akasa USB 3.0 Card Reader and HUB with Smart Card Reader User Manual
AK-HC-07BK
Caution
Electrostatic discharge (ESD) can damage PC components. If an ESD controlled workstation is not available, wear an antistatic wrist strap or touch the earthed surface before handling any PC components. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Content
- Internal Device
- Screws
- User Manual
Front Panel
- USB 3.0 Memory card reader slot
- smart card reader slot
- USB3.0 hub
- charging port
Insert the card into corresponding port in the direction matching the port shape.
Compact Flash card Insertion
The card has two side slots, one is narrow and the other is wider. Make sure the narrow slot is on the right when inserting the card into the reader slot.
The arrows 
printed next to the slots indicate the card/drive insertion direction (contact points). means that the contact points are on the bottom of the slot, means that the contact points are on the top of the slot. Insert the card into corresponding port in the direction indicated by the arrows.
Rear Panel
- a. USB 3.0 cable
- b. Power cable
- c. USB Cable
- d. SATA power Cable
Installation
If the connectors are not apparent on the board consult your motherboard manual. Connecting the panel to the wrong headers may result in motherboard damage.
Warranty
Warranties extend only to defects that occur during normal use and do not extend to damage to products that results from incompatibility, abuse, misuse, negligence, unauthorized repair, modification, incorrect installation, incorrect voltage supply, air/water pollution, any accident or natural disasters.
The warranty extends only on (the specific) Akasa product and does not cover a defective CPU, motherboard etc. as a result of a defective product or power adapter. Keep your original sales receipt in a safe place. Nothing herein should be construed as constituting an additional warranty.
