User Manual
True Wireless Earbuds
Thank you for purchasing the BC MASTER BC-T05 True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.
Package Contents
True Wireless Earbuds
Charging Case
Three Pairs of Ear-Tips (S/M/L)
USB-A to C Cable
User Manual
Quick Start Guide
Warranty Card
Product Diagram
Earbuds
| Model | BC-T05 |
| Technology | BT5, A2DP, AVRCP, HFP, HSP |
| Driver (each channel) | 1x 7.2mm speaker driver |
| Sensitivity | 105 ± 3dB |
| Frequency Range | 20Hz – 20kHz |
| Impedance | 16ohm ± 15% |
| Microphone Type | MEMS (microphone chip) |
| Microphone Sensitivity | -19dB ± 4dB (at 1kHz) |
| Microphone Frequency | 300Hz – 3kHz |
| Charging Time | 1.5 hours |
| Battery Life | Up to 5 hours |
| Battery Type | Li-polymer (2 x 43mAh) |
| Operating Range | 10m / 33ft |
| IP Rating | IPX5 |
| Weight | 7.16g （pair ） |
Charging Case
| Charging Input | DC 5V |
| Charging Time | 2.5 hours |
| Battery Type | Li-polymer (600mAh) |
| Number of Earbuds Recharges | 5 times (pair) |
| Weight | 33.28g |
Getting Started
Charging
Fully charge the charging case before first use. To charge, connect the case to a USB charger or charging port with the included USB-A to C Cable. When all 3 LED charging indicator lights are white, the case is fully charged. Charging takes around 2.5 hours; and after being fully charged, the case can fully charge the earbuds 5 times. The earbuds should be stored in the case when not in use.
Note: Remove the protective film from the earbuds when using it for the first time.
Turning On / Off
| Turn On | Remove both earbuds from the charging case, or touch and hold on the touch-sensitive panels on both earbuds for 2 seconds when they are turned off |
| Turn Off | Return both earbuds to the charging case, or touch and hold on the touch-sensitive panels on both earbuds for 5 seconds when they are turned on |
Pairing
Starting with the earbuds in the case:
- Take the earbuds out of the case.
- Turn on the pairing function on the device you want to pair with the earbuds
- From the list of available devices, find and select “BC-T05”
- If a code or PIN is required for pairing, enter “0000”
Regular Use After Pairing
Once the earbuds are successfully paired with your device, they can be switched on and off as follows:
- Take the earbuds out of the charging case, and they will turn on and connect with each other automatically
- To power off, put the earbuds back in the charging case, and they will begin charging
Using the Left/Right Earbud Only
Starting with the earbuds in the case:
- Take the left/right earbud out
- Turn on the pairing function on the device you want to pair with the earbud
- From the list of available devices, find and select “BC-T05”
Notes
- When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found
- To clear the pairing list, touch and hold the touch-sensitive panels on both earbuds for 10 seconds when they are in the changing case
- In pairing mode, the earbuds will automatically turn off after 5 minutes if no devices are paired
- If one of the earbuds has no sound output, put both earbuds back in the charging case and take them out again
- The wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 2 minutes. The earbuds will automatically reconnect to the last paired device. To connect with other devices, repeat the previous pairing steps
Controls and LED Indicators
Streaming Audio
Once paired, you can wirelessly stream audio from your device to the earbuds. Music will automatically pause when you receive an incoming phone call and resume once the call has ended.
| Play or pause | Tap the touch-sensitive panel on either earbud |
| Skip to the next track | Double-tap the touch-sensitive panel on the right earbud |
| Skip to the previous track | Double-tap the touch-sensitive panel on left earbud |
Streaming Audio
| Answer or end a call | Double-tap the touch-sensitive panel on either earbud to answer or end a call |
| Reject an incoming call | Touch and hold on the touch-sensitive panel on either earbud for 1 second |
| Use Siri or other voice assistants | While your device is connected, triple-tap the touch-sensitive panel on either earbud |
| LED Status Indicator (Earbuds) | Status |
| Flashing red and white quickly | Reconnecting |
| Flashing white | Pairing mode |
| Solid red | Earbuds charging |
| Solid white for 1 minute then turn off (after charging) | Earbuds fully
charged |
| LED Charging Indicator (Charging case) | Status |
| Flashing white | Case charging |
| Solid white for 10 seconds then turn off | Case fully charged |
Note: the color of the LED indicator varies when the color of earbuds change.
FAQ
The earbuds are on, but not connecting to my device For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.
I’ve connected the earbuds with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the arbuds as an audio output device before the audio can
be transmitted. If you’re using a music player or other device, please make sure it supports the A2DP profile.
The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range-related issues.
What’s the wireless range of the earbuds?
The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.
The earbuds won’t turn on
Try charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address given in Warranty & Customer Support.
I put the earbuds back in the charging case, but the earbuds are still connected
The charging case is probably out of power. Try charging it.
Product Care and Use
- Keep away from liquids and extreme heat
- Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss
Warranty and Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model
number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
*Please note, BC MASTER can only provide after-sales service for products purchased directly from BC MASTER. If you have purchased from a different seller, please contact them directly for service or warranty issues.
CE Statement
Max RF power level:
BT classic (2402–2480MHz): 2.1dBm RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS. Excessive sound pressure from earphones and headphones can cause hearing loss.
Hereby, Dongguan Xingji Electronics Co.,Ltd. declares that the radio equipment type (True Wireless Earbuds, BC-T05) is in compliance with Directive 2014/53/EU.
Notice: This device may be used in each member state of the EU.
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
– Reorient the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
www.bc-master.com | [email protected]
Dongguan Xingji Electronics Co.,Ltd
First Building of Huaxin Industrial Park Luxi Village Gaobu,
Dongguan, Guangdong 523000 CN
FCC ID: 2AW44-BCT05
