Haylou-GT1
TWS BT Earphones
User Manual
Overview
Charging Case
What’s in the Box BT earphones, charging case, EarTips X 2 pairs, user manual, charging cable
Earphones
Medium EarTips have been assembled in advance. However, you may try large or small ones, if the medium ones do not fit you well.
When calling, adjust Mic towards mouth to gain clear calling
Power-on
Take out earphones from the case to power on them. Or touch both panels for 1.5s to power on earphones ( LED glows solid white) when they are not in the case.
Power-off
Put earphones into the case to power off them.
Or touch both panels for 4.5s to power off earphones ( LED glows solid red for 2s ).
Ignore Call
Touch the panel is to ignore the incoming calls.
Stereo Mode
Auto pairing: take out both EarBuds from the case and they will auto pair with each other in 2 or 3s. Earphones will be connectable to cellphones when the LED on right EarBud blinks white slowly. On a cellphone, search for “Haylou-GTLR” and tap to connect.
If earphones fail to be connected to a cellphone, please put EarBuds back to the case and repeat the above steps. Earphones will auto-reconnect to the last device in connectivity records if any.
Note: earphones have been set to the factory when shipping out.
Manual pairing: manually power on two EarBuds and they will auto pair with each other when LED blinks white promptly. Then LED on the right EarBud will blink white slowly and now you can tap it on your cellphone to connect.
Mono Mode
Auto pairing: take out one EarBud from the case to power on it. Its LED will soon blink slowly then search for Haylou-GT1 R/L on cellphone and tap to connect. EarBud will auto-reconnect to the last device in connectivity records if any. Note: it may take more time for the left EarBud to reconnect.
Manual pairing: manually power on one EarBud. Its LED will soon blink white slowly then search for it on cellphone and tap to connect.
How to Charge
Prior to using, please peel off sticker on the pogo pins and top up the earphones
Play/pause
When standby, touch the panel to pause/play music. Note: media player should run in the background.
Voice Assistant
When standby, triple touch the panel to activate the voice assistant.
Note: device needs to support voice assistant and fast awakening be turned on.
Answer/End Cali
Double touch the panel to answer an incoming call and double touch the panel again to end it.
Skip Track Forward/backward
Touch the panel on the right earbud twice to skip track forward
Touch the panel on the left earbud twice to skip track backward
Three-way Calling and Switch
Touch the panel twice to answer incoming calls from the phone. if another call is coming in sync, touch the panel to put the first call on hold while activating the second one. Double touch the panel to switch between an active call and held call.
Switch Audio Output
When calling,touch the panel for is to switch the audio output between earphones and cellphones.
Factory Setting
If earphones do not function well, please refer to the following steps to reset the factory: take EarBuds out from the case. Power off the earphones then touch both panels for about 15s ( LED will blink red and white three times twice). After that, put them back to the case. Delete connectivity record on the cellphone before processing another pairing All connectivity records relating to the EarBuds will all be removed )
Basic Parameters
Operation range: 10m(with no obstacle) Battery capacity: 43mAh(single EarBud) Charging time: approx. 1.5hr
Calling time: approx. 3.5hr
Standby time: approx. 150hr
Input parameter: 5V= 100mA
Battery Type: Li-ion
Wireless connection: BT 5.0
Charging case
Input parameter:5V= 500mA Output parameter:5V— 150mA Charging time: approx. 2hr
Standby time: approx. 4 months Battery capacity: 310mAh
Battery Type: Li-ion
Caveats
- Never disassemble or modify your headset for any reason to avoid any damages and danger.
- Do not store the headset in extreme temperatures (under 0°C or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use this headset during a thunderstorm to avoid irregular function and increased risk of
- Do not use harsh chemicals or strong detergents to clean the headset.
- Keep the headset dry.
Warranty Card
Warranty Period 12 months after the next day receiving this item.
Free exchange service will not be accessed under the following circumstances:
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by an act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
Tips
- Before using the headset, please read the manual carefully and keep it for future references.
- The headset needs to be fully charged prior to first-time use.
- If the headset is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by a qualified manufacturer.
- If the headset cannot be found by you. phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.
Address: Suite 1303,1305 and 1306,13/F, Project Phrase 2 of Gaosheng Tech Tower, Gaosheng Tech Park, No.5 Longxi Road, Zhouxi Community, Nancheng District, Dongguan City, Guangdong, China.
Manufacturer: Dongguan Liesheng Electronic Co., Ltd.
Web: www.haylou.com
Perform standard: Q/LS 1-2018
Made In China
Hazardous substances and their contents in the item 5
| Part Name | Hazardous Substances | |||||
| (Pb) | (Hg) | (Cd) | (Cr(VI)) | (PBB) | (PBDE) | |
| vain body | X | 0 | 0 | 0 | 0 | 0 |
| Battery | 0 | 0 | 0 | 0 | 0 | 0 |
| Ear tips | 0 | 0 | 0 | 0 | 0 | 0 |
| Accessories | 0 | 0 | 0 | 0 | 0 | 0 |
| Charging cable | X | O | 0 | 0 | 0 | 0 |
| This form is made by 5.1/T 11364 regulation. 0: means that hazardous substance content in the homogeneous materials of this part is within the limits of GB/T 26572 regulation. X: means that hazardous substance content in, at least, one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation. |
||||||
Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time. 
