MODEL: MAMP1

Home Theater-Stereo System, Wireless Connection, MP3/USB/SD Readers, FM Radio, Power amplifier

USER MANUAL

Please read these operating instructions carefully before use.
They will acquaint you fully with its features.

This product adopts highly advanced digital techniques, high powered, four-channel outputs to be the media center of your living room. It includes an AM/FM tuner, MP3/wireless connection input headphone jack. This hybrid amplifier also has sub-out and pre-outs for a variety of applications.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DON’T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION!
*Designs and specifications are subject to change without notice.

FEATURES

• PRE-Amp with FM Tuner
• CPU management of all functions, remote sensor digital fluorescent output displays all the functions
• Separate gain control of pre-amp
• FM Quartz synthesized Tuner, auto station seek and store, 30 stations storage, with both manual and automatic tuning
• Wireless connection/MP3 Input
• Digital karaoke system
• Overheat, over current protection
• Wireless connection receiver features that make listening to music more convenient Before you can use a wireless connection device, it must be paired and connected. Make sure that Wireless receive is activated on your device before you begin the If you need a username, please search for the wireless connection network name: Moukey MAMP1

PRECAUTIONS

1. Power Source: The unit should be connected to a power supply AC-115/60Hz, AC-230V/50Hz.
2. Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventilation. Place the unit at least 10cm away from the walls.
3. Water and moisture: The unit should not be used near water-for example, near a swimming pool, in a wet basement, etc.
4. Electric Shock: If a metal objects, such as a hair pin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result. For families with children, never permit children to put anything, especially metal, inside this unit.
5. Enclosure Removal: Do not open the unit as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.
6. Abnormal Smell: If an abnormal smell or smoke is detected, immediately turn the power OFF and pullout the power cord. Contact your dealer or nearest service station.

Fm remote operations steps:

1. Press TUNER MODE on the remote control
2. Pres MODE, and select FM
3. Press PRE/NEXT to select the stations you don’t want to keep;
4. Press AUTO to automatically search

OPERATION

1. POWER
   Use this button to turn ON or OFF the speakers.
   Caution: Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit.
2. INPUT SELECT
   Select the input source: CD/DVD, USB, Wireless Connection
3. MICROPHONE VOLUME: MIC VOL
   Adjust “MIC VOL” knob to increase or decrease the karaoke volume
4. ECHO
   Adjust “ECHO” to get a satiable echo e_ect.
5. TREBLE/BASS
   Turn TREBLE/BASS knob to adjust treble/bass tone master channel.
6. MASTER VOLUME
   You can adjust MASTER VOLUME from turning the right volume up, turn the left volume down.

CONTROLS & FUNCTIONS FRONT PANEL

1. HEADPHONE JACK: Headphone connect to this jack.
2. MIC INPUT JACKS 1 KARAOKE MIC: Connect to these jacks.
3. MIC INPUT JACKS 2 KARAOKE MIC: Connect to these jacks.
4. MIC VOLUME: Adjusts the volume level. Turn the knob clockwise to increase the MIC volume .
5. ECHO CONTROL: Turn the knob to adjust the MIC echo level.
6. BASS: Turn BASS knob to adjust bass tone master channel.
7. TREBLE: Turn TREBLE knob to adjust treble tone master channel.
8. BALANCE: Master balance knob
9. AUDIO INPUT JACKS: Connect the audio output jacks of AUX to these jacks.
10. INPUT: This is used to select the input sources: DVD/CD/AUX/MP3/Wireless Connection/FM
11. POWER SWITCH: Press to switch the power unit ON or OFF.
12. USB/SD: Card input
13. MODE: This is used to select the input sources MP3/Wireless Connection/FM
14. W: This is used to select the input sources Wireless Connection
15. PREV: Used to select the Previous station which has been kept in the system
16. PLAY/PAUSE: play/pause song button on USB/SD card
17. NEXT:Used to select the next station which has been kept in system
18. FUNCTION DISPLAYED LED WINDOW
19. FOLDER/TRACK: This is used to select the mp3 prev/next
20. MASTER VOLUME CONTROL: Adjusts the volume level. Turn the knob clockwise to increase the volume.

