BQobarsca Mobile Intelligent Terminal WinCE Manual

BQobarsca Mobile Intelligent Terminal WinCE Instruction Manual

Introduction to S50 Series Products

Overview

S50 product is an industrial hand-held terminal independently researched and developed, designed and produced according to the industrial characteristics. Its appearance is adopt the ergonomic design, with the light, flexible, anti-vibration and anti-dropping features, as well as long standby time and stable operating system. S50 product is in accordance with IP65 industrial standards for water-proofing, dust-proofing, anti-dropping, anti-static and high & low temperature resistance design.

Applicable industries

It is mainly applicable for warehouse, channel, logistic, drug supervision,retail industry and other fields.

Product parameters

Performance parameters
Operating system	Microsoft Windows CE 6.0
Processor	806MHz/1GHz
Memory	256M RAM +256M ROM/512M RAM +512M ROM

Physical parameters
Display screen	3.5* 240×320 TFT color touch screen
Dimensions	L 179.5 x W 78.18 x T 31.02mm
Weight	370g (including standard battery)
battery	Unloadable 3.7V 3800mAH, 10 hours, Above 200 hours standby
Camera	5 mega pixels
Keyboard	26 regular keys, 1 power key, 1 reset key, 2 sides keys
Interface	1 Mini USB 2.0, 1 MicroSD/TF slot, 1 SIM slot (optional), 1 charging interface, 3.5mm stereo headphone jack
Power Adapter	Input: AC 100-220V 50/60HZ; Output DC 2.5A
Input method	English, handwriting input
Audio (optional)	Loudspeaker, headphones
Way of notification	Speaker, indicator light and vibration

Environmental parameters
Temperature	-20°C-50°C (Working) -30°C -60°C (Storage)
Electrostatic	±15kV Air, ±8kV Contact
Relative humidity	5%-95%RH
Protection grade	IP65
Anti-dropping height	Bear the impact of dropping to smooth cement ground height from the height of 2.5m for many times
Anti-rolling strength	Almost 1000 times for rolling within the scope of 1m strength (impact force)

Data communication parameters
WIFI	IEEE 802.11 a/b/g/n
Bluetooth	Bluetooth 2.1
WWAN	GPRS/EVDO/TD-SCDMA/WCDMA
Decoding ability	1D laser /2D image scan engine
	Scanning precision: ≥. 3mi1
	Depth of field: 3cm-70cm (Depends on barcode density and type)
	UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc PDF417: MicroPDF417, Composite, RSS, TLC-39, Data matrix, QR code, Micro QR code, Aztec, Postal Codes: US PostNet US Planet UK Postal, Japan Postal, Dutch Postal (KDQ, etc

Product Appearance

Appearance view

Front view

Side view

Back view

Top view

PDA Configuration Instructions

introduce the software function of s50 series devices in detail.

PDA Desktop

The terminal will be turned o by press the power button for 3 to 5 second, the following interface will be displayed.

Three indicating lights in the top right corner, the one in the leftmost will light after turn on the device, the middle one will turn to red when charging the device, and turn to green after the battery is fully charged. For example, the red marker box in the above picture displays battery level and signal strength. Battery level indicate: Normal above 30%; insufficient 10%-30%; low power less than 10%.

Note: We should charge at once at low power, please turn off the terminal if you can’ t charge it immediately.

WIFI

Turn on/off the Wi-Fi module: Enable whether Wi-Fi module turn on when device power on.

An icon will appear in the taskbar after turn on Wi-Fi module.
If ‘Auto Run’ is selected, the Wi-Fi module will be turn on automatically when device power on.

3G and GPRS Test

AT instruction test is usually used in 3G or GPRS module dial test.

Obtain current signal value.
If the option ‘Power module after power on device’ is selected, the current 3G or GPRS module will be turn on automatically in the boot process.
(Note: Don’ t dial-up and connect to Internet automatically.)

Bluetooth

Open or close Bluetooth.
The bluetooth icon will appear in the taskbar after turn on bluetooth.
Double click the icon in the taskbar, the Bluetooth configuration interface will be activated.
Click the icon in Bluetooth configuration interface, the window will be minimized to taskbar.
Click ‘close’ turn off Bluetooth, the icon in the taskbar will disappear.

Camera

Turn on/off camera.

‘Photo OK’ : focus and take pictures.
‘View F3’ : Preview the photos.
‘Set F1’ : Set the path to save photos, open/close flashlight (closed in default), brightness and resolution ratio, etc.
‘Exit R’ : Close the camera.

1D Scan Engine

Open/close and set various parameter of 1D scan engine.

‘Open Scanner’ : Turn on scan engine.
‘Advance’ : Set the code type and method of outputting barcode data information.
‘Initialization’ : Restore factory setting of the scan engine.

Note: When you click ‘Open Scanner‘ , and choose option Clipboard’ , the barcode data information will output in where the cursor displaying when you exit the program.

If we want to call API in the program to output barcode data information, we have to click icon Close Scanner’ to turn off scan engine, other wise it will have a impact on the program output barcode data information.

2D Scan Engine

Open/close and set various parameter of 2D scan engine.

‘Open Scanner’ : Turn on scan engine.
‘Advance’ ,the default password is 87651234:Set the code type and method of output 2D barcode data information.

Note: When you click ‘Open Scanner’ , and choose option ‘Clipboard’ , the barcode data information will output in where the cursor displaying when you exit the program.

