W-KING D8 Outdoor Wireless Speaker
W-KING D8 Outdoor Wireless Speaker
Thank you for purchasing the W-YJNG DS Outdoor Wireless Speaker. Please read this user manual carefully and keep It for titre reference. If you need any assistance, please contact our support learn with your product model number end order number.
Customer Support E-mall: Amazon E-mail: [email protected]
Walmart E-mail: [email protected]
Package Contents
06 Outdoor Wireless Speaker
USB type-C Charging Cable
3.5mm Audio Coble
User Manual
Product Diagram
Specifications
Charging
Fully charge this speaker before first use. Connect it too USB charger or charging port with the included USB Type-C charging coble to charge. When there ore 3 solid white lights, your speaker Is filly charged and ready for use. Charging takes around 4 hours.
Note
Please use 5v /2A power adopter to charge your speaker. Power adopter is NOT INCLUDED.
Power On / Off
Long press the ON/OFF button r or 2-3 seconds lo power on or off (LED indicator flashes blue or off)
Paring
- When you tum on the speaker. the speaker Will automatically enter poking mode one the LED indicator ,viii start to flash blue rapidly
- Activate the pairing function on your phone or other compatible device and select “W-KING D8”
- If a code 01 pin Is required for pairing, please enter “0000”
- When successfully paired, the LED indicator will stay blue
Notes
- To reset the speaker (to clear the pairing list or only program errors), use a slroigh1ened paper clip or a loa1hpick lo carefully short-press the reset hole
- The speaker will automatically shut down offer 10 minutes in pairing mode if no devices ore paired If your paired device is switched off or manually disconnected. the speaker will en1er pairing mode and automatically shut down often 10 minutes
- If the speaker or connec1ed device exceeds the operating range, the speaker will disconnec1. The connection 10 the las! successfully connected device will be re-established once you re-enter wireless range within IO minutes. To connect to other devices. please repot the previous “Pairing” steps
Playing Audio via Audio Input Connection
- Connect the 06 to your PC, laptop, or other device with audio output port using the included 3.5mm audio cable
- Long press the on/off button for 2-3 seconds to turn on. one the LED indicator will light up solid green
Notes
- The speaker will disconnect from your phone or other paired device when on audio cable is plugged into I he audio input I jock
- When playing audio using the audio input jack. press !he volume + /- to adjust !he volume and short-press ploy/pause to pause or resume. Next/previous track control on the $peaker is disabled in audio input mode
- For some computers. you may need to access the audio control panel lo manually set The speaker as !he default audio device
Charging Phone/Tablet
- Connect your phone/1oblet to the use port of the D8 speaker
- Turn on !he speaker. your device will be charged automatically
- Turn off the speaker 1o discharge your device
Adjust Sound Effect
Short press the sound effect button ” ↑↓↑ ” to adjust sound effect
True Wireless Stereo Pairing
- Turn on both of your D8 speaker simultaneously, you will see l:>lue LED indicator flashes rapidly on 1he low devices
- Select one speaker as the leading speaker, double press the ON/OFF bu1ton to s1orl pairing.
- After successfully paired, the blue LED Indicator of !he leading speaker flashes slowly and the secondary specked LED keeps bright blue
- Turn on your phone’s Bluetooth, search “W-Kiting D8” one connect. The blue LED indicator of the leading sealed keeps bright. The two speakers will play music almuttoneously when complete pairing
- To disconnect True Wireless Stereo pairing, press the volume button “+”and”-” at the some time, you will see blue LED flashes rapidly on the secondary speaker. that means True Witless Stereo unpaired successfully
Controls and LED Indicators
Product care and Use
- Keep away from liquid’s. extreme heat. and strong magnetic fields
- Do not use this speaker al high volume for extended periods, os this may cause permanent hearing damage or loss
Warranty and Customer Support
For questions, support, or warranty claims. con1ocl us at
Amazon E-mal: [email protected]
Walmart E-man: [email protected]
Please contact us with your region, order number and product model.
P1eose note, W-KING con only provide otter soles service for products purchased directly from our official online store. If you have purchased from o different seller, please contact them direct tor service or warranty issues.
