duoCol ELK-BLEDOM Strip LED Lights [Richsing] manual

Specifications:

• 32.8ft(2-Pack) SMD2835 Bluetooth LED Strip lights
• Color: R,G,B and RGB combination(R+G+B,R+G,R+B,G+B)
• Package Include: 2* 5M/16.4ft led strip lights,1*DC 12v power adapter ,1* Y splitter,1* controller,1* receive box
• LED Quantity:300LEDs per roll
• Waterproof Rate: IP65
• View angle: 120 Degree
• Working Voltage: DC 12V
• Working Temperature: -20℃ to 50℃
• Lifespan: 30,000 hours or 3 years on average.

How to connect the lights:
Step 1: Download “duoCol Strip” APP by scanning the QR code on the controller. Support Android or IOS. An alternative app may be “LED BLE” on iOS or Android App Store.
Step 2: Turn on your phone Bluetooth, connect to the device “ELK-BLEDOM”.
Step 3: Open the APP.
If you can’t fine “ELK-BLEDOM”, you can reset Bluetooth controller to the default by plug and unplug the connector four times, wait for 1 to 3 seconds each time you plug/unplug the connector.

duoCol Strip app on Google Play

duoCol Strip app on iOS App Store

Important Notes:
Be sure to use the white splitter line in the package connect it separately, instead of connecting the led strip lights all together(end to end), Otherwise, some of the lights will vary dim or not work.

This is a type of 2835SMD RGB led strip, different from 5050SMD with cold white, there’s no white mode for the 2835SMD. When you press the white key, the light strip will turn Red+Green+Blue, other colors are from the combination of red, green and blue in a different type.

This light strip doesn’t have remote. Control the light strip by scanning the QR code download “duoCol Strip” APP on the instruction manual.

If you can’t find the Bluetooth device, you can try reset the Bluetooth controller by plug and unplug the connector four times, wait for 1 to 3 seconds each time you plug/unplug the connector.