IMPORTANT SAFETY NOTES
Before using this product, read this manual carefully and keep it properly for future reference.
- Do not use this product for a prolonged time to avoid affecting your hearing.
- Do not use this product when driving.
- Do not play music in an extra-large voice.
Please use this product according to the local laws and regulations. - Please keep it dry.
- Containing a rechargeable battery, this product cannot be dismantled, altered, or replaced by yourself. Do not expose it to sunlight or fire sources.
- This mark indicates the product should not be disposed of in the same way as other household wastes in EU regions. The product should be recycled to ensure sustainable reuse of resources and to prevent potential harm to the environment and human health caused by non-control of waste management. To recycle the used appliance, apply the recycling system or contact the franchiser to recycle the product according to the environmental protection requirements.
PRODUCT AND ACCESSORIES
- Multifunctional button (MFB)
- LED indicator light
- Charging indicator light
- USB charging port
- Earphones’ charging contact point
- Charging cable
SPECIFICATIONS
| BT VERSION | V5.1 | FREQUENCY RANGE | 20Hz~20kHz |
| BT PAIRING NAME | MINISO-M1 | SENSITIVITY | 95±3dB |
| FUNCTION | Siri awakening, phone call, music | CHARGING PORT | micro USB |
| INPUTN | DC5V，500mA | TRANSMISSION DISTANCE | 10m |
| BATTERY | DC3.7V lithium battery 280mAh (charging case) | MUSIC TIME | 4~5h |
| DC3.7V lithium battery 40mAh (earphones) | CHARGING TIME | 1~2h | |
| STANDBY TIME | 90h | CALL TIME | 4~5h |
USAGE INSTRUCTIONS
Wearing Earphones
Take out the earphones from the charging compartment and wear them on your ears according to the LIR mark printed inside.
Pairing
After being taken out of the charging compartment, the earphones will be paired while the LED indicator will flash red and blue alternatively. Initiate the BT function on your mobile phone connected, after which the LED indicator will flash blue. and search Miniso M1 to
- Charging
- Charging compartment:
- After connecting the charging cable with the compatible DC adapter,
- plug the other end of the charging cable into the charging port to charge.
Charging earphones
Put the earphones into the charging compartment, making sure that the ear- phones’ charging contact points are in touch with the thimble inside the charging case to charge the earphones.The LED indicator light will stay on red when charging and turn off after charging Earphones will automatically power off when charging.
Functions/Operation of Earphones
| Function | Operation |
| Turn on | Take out the earphones from the charging case or long press MFB for 2 secs (at any one of the earphones) |
| Turn off | Put the earphones back to the charging compartment or press MFB for 3 secs (at any one of the earphones) |
| Pairing | Turn on BT and click “MINISO-M1” to connect |
| Single ear mode | Take out an earphone from the charging case. Single ear mode is on after pairing with the phone. |
| Both ears mode | Take out both earphones from the charging case. Stereo both ears mode is on after pairing with the phone.
Or take the other earphone out when using single ear mode to enter stereo both ears mode after auto pairing. |
| Disconnect | BT Disconnect from the phone |
| Play/Pause | Click on MFB（of any one of the earphones） |
| Redial | Double click on MFB（of any one of the earphones） |
| Next/Previous song | Press MFB of the left earphone for 3 secs to the next, press MFB of the right earphone for 3 secs to the previous |
| Siri
awakening |
Press any MFB for 1 sec to awaken Siri |
| Receiving call | When there is incoming call, click on MFB to receive call (at any one of the earphones) |
| Rejecting call | When there is incoming call, press MFB (at any one of the earphones) for 1 secs to reject call. |
| Low power prompt | Earphones will automatically turn off when the voltage is lower than 3.2V. |
FCC Warning
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device múst accepts any interference received, including interference that may cause undesired operation.
Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