Notice for US
Changes or modifications not expressly approved by the party responsible for compliance could void Lite user’s authority to opero1e 1he equipment. This device complies with Port 15 of !he FCC Rules. Operation is subject to the following low conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received. including interference that may cause undesired operation
FCC Rules
This equipment has been tested and found to comply with the limits for c Closes B digital device. pullicat to port 15 of the FCC Rules. These limits are designed lo provide reasonable protection agoinS1 harmful interference in o residential installation. his equipment generates uses and can radiate radio frequency energy and, if not installed one used in accordance wi1h the instructions, may cause harmful interference to radio communications. However. there is no guarantee !hot interference will no1 occur in o particular inslollo1ion. If this equipment does cause hamaul Interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to con-ect the interference by one or more of the following measures:
- Reorien1 or relocate the receiving antenna
- Increase the separo1ion between the equipment and receiver
- Connect 1he equipment into an outset on o circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician tor help
Caution
Changes or modifications mode to this device not expressly approved by W-KING may void the FCC oulhorizo1iort to operate this equipment.
Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by SHENZHEN WEIKING TECHNOLOGY CO., LTD may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The device compliance RF exposure requirement and can installed and used without restriction
CN, 516109, Guongdong, Shenzhen, Longhua, Fucheng Street.
Zhongge Community, Zhongge Rood, N0.142. Building I, Room 301
Tel: +86-755-36690577
Fax: +86-755-36815032
Amazon E-mail: [email protected]
Walmart E-moil: [email protected]
WWW.w-king.com
FAQ’S
How do I reset the speaker?
Please long press the ON/OFF button r or 2-3 seconds lo power on or off (LED indicator flashes blue or off)
How do I turn on the speaker?
Please long press the ON/OFF button r or 2-3 seconds lo power on or off (LED indicator flashes blue or off)
How do I turn off the speaker?
Please long press the ON/OFF button r or 2-3 seconds lo power on or off (LED indicator flashes blue or off)
How do I pair my device with the speaker?
When you turn on the speaker, it will automatically enter pairing mode. Activate the pairing function on your phone ore other compatible device and select “W-KING D8” as your Bluetooth device. If a code 01 pin is required for pairing, please enter “0000” as the code. When successful, you will hear a beep and see three solid white lights.
Please long press the ON/OFF button r or 2-3 seconds lo power on or off (LED indicator flashes blue or off)
What if I can’t get any sound from my speaker?
Please try to move your device closer to the speaker and make sure that it is within range of your device. If that doesn’t work, please try to restart your device and then try again. If you are still having trouble getting sound from your speaker, please contact our support learn with your product model number end order number.
How do you pair W king D8 Speaker?
So you need to pair both of them first how do i how do i do that turn both of them on choose one to press again and then once you hear the sound they’re connected so i hope this helps. And uh what
How do I increase the bass on my Bluetooth speaker?
The placement of a Bluetooth or wireless speaker also has a major impact on the reproduction of the low frequencies. Indoors, you can easily boost the bass by placing the speaker up against a wall or, even better, in a corner. The wall will reflect and artificially amplify the low frequencies.
Why is my speaker really quiet?
Speaker is clogged with dirt
If your phone speaker volume remains low even after turning the volume to the highest, your phone speaker may be clogged. The speaker usually has a net mesh covering it, and if this becomes clogged with dirt and/or oils, it reduced the sound that comes out of the speaker
What are the common problems of the speakers?
Common speaker problems include a lack of audio output, audio distortion, blown speakers, no bass or treble, and popping sounds. You can fix these issues by changing the output channels, lowering the volume, or replacing the coils, wires, and fabric. High volume can instantly damage new speakers.
Can a Bluetooth speaker be repaired?
To fix a Bluetooth speaker that won’t charge, you will have to install software updates, replace the battery, buy a new cable, repair a cracked solder joint, replace the charging port, and replace the charging circuit.
What to do if Bluetooth speaker is not working?
Step 1: Check Bluetooth basics
Turn Bluetooth off and then on again. Learn how to turn Bluetooth on and off.
Confirm that your devices are paired and connected. Learn how to pair and connect via Bluetooth.
Restart your devices. Learn how to restart your Pixel phone or Nexus device.
Why is Bluetooth not finding devices?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
How do I put my speakers in pairing mode?
Press and hold the (power) PAIRING button until you hear beeps and the (BLUETOOTH) indicator begins to flash quickly in white. The speaker enters pairing mode. Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
VIDEO
W-KING D8 Outdoor Wireless Speaker
www://w-king.com/