USER GUIDE
Indy Evo Series
Download the Skullcandy App
Download the Skullcandy App
Auto Pairing Mode
Pairing Mode
Mode Coupling
Power – on
Power – off
Charge Earbuds
Charge Case
Pairing Mode
Pair New Device
Power – on
on/off
Power – on
on/off
Play Purse
Track Froward
TrackBack
Volume Up Volume +
Volume Dowen
Volume-
Answered
Activate Voice Assistant AthateVoiceAssistant Left Side or Right Side
Actver assistant vocal
3 EQ Modes
Music, Movies, and Podcast
Change equator modes
Ambient mode
Find With Tile’ Both Earbuds *Tile App Required
Par Totem
Associer
Clear Paired Device Both Earbuds
*While On *Bluetooth Disconnected
Reset Device
Re-Sync Earbuds Both Earbuds
*While On *Bluetooth Disconnected
Re-sync eartuis file
Questions Visit: www.skullcandy.com
Americas
Skullcandy, Inc.
6301 N Landmark Dr. Park City,
UT 84098 U.S.A. Skullcandy.com
Speaker Driver: 6mm, Impedance: 16 Ohms, THD <3%©1KHZ, Voltage Regulation: 5V, Bluetoothe 5.2, Frequency Band: 2402MHz- 2480MHz, Maximum Power: <gdem, Weight: 57g.
Skullcandy and other marks are registered trademarks of Skullcandy, Inc. All rights
Maximum operating temperature 45°C. . ,
Risk of explosion if the battery is replaced by incorrect type disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. explosion or the leakage of flammable liquid or gas.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statement This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
ISED SAR Compliance Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End-user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is reported under this standard during product certification for use when properly worn on the head.
Warning: To avoid hearing damage, do not listen at high volume level.
1 YEAR GLOBAL WARRANTY
1 Year Global Limited Warranty
The United States of America and Canada Product Purchases Only Sial! candy products are backed by a 1-year limited warranty. If it doesn’t work the way we promised, we’ll make it right. For Guarantee Claims. Questions and Terms & Conditions visit www.Skullcandy.00m/warranty or call us at 1-888-MY SKULL
Product Purchases Outside The United States of America and Canada Skullcandy products are backed by a 1-year limited warranty. If it doesn’t work the way we Promised, we’ll make it right. For Guarantee Cairns, Questions, and Tarns & Conditions visit www.Skullcandy.core warranty or email us at help-eue1Aullcanc/y.com
SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Skullcandy Internation GmbH declares that the radio equipment type [Model: S2IVVV] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: Skullcandy.eu/product-documents 
Contains a Li-ion battery. The battery must be EN Made in China. recycled or disposed of properly. .
Hardware Version: (Earbuds) V03 (Charge Case) V02 Software Version: (Earbuds) FW132 (Charge Case) FW V006
Indy Evo IndyXT Evo
MODEL : S1IVW S1IVWL FCC ID : Y22-S1IVW IC : 10486A-S1IVW
