ULTRA Top Wet Grinder, Multicolour Manual

ULTRA Top Wet Grinder, Multicolour

MIXER GRINDERS
WET GRINDERS
PRESSURE COOKERS

Dear Customer,
We’re delighted to welcome you to the Ultra family of millions of happy customers worldwide.
You’ve made a smart and informed decision to invest in a perfectly made Ultra. Ultra products are inventive and aesthetically superb with a combination of good quality, precision and durability to help prepare the tastiest and healthiest meal.
Ultra assures you of trouble-free performance for years.
However, in the unlikely event of any operational problem, we would be more than happy to assist you.

PRODUCT INFORMATION

S.NO.	Features
1	Form	Table Top
2	Capacity	1.25L
3	Motor Wattage	85 watts
4	Voltage	230V, 50Hz
5	Grinding Stones	Conical
6	Drum	AISI-304 Rust-Resistant Food Grade Stainless Steel
7	Shell	ABS
8	Drum Shape	Cylindrical
9	Multi-Utility Drum	Yes
10	Power Surge Protector	Yes
11	Shock Proof	Yes
12	Stone Assembly weight	1.7 KG
13	Warranty	5 Years
14	Net Weight	8.8 kg
15	Product Dimension (mm)	400 x 230 x 315
16	Drum Size (mm)	ø190 x 175
17	Motor Speed (Rated without Load)	1350 RPM
18	Drum Speed (with Load)	155 – 160 RPM
19	Box Contents	Grinder Unit, User Guide and Batter Cleaner

Recommended Measure and Grinding Time *

Grinding Medium	Load Condition	Measurements before soaking	Soaking Time in Hrs	Water to be added
Rice (Raw / Boiled)	Minimum	106 gms	4	100 ml
Rice (Raw / Boiled)	Maximum	781 gms	4	780 ml
Dhal	Minimum	41 gms	2	80 ml
Dhal	Maximum	195 gms	2	390 ml

1 cup (200 ml) – 180 gms of idly rice
1 cup (200 ml) – 180 gms of black gram
Grinding Instructions
Rice and Dhal should be ground separately.
For better grinding result, do grind rice first and dhal next.
Do not use cut pieces of coconut; instead use only shredded coconut for grinding.
*Results under lab test conditions and may vary with actuals

HOW TO OPERATE YOUR ULTRA DURA TABLE TOP GRINDER

Sequence of Operation

Wash and clean the drum and roller stone assembly
Place the drum on pulley coupler. Gently rotate till the drum fixes itself
Place the roller assembly in the drum in position as indicated above the drum
Close the arm and press gently to lock automatically
Take a cup of water and pour it in to the drum
Press the switch downwards to turn on the grinder
Add the grinding medium in small quantities with adequate water and close the drum with hatch
When required consistency is achieved, switch off the grinder
Remove the hatch, hold the arm and press lock to release, then swing the arm upwards and rest it suitably
Remove the roller stone assembly, place it on the batter cleaner as shown and rotate the stones to wipe down the batter into the drum
Remove the drum and use required amount of batter. Store the rest in your refrigerator

Note: For pulse/cereals, always add in small quantities to ensure even grinding

MAKE YOUR ULTRA DURA WORK LONGER

Make sure you keep your Ultra Wet grinder clean and dry, always
When not in use, disconnect the electric cord from the mains
For best results and trouble-free performance, use Ultra Wet grinder only as specified in this User Guide
Be alert and cautious while operating in the presence of children and physically challenged persons
Always keep your Ultra Wet grinder away from heat sources
Lift the appliance at its base
Clean the drum and roller assembly thoroughly after every use
Ensure that the grinder is in unlocked position while not in use
Keep the wiper position facing the motor while grinding
(Please refer diagram printed on Arm)

Do not run the grinder empty for more than a minute
Do not use any other attachments. Use only those recommended by us
Do not put your hand into the drum while grinding
Do not unlock the arm while in operation
Do not insert sharp objects into the slits. This would damage the parts inside
Do not lubricate any parts with oil/grease
Do not keep the drum upside down after washing
Do not attempt to repair the grinder yourself. If there’s any fault, contact Customer Care

EXPLODED VIEW OF ULTRA DURA

SL. No.	Part Name
1	Base Frame
2	Bottom Shoe
3	Slotted CSK – M5 x 12
4	Cheese Head Screw M4 x 15
5	Cheese Head screw M4 x 20
6	Brg. Hsg Plate
7	Deep Groove Ball Bearing 6202
8	Bearing Spacer
9	Poly ‘V’ Belt – 4PJ745
10	Driven Pulley – (Poly ‘V’)
11	Driven Pulley
12	Hex Socket Grub Screw M5 x 6
13	Washer Gromment ID5.5 x OD17 x T1
14	Gromment Motor Mount
15	Hexagon Nut M4
16	Spring Washer M4
17	MS Washer 4.5 x 12 x 1
18	Motor Mounting Plate
19	Bush – Motor Mounting Plate
20	Hexagon Nut M5
21	Capacitor 5 MFD
22	Ultra Motor 230V, 50Hz, 85W
23	Motor Fan
24	Wago 3 Way Connector Assy.
25	Wire Cord – 230 V
26	Switch -230 V
27	Cheese Head Screw M4 x 15
28	Hexagon Nut M3
29	Cheese Head Screw M4 x 15
30	Ms Washer 4.5 x 12 x 1
31	Cover – Switch Knob
32	Shell Assy
33	Stopper Arm Channel
34	Lock Spring
35	Lock
36	Shell Top Cover
37	Cheese Head Screw M5 x 8
38	Channel Bottom Cover
39	Slotted CSK Head Screw M5 x 8
40	Housing
41	Sleeve
42	Main Spring
43	Arm Channel
44	Hinge with Insert
45	M.S. Washer ID 8.5 x 0D 14.5 x T 0.5
46	Rubber Washer ID 8.5 x 0D 15.5 x T 0.3
47	Disc Spring 12.5 x 6.2 x 0.7
48	SS Hexagon Lock Nut M6
49	Split Pin 1.4 x 15

50	Channel Top Cover
51	Hatch
52	Pin – Hinge
53	Plug Hinge Pin
54	Collar Pad
55	Adaptor
56	Flate Stone
57	Drum
58	Wiper Assy
59	Hexagon Lock Nut M8
60	Roller Lock Screw
61	Taper Roller Assy – I
62	Roller Lock Screw
63	Taper Roller Assy – II

Additional Attachments (Optional)*

Atta Kneader

Coconut Scraper

Visit www.elgiultra.com to watch the demo video

*Attachments have to be purchased separately at additional cost

TROUBLESHOOTING CHART

PROBLEM	REASON	SOLUTION
Grinder does not run	No power supply	Check mains
Grinder does not run	Loose connection of wire cord	Contact Ultra Customer Care
Grinder starts but drum stops suddenly	Overloading of medium	Remove medium and add in small quantities
	Low belt tension	Contact Ultra Customer Care
	Insufﬁcient water	Add water as required
Grinder is noisy	Incorrect wiper position	Check and correct the wiper position as printed on Arm lid
Takes more time to grind	Excess quantity, insufﬁcient soaking time	Reduce quantity or check manual for correct grinding measures
	Incorrect wiper position	Check and correct the wiper position as printed on Arm lid
	Low voltage	Operate at 230 V Ac 50 Hz
	Low belt tension	Contact Ultra Customer Care
Grinder overheating	Motor housing air vents blocked	Use a dry brush to clean air vents
Grinder overheating	External heat source	Keep the grinder away from external heat sources
Vibration	Uneven platform	Place the grinder on stable and horizontal platform
Grinder / Drum smells	Motor burnt	Contact Ultra Customer Care
Grinder / Drum smells	Drum / Roller Holder Assembly not cleaned well	Clean the drum / roller holder assembly
Grinder stops automatically when it is switched on	Faulty switch	Contact Ultra Customer Care
Arm does not lock	Roller assembly not cleaned well	Unscrew roller and clean under running water
Roller not rotating	Roller not cleaned properly after use	Unscrew roller and clean under running water
	Excessive loading/insufﬁcient water	Remove excess medium
	Roller stuck on pin	Unscrew roller pin and clean

