INSTRUCTION MANUAL
12V Ride-On with Remote
SKY5506 + SKY5507 + SKY5508 + SKY5509 + SKY5510 + SKY5511
As shoppers, we’re always trying to find the perfect balance between quality & value. At BCP, we believe we’ve achieved that. Our diverse catalog of everyday essentials is tailored especially to our customers & guaranteed to hit that sweet spot of high quality & low price.
Always
Charge for 12 hrs before initial use.
After initial charge, follow the normal recommended charging time.
SAFETY
Please retain these instructions for future reference.
This vehicle must be assembled by an adult who has read and understood the instructions in this manual. Keep the packaging and bags away from children and dispose of all packaging before use. Always use common sense and safe practices when operating this vehicle. This product contains or emits chemicals known in the state of California to cause cancer or birth defects or other reproductive harm.
NOTE: For best performance, only use this vehicle on flat and hard surfaces.
AGE RANGE: 3 to 8 years old
WEIGHT CAPACITY: 61 lbs.
The following safety hazards may result in serious injury or death:
- This product contains small parts. Keep children away during assembly. Make sure to remove all packaging material and parts from underneath the vehicle body.
- Never open the battery. Batteries contain lead and lead compounds (acids) that are toxic and corrosive, and known to the state of California to cause cancer and reproductive harm.
- Limbs, hair, and clothing can get caught in moving parts. Always wear shoes, keep limbs away from moving parts, and do not wear loose clothing while operating this vehicle.
- This vehicle does not have brakes or braking capability. Do not leave a child unattended during operation. Do not use this in a location that may require braking capability, as this could result in loss of control, which may cause serious injury or death.
- Use of this vehicle near streets, motor vehicles, steps, bodies of water, sloped surfaces, hills, wet areas, flammable vapors, in alleys, at night, or in the dark could result in an unexpected accident.
- Use of this vehicle in unsafe conditions such as snow, rain, loose dirt, mud, sand, or gravel may result in an unexpected accident such as tipping over, and could damage the electrical system or battery.
- Do not operate this vehicle in an unsafe manner. Examples include but are not limited to:
♦ Pulling the vehicle with another vehicle or similar device
♦ Allowing more than one rider
♦ Pushing the user
♦ Traveling at an unsafe speed
BATTERY WARNINGS
The following safety hazards may result in serious injury or death:
- Use of a battery or charger other than the supplied rechargeable battery and charger may cause a fire or explosion. Only use the supplied battery and charger.
- Use of the rechargeable battery and charger for any other product may result in overheating, fire, or explosion. Never use the supplied rechargeable battery and charger with another product.
- Explosive gases are created during charging. Charge the battery in a well-ventilated area. Do not charge the battery near heat or flammable materials.
- Contact between the positive and negative terminals may result in fire or explosion. Avoid direct contact between the terminals. Picking up the battery by the wires or charger can cause damage to the battery and may result in a fire. Always pick up the battery by its case or handles.
- Liquids on the battery may cause fire or electric shock. Always keep all liquids away from the battery and keep the battery dry. Contact or exposure to battery leakage (lead acid) may cause serious injury. If contact or exposure occurs immediately call your physician. If the chemical is on the skin or in the eyes, flush with cool water for 15 minutes. If the chemical was swallowed, immediately give the person water or milk. Do not give water or milk if the patient is vomiting or has a decreased level of alertness. Do not induce vomiting.
- Battery posts, terminals, and related accessories contain lead and lead compounds (acid) – chemicals known to the State of California to cause cancer, reproductive harm, and are toxic and corrosive. Never open the battery.
- Tampering or modifying the electric circuit system may cause a shock, fire or explosion and permanently damage the system. Exposed wiring and circuitry in the charger may cause electric shock. Always keep the charger housing closed.
WARNING
To reduce the risk of injury, adult supervision is required. Never use on roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.
- Never leave a child unattended.
- Always sit in the seat when using this vehicle.
- Keep your hands, hair, and clothes away from moving parts.
- Children under 3 years of age cannot use the vehicle.
- Only drive on level ground.
- Do not drive the vehicle into loose dirt, mud, sand, fine gravel, or on wet surfaces.
SPECIFICATIONS
Weight | 32 lbs. |
Weight Capacity | 61 lbs. |
Age Range | 3 – 8 years old |
Max Speed | 2.8 mph. |
Initial Charge Time | 12 hours |
Charging Time | 8 – 12 hours |
Run Time | 1 – 2 hours |
Battery Type | 12V 4.5AH |
Electric Motor | 12V |
Charger | Output: DC 12V |
Material | PP Plastic, Metal |
WARNING (ADULT ASSEMBLY REQUIRED ) |
WARNING CHOKING HAZARD – Small parts. Not for children under 3 years old. |
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
- Flip vehicle over and lay it on a level surface. Remove all parts and packaging from the vehicle body. Lift the rear gearbox frame. Remove two screws from the mounts, insert the gearbox frame into the mounts, then replace the screws to attach the frame. Insert the gearboxes into their designated slots.
- Remove the nuts/washers from the part A rear axle. Slide the rear axle through the gearboxes. Make sure rear axle is positioned evenly on each side.
- Slide a part B wheel onto the rear axle and secure it by replacing a nut/washer. Snap on a part C cap. Repeat on the other side.
NOTE: Use two plastic wrenches (one on each side) and rotate in opposite directions to tighten nuts.
- Remove two nuts from the bottom of the part D front axle. Remove the nut on the steering column.
