000 feet).
NOTE: In High Altitude mode the temperature is not adjustable. If you attempt to adjust the temperature, the mountain icon will flash indicating that you are in high altitude mode.
Auto Off: Press the settings button and use the up and down arrows to set your preferred off time. Off time can be set from 15 minutes to 2 hours in 15-minute increments. A moon icon will appear on the screen to indicate your brewer is in Auto Off mode. To disable Auto Off, use the up and down arrows to turn the functionality “off.” The moon icon will no longer appear on the screen. To enable Auto Off, use the up and down arrows to turn the functionality “on.” The moon icon will appear on the screen. High Altitude: Press the settings button until you see the turn this setting on or off.
NOTE: In high altitude mode the temperature is not adjustable. If you attempt to adjust the temperature, the mountain icon will flash indicating you are in high altitude mode.

Caring for your Brewer

Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.

Drip Tray
The drip tray can hold up to 8 ounces of overflow and should be emptied and cleaned occasionally. To remove it, slide it toward you, keeping it level to avoid spilling. Clean with a damp, soapy, lint-free, non-abrasive cloth.

Water Reservoir & Reservoir Lid
The water reservoir lid and water reservoir should be cleaned periodically with a damp, soapy, non-abrasive cloth. Rinse the reservoir thoroughly after cleaning. This will ensure that no cleaning solutions remain in the area as they may contaminate the water supply. After rinsing, fill the reservoir with clean water and return it to the brewer. Do not dry the inside of the water reservoir with a cloth as lint may remain. The water reservoir lid and water reservoir should not be put into the dishwasher.
NOTE: If you are using a water filter inside the water reservoir, remove it before cleaning.

K-Cup® Pod Holder
To remove the K-Cup® pod holder from the brewer, lift the handle and grasp the top of the K-Cup® pod holder with one hand while pushing up on the bottom of the K-Cup® pod holder from underneath with the other until it releases. After cleaning, align the K-Cup® pod holder with the opening using the two front ribs as a guide and snap into place from the top.

Funnel
The funnel can be removed from the K-Cup® pod holder by pulling on it until it pops off. To replace it, orient the snaps to the indent and just snap it back onto the K-Cup® pod holder.

Entrance Needle
Lift the brewer handle and locate the entrance needle on the underside of the lid. To clean the holes in the needle, hold the brewer handle in the upward position and with your other hand, carefully insert a straightened paper clip into all the holes. Gently move it around to loosen any coffee grounds. Lower the handle completely and run two water-only brew cycles. Do not insert a K-Cup® pod.
TIP: Refer to support.Keurig.com for video instructions on cleaning the entrance/exit needles.

Descaling your Brewer

You should descale your brewer every 3-6 months. Properly follow the descaling procedure. Depending on the mineral content of your water, calcium deposits or scale may build up in your brewer. Scale is non-toxic but if left unattended can hinder brewer performance. Regularly descaling your brewer every 3-6 months helps maintain the heating element and other internal parts that come in contact with water. Calcium deposits may build up faster, making it necessary to descale more often.

Descaling Procedure
Before you begin, you will need a large ceramic mug, fresh water, Keurig® Descaling Solution, and access to a sink.Do not use a paper cup. Ensure that there is no beverage pod in the K-Cup® pod holder. Please allow approximately 45 minutes for the descaling procedure. Empty the water from the water reservoir. If using a Keurig® Water Filter, remove and set aside.

STEP 1: Descaling Solution Rinse
Press the power button to power the brewer off.Pour the entire bottle of Keurig® Descaling Solution into an emptied water reservoir. Then fill the empty bottle with water and pour into the water reservoir. Press the power button to turn the brewer back on.Place a large mug on the drip tray and run a rinsing brew by selecting the hot water button and selecting the largest brew size.

STEP 2: Descaling Rinse & Repeat
Repeat the rinsing brew process until the add water light is illuminated. Do not use a K-Cup® pod. Let the brewer stand for at least 30 minutes while still on. After 30 minutes, discard any residual solution from the water reservoir and rinse thoroughly.

STEP 3: Fresh Water Rinse
Fill the water reservoir with fresh water to and not beyond the MAX fill line.Place a large mug on the drip tray and run a rinsing brew using the largest brew size. Do not use a K-Cup® pod. Pour the contents of the mug into the sink.
Repeat brew process until you have completed at least 12 rinsing brews using the largest brew size. You may need to refill the water reservoir at least one time during this process.
NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added. If this occurs, you may see only a small or no output dispensed, followed by the sound of air blowing out. If this occurs:

Turn off and unplug the brewer.
If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse the water reservoir thoroughly and refill with water.
Plug the brewer back in, power on, and repeat the Step 3 Fresh Water Rinse cycle. The brewer should begin to function normally as the solution is rinsed out and the scale is removed. If problem persists, allow brewer to sit unplugged for at least 30 minutes before continuing with the rinse.

Troubleshooting

Grounds in Your Coffee
Grounds may have gathered in the exit or entrance needles and can be cleaned using a straightened paper clip or similar tool.

Clean the exit needle of the K-Cup® pod holder. Refer to the exit needle care instructions.
Clean the brewer entrance needle. Refer to the entrance needle care instructions.

Brewer Will Not Brew

After placing the K-Cup® pod in the K-Cup® pod holder, make sure that the handle is pushed down securely and the brew buttons are flashing.
If the add water light is illuminated, add water to the water reservoir. Fill to and not beyond the MAX fill line. Make sure the water reservoir is seated properly in its base. If the add water light continues to be illuminated even after refilling, contact Customer Service.
If 4, 6, 8, 10, 12oz, and ICED button lights are all on simultaneously, lift the handle and remove the K-Cup® pod (if present in the brewer). Close the handle and place a large mug on the drip tray. Press the power button once. The brewer may dispense hot water.
If 4, 6, 8, 10, 12oz lights all blink simultaneously, contact Customer Service.

Brewing a Partial Cup

The exit needle may be clogged. Refer to the exit needle care instructions.
The water reservoir may have been removed during brewing. Replace the water reservoir and perform a rinsing brew without a K-Cup® pod.
The brewer may need to be descaled. If you have repeated the descaling procedure on your brewer two times and it is still only brewing a partial cup, contact Customer Service.

Make sure that the power button has been turned on.

Plug the brewer into its own grounded outlet. If the electric circuit is overloaded with other appliances, your brewer may not function properly. The brewer should be operated on its own circuit, separate from other appliances.
For energy savings, your brewer is set to turn off automatically 2 hours after your last brew. You can program your brewer to automatically turn off in 15-minute increments by adjusting the settings.
If the brewer still doesn’t have power, contact Customer Service.

Adjustable Temperature Not Working

The temperature is not adjustable when set to High Altitude mode. When High Altitude mode is enabled, a mountain icon will be displayed on the screen. If you attempt to adjust the temperature, the mountain icon will flash indicating you are in high altitude mode.

OVERVIEW

Water Reservoir Lid
MAX Fill Line
Water Reservoir
Water Reservoir Lock Tab Slot
Power Cord
Handle
Lid
K-Cup® Pod Holder
and I am the K-Cup® Pod Holder Assembly)
Funnel
K-Cup® Pod Assembly Housing
Drip Tray Plate
Drip Tray
Drip Tray Base

Coffeehouse taste in your own home

FIND YOUR P PERFECT POD
With over 70 brands and hundreds of varieties, find your match at keurig.com/new