BACK PANEL FUNCTIONS

1. AUDIO INPUT JACKS: Connect the audio output jacks of DVD to these jacks.
2. AUDIO INPUT JACKS: Connect the audio ouput jacks of CD to these jacks.
3. LINE: LINE OUTPUT JACKS:Connect the RECORD input jacks to these jacks.
4. TUNER ANT: Connect for FM antennas.
5. SPEAKER OUTPUT TERMINALS:Connect your speaker system to these terminals.
6. 115/230 SWITCH: According to power voltage,push this button to the station of the 115V or 230V.
7. POWER CORD: Connect to AC 115V/60Hz & 230V/50Hz

REMOTE CONTROL

When the panel output knob is adjusted to MP3 / W gear, the remote control function will work

1. Under the mode of USB/FM/W mode -press this key to TURN ON /OFF
2. MODE: press the “MODE” to change the model (USB →FM→ W)
3. In the model of USB or SD playing,press this key you can get three functions: “ONE” is Single song loop ; “ALL” is all the song loop ; cancel loop
4. FM ch-:Next channel in FM mode
5. Equalizer: Under USB,W, FM playback, press this key to loop 5 kinds of equalizer effects
6. FM ch+: Previous channel in FM mode
7. Previous song in USB/W mode
8. Under USB/W playback,press this key one time is a pause,press again will recover Under FM playback,press this key to search channel automatically.
9. Next song in USB/W mode
10.  Decrease volume in USB.W.FM mode
11. Increase volume in USB.W.FM mode

The function of digital key
In USB or FM mode, digital buttons can quickly select music and radio stations.
For example: to select the first song in USB, press 01; if you want to select the first radio station (after it has been automatically searched), press 01.

Remote Controller operation

1. The remote controller should be operated within 6 meter and the scope of 30° in front of receiver.
2. Make sure that there is no big obstacle between remote controller and machine.
3. The remote sensor should be far away from the light, high amounts of light can affect its performance.

SAFETY INSTRUCTIONS

1. Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit.
2. When more than one pair of speakers are used, (specially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise the unit maybe damaged under high power or long-term operation.
3. To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted.
4. For speaker cords, strip off the vinyl coating and twist the wire tip. Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause short circuit when wires of different terminals contact each other.
5. After the unit is turned ON, adjust the main volume to the desired level same with bass and treble volume, etc.

Features:

• Home Theater Amplier Receiver System
• Ability to Connect External Devices & Speakers
• Built-in Wireless receive for Wireless Music Streaming
• MP3 Digital Audio File Support
• USB Flash & SD Memory Card Readers
• FM Radio with LED Display
• (2) 1/4’’ Microphone Inputs
• RCA (L/R) Audio Input/Output
• Banana Binding Post Speaker Output Jacks
• Front Panel Button Control Center
• Echo, Bass, Treble, Sub, Mic Volume Adjustable
• Includes Remote Control & Power Cable Wireless Connection Connectivity:
• Instantly Receives Wireless Music Streaming
• Works with all of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, etc.)
• Wireless Connection Version: 5.0 Wireless connection name: Moukey MAMP1 Technical Specs:
• Peak power : 110 x 2 watts
• Frequency Response:20Hz-20KHz(+/-2dB)
• T.H.D.: <1%
• Signal-to-Noise Ratio: 80dB
• Input Sensitivity: 400mV Aux, 6mV Mic
• Radio Station Memory: 30 Presets
• Maximum USB/SD Card Support Size: Up to 32 GB
• Digital Media File Support: MP3, WMA,WAV,FLAC,APE.
• Power: 115/230V, Switchable

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

MouKey MTS10-2 Trolley Speaker

To Customers
Welcome to purchase and use Mou key Digital Multimedia Trolley Speaker. To ensure that this speaker could bring you desired effects when using it, please read this instruction carefully.

This product can be connected to sound equipment such as PC, TV, CD, VCD, DVD, TUNER, TAPE, USB, SD card, etc. With outstanding sound quality, this trolley speaker is portable, multifunctional and perfectly designed. We are confident that it will give you a completely new feeling.

Safety Instructions

To ensure safe use, please read this instruction carefully before using this product and use it in a right way according to the instruction. Please keep this instruction properly for future
reference.

• Power: The product can only work with power supply which is indicated in this instruction or specified in the product.
• Mind Electricity Shock: Don’t plug or unplug the power supply with wet hands to prevent the electricity shock.
• No Heavy Objects & Overheating: Do not place heavy objects on the product. It should avoid sun burning and keep away from hot source e.g. oven. No raining or immersion or put it in high temperature or moist conditions.
• Rear Plate Dis-assembly: Please do not disassemble the rear plate. If repair is needed, please ask the professional to operate.
• Power Line Protection: Power line should not be stepped dragged.
• Non-use Period: If you do not use this product for a long time, please turn off the power and unplug the power supply.
• Don’t use low power voltage regulating and regulated power supply, to avoid burning down the product or the regulated power supply.
• The Speaker Top: Don’t place objects like vase or container filled with liquid. Please maintain air ventilation to dissipate heat.
• This product is only suitable for use in places below 2000meters above sea level. It may cause danger risk when it is used over 2000 meters above sea level.
• This product is only suitable for use under non-tropical climate conditions. It may cause danger risk when it is used under tropical climate conditions.

Parameter & Data

Mobile Speaker System

• High-powered PA speaker style
• Wireless music media function
• Multi-color automatic flashing LED party lights
• Built-in rechargeable battery
• FM radio with digital display screen
• Aux (3.5mm) input
• USB, TF flash card reader
• 1/4″ microphone input
• Battery energy LED indicator light
• Solid and durable mold pressing cabinet design
• Convenient rolling wheels and retractable handle
• Suitable for indoor and outdoor party, crowd control, Karaoke

Wireless Streaming Media

• Wireless streaming media
• Simple and relaxing matching
• Suitable for present newest devices like mobile phone, tablet, laptop and
• computer, etc.
• Wireless range: 20 meters max
• wireless connection name: Mou key MTs10-2

Package includes:

• Speaker
• Remote control,
• instructions

Specifications

• RMS: 160W
• Sound System: 10-inch Speaker, 3.5″ Tweeters
• Impedance: 4 Ohms
• Frequency Response: 55-20kHz
• S/N Ratio: 76dB+/-3dB
• SPI: 94dB (1W/M)
• TH.Do : <10%
• USB Type: 2.0
• Digital Audio Document Support: Mp3
• Max USB Flash Support: 32GB
• Battery Life: 3 hours (Charging time: about 6 hours)
• Battery of Remote Control: 1.5V AA battery x 2 ( Not included )
• Rechargeable Battery: 12V4.5V Lead-acid battery
• Power:AC 100-240V,50-60Hz, 15V==2000MA adapte
• Dimensions (L *W*H): 12.4″ x 12.4″ x 22.4′
• Dimensions (L *W*H):367x367x626mm

Instructions for Function & Operation

1. USB:USB input port (Up to 32gb)
2. TF:TF card input port (Up to 32gb)
3. AUX:Aux audio input (Use it when the type is “LINE”)
4. DC 15 V:Charging socket
5. LED Light: Charging light indicator (Red light is charging, green light is full)
6. MIC VOL: Adjust microphone Volume
7. VOLUME:Adjust speaker Volume
8. BASS: Adjust music bass
9. ECHO: Adjust microphone echo
10. TREBLE:Adjust music treble
11. MODE: Mode conversion button: wireless connection, FM, AUX, three-mode conversion (Press the button for a while to hide the original singer vocal and play an accompaniment when playing music, do it again to recover the original singer vocal.)
12. < Previous: Previous song at music playing mode ( Previous channel at FM mode)
13. >Play/Pause the music (Automatic searching channel at FM mode)
14. LED display screen (respectively shows wireless connection, Line and FM mode)
15. >Next song for music playing mode( Next channel at FM mode)
16. REC: When USB disk is inserted, press this button to record, and press it again to play
17. Repeat playback of U disk or SD card content/Bluetooth TWS function (detailed introduction on the last page)
18. POWER: Main power switch ON/ OFF
19. LED light ON/OFF
20. MIC1 IN: Wire microphone input 1
21. MIC2 IN: Wire microphone input 2
22. POWER: Main power switch ON/ OFF
23. Press the number key to quickly select songs at USB disk playing mode
24. EQ: Press the EQ button to change the sound effect at USB disk playing mode
25. Repeat play at USB disk playing mode
26. Previous: Previous song at USB disk playing mode ( Previous channel at FM mode)
27. VOL-: decrease volume
28. MODE: Mode conversion button:wireless connection, FM, AUX, three-mode conversion (Press the button for a while to hide the original singer vocal and play an accompaniment when playing music, do it again to recover the original singer vocal.)
29. MUTE: Silent at USB disk playing mode
30. Press the scan key to automatically search channel at FM mode
31. Next song at USB disk playing mode( Next channel at FM mode)
32. Play/Pause the music (Automatic searching channel at FM mode)
33. VOL +: increase volume

