StarTech com XXMXX-PRIVACY-SCREEN Privacy Screen for MacBook Pro 2021 Manual

XXMXX-PRIVACY-SCREEN Privacy Screen for MacBook Pro 2021

Product Information: Privacy Screen for MacBook Pro 2021

This privacy screen is designed for use with MacBook Pro 2021.
The product ID for this privacy screen is XXMXX-PRIVACY-SCREEN. The
package contents include a privacy filter, wiping cloth, adhesive
strips, and user manual. The privacy filter is available in both
matte and glossy finishes and comes with a camera notch. This
product is backed by a two-year warranty.

Product Usage Instructions:

1. Clean the screen and bezels of your MacBook Pro 2021 using the
   wiping cloth provided in the package.
2. Select the side of the privacy filter that is intended to face
   outward (matte or glossy). Place the privacy filter on a clean and
   flat surface with the selected side facing down.
3. Remove all adhesive strips from the transparent lining.
4. Carefully align the adhesive strips along the top, bottom,
   left, and right edges of the privacy filter. Apply firm pressure to
   affix them to the privacy filter.
5. Carefully remove the protective backing from the adhesive
   strips.
6. Attach the privacy filter to the screen, starting from the
   bottom and working towards the top. The adhesive side should face
   towards the screen.
7. Apply gentle pressure on the locations where the adhesive
   strips were installed.
8. Clean any fingerprints on the privacy filter using the wiping
   cloth provided in the package.

Note: The adhesive strips become less effective with frequent
removal/reapplication.

View Fullscreen

Quick-Start Guide

Privacy Screen for MacBook Pro 2021

Product ID

XXMXX-PRIVACY-SCREEN

3

1 2

Install the Privacy Filter
1. Clean the Screen and Bezels using the Wiping Cloth.
2. Select the side of the Privacy Filter intended to Face Outward (i.e. matte or glossy). Place the Privacy Filter on a clean and flat surface with the selected side Facing Down.
3. Remove all Adhesive Strips from the Transparent Lining.

Component 1 Privacy Filter

*Product may vary from image
Function
· Privacy effect when viewing the screen at angles greater than 30° off-center from the Left or Right
· The total Field of View is 60 degrees

4. Carefully align the Adhesive Strips along the Top, Bottom, Left, and Right edges of the Privacy Filter. Apply Firm Pressure to affix them to the Privacy Filter.

2

Adhesive Strips (Not Shown)

· Secure the Privacy Filter to the Screen surface
Note: The Adhesive Strips become less effective with frequent removal/reapplication

3 Camera Notch

· Prevents obscuring the built-in camera

Package Contents

· Privacy Screen x 1 · Set of Adhesive Strips x 1 · Sleeve x 1 · Wiping Cloth x 1 · Quick-Start Guide x 1

5. Carefully remove the Protective Backing from the Adhesive Strips

Requirements
For the latest mTaonvuiaelws, pmraonduuactlsi,nFfoArQmsa, tviiodne,otes,cdhrniivcearlss,pdeocwifincalotiaodnss,,taencdhndieccalladrartaiwoninsgs, and more, visit www.startech.com/support. of conformance, please visit: www.startech.com/support
6. Attach the Privacy Filter to the Screen, starting from the Bottom and working towards the Top. The Adhesive Side should face toward the Screen.

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: April 3, 2023 11:58 AM

7. Apply Gentle Pressure on the Locations where the Adhesive Strips were installed. 8. Clean any fingerprints on the Privacy Filter using the Wiping Cloth.

FR

Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Ltd.
45 Artisans Crescent London, Ontario N5V 5E9 Canada

StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom

StarTech.com Ltd.
Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp