BYTECH BY-AU-BS-171-BK On-The-Go Speaker Manual

BYTECH BY-AU-BS-171-BK On-The-Go Speaker with A Built-In Handle User Manual

Notice: Please read user manual carefully and keep it for

your records.
l – Bluetooth Speaker
l – Micro USB AUX/DC 5V cable
l – Instruction Manual

Warnings:

Do not let small children play this product – Do not expose the speaker to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
Do not use abrasive cleaning solvents to clean the speaker.
– Store the speaker out of direct sunlight and extreme temperatures (above 45°C/l l3°F or below -l0°C/- l4°F), as this may shorten the battery life. affect the operation or degrade the performance of your speaker.
Do not dispose of the speaker in a fire as it might result in an explosion. – Do not expose the speaker to sharp objects as this will cause scratches and damage.
Do not drop the speaker. This may cause damage to the internal circuitry.
Do not attempt to disassemble the speaker. This may cause damage to the internal circuitry.
If the speaker is left for long period without use, charge once per month to avoid the overconsumption of the battery. When charging the unit. please turn off the power switch. so as not to damage the battery.
This appliance is for indoor use only. Please do not use or store the unit in high temperature or hazardous locations. Please do not submerge the unit into water, as this will ruin the speaker.
The unit comes with a rechargeable battery, so please do not throw or put it in a fire to avoid explosion.
The warranty for this product is invalidated if the product has been tampered, repaired or modified in any way.

BLUETOOTH:

Turn on the speaker, Once powered on it is already in
Bluetooth mode. Turn on your device’s Bluetooth and then scan for new devices and look for BY-BS-17 l.
Once found, pair with it. After pairing, devices can connect with each other automatically.

USB PORT: Press “MODE”button on the product to

switch to USB mode or just insert a Micro SD card. USB mode will be started automatically.

Press “PLAY/PAUSE” button to Play/Pause music.
Press “NEXT” button to play the next song.
Press “PREVIOUS” button to play the previous song.

MEMORY CARD:

Press “MODE” button on the product to switch to TF mode or just insert a Micro SD card. TF mode will be started automatically.

Press “PLAY/PAUSE” button to Play/Pause music.
Press “NEXT” button to play the next song.
Press “PREVIOUS” button to play the previous song

FM RADIO:

Press “MODE” button on the product to switch to FM mode. FM mode will be started automatically.

Press “PLAY/PAUSE” button for few seconds to enter automatic FM channel searching. Press the button again to stay on the channel you want.
Press “NEXT” button to go to next frequency.
Press “PREVIOUS” button to track back to the previous frequency.

TWS CONNECTION

TWS Connection is only for two BY-AU-BS-171-BK speakers.
Turn on the Speakers.
Double click the PAUSE Button, then both speakers will connect as a pair .
Exit TWS: Double click the PAUSE Button again to exit WTS function.

SPECIFICATIONS:

With FM, Bluetooth®, AUX, MIC input jack, USB/TF card, TWS function
Input: 5V
Battery Capacity: 1200 mAh
Sound output: 5 W
Charge time: up to 3 hours
Play time: up to 5 hours
Standby time: up to 12 days
Operating range: 33 feet (l □ m)
Battery: 3.7V Built-in Li-ion
Frequency Response: 100Hz-18KHz
Speaker Unit: 4 lnches”l
lmpendance: 2 ohm
SNR’.~85dB
Compatible with most Bluetooth® enabled tablets and smartphones.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Bytech NY INC. warrants this product to be free from defects in materials and workmanship to the original purchaser for a period of 12 months from the original purchase date. Bytech’s responsibility with regard lo this limited warranty shall be limited solely to repair or replacement as its option, of any product which fails during nom1al consumer use. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. At any time during the 12 month period following the purchase, the product fails due to defects in material or workmanship, return the defective product (with freight prepaid) with proof of purchase. Please include $5.00 for return shipping and handling.
This device compries with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.