If we want to call API in the program to output barcode data information, we have to click icon ‘Close Scanner’ to turn off scan engine, other wise it will have a impact on the program output barcode data information.

USB

Set data synchronization or USB disc loading.

Synchronization: Install software Microsoft ActiveSync in the PC, and icon will appear in PC taskbar after the device connect with PC via USB cable, and then the data can be updated.
USB disk mode : TF card as USB disk.
Configuration method:
Step 1: Disconnect USB cable, and reboot PDA.
Step 2: Enter the USB configuration interface, choose relevant mode.
Step 3: Reboot PDA.

Screen Setting

Set the brightness and calibration of the screen

Adjust the brightness through shift the scroll bar
Press the center of ‘+’ ,and click icon ‘OK’ to save the brightness configuration after finish the setting.

Sound

Set the volume and sounds

Adjust the volume through shift the scroll bar.
Set the sound for the system.

Sleep Setting

Set sleep and wake up parameter of the system.

‘Auto close screen‘ : The screen will close automatically when the system is in idle status,and the time interval reaches.
‘System sleep‘ :The device will enter into system sleep when the system is in
idle status,and the time interval reaches,at this point, the system is working in low power consumption,and most of the hardware are in standby status.
‘Allow power key open/ close the screen‘ :If this choice is selected, the screen will be closed/opened by pressing the power button of the device.
‘Not allowed to sleep when synchronous’ : If this choice is selected,the system will not enter into sleep status when synchronizing data by plugging in USS cable.
‘Allow any keyboard to wake up system’ :If the choice is selected,any button”
can wake up the system when the system is in close status or dormancy, or only the power button can wake up the system.

Modular Setting

Turn on/off of each hardware modular in PDA.

WIFI:Turn on /off W IFl modular, WIFI Manager icon will appear in the taskbar after turn on.
GSM/3G :Turn on /off GSM Modular or 3G Modular.
1D scan engine: Turn on /off 1D scan engine.
2D scan engine:Turn on /off 2D scan engine.

Auto Run

Set the application programs and shortcuts of Auto Run.

‘Desktop shortcut’ :Set up shortcut in the desktop.
‘Program shortcut’ : Set up shortcut in the main menu.
‘Remove shortcut’ :Remove all shortcuts set in A and B.
‘Set App Auto Run’ : Set application program auto run,which will run automatically after device power on.
‘Remove Auto Run’ : Cancel auto run software set in D.
‘App Management’ :The administrator set related application program r to users.

App Management: The default password is 87651234.

‘Add‘ : Add application program to the option ‘App management’
‘Delete‘ :Delete application program to the option ‘App management’
‘Change Password’ : Change the password for the App Management.
‘Show TaskBar’ : Show or hide TaskBar.
‘Auto Run’ :Set whether turn on the App Management when power on the device.
‘Exit’ : Exit App Management configuration interface.

Input Method

System Information

Display all information of the current device.

Restore Factory Default Setting

Restore Factory default setting (Note: All data in the device will be deleted, please operate carefully, this function is used under the circumstance of abnormal condition in the device,and problem can’ t be solved in normal method ).
The default password for Restore Factory Setting is 87651234.

Troubleshooting

How to set WIFI Network

Step 1 : Turn on WIFI module :

Click icone:

Figure 4-1

Step 2: Network configuration

Click icon
Choose option
Obtain IP address via DHCP or specify an IP address.
Click icone ‘OK’ to save configuration.

Step 3: Connect WIFI:

Double click the icon in the task bar.
Choose option ‘Wireless information’ as figure 4-5,choose a wireless Network.
Input password as figure 4-6, click icon ‘OK’ .
Check the IP address after connect to the wireless network successfully as figure 4-7.

How to connect with the Bluetooth printer

Step 1: Turn on Bluetooth printer and let it stay enable pair status
Step 2: Connect to Bluetooth printer

Turn on PDA Bluetooth module.
Click icon search for Bluetooth Device to search Bluetooth device.
Click icon connect to connect with relevant Bluetooth device.
Input password which displayed in the printer screen.

How to Set Shortcuts and Auto Run

Shortcuts :

Click icon
Click icone
Choose related application program and finish relevant configuration.

Auto Run:
There are three methods to set Auto Run :

Put the application program in the folder Storage CardAUTORUN, and” name it as APP.EXE ;
Click icon ,Choose related application program and finish relevant configuration,then reboot the device.Click icon AutoRun to remove all Auto Run.
Set Auto Run via API,please refer to SDK.

How to Turn on/off 1D Scan Engine

Turn on 1D Scan Engine
Click icone :

Turn off 1D Scan Engine
Click icon :

How to Turn on/off 2D Scan Engine

Turn on 2D Scan Engine
Click icone :

Turn off 2D Scan Engine
Click icone :

Set up ActiveSync Mode USB Disk Mode

Click icon :
Note:Please disconnect the device with PC before you do following configuration.

Choose USS Disk Mode.
We could find the Disk in the ‘My Computer’ ,then can send and receive data from PC. ActiveSync Mode: We need to install softvare Microsoft ActiveSync in PC,connect to PC via USS cable.then we will find the icon in the PC taskbar.

How to send 1D barcode data information with function Remote Desktop Connection to PC

Click icon :

How to send 2D barcode data information with function Remote Desktop connection to PC