![Miroir M190 Mini Pro Projector Manual Image](https://itsmanual.com/wp-content/uploads/2023/07/0-298-300x147-1.webp)
Miroir M190 Mini Pro Projector
QUICK SET-UP GUIDE
© 2021 Miroir USA, LLC. All rights reserved. Miroir and the Miroir logo are owned by Miroir USA, LLC. All other trademarks are the property of their respective owners. Miroir USA, LLC assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
Your Miroir Mini Pro Projector
Battery Indicator Lights – Lights flash in turn as the device charges. The battery is fully charged when all the lights illuminate and no longer flash.
Projection Lens – Turns power on.
Audio Out (3.5mm) – (Optional) Connect an external speaker or headphones.
HDMI Video Input – Connect an HDMI cable to a device that supports HDMI video output.
USB Power Output – Connect a USB power cable to provide power to a HDMI streaming stick or to charge a smartphone battery. Cannot be used for video input.
USB-C Video/Charge Input – Connect any compatible USB-C charge/ video cable to a device that supports USB-C video output, or power adapter that supports charging. (not included)
Reset Button – Press to reset projector.
Power Port – Connect included AC Adapter/Charger for power. Fully charge battery before the first use (approx. 4-5 hours).
Mode Button – Press mode button to change from HDMI to USB–C video.
Controls – Increase/decrease the volume output of the projector.
Press +/- together to change from ECO to Normal mode.
Normal mode is maximum brightness but shorter battery life.
Focus Controls – Turn wheel to adjust focus.
Rubber Foot Pads – Provides stability and proper airflow to cooling vents.
Cooling Vent – IMPORTANT: Do not cover or block airflow to the vent.
Kick Stand – Kick Stand out to elevate front.
Troubleshooting
The image is blurry
- Adjust the projected image’s focus by rolling the focus wheel forwards or backwards.
- Check that the surface you are projecting on is smooth and non-reflective.
- Check that the projector’s lens is clean and free of debris.
The image is not square
- Check that the projector’s lens is parallel to your projection surface and that your projection surface is flat.
No sound
- Check the volume control on your source device to ensure the volume is turned up.
- Check the volume control on the projector to ensure the volume is turned up.
- If you are using an adapter, verify that the adapter supports audio.
- Check that the HDMI cable is fully plugged into the HDMI port.
No Signal Message
- Check that you are using the required cable and/or adapter.
- If you are using a digital AV adapter, check that the adapter is an authentic Apple adapter and is compatible with your model phone or tablet.
- If you are connecting via USB-C, check that you are using the USB-C video cable that came with the projector – this cable is labeled “USB-C Video Connector.” Some USB-C cables do not support video.
- If you are connected to a laptop or computer, check your computer display settings to ensure a multiple display option is selected (such as “duplicate these displays”).
- Check that your source device supports HDMI video out or USB-C video out.
Projector will not power on, or stay powered on
- Check the battery life of the projector by briefly pressing the power button on the projector. If one or fewer lights illuminate, charge the battery with the USB-C cable or power adapter.
- Check that you are plugging the USB-C cable into the USB-C power Input port and not the USB-C Video input port on the projector.
www.miroirusa.com
MICRO190.07.26.2021