User Manual
True Wireless Earbuds
Thank you for purchasing the Odec OD-E2 True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.
Package Contents
True Wireless Earbuds
Charging Case
Three Pairs of Ear-Tips (S / M / L)
USB-A to C Cable
User Manual
Warranty Card
Product Diagram
Specifications
Earbuds
| Model | OD-E2 |
| Technology | BT5, A2DP, AVRCP, HFP |
| Driver (each channel) | 1 x 12mm / 0.24” speaker driver |
| Sensitivity | 105dB ±3dB SPL (at 1KHz/1mW) |
| Frequency Range | 20Hz – 20kHz |
| Impedance | 32 ohm ±15% |
| Microphone Type | MEMS MIC (microphone chip) |
| Microphone Sensitivity | -38dB ±1dB (at 1kHz) |
| Microphone Frequency Range | 200Hz – 8kHz |
| Charging Time | 80minutes |
| Battery Type | Li-polymer (2 x 40mAh) |
| Operating Range | 10m / 33ft |
| IP Rating | IPX5 |
| Weight | 8.7g / 0.3oz (pair) |
Charging Case
| Charging Input | DC 5V |
| Charging Time | 1.5 hours |
| Battery Type | Li-polymer (450mAh) |
| Weight | 33.6g /1.2oz |
Getting Started
Charging
Fully charge the charging case before first use. To charge, connect the case to a USB charger or charging port with the included USB-A to C cable. When the LED battery level indicator lights are solid white, the case is fully charged. Charging takes around 1.5 hours. The earbuds should be stored in the case when not in use.
Turning On / Off
| Turn On | Remove both earbuds from the charging case, or touch and hold on to the touch-sensitive panels on both earbuds for 5 seconds when they are turned off |
| Turn Off | Return both earbuds to the charging case, or hold on to the touch-sensitive panels on both earbuds for 5 seconds |
| Disconnected | Quadruple-tap the touch-sensitive panel on either earbud to disconnect the connected device |
Pairing
Starting with the earbuds in the case:
- Take the left and right earbuds out of the case. They will turn on automatically.
Please pair within 5 mins, if not it will turn off automatically - Turn on the pairing function on the device you want to pair with the earbuds
- From the list of available devices, find and select “ODEC OD-E2”
Regular Use After Pairing
Once the earbuds are successfully paired with your device, they can be switched on and off as follows:
- Take the earbuds out of the charging case, and they will turn on and connect automatically
- To power off, put the earbuds back in the charging case, and they will begin charging
Using the Left/Right Earbud Only
Starting with the earbuds in the case:
- Take the left/right earbud out
- Turn on the pairing function on the device you want to pair with the earbud
- From the list of available devices, find and select “ODEC OD-E2”
Notes
- When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found
- In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired
- If one of the earbuds has no sound output, put both earbuds back in the charging case and take them out again
- The wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be
re-established if you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last paired device. To connect with other devices, repeat the previous pairing steps
Controls and LED Indicators
Streaming Audio
Once paired, you can wirelessly stream audio from your device to the earbuds.
Music will automatically pause when you receive an incoming phone call and resume once the call has ended.
| Play or pause | Double-tap the touch-sensitive panel on either earbud |
| Skip to the next track | Triple-tap the touch-sensitive panel on the right earbud |
| Skip to the previous track | Triple-tap the touch-sensitive panel on the left earbud |
| Volume up | Tap the touch-sensitive panel on the right earbud |
| Volume down | Tap the touch-sensitive panel on the left earbud |
| Check the remaining battery | Short press the indicator switch |
Taking Calls
| Answer a call | Double-tap touch-sensitive panel on either earbud |
| End a call | Double-tap the touch-sensitive panel on either earbud |
| Reject an incoming call | Long press the touch-sensitive panel on either earbud |
| Use Siri or other voice assistants | Long press the touch-sensitive panel on either earbud |
| LED Charging Indicator | Status |
| Orange light | Earbuds charging |
| Off (after charging) | Earbuds fully charged |
| LED Battery Level Indicator | Status |
| Flashing white | Case charging |
| Solid white | Case fully charged |
FAQ
The earbuds are on, but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.
I’ve connected the earbuds with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before
the audio can be transmitted. If you’re using a music player or other device, please make sure it supports the A2DP profile.
The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range-related
issues.
What’s the wireless range of the earbuds?
The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.
The earbuds won’t turn on
Try charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address given in ‘Warranty & Customer Support.’
I put the earbuds back in the charging case, but the earbuds are still connected
The charging case is probably out of power. Try charging it.
Product Care and Use
Keep away from liquids and extreme heat
Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss
Warranty and Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and
product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
*Please note, Odec can only provide after-sales service for products purchased directly from Odec. If you have purchased from a different seller, please contact them directly for service or warranty issues.
CE Statement
Max RF power level:
BT classic (2402–2480MHz): 2.1dBm
RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Hereby, our company declares that the radio equipment type (True Wireless
Earbuds, OD-E2) complies with Directive 2014/53/EU.
Notice: This device may be used in each member state of the EU