MINISO LT716 Sport Smart Watch Manual

MINISO LT716 Sport Smart Watch

CAUTIONS

1.  Charge the product fully before use.
2.  Do not wear it when you are swimming, having a shower or bath.
3.  If you are not going to use tt,e product for a long time, please charge it once every 3 months to maximize its lifespan.
4.  Do not use or store it below -1o·c or aoove 40C to avoid shortening the lifespan of device and battery. Keep the battery away from direct sunlight, fire, high t0mperature.

PARAMETERS

1.  BT version: 4.2
2.  Battery capacity: 3.7V 60mAh
3.  Waterproof: IPX4
4. Screen resolution: 126×128
5.  Input: SV::: 0.05A

PRODUCT OVERVIEW

1. Function button.
2. Display
3. Sensor

OPERATION INSTRUCTIONS

Charge the watch
Before first use, try to turn on the device to check if the battery level is low. If you failed, you should charge the product with a charger; then the watch will tum on automatically. Take out the main part of watch.

Install the main part into a computer or a power adapter for charging.

Install the watch app on your phone

Scan the QR code or go to the App Store to download and install the app. Supports: Android 5.0 or above, iOS 9.0 or above. Bluetooth 4.2

Device connection
Before first use, connect it to the APP for calibration. After the connection, the watch will automatically synchronizs the time. Enable bluetooth on your phone- open the APP – click ·Bind DeVice”

• After the pairing, the APP will automatically save the Bluetooth address of the watch, and when the APP is opened or running in the background, it will automatically search and connect the watch.
• For use on Android phone, the APP requires permissions to access sensitive data on your phone such as contact information; besides, you should allow the APP to n.m in the background.

Watch function 

•  Turn on: when the device is turned off, long press function button for more than 3s to tum it on.
•  Reset watdl: this operation will erase all data in the watch (such as the number of steps}.
•  Light up the SCf8en: when the device is turned on, short press the function button.
•  Set the ttiam& of dock page: the defRult dock page on the watch can be changed. You can control the settings by entering the .. more” menu. If there is no operation for 5s, the screen wil tum off automatically.

ACCESSORIES

• Watch x1
• User Manual x1

TROUBLESHOOTING

1.  The watch  unable to be pain1d with the cell phone.
   Solution: Confirm if the watch has been turned on, and if the Bluetoolh on your phone is toggled on. Then delete the product in the list, pair it with your phone again according to the User Manual.
2.  The watch Is unable to be tu med on.Solution: Confirm the battery level. Charge the watch fully if it is needed.
3.  Can the battery of the watch be replaced? Solution: No, this is lithium polymer battery, which is irreplaceable.
4.  The llnk between the watch and the cell phone has been disconnactad within 10 matars.
   Solution: Bluetooth is wireless so that it is very sensitive to objects bet-.veen the watch and the connected device. Check if there are any metal or other objects that may affect connection within the effective distance.

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, and  this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in acoordance with the instructions, may cause harmful interference to radio oommunications. However, there is no guarantee that interference win not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an ouUet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radiafTV technician for help. ‘”RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.