Instruction
Functional
Month-day-week- hour -minute – second 12H
Analog set: hold S1 to adjust the analog quartz
Back-light: press S3
Mode covert : press S4
Time and Date setting
In normal mode:
Press S4 three times enter into setting mode ,at same time the “seconds” flashing;
Press S2 once ,and the “minute “flashing ; press s3 to adjust minutes
Press S2 once ,and the “hour ”flashing; press s3 to adjust hour.
Press S2 once ,and the “day” flashing; press s3 to adjust day.
Press S2 once ,and the “month “flashing ; press s3 to adjust month.
Press S2 once ,and the “week” flashing; press s3 to adjust week.
After set all the data, press S4 to exit.
Alarm setting
Hours: In normal display Mode, S4 twice and “the hours” flashing press S3 to adjust hour of the alarm. Pay attention to AM/PM
Minutes: press S2 and the “minutes” flashing. Press S3 to adjust minutes.
Alarm ON/OFF
In normal display Mode, hold S3 and S2 ,if display “alarm symbol” means turn on the Alarm, otherwise means turn off the Alarm function
Chime ON/OFF
In normal display Mode, hold S4 and S2 ,if all icon of week appear means Chime ON, the same action, if the week’s icon disappears, means OFF of the Chime.
Chronograph
In normal display mode: press S4 once , enter chronograph mode , press S3 to start, press S3 to suspend,
press S3 to continue ,press S3 to stop, press S4 twice to read the record . Press S2 to return to chronograph mode
(0:00 00)section ,The same action continue recording the second record.
