DM100
Personal Monitor Amplifier
OWNER’S MANUAL
By Vangoa
Function Description
- IN PUT 1
Connecting musical instruments such as electronic drums or keyboards. - INPUT 2
Connecting musical instruments such as electronic drums or keyboards. - INPUT 1 VOLUME
This knob adjusts the volume of channel one. - INPUT 2 VOLUME
This knob adjusts the volume of channel two. - LOW
Adjust the amount of low-frequency level. - MID
Adjust the amount of mid-frequency level. - HIGH
Adjust the amount of high-frequency level. - BLU ETO 0 TH /USB AD JU STM ENT SW ITCH
Long press: to turn on/off Bluetooth;
Click: to start/pause Bluetooth or USB song playback;
Left/Right Rotary Click: Used to switch the top/next song in Bluetooth or USB;
Continuous left/right rotation: Used to attenuate/boost the audio signal in Bluetooth or USB. - BLUETOOTH /USB ND EDITOR
Shows whether Bluetooth/USB works. - USB INPUT
Insert U disk, play MP3 music. - D . I OUT
This socket provides a balanced low impedance output signal from the preamplifier taken before the Volume but after any tone correction, used for direct injection of amplifier signal to a mixing desk or additional power amplifier. - POWER INDICATOR
Indicator lights when power on. - POWER SWITCH
Switch ON/OFF the machine.
- AC INLET SOCKET
Connect the included AC power cable to this inlet.
SPECIFICATION
Bluetooth and USB
Power Output: 100W RMS
Input Power: 100W, 50HZ/60HZ,110V/220V
Impendence
INPUT 1: 68k ohm
INPUT 2: 68k ohm
EQ
LOW: +/- 15dB@60Hz
MID: +/- 15dB@1 kHz
HIGH : +/- 15dB@10kHz
Speaker: Coaxial (10 inch woof + 1 inch tweeter)
Dimensions: 410mm*360mm*340mm (H*W*D)
Net Weight: 13KG
Gross Weight: 15 KG
WARNING!-IMPORTANT SAFETY INSTRUCTIONS
BEFORE CONNECTING, READ INSTRUCTIONS
- Use only the supplied power supply or power cord. If you are not sure of the type of power available, consult your dealer or local power company.
- Never break off the ground pin on the power supply cord.
- Never attempt to bypass the fuses or fit ones of the incorrect value.
- Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Do not allow liquids of any kinds water, soft, drinks, etc. to penetrate the unit. Never place objects filled with liquids, such as vases or glasses on the DM100 this can cause electric shock. Do not place naked flame sources, such as lighted candles, on the DM100 as this can cause fire.
- The power supply cord should be unplugged when the unit is to be unused for long periods of
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and at the point where they exit from the apparatus.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS!
Thank you for selecting the DM100 personal monitor amplifier? Please take the time to read this manual carefully to get the most out of the unit. We recommend that you keep the manual at hand for future reference.