Learn all about the Amazon Smart Speaker w/ EchoDot 4th Generation in this digital user guide. It features a very simple getting started guide along with how to register your device.
Amazon B7W644 Smart Speaker with EchoDot 4th Generation User Guide
WHAT’S IN THE BOX
- Device
- Power adaptor
PLUG IN YOUR DEVICE
- Plug the included power adapter into the Device and then into a power outlet.
- Wait until the device boots up.
SETUP DEVICE
- Follow the app instructions to set up the Device.
- During setup, you will connect the device to the Internet.
- To change your settings, by use the app to choose your device settings.
REGISTERING YOUR DEVICE
To use many of the Device features, you must register it to your account. If you have not yet registered, please do so. Prior to registering, connect to a Wi-Fi network by following the “Setup Device” instructions above.
IMPORTANT PRODUCT INFORMATION
For safety, compliance, recycling, and other important information regarding your Device, please refer to the Legal & Compliance section in the Settings menu of your Device App.
Product Information
Safety and Compliance Information
The Device uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.
FCC Compliance Information
Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid.
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Device is below the radio frequency exposure limits set by the FCC. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
IC Compliance Information
Radio Frequency Information
This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device could automatically discontinue transmission in case of the absence of information to transmit or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.
This device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Products in accordance with your local laws and regulations. For information about recycling the Products, go to www.amazon.com/devicesupport.
Product Specifications
- Model Number: B7W644
- Power: 12VDC 1.25A output power adapter (in-box)
- Operating temperature: 0°C to 35°C
- Connectivity: Dual Band Wi-Fi (2.4/5GHz) 802.11 a/b/g/n/ac; BT BDR/EDR, BLE
