N30 Arcade Stick
Instruction Manual
Bluetooth Connection
N30 Arcade Stick will auto reconnect to your devices once it has been successfully paired.
Android (D-Input)
1. Select DINPUT MODE via DINPUT/XINPUT Switch, then press START to power on the joystick.
Blue LED will blink once per cycle
2. Press and hold PAIRING button for2 seconds to enter pairing mode Blue LED wil rapidly blink.
3. Enter your device’s Bluetooth setting to pair with [8Bitdo x Arcadel. LED will be solid blue
when connection is successful.
Windows (X-Input)
1. Select XINPUT MODE via DINPUT/XINPUT switch, then press START to power on the joystick.
Blue LED will blink twice per cycle.
2. Press and hold PAIRING button for 2 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Enter your devices Bluetooth setting to pair with [8Bitdo & Arcade(x]. LED will be solid
blue when connection is successful.
.USB Connection: connect your N30 Acade Stick to your Windows device via USB Cable after step 1
.D-input and X-input modes can be interchanged while playing.
macOS
1. Press and hold START + Ato power on the joystick. Blue LED will blink three time per cycle.
2. Press and hold PAIRING button for 2 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Enter your device’s Bluetooth setting to pair with [Wireless Controller]. LED will be solid blue.
when connection is successful.
• USB Connection: connect your N30 Acade Stick to your macOS device via USB Cable after step 1.
Switch (by default)
1. Press and hold START + Y to power on the joystick. Blue LED will blink four time per cycle.
2. Press and hold PAIRING buton for2 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order.
4. Blue LED will be solid blue when connection is successful.
• When connected to your Switch, DOWN + SELECT = Switch HOME button.
Battery
| Status | LED indicator |
|---|---|
| Low battery mode | Red blinking LED |
| Battery Charging | Green blinking LED |
| Battery fully charged | Green LED turns off |
- Built-in 480 mAh Li-on.
- 18 Hours of play time.
- Rechargeable via USB cable with 1-2 hour charging time.
- Press START for 8 seconds to force turn off your Arcade Stick.
Power Saving
- Joystick enters sleep mode in l minute with no Bluetooth connection.
- Joystick enters sleep mode in 15 minutes with no use
- Use the joystick to wake your N30 Joystick。
Support
Please visit support.8bitdo.com for further information and additional support.
