Paxcess Orobotic Pool Floor
Cleaner User Manual

Thank you for purchasing PaxcessRobotic Pool Cleaner. If you have any questions or issues, please contact our customer services team for further assistance.
Email: [email protected]
Free Call: (US) (877)-756-8666 Service Time: Mon.-Fri.: 9:00-17:00 PST
Facebook: @paxcess
Website: www.paxcess.com

Important Precautions

1. ln order to avoid any accident/damage, it is strongly recommended to fix the power supply unit in 3.Sm away from the swimming pool by using the safety rope (included in the package).
2. ln order to prevent severe damage to the cleaner, never power on the unit when it is outside of the swimming pool.
3. The power cord must be connected to an appropriate earthed socket.
4. Hold the top handle when putting the cleaner into water or lifting out of the water, do not pull the cable. Before power on, make sure to empty the trapped air inside the cleaner (no more air bubbles coming from the cleaner and the cleaner is fully submersed on the pool bottom).
5. Before power on, make sure the filter be assembled in position and cable be fully released to avoid any winding, which could affect the
   cleaner’s performance or cause damage.
6. Please clean and wash the filter bag every time after use.
7. The cleaner should be stored in a cool and ventilated place, away from direct sunlight when not in use.
8. The power supply unit should be placed in a shaded area during working. In order to avoid overheating and potential damage of components, never cover the power supply unit.
9. Only authorized after sales service personnel should open the cleaner’s power supply unit and motor assembly, otherwise the warranty will be invalidated.
10. Do not use the cleaner beyond the working environment/conditions stated in this manual.
11. Make sure the PH of pool water is between 7.0-7.2.
12. This machine is for clean the pool only not for other purpose. Read carefully the user manual before use.

Attention

When put the cleaner into the water please hold the top handle make sure to empty the trapped air inside, then the cleaner can immerse into the pool floor.

When pulling cleaner out of water, suspend the cleaner above water for about 10-15 seconds to empty the water inside. Please holds the top handle only, never pull the cable.

Introduction

The robotic pool cleaner HJ2052 is a new type of highly efficient and energy-saving swimming pool cleaning robot . Through its advanced computer controlled program, it can clean the pool walls and bottom automatically. At the same time, it filters the pool water and gets rid of suspended particles without replace the pool water. It’s totally environmental-friendly.

For safe operation, the cleaner works on 28V direct current. Please read this user manual carefully before use.

Safety

1. Power supply unit position:
   Power supply unit needs to be placed in proper position so as to reach the distal end of pool for the cleaner, meanwhile as least 3.5m from pool edge.
2. Free Safety Rope Comes with Machine
   Please use the safety rope to fix the power supply unit, which can avoid the power supply unit drop off your pool.

Specifications

Operation instructions

Filter cleaning

1. Slide the two clips according to the indications on the top cover to open it and take out the filters.
2. Clean the filters.  Re-install the filters, pay attention to the good position and slide the two clips to close the top cover.
3. Foam Installation
   Attention: If your robot is in good performance, please ignore this instruction.
   The below instruction is only used for special situation where the robot has difficulties to climb the pool walls.
   Stick two foams on the reverse surface of top cover (see below picture), make sure the two foams are in the middle part of top cover.
4. Roller-Foam
   In order to ensure the performance of the machine for the first time use, it is normal and all right if the two rollers of the machine are wet at your receipt of the robot. And it is recommended that before each use, if the rollers are dry, please immerse the machine into water for 15-20 minutes and wait for the rollers to fully absorb water, then switch on.

Packing list

Trouble Shooting

The pool water condition must be within the following parameters:

Caution:

Warranty

Email: [email protected]

CAUTION – To reduce the risk of fire, electric shock, or injury:

1. To provide continued protection against risk of electric shock, connect to properly grounded outlets only.
2. Check that the main voltage corresponds to the voltage indicated on the rating label,see specifications as below:220~24ov, 50/60Hz, 1300W
3.  This product is designed for domestic use only.
4. Do not use outdoors.
5. Do not leave the Folding Mop unattended while switched on. Turn off the switch and unplug the electrical cord when not in use and before servicing.
6. Do not allow to be used as a toy. Close attention is necessary when used near children, pets or plants.
7. The appliance is not intended for use by person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
8. Young children should be supervised to ensure that they do not play with the appliance.
9.  Never direct steam towards people, animals, plants, or equipment containing electrical components, such as interior ovens.
10. Do not immerse the Folding Mop into water or other liquids.
11. Do not use with damaged cord or plug. If the Folding Mop is not working as it should, has been dropped, damaged, left outdoors, or immersed into water, return it to the distributor before continuing use. If the supply cord is damaged, it must be replaced by the manufacturer or a similarly qualified person to avoid a hazard.
12. Do not pull or carry by cord, use cord as a handle, close a door on the cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
13. . Never force the plug into an outlet.
14.  Do not use extension cords or outlets with inadequate current carrying capacity
15. Unplug the appliance after use and before carrying out user maintenance on the appliance. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
16. Do not handle plug or Folding Mop with wet hands or operate without shoes.
17. Do not insert any objects into openings. Do not use with any opening blocked.
18.  Do not use without floor cloth in place. Do not use without water in the water tank.
19. When using on stairs use extra caution.
20. Store your Folding Mop indoors in a cool, dry area.
21. Keep your work area well lighted.
22. Never put any cleaning detergents into the Folding Mop. This will make the operation unsafe and damage the unit.
23. Never block the steam openings of the product or place it on a soft surface, where the steam openings may be blocked. Keep the steam openings free of lint, hair, and the like.
24. Use only as described in this manual. Use only manufacturer’s recommended accessories.
25. Do not use in swimming pools containing water.
26. this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and
    knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Product Features/Specifications:

Accessoreis:

lx Measuring cup
lx Microfiber Cloth Pad
lx Carpet glider
lx instructional manual

Components:

1. Handle
2. Quick Clamp for Height Adjustment
3. Telescopic Pole
4. Power LED light
5. Main Body with Water Reservoir
6. Mop Head
7. Power Cord Hooks
8. Measuring Cup
9. Mop Pad(for Carpet Cleaning)X2
10. Mop pad with Velcro
11. Carpet Glider

Product Specification:

1. insert the Telescopic Pole into the Main Body, Gently press the Telescopic Pole until it is lock in place(See Figure2). To disassemble the Telescopic Pole, press the Telescopic Pole Release Button on
   the Main Body and pull out the Telescopic Pole.
   
      Figure  2                                              Figure  3
2. Extend the Telescopic Pole to its full length
3. Attach the Mop Pad
   3.1 For smooth floor cleaning, stick the Mop Pad(the one with Velcro closures) to the Mop Head firmly(see Figure 4)
   
   Figure  4                                       Figure  5                                    Figure  6 

3.2 For carpet cleaning, put the Mop Pad(the one without Velcro closure) one the Carpet Glider, the install the Carpet Glider to the Mop Head(see Figure 5). Figure SCaution:Attach the Mop Pad only when the appliance has cool down completely and no steam spraying out from the Mop Head . Ensure the Mop Pad is assembled well on the Mop Head every time before use. Never operate the appliance without Mop Pad.

Use Instructions:

1. After the appliance is fully assembled, remove the cover on the Water Reservoir, fill in water to the Maximum mark, avoid overfulling. Then replace the cap(see Figure 6). Figure 6Caution:Do not fill in hot water into the water reservoir, nor fill in chemicals like cleaning agents, oil, perfumes etc.Doing so may destroy the appliance.The appliance will automatically shut off when lack of water. Pay attention to the level during operation and refill water in time.
2. Plug in and select the steam setting. Wait for approximately 20 seconds,the steam comes out and the unit is ready to use.
3. The unit can automatically shit to Standby Mode when the Main Body is placed vertically to the ground(see Figure 7).
4. The unit is equipped with Head Lamp,for better visibility in dark places or under furniture(see Figure 8).
   
     Figure 7                                                Figure 8  

Maintenance and Cleaning

1. After operation,turn off and unplug the unit, wait till the unit cools down completely(approximately30 minutes). Figure 9
2. Press the Telescopic Button on the Main body and pull out the Telescopic Pole, and drain the water reservoir(see Figure 9).
3. lnstall the Telescopic Plod back to the Main Body. Wrap the Power Cord around the Power Cord Hook(see Figure 10)
4. Remove the Mop Pad to clean
   
       Figure 9                                      Figure 10

Troubleshooting