FLIK ME Baby – Give The Bird and Wave to Other Drivers, Hottest Gifted
Specifications
- ITEM WEIGHT: 6.4 ounces
- PACKAGE DIMENSIONS: 6.8 x 6 x 1.3 inches
- BRAND: Flik
- BATTERIES: 3AA
Flik is a device for fun. It is stickered on the backside of the car to wave to other drivers. It has an automatic brightness adjustment. During the day, the FLIK is brilliant, and at night, it is dim. The FLIK is allowed in most U.S. states due to its amber yellow color and non-flashing lights. The brightness of the Flik light is automatically adjusted dependent on the brightness outside. The Flik shines brightly during the day. The Flik is DIM at night, so you won’t be a distraction. When the wireless remote is pressed, the light turns on for 4 seconds. The Flik has been set to last 3 – 3.5 MONTHS without requiring battery replacement. It has a RF remote control. The FLIK’s RF remote is FCC certified and has a range of 45 feet. It is Easy to Mount. Use the provided adhesive Velcro strips to quickly and securely fix the FLIK and its remote.
What’s in the box
- FLIK Hand Unit (batteries not included)
- Remote (batteries included)
- 3M Velcro Adhesive Strips
How to use
- Remove Flik from package.
- Add 3 AA batteries.
- Close double latched door.
- Now press the remote to ON the sign.
- You can toggle between gestures.
- Now remove the sticker from the backside of the sign and stick it where you want.
Frequently Asled Questions
- What happens if the remote’s battery dies? How
On the back of the remote, there is a little hole. To open the remote, use a pin to push through the hole. - Is it water-resistant? It’s something I’d like to put on my motorcycle.
The Flik isn’t water resistant. - Is it necessary to turn it on and off every time you get in and out of your vehicle?
No, the Flik was supposed to last 3 to 3.5 months on a single set of batteries. You don’t need to turn it on or off; simply put the batteries in and you’re ready to go for the next few months! Design-wise, this was an extremely difficult task to do. - How many volts are there?
I’d like to hardwire it so that I don’t have to worry about replacing the batteries. Also, for the remote voltage, I wouldn’t go higher than 4.5v to the Flik. If at all possible, keep the voltage between 3.5 and 4.5 volts. - Will it function at night with a 5% tint?
I have two coats of 5% over a layer of 20%, and it looks fantastic! - What is the best way to use the wave function?
The remote control has two buttons: one for giving the middle finger and the other for waving. To use the wave function, press the wave symbol on the button. - Hey, how do you get rid of glass?
Velcro adhesive strips secure the Flik to the glass. For easy removal and reattachment, pull the Flik away from the Velcro strip (leaving one strip attached to the glass). - Will the signal reach from the driver’s seat to the back glass if I go on a trip?
Without a doubt! The RF remote eliminates the need to aim the remote directly at the Flik device, and it has a 45-foot range. - How did it manage to stick to the window?
It comes with Velcro strips that are self-adhesive. You may remove it and put it back on (the Velcro strips stay on the glass. - Will it fit on a soft-top Jeep Wrangler?
It’s covered in two strips of 3M tape. I believe it would adhere to the plastic on the soft top. It’s not as good as glass, but it’s good enough to hold. - Do you intend to make it in red or white?
No, we are unable to use any additional colors because they are prohibited in practically all states. The only color that complies with state traffic standards is amber yellow.