Manufactured by American Standard
BACK-TO-BACK INSTALLATION
Depending upon your plumbing and venting conditions, the flow from the toilet in a back-to-back installation may create a vacuum on the system and draw water from the opposing bowl. The National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over is possible. The code does approve a directional “Y” style fitting with proper venting to direct the water downward and away from the other toilet.
INSTALLATION INSTRUCTIONS:
WARNING: Overtightening of water supply line nuts could result in breakage and potential flooding. If the
connection leaks after hand tightening, replace the supply line. Do not use any type of sealant on the water
supply connection. Use of plumber’s putty, pipe dope, or any other type of sealant will void the warranty.
Please utilize the included signage should you feel it necessary to communicate to users how to activate
the hygienic touchless flush. The signage can be affixed to the top of the tank or around the flush actuator.
