ASSEMBLY INSTRUCTIONS
SKU: DLT
175 Southbelt Industrial Dr Houston, TX 77047
Email: [email protected]
| Description : DUBLIN ROUND TABLE WITH 2 DROP LEAVES | NW: 28.6 LBS |
| Dimension : Ф42”x29”1/2.H | GW: 31 LBS |
| Cube Size (TOP) : 44”x26.7”x3.1” | NW: 12.1 LBS |
| Cube Size (PEDESTAL) : 25.5”x9”x6” | GW: 14 LBS |
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully.
DUBLIN ROUND TABLE WITH 2 DROP LEAVES
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
– Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
– Remove all wrapping material, including staples & packing straps before you start to assemble.
– DO NOT tighten all screws and bolts until completely assembled.
– Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
| NO | Description | Qty | Sketch | NO | Description | Qty | Sketch |
| A | Top | 1 |  |
B | Leg | 4 |  |
| C | Pedestal | 1 |  |
D | Mounting plate | 1 |  |
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware:
| NO | Description | Qty | Sketch | NO | Description | Qty | Sketch |
| 1 | Large flat washer (Bag 2) (Ф8.5xФ19mm) |
4 |  |
2 | Large lock washer (Bag 2) (Ф8.5xФ11mm) |
4 |  |
| 3 | Hexagon nut (bag 2) (M8x13mm) |
4 |  |
4 | Wrench (Bag 2) (M13mm) |
1 |  |
| 5 | Small flat washer (bag 2) (Ф6.5xФ13mm) |
4 |  |
6 | Small lock washer (Bag 2) (Ф6.5xФ9mm) |
12 |  |
| 7 | Bolt (Bag 2) (M6x48mm) |
12 |  |
8 | Medium flat washer (Bag 2) (Ф6.5xФ16mm) |
8 |  |
| 9 | Allen key (Bag 2) (M4) |
1 |  |
10 | Screw M3.5×20 (Bag 1) |
4 |  |
| 11 | Plastic (Bag 1) |
2 |  |
STEP1
Attach legs (B) to the pedestal (C) with washers (1), (2) and nuts (3). Tighten with wrench (4).
DUBLIN ROUND TABLE WITH 2 DROP LEAVES
STEP 2
Put the Mounting plate (D) on top of the pedestal, and attach with bolts (7), washers (5), (6). Tighten with Allen key (9).
STEP 3 .
Please remove Hardware Bag 1 as shown below
DUBLIN ROUND TABLE WITH 2 DROP LEAVES
STEP 4
Attach plastic(11) to the top (A). use the screwdriver to tighten the screws (10) as shown below.
STEP 5
Carefully place the frame (from Step 2) on the bottom side of the tabletop (A), with bolts (7), washers (8), (6). Tighten with Allen key (9).
DUBLIN ROUND TABLE WITH 2 DROP LEAVES