Overlapping function operation

1. Aux input: Press the MODE button to turn to LINE mode and use the 3.5 mm audio cable provided by our company to receive external audio.
2. At playing music mode, press the MODE button for a while to hide the original singer vocal, enabling you to enjoy singing. Press it again to recover singer’s singing whenever you want.
3. Turn to FM mode, press the button to automatically search FM channel, press this,.. to play the previous channel and press this … to play next channel
4. At USB disk mode, press this button to have audio recordings with VHF microphone and press again to playback the record
5. Press the button _Q at playing music mode to open the microphone( Microphone priority function: when playing the music and using the microphone at the same time, when microphone speaks the music will be automatically paused, resume the music playing after speaking finished. And press it for a while to close the microphone.)

Detailed operation of serial Bluetooth TWS
Must have two products of the same model

1. When the first product is switched to “BLUE” mode, when the Bluetooth connection to the mobile phone hears two beeps, it means the connection is successful, and the machine defaults to the host.
2.  The second product switches to the “BLUE” mode, press and hold the “TWS” button for 2 seconds, after hearing the English prompt, TWS succeeds with the host, and the product defaults to the slave.

Exit Bluetooth TWS detailed operation
In the “BLUE” state, the master and slave press and hold the “TWS” button for 2 seconds to exit Bluetooth TWS.

Bluetooth TWS FAQ

1. After the TWS is successful, when playing the stereo sound source, the main and sub-units respectively interpret the left and right channels.
2. In TWS playback state: the volume and tone are independently controlled by the main and auxiliary computers; the previous song, the next song, play/pause functions, and the main and auxiliary computers at the same time. (Same for remote control)
3. Please exit TWS before the secondary machine is turned off, otherwise the machine will automatically reconnect after turning on the machine.

MODE Button

REC function description

Note: Recording notes, audio equipment can only recognize U disk or TF card below 32G, the USB or TF card for recording must have MP3 songs to record (If you insert a larger capacity U disk and TF, the system may not recognize the inserted device )
(Note: Background music cannot be recorded)

Recording function

Short press the REC key ! to record, then short press to stop recording, and play the just recorded file, (if there is an old recording file,

it will automatically continue to play down other recording files, or MP3 songs.) (without MP3 content) USB or TF card, cannot record, please store an MP3 in USB or TF.)

Recording playback function
If you have recorded multiple files, press the “up next song” to select the recording to play, or short press the repeat button to play back a single recording, or you can repeat all the recordings.

Recording deletion function:
In the playback recording state, if you want to delete the playback recording file, long press the REC button  to delete the REC current playback recording

Precautions for using built-in battery

1. Fully charge the battery before using it for the first time, the indicator light will turn green when fully charged, or the digital display will show full power
2. Each time the battery Is fully charged, after the Indicator light tums green, charge it for about 2-3 hours. At this time, the battery is at its full capacity.
3. When the sound Is abnormal or the battery indicator is too low, pleaae charge It In time.
4. When charging, try not to turn the audio volume to the maximum to listen to music.
5. If you do not use it for a long time, please fully charge it and store It, and recharge It every 3 months to avoid battery failure.

Bluetooth cannot conn act to the solution.

1. Is the speaker In Bluetooth receiving and playing status?
2. The Bluetooth device cannot be found (whether the Bluetooth speaker and the Bluetooth mobile phone are within the effective receiving range Object blocking 6-8 meters))
3. There are too many Bluetooth mob lie phone connected device name records, please clear the name records of too many Bluetooth devices connected on the phone.
4. Try to turn off the bluetooth speaker and turn it on again, turn off the bluetooth transmission status of the bluetooth mobile phone, restart the bluetooth transmission status of the mobile phone, and then search for the bluetooth sound device note.

FCC statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.