ARCTIS
PRODUCT INFORMATION GUIDE
STEELSERIES ENGINE
To enjoy , and custom audio effects on your new Arctis 7 headset, download SteelSeries Engine at
WELCOME TO ARCTIS.
Your new headset is the result of more than 15 years of gaming expertise and our unyielding pursuit of perfection. We poured our hearts into making your new Arctis, giving it the best gaming mice available, 7.1 surround sound, and comfort and style, unlike anything you’ve experienced before.
Product Information Guide
Headset
Wireless Transmitter
Mobile / Console Cable
Micro-USB Charging Cable
SOFTWARE REQUIREMENTS
Platforms:
Windows 7 +
Mac OS X 10.8 +
120 MB of free hard drive space
for installation
SYSTEM COMPATIBILITY
PC / MAC
DTS Headphone: X v2.0 is available
for Windows 7-10 only. Software
installation required
PRODUCT OVERVIEW
*selected accessories available at
CHARGING
POWER ON / OFF
PAIRING
MICROPHONE
SKI GOGGLE HEADBAND
accessory headbands available at
SYSTEM SETTING: WINDOWS
Go to Sound Settings
Under ‘Playback’ highlight Arctis 7 Game Audio and select ‘Set Default’
Under ’Recording’ highlight Arctis 7 Microphone and select ‘Set Default’
In your VoIP (chat) application select Arctis 7 Chat Audio as the default audio device
SYSTEM SETTING: MAC
Go to System Preferences > Sound
Under ‘Output’ select Arctis 7 Game Audio
Under ‘Input’ select Arctis 7 Microphone
In your VoIP (chat) application select Arctis 7 Chat Audio as the default audio device
Europe – EU Declaration of Conformity Hereby, SteelSeries ApS. declares that the equipment which is in compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https:// steelseries.com/
SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.
Frequency bands and Powers (Headset and Transceiver)
a. Frequency band(s) in which the radio equipment operates:
• WIFI: 2.400 – 2.4835 GHz
b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
• WIFI:9.57 dBm +2 dBm
c. Software Version: V1.16
WEEE
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service, or the shop where you purchased the product.
Safety Guideline for Lithium Battery
Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service, or the shop where you purchased the product.
“CAUTION!” Risk of explosion if the battery pack is not replaced by the same type as specified by the manufacturer. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
Please keep this battery pack away from fire and high heat sources due to an explosion that might happen. Do not place your battery pack close to any heater or hot location. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
This battery pack shall not be exposed to moisture, dripping or splashing. If any electrolyte flow out of this battery pack when touch the user’s eyes and skin, please seek medical advice immediately.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
Headset FCC ID: ZHK-HS00013
Transceiver FCC ID: ZHK-HS00013TX
More information and support from https:
Industry Canada Statement:
This device complies with RSS standards of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
learn more at steelseries.com