Insert the front axle and two part 1 springs into the front frame. Insert the steering column into the designated hole on the front axle. Replace the nuts on the front axle/steering column to secure it in place. - Remove the nuts/washers from the part D front axle. Slide a part B wheel onto the front axle and secure it by replacing a nut/washer. Snap on a part C cap. Repeat on the other side.
- Flip the car onto its wheels. Join the connector from the part E steering wheel to the connector from the steering mount.
Remove the nut and bolt from the steering wheel, slide it on the steering mount, and then replace the nut and bolt to secure it.
- Snap on the part F windshield and part G side mirror set.
- Within the seat, insert the connector from the battery into the designated terminal on the circuit board.
NOTE: Make sure the connector is oriented correctly to fit into the terminal.
- Attach the part H seat with two part 2 screws.
- Attach the part I backrest with two part 2 screws.
- Slide two part L frame lights onto the part K back bar. Slide the back bar into two part J back frames.
Insert the back frame assembly into the rear of the car.
CHARGING INSTRUCTIONS AND WARNINGS
- Charging port is located below the seat. Insert one end of the charger into the charging port and plug the other end into a wall outlet.
- Charge the battery 12 hours before initial use.
- On average, you will need to charge the battery between 8 and 12 hours. Do not charge the battery for more than 20 hours. Failure to charge the battery as directed could cause permanent damage to the battery and void the warranty.
- Damage to the battery may occur if it is allowed to drain completely. Do not allow the battery to drain completely.
- Check the battery and charger (supply cord, connector) for wear and damage before charging. Do not charge the battery if damage has occurred.
- Only an adult who has read and understood the safety warnings should handle, charge and recharge the battery.
CARING FOR YOUR RIDE-ON
- Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
- Do not leave the vehicle in the sun for long periods of time or fading may occur. Store in shade or cover with tarp.
- Do not wash the vehicle with a hose.
- Do not wash the vehicle with soap.
- Charge battery at least once a month to prolong the life of the battery.
DASHBOARD DIAGRAM
- Push down on the pedal to drive forward/reverse. Release the pedal to slow down and stop.
MEDIA PLAYER
- Back/Volume-: Short press to play the previous song/radio station, long press to decrease volume
- Play/Pause/Seek: Play/pause music, seek radio stations
- Forward/Volume+: Short press to play the next song/radio station, long press to increase volume
- Mode: Press to toggle between music and FM radio
BLUETOOTH
- Place your desired audio device near the media player and power the car on.
- Press Mode on the media player and wait until you hear “Bluetooth device is ready to pair.”
- On your desire audio device, locate the Bluetooth setting and select the device named “Best Choice Products Ride On.”
- When the device says “Your Bluetooth device is connected successfully,” select the desired song.
REMOTE CONTROL
- Remote control operation will OVERIDE manual operation; the pedal will not work when operating the remote control.
- After a period of non-operation, the remote will go into power-saving mode.
Linking the remote control:
- Turn the vehicle of.
- Install 2 AAA batteries into the remote control and the indicator lights will flash.
- Turn the vehicle on. The indicator lights will turn solid indicating a successful link.
- If the indicator lights continue to flash (indicating an unsuccessful link), remove and reinsert batteries and repeat steps 1 to 3.
TROUBLESHOOTING
PROBLEM | REASON | SOLUTION |
Vehicle does not move | Low battery | Fully charge the battery |
Electrical protection | Stop use for several minutes and restart | |
Switch not in the correct position | Completely press in switches | |
Battery connectors disconnected | Plug in battery connectors | |
Battery does not recharge | Battery connectors disconnected | Plug in battery connectors |
Charger not connected to socket or outlet | Completely plug in the charger | |
Battery does not last | Battery does not have a full charge | Fully charge the battery |
Battery is warm and makes a slight noise while charging |
Normal | Normal |
Slow speed | Low battery | Fully charge the battery |
Overloaded vehicle | Reduce the weight on the vehicle | |
Uneven or sloped road | Drive on flat pavement | |
Vehicles shakes while driving | Loose connection to motor | Ensure the motor is properly connected to the battery |
Difficulty shifting between forward/reverse | Attempting to shift while vehicle in motion | Only shift when the vehicle is at a stop |
Vehicle is silent | Steering wheel is not properly connected | Properly connect the steering wheel connector |
WARNINGS REGARDING BATTERIES
- Do not mix alkaline, standard (carbon zinc) and rechargeable (nickel hydride) batteries.
- Do not mix old and new batteries.
- Non-rechargeable batteries should not be charged.
- Rechargeable batteries should be charged under adult supervision only.
- Exhausted batteries should be removed.
- The supply terminals should not be short-circuited.
- Do not put batteries next to or in a heat source (fire, electronic heating device, etc.).
- Do not hit batteries against hard objects.
- Do not submerge batteries in water.
- Batteries should be inserted with the correct polarity.
CALIFORNIA PROPOSITION 65 WARNING:
Battery posts, terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm, and are toxic and corrosive. Wash hands after handling. For more information go to www.P65Warnings.ca.gov
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit difierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Responsible party (contact for FCC matters only):
Quality Control Dept.
15101 Red Hill Ave.
Tustin, CA 92780
Check out more great products: bestchoiceproducts.com
Earn points while you shop. Join today!
Give your friends 15% of their first order!
For each successful referral you’ll receive 100 points.
bestchoiceproducts.com
Question about your product? We’re here to help. Visit us at:
help.bestchoiceproducts.com
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.