ANKER PowerCore 10000 manual

ANKER PowerCore 10000

Using Your PowerCore

To preserve battery lifespan, use and recharge at least once every 4 months.

Check the power level

Charge your phone or tablet

No Lightning cable included.

Recharge your PowerCore

To give your PowerCore the fastest, safest recharge, use an Anker® USB charger.

Speciﬁcations

Attention

Use original or certiﬁed cables

Do not expose to liquids

Do not disassemble

Avoid dropping

Avoid extreme temperatures

Customer Service

18-month limited warranty

Lifetime technical support

For FAQs and more information, please visit:

anker.com/support

[email protected]

1-800-988-7973 | Mon-Fri 9:00-5:00 PST (US)

DOWNLOAD RESOURCES

ANKER PowerCore 10000 [pdf] User Guide A1263, SM-A329-V03, PowerCore 10000
Read more: https://manuals.plus/anker/powercore-10000-manual#ixzz7gWCTGLtQ

FAQ’S

How do you know when Anker 10000 is fully charged?

The four LEDs indicate the charging progress. Once the power bank is fully charged, all four LEDs will shut off. A full charging cycle takes about 6-7 hours, depending on the chosen power source (e.g. 5V/2A power charger).

What do the lights on the Anker charger mean?

Steady red light while charging. Steady white light when fully charged. Charging when powered off:
Steady red light when charging.
Light turns off when fully charged.

Do Anker chargers stop charging when full?

It will stop charging the device when the device is fully charged. If you have any further questions, please feel free to contact us via [email protected] or call us at +1 (800) 988 7973. A: On the front where the button is there are 5 lights. Showing how much is left or how charged it is.

Can I use Anker power bank while charging?

You can charge a power bank while using it to charge another device, but this is only possible with a power bank equipped with the pass-through function. Even then, there’s still a risk of battery damage, and you should use this function only when no other option is available.

How do you turn off Anker PowerCore?

You can press the LED and USB buttons to turn them on and off. but while either of them are on the device won’t turn off by itself. Press the USB and LED buttons until their lights are not switched on, wait for a while, and it should switch off automatically.

How do I turn off the light on my Anker charger?

If you briefly press and release it, it displays the level of charge for your Anker. If, on the other hand, you press and hold the button for a second or two, on my charger it activates an LED flashlight. To turn this off, hold the button on the Anker for a second or so.

Does the PowerCore 10000 have a built-in Lightning cable?

A: No, it does not.

What is the difference between a portable charger and a power bank?

There is no difference between a power bank and a portable charger. Both names can be used to refer to the exact same battery pack you use to charge a device. A power bank has several nicknames including: Battery pack.

Why is my Anker charger not charging my phone?

Ensure the outlet you’re connected to is working. If possible, try connecting another device to that outlet to see if it works. If your portable PowerCore charger is not charging quickly, try using another wall charger. A two-amp charger will fully recharge your device over 12 hours.

Why is my Anker battery blinking?

The erratic blinking of these lights can be associated with an issue, which means that your power bank is not charging.

How do I reset my power bank?

Take the USB charging cable provided with your power bank. Insert one end into the USB port on your power bank and plug the other end into the charging port looping the cable around. Leave the cable plugged in almost for 10 seconds. This will reset your device, now restart your power bank and check its performance.

How many hours should a power bank be charged?

Usually, a power bank fully charges in 1-2 hours. Besides, you can check the manufacturer’s instructions. Also, avoid leaving your power bank charging longer than required.