In case of abnormal operating conditions, contact Ultra Care Centre

Warranty- Terms and Conditions

Elgi Ultra Industries Limited (hereinafter referred to as “the Company”) guarantees this product for normal home use against defects in materials or workmanship for a period of 5 years from the date of original retail purchase. During the said period, the Company has the option to either repair or replace parts free of charge, if this product is returned personally or sent through prepaid courier to our Ultra Care Centres, along with proof of purchase and guarantee card duly filled in by the retailer.

The decision of the Ultra Care Centres in determining the cause of failure and
repairs required to be carried out will be final and binding under this 5 years warranty and cannot be canvassed either by dealer or the retail purchaser on any ground whatsoever. The warrantor shall not be liable for any transportation cost or any damage due to or during transit of the product either way. Repaired units under warranty will be returned to the customer at his/her risk and on “to pay” freight basis

This Warranty shall NOT apply:

For wear and tear to the product
For grinder hatch
Involvement in an accident
If the product is purchased from any unauthorised source
If repairs or product modifications and/or alterations have been carried out by unauthorised service organisations or persons
If the product is being used for commercial purposes
If the defect is caused by abuse or misuse of the product or by environmental conditions that are not in conformance to the recommended operations of the product
If the defect is caused by its connection to peripherals, additional
equipment or accessories other than those recommended by Ultra
If the warranty card and/or a purchase bill is not produced at the time of repair

In no event will the Company be responsible for any loss or damage, directly by or consequential to, careless, negligent handling or misuse of this product.

This Warranty is expressly in lieu of all other warranties expressed or implied (statutory or otherwise) and of all other obligations or liabilities on the Company’s part. No person, agent, distributor, dealer, service centre or company is authorised to change, modify or extend the terms of this Warranty in any manner whatsoever.

The Company’s liability under this Warranty is restricted to only repair of the
product and does not involve any replacement, monetary payment or damages. Any doubt/disputed claim under this Warranty shall be subject to arbitration by an Arbitrator appointed only by the Company. The arbitration shall be at Coimbatore only

Please Note:

The Warranty is applicable only for purchase made through authorised dealers in the country of purchase
The above Warranty is applicable only for materials/components and not for service/labour charges incurred in rectification/repair

CHARGES APPLICABLE

Service Period	Spares	Service charges (Ultra service centre/doorstep)	Doorstep visiting charges
Up to 1 year within warranty	Free	Free	Free
After 1 year within warranty	Free	Free	`100
Out of warranty	At Cost	`250	`100

Above charges are applicable only in India and is subject to change without any prior notice. Please check with Ultra Customer Care for prevailing charges.
Doorstep service is applicable only in India.

FOR YOUR KIND ATTENTION

Please read all instructions and warning before using this product. Keep this user guide, sales receipt and warranty for future reference and use.
In case of any mechanical faults, call Ultra Customer Care. Do not attempt to repair it yourself
This user guide provides important information on proper operation and maintenance. Every effort has been made to provide the details with as much accuracy as possible. We reserve the right to change or upgrade the product or any part thereof without prior notice.
The instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur. We urge you to exercise common sense, caution and care when setting or using this product.
When unpacking check to make sure all parts listed is included. If you find anything missing or broken or damaged, kindly call Customer Service.
The design, specifications and price are subject to change without prior notice.

/ultraappliancess

/ultraappliances

/ultra_appliances

The Ultra social media broadcasts are full of recipes and tips on healthy, delicious food. From daily updates to interesting engagements on special days, our content is something you mustn’t miss. What’s more, there are also lots of contests and exciting prizes to look forward to!