8BitDo NES30 Classic Controller Manual

8BitDo NES30 Classic Controller Instruction Manual

Bluetooth Connection

• Controllers will auto reconnect to your devices once they have been paired.

Android (D-Input)

1. Press and hold START for 1 second to power on the controller, LED will blink once per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo NES30 GamePad] or [8Bitdo FC30 GamePad].
4. LED will be solid blue when connection is successful.
   • USB Connection: connect your 8Bitdo controller to your Android device via USB Cable after step 1.

   Windows (X-Input)

1. Press and hold START + X for 1 second to power on the controller, LED will blink twice per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo NES30 GamePad(x)] or [8Bitdo FC30 GamePad(x)].
4. LED will be solid blue when connection is successful.
   • USB Connection: connect your 8Bitdo controller to your Windows device via USB Cable after step 1.

macOS

1. Press and hold START + A for 1 second to power on the controller, LED will blink three times per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller).
4. LED will be solid blue when connection is successful.
   • USB Connection: connect your 8Bitdo controller to your macOS device via USB Cable after step 1.

Switch (by default)

1. Press and hold START +Y for 1 second to power on the controller, LED will blink four times per cycle.
2. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order.
3. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
4. LED will be solid blue when connection is successful.
   • When connected to your Switch, DOWN+SELECT = Switch HOME button.

Battery

Status	LED Indicator
Low battery mode	LED blinks in red
Battery charging	LED blinks in green
Battery fully charged	LED stops blinking in green

• Built-in 480 mAh Li-on withl8 Hours of play time.
• Rechargeable via USB cable with 1 — 2 hour charging time.
• Press START for 8 second to force turn off your controller.

Power Saving

1. Sleep mode – 1 minute with no Bluetooth connection.
2. Sleep mode – 15 minutes with Bluetooth connection but no use.
   • Press START to wake up your controller.

Support

• Please visit http://support.8bitdo.com for further information and additional support. a